GTX 1050Ti can't plugin-play usb devices
KIRIYAMA Kazuhiko
kiri at truefc.org
Mon Sep 21 11:57:58 UTC 2020
On Mon, 21 Sep 2020 20:07:18 +0900,
Niclas Zeising wrote:
>
> On 2020-09-21 12:54, KIRIYAMA Kazuhiko wrote:
> > On Mon, 21 Sep 2020 16:54:09 +0900,
> > Niclas Zeising wrote:
> >>
> >> On 2020-09-21 08:42, KIRIYAMA Kazuhiko wrote:
> >>> Hi, folks
> >>>
> >>> I've implemented NVIDIA GTX 1050Ti in Supermicro X11SPM-F
> >>> machine and built up X environment on 13.0-CURRENT
> >>> (r363381). All went right and `startx' successfully done.
> >>> But usb tools could not plugin-played. After pull out usb
> >>> and pull in, keyboard, mouse and usbaudio all were not
> >>> responded. I killed X at remote machine, then all worked
> >>> again. Is there any keybord or mouse device fixed by xorg ?
> >>>
> >>
> >> You need to remove the configuration for keyboard and mouse, and have it
> >> use libinput instead, to get auto configuration of input devices in X on
> >> FreeBSD 12.1 and later.
> >>
> >>> /etc/X11/xorg.conf:
> >>> # nvidia-xconfig: X configuration file generated by nvidia-xconfig
> >>> # nvidia-xconfig: version 440.100
> >>>
> >>>
> >>> Section "ServerLayout"
> >>> Identifier "X.org Configured"
> >>> Screen 0 "Screen0" 0 0
> >>> Screen 1 "Screen1" RightOf "Screen0"
> >>> InputDevice "Mouse0" "CorePointer"
> >>> InputDevice "Keyboard0" "CoreKeyboard"
> >>
> >> Remove the two lines above.
> >
> > I've done above:
> >
> > admin at smtp:~[51]% diff -u /etc/X11/xorg.conf.bak /etc/X11/xorg.conf
> > --- /etc/X11/xorg.conf.bak 2020-09-21 17:04:29.389641000 +0900
> > +++ /etc/X11/xorg.conf 2020-09-21 19:43:45.328892000 +0900
> > @@ -6,8 +6,6 @@
> > Identifier "X.org Configured"
> > Screen 0 "Screen0" 0 0
> > Screen 1 "Screen1" RightOf "Screen0"
> > - InputDevice "Mouse0" "CorePointer"
> > - InputDevice "Keyboard0" "CoreKeyboard"
> > EndSection
> >
> > Section "Files"
> > @@ -24,19 +22,6 @@
> > Section "Module"
> > Load "glxserver_nvidia"
> > Load "glx"
> > -EndSection
> > -
> > -Section "InputDevice"
> > - Identifier "Keyboard0"
> > - Driver "kbd"
> > -EndSection
> > -
> > -Section "InputDevice"
> > - Identifier "Mouse0"
> > - Driver "mouse"
> > - Option "Protocol" "auto"
> > - Option "Device" "/dev/sysmouse"
> > - Option "ZAxisMapping" "4 5 6 7"
> > EndSection
> >
> > Section "Monitor"
> > admin at smtp:~[52]%
> >
> > And reboot desktop, but nothing changed. In this case, dmesg
> > as follows:
>
> Can you provide Xorg.log with the new settings?
