[Bug 239065] devel/libpciaccess 0.14 breaks x11-drivers/xf86-video-vesa-2.4.0_2

[bugzilla-noreply at freebsd.org]

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=239065

--- Comment #10 from daniel <ars.na6mg at gmail.com> ---
In addition to what I've already provided, here's more.  Will provide more if
requested.

motherboard is: Gigabyte A320M-SH2 rev 1.1, Bios/efi is at level F22

dmesg...

---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-RELEASE-p7 GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM
6.0.1)
VT(efifb): resolution 1024x768
CPU: AMD Ryzen 3 2200G with Radeon Vega Graphics     (3493.55-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x810f10  Family=0x17  Model=0x11  Stepping=0
 
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
 
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD
Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX>
  Structured Extended
Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr>
  SVM: (disabled in BIOS) NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 15532036096 (14812 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length
but zero Address: 0x0000000000000000/0x1 (20181003/tbfadt-796)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
Launching APs: 2 3 1
Timecounter "TSC-low" frequency 1746776412 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810f9a00, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I > on motherboard
Firmware Error (ACPI): Failure creating [\134_SB.SMIC], AE_ALREADY_EXISTS
(20181003/dswload2-468)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog
(20181003/psobject-372)
Firmware Error (ACPI): Failure creating [\134_SB.SMIB], AE_ALREADY_EXISTS
(20181003/dsfield-803)
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 450
Event timer "HPET2" frequency 14318180 Hz quality 450
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe8a0000-0xfe8a7fff irq 28 at
device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AHCI SATA controller> mem 0xfe880000-0xfe89ffff irq 29 at device 0.1 on
pci1
ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 28 at device 4.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 29 at device 5.0 on pci2
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 30 at device 6.0 on pci2
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 31 at device 7.0 on pci2
pci6: <ACPI PCI bus> on pcib6
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port
0xf000-0xf0ff mem 0xfe700000-0xfe700fff,0xf0300000-0xf0303fff irq 31 at device
0.0 on pci6
re0: Using 1 MSI-X message
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master,
1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: e0:d5:5e:d8:db:94
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib7: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci7: <ACPI PCI bus> on pcib7
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem
0xe0000000-0xefffffff,0xf0000000-0xf01fffff,0xfe600000-0xfe67ffff irq 52 at
device 0.0 on pci7
vgapci0: Boot video device
hdac0: <ATI (0x15de) HDA Controller> mem 0xfe688000-0xfe68bfff irq 53 at device
0.1 on pci7
pci7: <encrypt/decrypt> at device 0.2 (no driver attached)
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfe400000-0xfe4fffff irq 55 at
device 0.3 on pci7
xhci1: 64 bytes context size, 64-bit DMA
xhci1: Unable to map MSI-X table 
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfe300000-0xfe3fffff irq 52 at
device 0.4 on pci7
xhci2: 64 bytes context size, 64-bit DMA
xhci2: Unable to map MSI-X table 
usbus2 on xhci2
usbus2: 5.0Gbps Super Speed USB v3.0
hdac1: <AMD (0x15e3) HDA Controller> mem 0xfe680000-0xfe687fff irq 54 at device
0.6 on pci7
pcib8: <ACPI PCI-PCI bridge> at device 8.2 on pci0
pci8: <ACPI PCI bus> on pcib8
ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfe900000-0xfe9007ff irq 54 at
device 0.0 on pci8
ahci1: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported with FBS
ahcich8: <AHCI channel> at channel 0 on ahci1
ahcich9: <AHCI channel> at channel 1 on ahci1
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
uart2: <16x50 with 256 byte FIFO> iomem
