[Bug 240413] graphics/drm + x11-drivers/xf86-video-intel + Intel HD 5500 issues on 12.0
bugzilla-noreply at freebsd.org
bugzilla-noreply at freebsd.org
Mon Sep 9 08:50:01 UTC 2019
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=240413
--- Comment #7 from Tomasz "CeDeROM" CEDRO <tomek at cedro.info> ---
Thank you guys!
Silly problem as it turns out, sorry, my mistake! :-(
There is a /boot/kernel/i915kms.ko that shadows /boot/modules/i915kms.ko. The
default one /boot/kernel/i915kms.ko does not work with my card, but when I
explicitly load /boot/modules/i915.ko IT WORKS!!! THANK YOU!!! :-)
Some folks stated that this card is supported since 2018 so I considered it
will be supported out of the box in GENERIC / RELEASE, my mistake.
Yes I never run X as root, that was just for testing (in case my standard user
was missing some permissions).
By the way I heard about WAYLAND as replacement for XORG. I am using new
Enlightenment WM that also supports it. Is WAYLAND supported on FreeBSD and if
so where can I read about it? You are most experienced people with first hand
knowledge sorry for the question here in PR :-)
root at 0xCFMX4:~ # kldstat
Id Refs Address Size Name
1 69 0xffffffff80200000 243d228 kernel
2 1 0xffffffff8263e000 a6b78 linux.ko
3 2 0xffffffff826e5000 8df8 linux_common.ko
4 1 0xffffffff826ee000 27f48 geom_mirror.ko
5 1 0xffffffff82716000 3a9a10 zfs.ko
6 2 0xffffffff82ac0000 a4f0 opensolaris.ko
7 1 0xffffffff82acc000 c7e0 aesni.ko
8 1 0xffffffff82ad9000 16750 fuse.ko
9 1 0xffffffff82af0000 1ead0 geom_eli.ko
10 1 0xffffffff833fa000 120e0 drm.ko
11 1 0xffffffff8340d000 7f4a0 i915kms.ko
12 1 0xffffffff8348d000 45070 drm2.ko
13 4 0xffffffff834d3000 2020 iicbus.ko
14 1 0xffffffff834d6000 f98 iic.ko
15 1 0xffffffff834d7000 1570 iicbb.ko
16 1 0xffffffff834d9000 fb241 iwm7265Dfw.ko
17 1 0xffffffff835d5000 15630 if_iwm.ko
18 1 0xffffffff835eb000 1800 uhid.ko
19 1 0xffffffff835ed000 4d40 u3g.ko
20 1 0xffffffff835f2000 4390 ucom.ko
21 1 0xffffffff835f7000 25a68 ipfw.ko
root at 0xCFMX4:~ # kldunload i915kms
root at 0xCFMX4:~ # kldstat
Id Refs Address Size Name
1 49 0xffffffff80200000 243d228 kernel
2 1 0xffffffff8263e000 a6b78 linux.ko
3 2 0xffffffff826e5000 8df8 linux_common.ko
4 1 0xffffffff826ee000 27f48 geom_mirror.ko
5 1 0xffffffff82716000 3a9a10 zfs.ko
6 2 0xffffffff82ac0000 a4f0 opensolaris.ko
7 1 0xffffffff82acc000 c7e0 aesni.ko
8 1 0xffffffff82ad9000 16750 fuse.ko
9 1 0xffffffff82af0000 1ead0 geom_eli.ko
10 1 0xffffffff833fa000 120e0 drm.ko
16 1 0xffffffff834d9000 fb241 iwm7265Dfw.ko
17 1 0xffffffff835d5000 15630 if_iwm.ko
18 1 0xffffffff835eb000 1800 uhid.ko
19 1 0xffffffff835ed000 4d40 u3g.ko
20 1 0xffffffff835f2000 4390 ucom.ko
21 1 0xffffffff835f7000 25a68 ipfw.ko
root at 0xCFMX4:~ # kldunload drm
root at 0xCFMX4:~ # kldstat