/var/log/Xorg.0.log:
[ 42717.520]
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[ 42717.520] Build Operating System: FreeBSD 13.0-CURRENT amd64
[ 42717.520] Current Operating System: FreeBSD smtp 13.0-CURRENT FreeBSD 13.0-CURRENT #0 r363381M: Thu Jul 30 16:46:49 JST 2020 root at msrvkxb:/usr/obj/usr/src/amd64.amd64/sys/XIJ amd64
[ 42717.520] Build Date: 24 July 2020 05:37:17PM
[ 42717.520]
[ 42717.520] Current version of pixman: 0.40.0
[ 42717.520] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 42717.520] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 42717.521] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 21 19:45:21 2020
[ 42717.521] (==) Using config file: "/etc/X11/xorg.conf"
[ 42717.521] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d"
[ 42717.521] (==) ServerLayout "X.org Configured"
[ 42717.521] (**) |-->Screen "Screen0" (0)
[ 42717.521] (**) | |-->Monitor "Monitor0"
[ 42717.522] (**) | |-->Device "Card0"
[ 42717.522] (**) |-->Screen "Screen1" (1)
[ 42717.522] (**) | |-->Monitor "Monitor1"
[ 42717.522] (**) | |-->Device "Card1"
[ 42717.522] (==) Automatically adding devices
[ 42717.522] (==) Automatically enabling devices
[ 42717.522] (==) Not automatically adding GPU devices
[ 42717.522] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 42717.522] (**) FontPath set to:
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/,
catalogue:/usr/local/etc/X11/fontpath.d,
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/,
catalogue:/usr/local/etc/X11/fontpath.d
[ 42717.523] (**) ModulePath set to "/usr/local/lib/xorg/modules"
[ 42717.523] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 42717.523] (II) Loader magic: 0x4341b0
[ 42717.523] (II) Module ABI versions:
[ 42717.523] X.Org ANSI C Emulation: 0.4
[ 42717.523] X.Org Video Driver: 24.1
[ 42717.523] X.Org XInput driver : 24.1
[ 42717.523] X.Org Server Extension : 10.0
[ 42717.523] (!!) More than one possible primary device found
[ 42717.523] (--) PCI: (3 at 0:0:0) 1a03:2000:15d9:095d rev 65, Mem @ 0xa3000000/16777216, 0xa4000000/131072, I/O @ 0x00003000/128, BIOS @ 0x????????/65536
[ 42717.523] (--) PCI: (101 at 0:0:0) 10de:1c82:1462:8c96 rev 161, Mem @ 0xdf000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000b000/128, BIOS @ 0x????????/65536
[ 42717.523] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 42717.523] (II) LoadModule: "glxservernvidia"
[ 42717.524] (WW) Warning, couldn't open module glxservernvidia
[ 42717.524] (EE) Failed to load module "glxservernvidia" (module does not exist, 0)
[ 42717.524] (II) LoadModule: "glx"
[ 42717.524] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[ 42717.526] (II) Module glx: vendor="X.Org Foundation"
[ 42717.526] compiled for 1.20.8, module version = 1.0.0
[ 42717.526] ABI class: X.Org Server Extension, version 10.0
[ 42717.526] (II) LoadModule: "nvidia"
[ 42717.526] (II) Loading /usr/local/lib/xorg/modules/drivers/nvidia_drv.so
[ 42717.526] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 42717.526] compiled for 1.6.99.901, module version = 1.0.0
[ 42717.527] Module class: X.Org Video Driver
[ 42717.527] (II) NVIDIA dlloader X Driver 440.100 Fri May 29 08:13:34 UTC 2020
[ 42717.527] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 42717.527] (--) Using syscons driver with X support (version 2.0)
[ 42717.527] (--) using VT number 9
[ 42717.740] (II) Loading sub module "fb"
[ 42717.740] (II) LoadModule: "fb"
[ 42717.740] (II) Loading /usr/local/lib/xorg/modules/libfb.so
[ 42717.741] (II) Module fb: vendor="X.Org Foundation"
[ 42717.741] compiled for 1.20.8, module version = 1.0.0
[ 42717.741] ABI class: X.Org ANSI C Emulation, version 0.4
[ 42717.741] (II) Loading sub module "wfb"
[ 42717.741] (II) LoadModule: "wfb"
[ 42717.741] (II) Loading /usr/local/lib/xorg/modules/libwfb.so
[ 42717.741] (II) Module wfb: vendor="X.Org Foundation"
[ 42717.741] compiled for 1.20.8, module version = 1.0.0
[ 42717.741] ABI class: X.Org ANSI C Emulation, version 0.4
[ 42717.741] (II) Loading sub module "ramdac"
[ 42717.741] (II) LoadModule: "ramdac"
[ 42717.742] (II) Module "ramdac" already built-in
[ 42717.742] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 42717.742] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 42717.742] (==) NVIDIA(0): RGB weight 888
[ 42717.742] (==) NVIDIA(0): Default visual is TrueColor
[ 42717.742] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 42717.742] (**) NVIDIA(0): Enabling 2D acceleration
[ 42717.742] (II) Loading sub module "glxserver_nvidia"
[ 42717.742] (II) LoadModule: "glxserver_nvidia"