0xfedc9000-0xfedc9fff,0xfedc7000-0xfedc7fff irq 3 on acpi0
uart3: <16x50 with 256 byte FIFO> iomem
0xfedca000-0xfedcafff,0xfedc8000-0xfedc8fff irq 4 on acpi0
uart4: <16x50 with 256 byte FIFO> iomem
0xfedce000-0xfedcefff,0xfedcc000-0xfedccfff irq 15 on acpi0
uart5: <16x50 with 256 byte FIFO> iomem
0xfedcf000-0xfedcffff,0xfedcd000-0xfedcdfff irq 5 on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0
pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0
pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0
pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0
hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1
pcm6: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1
pcm7: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1
pcm8: <Realtek ALC887 (Onboard Digital)> at nid 17 on hdaa1
ugen2.1: <0x1022 XHCI root HUB> at usbus2
ugen0.1: <0x1022 XHCI root HUB> at usbus0
ugen1.1: <0x1022 XHCI root HUB> at usbus1
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD1003FZEX-00K3CA0 01.01A01> ACS-3 ATA SATA 3.x device
ada0: Serial Number WD-WCC6Y7PUZFDC
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <TOSHIBA HDWD105 MS1OA8R0> ATA8-ACS SATA 3.x device
ada1: Serial Number 48UK5JAAS
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 476940MB (976773168 512 byte sectors)
ada2 at ahcich4 bus 0 scbus2 target 0 lun 0
ada2: <WDC WD5000LPCX-22VHAT1 02.01A02> ACS-3 ATA SATA 3.x device
ada2: Serial Number WD-WXP1A48KZ5JA
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 476940MB (976773168 512 byte sectors)
ada2: quirks=0x1<4K>
Trying to mount root from ufs:/dev/ada1p3 [rw]...
uhub0: 2 ports with 2 removable, self powered
uhub1: 8 ports with 8 removable, self powered
uhub2: 22 ports with 22 removable, self powered
ugen0.2: <vendor 0x13fe Patriot Memory> at usbus0
umass0 on uhub2
umass0: <vendor 0x13fe Patriot Memory, class 0/0, rev 2.00/1.00, addr 1> on
usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x8100
umass0:6:0: Attached to scbus6
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: < Patriot Memory PMAP> Removable Direct Access SPC-2 SCSI device
da0: Serial Number 0703952B0E3BC581
da0: 40.000MB/s transfers
da0: 14820MB (30351360 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
[drm] amdgpu kernel modesetting enabled.
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1458:0xD000 0xC8).
[drm] register mmio base: 0xFE600000
[drm] register mmio size: 524288
[drm] PCI I/O BAR is not found.
ugen0.3: <USB Device USB 2.0 Hub> at usbus0
uhub3 on uhub2
uhub3: <USB Device USB 2.0 Hub, class 9/0, rev 2.00/0.00, addr 2> on usbus0
drmn0: successfully loaded firmware image with name: amdgpu/raven_gpu_info.bin
[drm] probing gen 2 caps for device 1022:15db = 700d03/e
[drm] probing mlw for device 1002:15dd = 400d03
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
[drm] BIOS signature incorrect 0 0
ATOM BIOS: 113-RAVEN-104
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is
9-bit
drmn0: VRAM: 1024M 0x000000F400000000 - 0x000000F43FFFFFFF (1024M used)
drmn0: GTT: 1024M 0x000000F500000000 - 0x000000F53FFFFFFF
Successfully added WC MTRR for [0xe0000000-0xefffffff]: 0; 
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits UNKNOWN
[TTM] Zone  kernel: Available graphics memory: 7816322 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[drm] amdgpu: 1024M of VRAM memory ready
[drm] amdgpu: 3072M of GTT memory ready.
i_size_write unimplemented
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F400800000).
uhub3: 4 ports with 4 removable, self powered
drmn0: successfully loaded firmware image with name: amdgpu/raven_asd.bin
drmn0: successfully loaded firmware image with name: amdgpu/raven_pfp.bin
ugen0.4: <vendor 0x1017 Gaming Keyboard> at usbus0
ukbd0 on uhub3
ukbd0: <vendor 0x1017 Gaming Keyboard, class 0/0, rev 2.00/1.04, addr 3> on
usbus0
kbd2 at ukbd0
drmn0: successfully loaded firmware image with name: amdgpu/raven_me.bin
ugen0.5: <Logitech USB Receiver> at usbus0
ukbd1 on uhub3
ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 4> on usbus0
drmn0: successfully loaded firmware image with name: amdgpu/raven_ce.bin
kbd3 at ukbd1