Id Refs Address Size Name
1 45 0xffffffff80200000 243d228 kernel
2 1 0xffffffff8263e000 a6b78 linux.ko
3 2 0xffffffff826e5000 8df8 linux_common.ko
4 1 0xffffffff826ee000 27f48 geom_mirror.ko
5 1 0xffffffff82716000 3a9a10 zfs.ko
6 2 0xffffffff82ac0000 a4f0 opensolaris.ko
7 1 0xffffffff82acc000 c7e0 aesni.ko
8 1 0xffffffff82ad9000 16750 fuse.ko
9 1 0xffffffff82af0000 1ead0 geom_eli.ko
16 1 0xffffffff834d9000 fb241 iwm7265Dfw.ko
17 1 0xffffffff835d5000 15630 if_iwm.ko
18 1 0xffffffff835eb000 1800 uhid.ko
19 1 0xffffffff835ed000 4d40 u3g.ko
20 1 0xffffffff835f2000 4390 ucom.ko
21 1 0xffffffff835f7000 25a68 ipfw.ko
root at 0xCFMX4:~ # kldload /boot/modules/i915kms.ko
root at 0xCFMX4:~ # kldstat
Id Refs Address Size Name
1 65 0xffffffff80200000 243d228 kernel
2 1 0xffffffff8263e000 a6b78 linux.ko
3 2 0xffffffff826e5000 8df8 linux_common.ko
4 1 0xffffffff826ee000 27f48 geom_mirror.ko
5 1 0xffffffff82716000 3a9a10 zfs.ko
6 2 0xffffffff82ac0000 a4f0 opensolaris.ko
7 1 0xffffffff82acc000 c7e0 aesni.ko
8 1 0xffffffff82ad9000 16750 fuse.ko
9 1 0xffffffff82af0000 1ead0 geom_eli.ko
16 1 0xffffffff834d9000 fb241 iwm7265Dfw.ko
17 1 0xffffffff835d5000 15630 if_iwm.ko
18 1 0xffffffff835eb000 1800 uhid.ko
19 1 0xffffffff835ed000 4d40 u3g.ko
20 1 0xffffffff835f2000 4390 ucom.ko
21 1 0xffffffff835f7000 25a68 ipfw.ko
22 1 0xffffffff8361d000 12ce50 i915kms.ko
23 1 0xffffffff833fa000 76990 drm.ko
24 4 0xffffffff83471000 104f0 linuxkpi.ko
25 3 0xffffffff83482000 12f30 linuxkpi_gplv2.ko
26 2 0xffffffff83495000 6c0 debugfs.ko
0xCFMX4% startx
xauth: file /home/cd/.serverauth.40494 does not exist
X.Org X Server 1.18.4
Release Date: 2016-07-19
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 12.0-RELEASE-p10 amd64
Current Operating System: FreeBSD 0xCFMX4 12.0-RELEASE-p10 FreeBSD
12.0-RELEASE-p10 GENERIC amd64
Build Date: 22 August 2019 09:06:49AM
Current version of pixman: 0.34.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 9 10:34:00 2019
(==) Using default built-in configuration (39 lines)
scfb trace: probe start
scfb trace: probe done
E - PID=47271, valgrind=0
ESTART: 0.00000 [0.00000] - Begin Startup
ESTART: 0.00013 [0.00013] - Signal Trap
ESTART: 0.00016 [0.00003] - Signal Trap Done
ESTART: 0.00026 [0.00010] - Eina Init
ESTART: 0.00114 [0.00087] - Eina Init Done
ESTART: 0.00116 [0.00003] - Determine Prefix
ESTART: 0.00128 [0.00011] - Determine Prefix Done
ESTART: 0.00130 [0.00002] - Environment Variables
ESTART: 0.00135 [0.00005] - Environment Variables Done
ESTART: 0.00135 [0.00001] - Parse Arguments
ESTART: 0.00136 [0.00001] - Parse Arguments Done
ESTART: 0.00137 [0.00000] - Eet Init
ESTART: 0.00141 [0.00004] - Eet Init Done
ESTART: 0.00141 [0.00000] - Ecore Init
ESTART: 0.00668 [0.00527] - Ecore Init Done
ESTART: 0.00671 [0.00003] - EFX Init