[ 42717.742] (II) Loading /usr/local/lib/xorg/modules/extensions/libglxserver_nvidia.so
[ 42717.748] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 42717.748] compiled for 1.6.99.901, module version = 1.0.0
[ 42717.748] Module class: X.Org Server Extension
[ 42717.748] (II) NVIDIA GLX Module 440.100 Fri May 29 08:12:16 UTC 2020
[ 42717.748] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 42718.367] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:101:0:0
[ 42718.368] (--) NVIDIA(0): DFP-0
[ 42718.368] (--) NVIDIA(0): DFP-1 (boot)
[ 42718.368] (--) NVIDIA(0): DFP-2
[ 42718.368] (--) NVIDIA(0): DFP-3
[ 42718.368] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 1050 Ti (GP107-A) at PCI:101:0:0
[ 42718.368] (II) NVIDIA(0): (GPU-0)
[ 42718.369] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 42718.369] (--) NVIDIA(0): VideoBIOS: 86.07.42.00.88
[ 42718.369] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 42718.370] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 42718.370] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 42718.370] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 42718.370] (--) NVIDIA(GPU-0):
[ 42718.400] (--) NVIDIA(GPU-0): BenQ GC2870 (DFP-1): connected
[ 42718.400] (--) NVIDIA(GPU-0): BenQ GC2870 (DFP-1): Internal TMDS
[ 42718.401] (--) NVIDIA(GPU-0): BenQ GC2870 (DFP-1): 600.0 MHz maximum pixel clock
[ 42718.401] (--) NVIDIA(GPU-0):
[ 42718.401] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 42718.401] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 42718.401] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[ 42718.401] (--) NVIDIA(GPU-0):
[ 42718.402] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 42718.402] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 42718.402] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 42718.402] (--) NVIDIA(GPU-0):
[ 42718.408] (II) NVIDIA(0): Validated MetaModes:
[ 42718.408] (II) NVIDIA(0): "DFP-1:1920x1080"
[ 42718.408] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 42718.414] (--) NVIDIA(0): DPI set to (78, 80); computed from "UseEdidDpi" X config
[ 42718.414] (--) NVIDIA(0): option
[ 42718.414] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 42718.414] (II) NVIDIA: access.
[ 42718.421] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 42718.421] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 42718.421] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 42718.421] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 42718.421] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 42718.421] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 42718.421] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 42718.421] (II) NVIDIA(0): Config Options in the README.
[ 42718.458] (II) NVIDIA(0): Setting mode "DFP-1:1920x1080"
[ 42718.509] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 42718.509] (==) NVIDIA(0): Backing store enabled
[ 42718.509] (==) NVIDIA(0): Silken mouse enabled
[ 42718.510] (**) NVIDIA(0): DPMS enabled
[ 42718.510] (II) Loading sub module "dri2"
[ 42718.510] (II) LoadModule: "dri2"
[ 42718.510] (II) Module "dri2" already built-in
[ 42718.510] (II) NVIDIA(0): [DRI2] Setup complete
[ 42718.510] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 42718.510] (II) Initializing extension Generic Event Extension
[ 42718.511] (II) Initializing extension SHAPE
[ 42718.511] (II) Initializing extension MIT-SHM
[ 42718.512] (II) Initializing extension XInputExtension
[ 42718.512] (II) Initializing extension XTEST
[ 42718.513] (II) Initializing extension BIG-REQUESTS
[ 42718.513] (II) Initializing extension SYNC
[ 42718.513] (II) Initializing extension XKEYBOARD
[ 42718.514] (II) Initializing extension XC-MISC
[ 42718.514] (II) Initializing extension SECURITY
[ 42718.515] (II) Initializing extension XFIXES
[ 42718.515] (II) Initializing extension RENDER
[ 42718.516] (II) Initializing extension RANDR
[ 42718.517] (II) Initializing extension COMPOSITE
[ 42718.517] (II) Initializing extension DAMAGE
[ 42718.517] (II) Initializing extension MIT-SCREEN-SAVER
[ 42718.518] (II) Initializing extension DOUBLE-BUFFER
[ 42718.518] (II) Initializing extension RECORD
[ 42718.519] (II) Initializing extension DPMS
[ 42718.519] (II) Initializing extension Present
[ 42718.520] (II) Initializing extension DRI3
[ 42718.520] (II) Initializing extension X-Resource
[ 42718.520] (II) Initializing extension XVideo
[ 42718.521] (II) Initializing extension XVideo-MotionCompensation
[ 42718.521] (II) Initializing extension GLX
[ 42718.521] (II) Initializing extension GLX
[ 42718.521] (II) Indirect GLX disabled.
