12.0-RC1 drm_atomic panic (supervisor read data, protection violation)

matias at pizarro.net matias at pizarro.net
Mon Nov 19 19:10:51 UTC 2018


I forgot to mention that though I currently have linux-c6 rolled out I 
tried all the combinations of quarterly/latest, 
drm-stable-kmod/drm-next-kmod, BETA4/RC1 with linux-c7 and got the same 
panic. I do not at all understand what is at hand but I have a gut 
feeling the fact this is happening with linux binaries is relevant. The 
good thing is I can, alas, reproduce the issue at will.

all the best,

-- matías

On 19/11/2018 18:58, matias at pizarro.net wrote:
> Sorry for the spam, I had forgotten this:
> 
> Fatal trap 12: page fault while in kernel mode
> cpuid = 0; apic id = 00
> fault virtual address   = 0x830c0db10
> fault code      = supervisor read data, protection violation
> instruction pointer = 0x20:0xffffffff83e89ad1
> stack pointer           = 0x28:0xfffffe00ea0a9740
> frame pointer           = 0x28:0xfffffe00ea0a9880
> code segment        = base 0x0, limit 0xfffff, type 0x1b
>             = DPL 0, pres 1, long 1, def32 0, gran 1
> processor eflags    = interrupt enabled, resume, IOPL = 0
> current process     = 55043 (sublime_text)
> trap number     = 12
> WARNING !state->acquire_ctx failed at drm_atomic.c:676
> WARNING !state->acquire_ctx failed at drm_atomic.c:263
> WARNING !state->acquire_ctx failed at drm_atomic.c:676
> WARNING !state->acquire_ctx failed at drm_atomic.c:676
> WARNING !state->acquire_ctx failed at drm_atomic.c:263
> WARNING !state->acquire_ctx failed at drm_atomic.c:263
> WARNING !state->acquire_ctx failed at drm_atomic.c:676
> WARNING !state->acquire_ctx failed at drm_atomic.c:676
> WARNING !state->acquire_ctx failed at drm_atomic.c:676
> WARNING !state->acquire_ctx failed at drm_atomic.c:676
> WARNING !state->acquire_ctx failed at drm_atomic.c:676
> WARNING !state->acquire_ctx failed at drm_atomic.c:676
> WARNING !state->acquire_ctx failed at drm_atomic.c:263
> WARNING !state->acquire_ctx failed at drm_atomic.c:676
> WARNING !state->acquire_ctx failed at drm_atomic.c:263
> WARNING !state->acquire_ctx failed at drm_atomic.c:263
> WARNING !state->acquire_ctx failed at drm_atomic.c:999
> WARNING !state->acquire_ctx failed at drm_atomic.c:263
> WARNING !state->acquire_ctx failed at drm_atomic.c:999
> WARNING !state->acquire_ctx failed at drm_atomic.c:263
> WARNING !state->acquire_ctx failed at drm_atomic.c:263
> WARNING !state->acquire_ctx failed at drm_atomic.c:676
> WARNING !state->acquire_ctx failed at drm_atomic.c:263
> WARNING !state->acquire_ctx failed at drm_atomic.c:676
> WARNING !state->acquire_ctx failed at drm_atomic.c:263
> WARNING !state->acquire_ctx failed at drm_atomic.c:263
> WARNING !state->acquire_ctx failed at drm_atomic.c:263
> <4>WARN_ON(!mutex_is_locked(&dev->struct_mutex))WARN_ON(!mutex_is_locked(&fbc->lock))pipe
> A vblank wait timed out
> <4>WARN_ON(!mutex_is_locked(&fbc->lock))WARN_ON(!mutex_is_locked(&fbc->lock))WARN_ON(!mutex_is_locked(&fbc->lock))
>  panic: page fault
> 
> 
> 
> On 19/11/2018 18:43, matias at pizarro.net wrote:
>> Sorry, I forgot to mention I am using the on-board UHD Graphics 620
>> 
>> On 19/11/2018 18:37, matias at pizarro.net wrote:
>>> Hello everyone,
>>> 
>>> Thanks for your great work that allows me to use a real OS on my work 
>>> machine.
>>> 
>>> I have been tracking 12-CURRENT on a ThinkPad T450 without issues
>>> until now. I just got myself a T480 and rolled out 12.0-BETA4 and 
>>> then
>>> RC1, with the same packages but I am getting a panic when launching
>>> either Sublime Text 3 or Textadept. All my other packages (mpv,
>>> libreoffice, Inkscape, Firefox, Chromium, Xfe etc...) are working 
>>> fine
>>> but these two, which are linux binaries (relevant?), trigger the
>>> panic, both in BETA4 and RC1, using drm-stable-kmod or drm-next-kmod,
>>> from quarterly or latest pkg repos.
>>> At the moment I have
>>> $ pkg info -d drm-next-kmod
>>> drm-next-kmod-4.11.g20181027_1:
>>>         gpu-firmware-kmod-g20181104
>>> 
>>> Bearing in mind these are running on different hardware:
>>>     - works, self-compiled kernel:
>>>         FreeBSD lenovo01 12.0-CURRENT FreeBSD 12.0-CURRENT #0 r334644 
>>> amd64
>>>     - panics, fresh install from BETA4 image, binary-updated to RC1:
>>>         FreeBSD lenovo01 12.0-RC1 FreeBSD 12.0-RC1 r340470 GENERIC  
>>> amd64
>>> 
>>> After 12 hours of trying to sort this out I have run out of ideas. I
>>> would appreciate it if you could help me figure out what should my
>>> next steps be.
>>> I could, for instance:
>>>     1) Roll-out 12.0-RC1 on a BE on the machine that works to see if
>>> the issue is linked with the change of hardware
>>>     2) Roll-out 12-CURRENT r334644 on a BE on the panicking machine 
>>> to
>>> see if the issue is linked to the change of kernel
>>>     3) Compile a DEBUG kernel on the panicking machine to help you
>>> diagnose the issue
>>>     4) Roll out a patched kernel if the included information inspires
>>> you an idea for a patch
>>> 
>>> I have no idea of C or kernel hacking but I am confortable with
>>> compiling custom kernels or building ports.
>>> 
>>> I have put the following in a gist, though I include here an extract
>>> of part of the dump report to (hopefully) whet your appetite:
>>>     - /var/crash/core.txt, that contains full boot log, ps -axlww,
>>> vmstat -s | -m | -z
>>>     - /boot/loader.conf
>>>     - /etc/rc.conf
>>>     - /etc/sysctl.conf
>>>     - /var/log/Xorg.0.log (I am not using any Xorg configuration)
>>> 
>>> gist URL: 
>>> https://gist.github.com/rebost/1a2bbfc45e9273ae5a76a98c3a67a23d
>>> 
>>> I also have the actual vmcore dump at hand if necessary, but that's 
>>> 1,4GB.
>>> 
>>> If there is anything else I can help you help me with, just let me 
>>> know
>>> 
>>> Thanks for your help, past and future.
>>> 
>>> -- matías
>>> _______________________________________________
>>> freebsd-x11 at freebsd.org mailing list
>>> https://lists.freebsd.org/mailman/listinfo/freebsd-x11
>>> To unsubscribe, send any mail to 
>>> "freebsd-x11-unsubscribe at freebsd.org"
>> _______________________________________________
>> freebsd-x11 at freebsd.org mailing list
>> https://lists.freebsd.org/mailman/listinfo/freebsd-x11
>> To unsubscribe, send any mail to "freebsd-x11-unsubscribe at freebsd.org"
> _______________________________________________
> freebsd-x11 at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe at freebsd.org"


More information about the freebsd-x11 mailing list