ESTART: 0.00672 [0.00001] - EFX Init Done
ESTART: 0.00673 [0.00000] - EIO Init
ESTART: 0.03909 [0.03237] - EIO Init Done
ESTART: 0.03911 [0.00002] - Ecore Event Handlers
ESTART: 0.03911 [0.00000] - Ecore Event Handlers Done
ESTART: 0.03911 [0.00000] - Ecore_File Init
ESTART: 0.03912 [0.00001] - Ecore_File Init Done
ESTART: 0.03912 [0.00000] - Ecore_Con Init
ESTART: 0.03913 [0.00000] - Ecore_Con Init Done
ESTART: 0.03913 [0.00000] - Ecore_Ipc Init
ESTART: 0.03913 [0.00000] - Ecore_Ipc Init Done
ESTART: 0.03931 [0.00018] - Ecore_Evas Init
ESTART: 0.03965 [0.00034] - Ecore_Evas Init Done
ESTART: 0.03966 [0.00001] - Elementary Init
ESTART: 0.06450 [0.02485] - Elementary Init Done
ESTART: 0.06452 [0.00002] - Emotion Init
ESTART: 0.06473 [0.00021] - Emotion Init Done
ESTART: 0.06474 [0.00001] - Ecore_Evas Engine Check
ESTART: 0.06475 [0.00001] - Ecore_Evas Engine Check Done
ESTART: 0.06475 [0.00001] - E Intl Init
ESTART: 0.06479 [0.00003] - E Intl Init Done
ESTART: 0.06479 [0.00001] - E_Alert Init
ESTART: 0.06479 [0.00000] - E_Alert Init Done
ESTART: 0.06480 [0.00000] - E Directories Init
ESTART: 0.06494 [0.00014] - E Directories Init Done
ESTART: 0.06494 [0.00001] - E_Filereg Init
ESTART: 0.06495 [0.00000] - E_Filereg Init Done
ESTART: 0.06495 [0.00000] - E_Config Init
ESTART: 0.06789 [0.00294] - E_Config Init Done
ESTART: 0.06801 [0.00012] - E_Env Init
ESTART: 0.06808 [0.00007] - E_Env Init Done
ESTART: 0.06815 [0.00007] - E Paths Init
ESTART: 0.06826 [0.00011] - E Paths Init Done
ESTART: 0.06833 [0.00006] - E_Ipc Init
ESTART: 0.06940 [0.00107] - E_Ipc Init Done
ESTART: 0.06942 [0.00002] - E_Font Init
ESTART: 0.06942 [0.00000] - E_Font Init Done
ESTART: 0.06942 [0.00000] - E_Font Apply
ESTART: 0.06943 [0.00001] - E_Font Apply Done
ESTART: 0.06943 [0.00000] - E_Theme Init
ESTART: 0.06945 [0.00002] - E_Theme Init Done
ESTART: 0.06946 [0.00000] - E_Moveresize Init
ESTART: 0.06947 [0.00001] - E_Moveresize Init Done
ESTART: 0.06947 [0.00001] - E_Msgbus Init
ESTART: 0.07040 [0.00093] - E_Msgbus Init Done
ESTART: 0.07041 [0.00001] - Efreet Init
ESTART: 0.07042 [0.00001] - Efreet Init Done
ESTART: 0.07043 [0.00001] - E_Intl Post Init
ESTART: 0.07474 [0.00431] - E_Intl Post Init Done
ESTART: 0.07475 [0.00001] - E_Configure Init
ESTART: 0.07484 [0.00009] - E_Configure Init Done
ESTART: 0.07485 [0.00001] - E_Actions Init
ESTART: 0.07521 [0.00036] - E_Actions Init Done
ESTART: 0.07526 [0.00005] - E_Powersave Init
ESTART: 0.07526 [0.00001] - E_Powersave Init Done
ESTART: 0.07527 [0.00001] - Screens Init
ESTART: 0.07527 [0.00000] - screens: client
ESTART: 0.07528 [0.00001] - E_Screensaver Init
ESTART: 0.07529 [0.00001] - screens: client volume
ESTART: 0.07529 [0.00001] - screens: win
ESTART: 0.07530 [0.00001] - Compositor Init
RRR: ................. info get!