[ 42718.521] (II) GLX: Another vendor is already registered for screen 0
[ 42718.521] (II) Initializing extension XFree86-VidModeExtension
[ 42718.522] (II) Initializing extension XFree86-DGA
[ 42718.522] (II) Initializing extension XFree86-DRI
[ 42718.522] (II) Initializing extension DRI2
[ 42718.523] (II) Initializing extension NV-GLX
[ 42718.523] (II) Initializing extension NV-CONTROL
[ 42718.524] (II) Initializing extension XINERAMA
[ 42718.693] (II) config/udev: Adding input device System mouse (/dev/input/event0)
[ 42718.693] (**) System mouse: Applying InputClass "libinput pointer catchall"
[ 42718.693] (II) LoadModule: "libinput"
[ 42718.693] (II) Loading /usr/local/lib/xorg/modules/input/libinput_drv.so
[ 42718.696] (II) Module libinput: vendor="X.Org Foundation"
[ 42718.696] compiled for 1.20.8, module version = 0.30.0
[ 42718.696] Module class: X.Org XInput Driver
[ 42718.696] ABI class: X.Org XInput driver, version 24.1
[ 42718.696] (II) Using input driver 'libinput' for 'System mouse'
[ 42718.696] (**) System mouse: always reports core events
[ 42718.696] (**) Option "Device" "/dev/input/event0"
[ 42718.696] (**) Option "_source" "server/udev"
[ 42718.699] (II) event0 - System mouse: is tagged by udev as: Mouse
[ 42718.699] (II) event0 - System mouse: device is a pointer
[ 42718.700] (II) event0 - System mouse: device removed
[ 42718.700] (**) Option "config_info" "udev:/dev/input/event0"
[ 42718.700] (II) XINPUT: Adding extended input device "System mouse" (type: MOUSE, id 6)
[ 42718.700] (**) Option "AccelerationScheme" "none"
[ 42718.700] (**) System mouse: (accel) selected scheme none/0
[ 42718.700] (**) System mouse: (accel) acceleration factor: 2.000
[ 42718.700] (**) System mouse: (accel) acceleration threshold: 4
[ 42718.701] (II) event0 - System mouse: is tagged by udev as: Mouse
[ 42718.701] (II) event0 - System mouse: device is a pointer
[ 42718.702] (II) config/udev: Adding input device System keyboard multiplexer (/dev/input/event1)
[ 42718.702] (**) System keyboard multiplexer: Applying InputClass "Evdev keyboard"
[ 42718.702] (**) System keyboard multiplexer: Applying InputClass "libinput keyboard catchall"
[ 42718.702] (II) Using input driver 'libinput' for 'System keyboard multiplexer'
[ 42718.702] (**) System keyboard multiplexer: always reports core events
[ 42718.702] (**) Option "Device" "/dev/input/event1"
[ 42718.702] (**) Option "_source" "server/udev"
[ 42718.703] (II) event1 - System keyboard multiplexer: is tagged by udev as: Keyboard
[ 42718.703] (II) event1 - System keyboard multiplexer: device is a keyboard
[ 42718.703] (II) event1 - System keyboard multiplexer: device removed
[ 42718.703] (**) Option "config_info" "udev:/dev/input/event1"
[ 42718.704] (II) XINPUT: Adding extended input device "System keyboard multiplexer" (type: KEYBOARD, id 7)
[ 42718.704] (**) Option "xkb_rules" "evdev"
[ 42718.743] (II) event1 - System keyboard multiplexer: is tagged by udev as: Keyboard
[ 42718.743] (II) event1 - System keyboard multiplexer: device is a keyboard
[ 42718.744] (II) config/udev: Adding input device vendor 0x0557 product 0x2419 (/dev/input/event2)
[ 42718.744] (**) vendor 0x0557 product 0x2419: Applying InputClass "Evdev keyboard"
[ 42718.744] (**) vendor 0x0557 product 0x2419: Applying InputClass "libinput keyboard catchall"
[ 42718.744] (II) Using input driver 'libinput' for 'vendor 0x0557 product 0x2419'
[ 42718.744] (**) vendor 0x0557 product 0x2419: always reports core events
[ 42718.744] (**) Option "Device" "/dev/input/event2"
[ 42718.744] (**) Option "_source" "server/udev"
[ 42718.745] (II) event2 - vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2: is tagged by udev as: Keyboard
[ 42718.745] (II) event2 - vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2: device is a keyboard