drmn0: successfully loaded firmware image with name: amdgpu/raven_rlc.bin
drmn0: successfully loaded firmware image with name: amdgpu/raven_mec.bin
drmn0: successfully loaded firmware image with name: amdgpu/raven_mec2.bin
i_size_write unimplemented
i_size_write unimplemented
i_size_write unimplemented
i_size_write unimplemented
i_size_write unimplemented
i_size_write unimplemented
i_size_write unimplemented
i_size_write unimplemented
i_size_write unimplemented
i_size_write unimplemented
drmn0: successfully loaded firmware image with name: amdgpu/raven_sdma.bin
[drm] use_doorbell being set to: [true]
i_size_write unimplemented
drmn0: successfully loaded firmware image with name: amdgpu/raven_vcn.bin
[drm] Found VCN firmware Version: 1.73 Family ID: 18
i_size_write unimplemented
i_size_write unimplemented
i_size_write unimplemented
[drm:construct] construct: Invalid Connector ObjectID from Adapter Service for
connector index:2! type 0 expected 3
[drm] Display Core initialized with v3.1.27!
[drm] Connector HDMI-A-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.HDMI-A-1
[drm]   - kern.vt.fb.default_mode
[drm] SADs count is: 0, don't need to read it
[drm] Connector DVI-D-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.DVI-D-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector DP-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.DP-1
[drm]   - kern.vt.fb.default_mode
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] VCN decode and encode initialized successfully.
[drm] fb mappable at 0xE1000000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm]    pitch is 7680
VT: Replacing driver "efifb" with new "fb".
start FB_INFO:
type=11 height=1080 width=1920 depth=32
cmsize=16 size=8294400
pbase=0xe1000000 vbase=0xfffff800e1000000
name=drmn0 flags=0x0 stride=7680 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: amdgpudrmfb frame buffer device
i_size_write unimplemented
drmn0: ring 0(gfx) uses VM inv eng 4 on hub 0
drmn0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0
drmn0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0
drmn0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0
drmn0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0
drmn0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0
drmn0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0
drmn0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0
drmn0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0
drmn0: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0
drmn0: ring 10(sdma0) uses VM inv eng 4 on hub 1
drmn0: ring 11(vcn_dec) uses VM inv eng 5 on hub 1
drmn0: ring 12(vcn_enc0) uses VM inv eng 6 on hub 1
drmn0: ring 13(vcn_enc1) uses VM inv eng 7 on hub 1
[drm] Initialized amdgpu 3.23.0 20150101 for drmn0 on minor 0
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
uhid0 on uhub3
uhid0: <vendor 0x1017 Gaming Keyboard, class 0/0, rev 2.00/1.04, addr 3> on
usbus0
ums0 on uhub3
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 4> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid1 on uhub3
uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 4> on usbus0
pflog0: promiscuous mode enabled
Security policy loaded: MAC/ntpd (mac_ntpd)
[drm:generic_reg_wait] REG_WAIT timeout 1us * 10 tries - optc1_lock line:553
WARNING !(0) failed at
/usr/ports/graphics/drm-fbsd12.0-kmod/work/kms-drm-d989a80/drivers/gpu/drm/amd/display/dc/dc_helper.c:197
[drm:generic_reg_wait] REG_WAIT timeout 1us * 10 tries - optc1_lock line:553
WARNING !(0) failed at
/usr/ports/graphics/drm-fbsd12.0-kmod/work/kms-drm-d989a80/drivers/gpu/drm/amd/display/dc/dc_helper.c:197


/etc/rc.conf.....

ifconfig_re0="DHCP"
ifconfig_re0_ipv6="inet6 accept_rtadv"
sshd_enable="YES"
moused_enable="YES"
ntpd_enable="YES"
ntpd_sync_on_start="YES"
# Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable
dumpdev="AUTO"
kld_list="/boot/modules/amdgpu.ko"
dbus_enable="YES"
postgresql_enable="YES"
linux_enable="YES"
#autofs_enable="YES"
pf_enable="YES"
pf_rules="/etc/pf.conf"
pf_flags=""
pflog_enable="YES"
pflog_logfile="/var/log/pflog"
pflog_flags=""

-- 
You are receiving this mail because:
You are the assignee for the bug.