RRR: .... out eDP1
RRR: ...... lid_closed = 0 (1 && 0)
RRR: ...... connected 1
RRR: ...... modes 0x803383030
RRR: 'eDP1' 0 0 1920x1080
RRR: .... out HDMI1
RRR: ...... lid_closed = 0 (0 && 0)
RRR: ...... connected 1
RRR: ...... modes 0x802c52440
RRR: 'HDMI1' 1920 0 1920x1080
RRR: .... out DP1
RRR: ...... lid_closed = 0 (0 && 0)
RRR: ...... connected 0
RRR: ...... modes 0x0
RRR:-------------------------------- 2
RRR: 'eDP1': 0 0 1920x1080
RRR: 'HDMI1': 1920 0 1920x1080
RRR: result max: 3840x1080
RRR: loaded existing config
RRR: check lid for eDP1...
RRR: check lid for HDMI1...
RRR: check lid for eDP1...
RRR: check lid for HDMI1...
RRR: check lid for eDP1...
RRR: check lid for HDMI1...
--------------------------------------------------
RRR: out
id=eDP1/00ffffffffffff0028890214010101011e1a0104a51c10780216c5a4544b9b260f5054000000d1c001010101010101010101010101011a3680a070381f4030203500159c10000018112480a070381f4030203500159c10000018000000fc004c414d3132354d303037440a20000000ff004b3647303333333336320a202000be:
connected=1
RRR: check lid for eDP1...
RRR: out
id=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:
connected=1
RRR: check lid for HDMI1...
RRR: out id=DP1/: connected=0
--------------------------------------------------
RRR: re-get info before applying..
RRR: ................. info get!
RRR: .... out eDP1
RRR: ...... lid_closed = 0 (1 && 0)
RRR: ...... connected 1
RRR: ...... modes 0x803383e10
RRR: 'eDP1' 0 0 1920x1080
RRR: .... out HDMI1
RRR: ...... lid_closed = 0 (0 && 0)
RRR: ...... connected 1
RRR: ...... modes 0x802c524e0
RRR: 'HDMI1' 1920 0 1920x1080
RRR: .... out DP1
RRR: ...... lid_closed = 0 (0 && 0)
RRR: ...... connected 0
RRR: ...... modes 0x0
RRR:-------------------------------- 2
RRR: 'eDP1': 0 0 1920x1080
RRR: 'HDMI1': 1920 0 1920x1080
RRR: result max: 3840x1080
RRR: apply config...
RRR: apply 'eDP1'...
RRR: check lid for eDP1...
RRR: connected = 1
RRR: ... enabled
RRR: ... priority = 100
RRR: apply 'HDMI1'...
RRR: check lid for HDMI1...
RRR: connected = 1
RRR: ... enabled
RRR: ... priority = 1
RRR: apply 'DP1'...
RRR: check lid for DP1...
RRR: connected = 0
RRR: ... disabled
RRR: takeover config...
RRR: eval config...
RRR: screen do 'eDP1'
RRR: screen do 'eDP1'
RRR: screen do 'eDP1'
RRR: screen do 'eDP1'
RRR: screen do 'eDP1'
RRR: screen do 'eDP1'
RRR: screen do 'eDP1'
RRR: screen config loop!
RRR: screen do 'HDMI1'
RRR: screen do 'HDMI1'
RRR: screen do 'HDMI1'
RRR: screen do 'HDMI1'
RRR: screen do 'HDMI1'
RRR: screen do 'HDMI1'
RRR: screen do 'HDMI1'
RRR: screen config loop!
RRR: 'HDMI1' is relative to 'eDP1'
RRR: screen do 'eDP1'
RRR: screen config loop!
RRR: to above relative
RRR: 'HDMI1' is relative to 'eDP1'
RRR: screen do 'eDP1'
RRR: screen do 'eDP1'
RRR: screen config loop!
RRR: to above relative
RRR: 'HDMI1' is relative to 'eDP1'
RRR: screen do 'eDP1'
RRR: screen do 'eDP1'
RRR: screen do 'eDP1'
RRR: screen config loop!
RRR: to above relative
RRR: 'HDMI1' is relative to 'eDP1'
RRR: screen do 'eDP1'
RRR: screen do 'eDP1'
RRR: screen do 'eDP1'
RRR: screen do 'eDP1'
RRR: screen config loop!
RRR: to above relative
RRR: 'HDMI1' is relative to 'eDP1'
RRR: screen do 'eDP1'
RRR: screen do 'eDP1'
RRR: screen do 'eDP1'
RRR: screen do 'eDP1'
RRR: screen do 'eDP1'
RRR: screen config loop!