[ 42718.746] (II) event2 - vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2: device removed
[ 42718.746] (**) Option "config_info" "udev:/dev/input/event2"
[ 42718.746] (II) XINPUT: Adding extended input device "vendor 0x0557 product 0x2419" (type: KEYBOARD, id 8)
[ 42718.746] (**) Option "xkb_rules" "evdev"
[ 42718.747] (II) event2 - vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2: is tagged by udev as: Keyboard
[ 42718.747] (II) event2 - vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2: device is a keyboard
[ 42718.748] (II) config/udev: Adding input device vendor 0x0557 product 0x2419 (/dev/input/event3)
[ 42718.748] (**) vendor 0x0557 product 0x2419: Applying InputClass "libinput pointer catchall"
[ 42718.748] (II) Using input driver 'libinput' for 'vendor 0x0557 product 0x2419'
[ 42718.748] (**) vendor 0x0557 product 0x2419: always reports core events
[ 42718.748] (**) Option "Device" "/dev/input/event3"
[ 42718.748] (**) Option "_source" "server/udev"
[ 42718.749] (II) event3 - vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2: is tagged by udev as: Mouse
[ 42718.749] (II) event3 - vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2: device is a pointer
[ 42718.750] (II) event3 - vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2: device removed
[ 42718.750] (**) Option "config_info" "udev:/dev/input/event3"
[ 42718.750] (II) XINPUT: Adding extended input device "vendor 0x0557 product 0x2419" (type: MOUSE, id 9)
[ 42718.750] (**) Option "AccelerationScheme" "none"
[ 42718.750] (**) vendor 0x0557 product 0x2419: (accel) selected scheme none/0
[ 42718.750] (**) vendor 0x0557 product 0x2419: (accel) acceleration factor: 2.000
[ 42718.750] (**) vendor 0x0557 product 0x2419: (accel) acceleration threshold: 4
[ 42718.751] (II) event3 - vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2: is tagged by udev as: Mouse
[ 42718.751] (II) event3 - vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2: device is a pointer
[ 42718.752] (II) config/udev: Adding input device SIGMACHIP USB Keyboard (/dev/input/event4)
[ 42718.752] (**) SIGMACHIP USB Keyboard: Applying InputClass "Evdev keyboard"
[ 42718.752] (**) SIGMACHIP USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 42718.752] (II) Using input driver 'libinput' for 'SIGMACHIP USB Keyboard'
[ 42718.752] (**) SIGMACHIP USB Keyboard: always reports core events
[ 42718.752] (**) Option "Device" "/dev/input/event4"
[ 42718.752] (**) Option "_source" "server/udev"
[ 42718.753] (II) event4 - SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.11, addr 30: is tagged by udev as: Keyboard
[ 42718.753] (II) event4 - SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.11, addr 30: device is a keyboard
[ 42718.753] (II) event4 - SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.11, addr 30: device removed
[ 42718.753] (**) Option "config_info" "udev:/dev/input/event4"
[ 42718.754] (II) XINPUT: Adding extended input device "SIGMACHIP USB Keyboard" (type: KEYBOARD, id 10)
[ 42718.754] (**) Option "xkb_rules" "evdev"
[ 42718.755] (II) event4 - SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.11, addr 30: is tagged by udev as: Keyboard
[ 42718.755] (II) event4 - SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.11, addr 30: device is a keyboard
[ 42718.755] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event5)
[ 42718.755] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 42718.755] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[ 42718.755] (**) Logitech USB Optical Mouse: always reports core events
[ 42718.755] (**) Option "Device" "/dev/input/event5"
[ 42718.756] (**) Option "_source" "server/udev"
[ 42718.757] (II) event5 - Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 31: is tagged by udev as: Mouse
[ 42718.757] (II) event5 - Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 31: device is a pointer