RRR: to above relative
RRR: 'HDMI1' is relative to 'eDP1'
RRR: screen do 'eDP1'
RRR: screen do 'eDP1'
RRR: screen do 'eDP1'
RRR: screen do 'eDP1'
RRR: screen do 'eDP1'
RRR: screen do 'eDP1'
RRR: screen config loop!
RRR: to above relative
RRR: screen do 'DP1'
RRR: screen do 'DP1'
RRR: screen do 'DP1'
RRR: screen do 'DP1'
RRR: screen do 'DP1'
RRR: screen do 'DP1'
RRR: screen do 'DP1'
RRR: screen config loop!
RRR:--------------------------------
RRR: s: 'eDP1' @ 0 0 - 1920x1080
RRR: s: 'HDMI1' @ 0 -1080 - 1920x1080
RRR:--- 0 -1080 -> 1920 1080
RRR: really apply config...
RRR: cur size: 3840x1080
RRR: size range: 320x200 -> 8192x8192
RRR: cur size: 3840x1080
RRR: set vsize: 1920x2160
RRR: find output for 'eDP1'
RRR: enabled: 1
RRR: crtc slot empty: 0
RRR: assign slot out: 42
RRR: find output for 'HDMI1'
RRR: enabled: 1
RRR: crtc slot empty: 1
RRR: assign slot out: 43
RRR: find output for 'DP1'
RRR: enabled: 0
RRR: modes for 'eDP1' are 0x803383e10 [9]
RRR: crtc on: 0 = 'eDP1' @ 0 1080 - 1920x1080 orient 1 mode 46 out 42
RRR: modes for 'HDMI1' are 0x802c52580 [40]
RRR: crtc on: 1 = 'HDMI1' @ 0 0 - 1920x1080 orient 1 mode 4f out 43
RRR: crtc off: 2
RRR: set vsize: 1920x2160
RRR: cur size: 3840x1080
RRR: done config...
xinerama screen 0 1080 1920x1080
xinerama screen 0 0 1920x1080
xinerama setup............... 2 0x0
ESTART: 0.38219 [0.30689] - E_Dnd Init
ESTART: 0.38230 [0.00011] - E_Dnd Init Done
ESTART: 0.38231 [0.00001] - Screens Init Done
ESTART: 0.38231 [0.00000] - E_Pointer Init
ESTART: 0.38232 [0.00001] - E_Pointer Init Done
ESTART: 0.38232 [0.00001] - E_Scale Init
ESTART: 0.38645 [0.00412] - E_Scale Init Done
ESTART: 0.38646 [0.00001] - E_Splash Init
ESTART: 0.38646 [0.00000] - E_Splash Init Done
ESTART: 0.40367 [0.01721] - Test File Format Support
ESTART: 0.41727 [0.01360] - Test File Format Support Done
ESTART: 0.41730 [0.00003] - E_Acpi Init
ESTART: 0.41733 [0.00003] - E_Acpi Init Done
ESTART: 0.41735 [0.00001] - E_Backlight Init
ERR<49097>:e src/bin/e_backlight.c:544 _bl_sys_find() ACPI brightness sysctl
'hw.acpi.video.lcd0.brightness' not found, consider 'kldload acpi_video'
## Copy & Paste the below (until EOF) into a terminal, then hit Enter
eina_btlog << EOF
EOF
ESTART: 0.41767 [0.00032] - E_Backlight Init Done
ESTART: 0.41768 [0.00001] - E_Dpms Init
ESTART: 0.41774 [0.00006] - E_Dpms Init Done
ESTART: 0.41775 [0.00001] - E_Desklock Init
ESTART: 0.41777 [0.00003] - E_Desklock Init Done
ESTART: 0.41778 [0.00001] - Efreet Paths
ESTART: 0.41779 [0.00001] - Efreet Paths Done
ESTART: 0.41780 [0.00001] - E_Sys Init
ESTART: 0.41833 [0.00053] - E_Sys Init Done
ESTART: 0.41834 [0.00002] - E_Exec Init
ESTART: 0.41835 [0.00000] - E_Exec Init Done
ESTART: 0.41835 [0.00000] - E_Comp Freeze
ESTART: 0.41835 [0.00001] - E_Comp Freeze Done
ESTART: 0.41836 [0.00001] - E_Fm2 Init
ESTART: 0.41851 [0.00015] - E_Fm2 Init Done
ESTART: 0.41852 [0.00001] - E_Msg Init
ESTART: 0.41852 [0.00000] - E_Msg Init Done
ESTART: 0.41853 [0.00001] - E_Grabinput Init
ESTART: 0.41854 [0.00000] - E_Grabinput Init Done
ESTART: 0.41854 [0.00001] - E_Module Init
ESTART: 0.41913 [0.00059] - E_Module Init Done
ESTART: 0.41915 [0.00003] - E_Remember Init
ESTART: 0.41928 [0.00012] - E_Remember Init Done
ESTART: 0.41929 [0.00002] - E_Gadget Init
ESTART: 0.42056 [0.00127] - E_Gadget Init Done
ESTART: 0.42058 [0.00002] - E_Gadcon Init
ESTART: 0.42059 [0.00000] - E_Gadcon Init Done
ESTART: 0.42059 [0.00001] - E_Toolbar Init
ESTART: 0.42060 [0.00001] - E_Toolbar Init Done
ESTART: 0.42061 [0.00001] - E_Bg Init
ESTART: 0.42062 [0.00001] - E_Bg Init Done
ESTART: 0.42063 [0.00001] - E_Mouse Init
ESTART: 0.42074 [0.00011] - E_Mouse Init Done
ESTART: 0.42075 [0.00001] - E_Bindings Init
ESTART: 0.42090 [0.00015] - E_Bindings Init Done
ESTART: 0.42091 [0.00001] - E_Thumb Init
ESTART: 0.42092 [0.00000] - E_Thumb Init Done
ESTART: 0.42092 [0.00000] - E_Icon Init
ESTART: 0.42092 [0.00000] - E_Icon Init Done
ESTART: 0.42092 [0.00000] - E_Update Init
ESTART: 0.42094 [0.00002] - E_Update Init Done
ESTART: 0.42094 [0.00001] - E_Deskenv Init
ESTART: 0.42098 [0.00003] - E_Deskenv Init Done
ESTART: 0.42098 [0.00001] - E_Order Init
ESTART: 0.42100 [0.00002] - E_Order Init Done
ESTART: 0.42100 [0.00000] - E_Comp_Canvas Keys Grab
ESTART: 0.42121 [0.00021] - E_Comp_Canvas Keys Grab Done
ESTART: 0.42122 [0.00001] - Load Modules
ESTART: 0.42122 [0.00000] - Load Modules Done
ESTART: 0.42122 [0.00000] - Run Startup Apps
ESTART: 0.42126 [0.00004] - Run Startup Apps Done
ESTART: 0.42127 [0.00000] - E_Comp Thaw
ESTART: 0.42128 [0.00001] - E_Comp Thaw Done
ESTART: 0.42128 [0.00000] - E_Test Init
ESTART: 0.42128 [0.00000] - E_Test Done
ESTART: 0.42129 [0.00001] - Bryce Init
ESTART: 0.42140 [0.00010] - Bryce Init Done
ESTART: 0.42141 [0.00001] - E_Shelf Init
ESTART: 0.42141 [0.00000] - E_Shelf Init Done
ESTART: 0.42143 [0.00002] - MAIN LOOP AT LAST
ESTART: 0.42720 [0.00577] - SLEEP
RRR: CB screen change...
RRR: CB screen change...
RRR: CB crtc change...
RRR: CB screen change...
RRR: CB output change...
RRR: CB screen change...
RRR: CB crtc change...
RRR: CB screen change...
W: [(null)] caps.c: Normally all extra capabilities would be dropped now, but
that's impossible because PulseAudio was built without capabilities support.
action halt 3
EINA ERROR: 'Invalid argument' on spin_destroy 0x8002be310
action reboot 3
EINA ERROR: 'Invalid argument' on spin_destroy 0x8002be310
action suspend 3
EINA ERROR: 'Invalid argument' on spin_destroy 0x8002be310
action hibernate 3
EINA ERROR: 'Invalid argument' on spin_destroy 0x8002be310
RRR: ... 1 0
RRR: reconfigure screens due to event...
RRR: ................. info get!