[ 42718.757] (II) event5 - Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 31: device removed
[ 42718.757] (**) Option "config_info" "udev:/dev/input/event5"
[ 42718.757] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 11)
[ 42718.757] (**) Option "AccelerationScheme" "none"
[ 42718.758] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[ 42718.758] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 42718.758] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 42718.759] (II) event5 - Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 31: is tagged by udev as: Mouse
[ 42718.759] (II) event5 - Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 31: device is a pointer
[ 42718.790] (--) NVIDIA(GPU-0): BenQ GC2870 (DFP-1): connected
[ 42718.790] (--) NVIDIA(GPU-0): BenQ GC2870 (DFP-1): Internal TMDS
[ 42718.790] (--) NVIDIA(GPU-0): BenQ GC2870 (DFP-1): 600.0 MHz maximum pixel clock
[ 42718.790] (--) NVIDIA(GPU-0):
[ 42718.820] (--) NVIDIA(GPU-0): BenQ GC2870 (DFP-1): connected
[ 42718.820] (--) NVIDIA(GPU-0): BenQ GC2870 (DFP-1): Internal TMDS
[ 42718.820] (--) NVIDIA(GPU-0): BenQ GC2870 (DFP-1): 600.0 MHz maximum pixel clock
[ 42718.820] (--) NVIDIA(GPU-0):
[ 42771.771] (--) NVIDIA(GPU-0): BenQ GC2870 (DFP-1): connected
[ 42771.771] (--) NVIDIA(GPU-0): BenQ GC2870 (DFP-1): Internal TMDS
[ 42771.771] (--) NVIDIA(GPU-0): BenQ GC2870 (DFP-1): 600.0 MHz maximum pixel clock
[ 42771.771] (--) NVIDIA(GPU-0):
[ 42771.802] (--) NVIDIA(GPU-0): BenQ GC2870 (DFP-1): connected
[ 42771.803] (--) NVIDIA(GPU-0): BenQ GC2870 (DFP-1): Internal TMDS
[ 42771.803] (--) NVIDIA(GPU-0): BenQ GC2870 (DFP-1): 600.0 MHz maximum pixel clock
[ 42771.803] (--) NVIDIA(GPU-0):
[ 42773.486] (--) NVIDIA(GPU-0): BenQ GC2870 (DFP-1): connected
[ 42773.486] (--) NVIDIA(GPU-0): BenQ GC2870 (DFP-1): Internal TMDS
[ 42773.487] (--) NVIDIA(GPU-0): BenQ GC2870 (DFP-1): 600.0 MHz maximum pixel clock
[ 42773.487] (--) NVIDIA(GPU-0):
[ 42773.518] (--) NVIDIA(GPU-0): BenQ GC2870 (DFP-1): connected
[ 42773.518] (--) NVIDIA(GPU-0): BenQ GC2870 (DFP-1): Internal TMDS
[ 42773.518] (--) NVIDIA(GPU-0): BenQ GC2870 (DFP-1): 600.0 MHz maximum pixel clock
[ 42773.518] (--) NVIDIA(GPU-0):
> What are you expecting should happen?
After pull out usb, put into usb again, then both keyboard
and mouse work again.
> what does xinput say? libinput list-devices?
I can't work in X because of keyinput freezed, so work in
remote terminal:
root at smtp:~ # xinput
Unable to connect to X server
root at smtp:~ # libinput list-devices
Device: System mouse
Kernel: /dev/input/event0
Group: 1
Seat: seat0, default
Capabilities: pointer
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: disabled
Nat.scrolling: disabled
Middle emulation: disabled
Calibration: n/a
Scroll methods: button
Click methods: none
Disable-w-typing: n/a
Accel profiles: flat *adaptive
Rotation: n/a
Device: System keyboard multiplexer
Kernel: /dev/input/event1
Group: 2
Seat: seat0, default
Capabilities: keyboard
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Accel profiles: n/a
Rotation: n/a
Device: vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2
Kernel: /dev/input/event2
Group: 3
Seat: seat0, default
Capabilities: keyboard
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Accel profiles: n/a
Rotation: n/a
Device: vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2
Kernel: /dev/input/event3
Group: 4
Seat: seat0, default
Capabilities: pointer
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: disabled
Nat.scrolling: disabled
Middle emulation: disabled
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Accel profiles: n/a
Rotation: n/a
root at smtp:~ #
> Regards
> --
> Niclas
>
Regards
---
Kazuhiko Kiriyama <kiri at truefc.org>
More information about the freebsd-x11
mailing list