RRR: .... out eDP1
RRR: ...... lid_closed = 0 (1 && 0)
RRR: ...... connected 1
RRR: ...... modes 0x804eb5ae0
RRR: 'eDP1' 0 1080 1920x1080
RRR: .... out HDMI1
RRR: ...... lid_closed = 0 (0 && 0)
RRR: ...... connected 1
RRR: ...... modes 0x804e458c0
RRR: 'HDMI1' 0 0 1920x1080
RRR: .... out DP1
RRR: ...... lid_closed = 0 (0 && 0)
RRR: ...... connected 0
RRR: ...... modes 0x0
RRR: check fingerprint...
RRR: ... fingerprint says 0
RRR: changed = 0
--------------------------------------------------
RRR: out
id=eDP1/00ffffffffffff0028890214010101011e1a0104a51c10780216c5a4544b9b260f5054000000d1c001010101010101010101010101011a3680a070381f4030203500159c10000018112480a070381f4030203500159c10000018000000fc004c414d3132354d303037440a20000000ff004b3647303333333336320a202000be:
connected=1
RRR: check lid for eDP1...
RRR: out
id=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:
connected=1
RRR: check lid for HDMI1...
RRR: out id=DP1/: connected=0
--------------------------------------------------
RRR: change = 0
RRR: ................. info get!
RRR: .... out eDP1
RRR: ...... lid_closed = 0 (1 && 0)
RRR: ...... connected 1
RRR: ...... modes 0x804eb5ae0
RRR: 'eDP1' 0 1080 1920x1080
RRR: .... out HDMI1
RRR: ...... lid_closed = 0 (0 && 0)
RRR: ...... connected 1
RRR: ...... modes 0x802c523a0
RRR: 'HDMI1' 0 0 1920x1080
RRR: .... out DP1
RRR: ...... lid_closed = 0 (0 && 0)
RRR: ...... connected 0
RRR: ...... modes 0x0
RRR:-------------------------------- 2
RRR: 'eDP1': 0 1080 1920x1080
RRR: 'HDMI1': 0 0 1920x1080
RRR: result max: 1920x2160
xinerama screen 0 1080 1920x1080
xinerama screen 0 0 1920x1080
xinerama setup............... 2 0x803214370
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@ match screens 0x8037a9bf0[1] = 0 0 1920x1080 -- 1
@ matches existing zone 0x8025c08c0
move resize 0 0 1920x1080 -> 0 0 1920x1080
@ match screens 0x804eb5ae0[0] = 0 1080 1920x1080 -- 0
@ matches existing zone 0x8025c4b40
move resize 0 1080 1920x1080 -> 0 1080 1920x1080
(II) AIGLX: Suspending AIGLX clients for VT switch
^Cxinit: connection to X server lost
waiting for X server to shut down E: Begin Shutdown Procedure!
(II) Server terminated successfully (0). Closing log file.
t at 0xCFMX4:~ # find /boot/ -name "*i915*"
/boot/modules/i915_skl_guc_ver6_1_bin.ko
/boot/modules/i915_glk_dmc_ver1_04_bin.ko
/boot/modules/i915_cnl_dmc_ver1_06_bin.ko
/boot/modules/i915_skl_dmc_ver1_26_bin.ko
/boot/modules/i915_kbl_dmc_ver1_04_bin.ko
/boot/modules/i915_bxt_huc_ver01_07_bin.ko
/boot/modules/i915_bxt_dmc_ver1_07_bin.ko
/boot/modules/i915kms.ko
/boot/modules/i915_skl_dmc_ver1_27_bin.ko
/boot/modules/i915_bxt_guc_ver8_7_bin.ko
/boot/modules/i915_kbl_huc_ver02_00_bin.ko
/boot/modules/i915_skl_huc_ver01_07_bin.ko
/boot/modules/i915_kbl_guc_ver9_14_bin.ko
/boot/modules/i915_kbl_dmc_ver1_01_bin.ko
/boot/kernel.old/i915kms.ko
/boot/kernel/i915kms.ko
/boot/kernel.12.release/i915kms.ko
root at 0xCFMX4:~ # cat /etc/rc.conf|grep i915
kld_list="drm.ko i915kms.ko iwm7265Dfw.ko if_iwm.ko"
Clearly I was loading just i915kms.ko from /boot/kernel/i915kms.ko not the
/boot/modules/i915kms.ko which I should use :-(
--
You are receiving this mail because:
You are the assignee for the bug.
More information about the freebsd-x11
mailing list