Intel HD Graphics 400 (Ver. 2.19.15.4444) failed

Tue Jan 23 07:09:10 UTC 2018

At Mon, 22 Jan 2018 20:48:59 -0800,
Pete Wright wrote:
> 
> 
> 
> On 01/22/2018 18:25, KIRIYAMA Kazuhiko wrote:
> > Hi all,
> >
> > I've installed FreeBSD 12.0-CURRENT(r328126) to my note PC
> > (SG116j[1]) and then installed
> > xf86-video-intel-2.99.917.20170228_1
> > (x11-drivers/xf86-video-intel):
> >
> > root at t:~ # uname -v
> > FreeBSD 12.0-CURRENT #0 r328126: Thu Jan 18 15:25:44 UTC 2018     root at releng3.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC
> > root at t:~ # pkg info -aI|grep intel
> > xf86-video-intel-2.99.917.20170228_1 Driver for Intel integrated graphics chipsets
> >
> > And test to run X as follows:
> >
> > root at t:~ # X -configure
> >
> > X.Org X Server 1.18.4
> > Release Date: 2016-07-19
> > X Protocol Version 11, Revision 0
> > Build Operating System: FreeBSD 12.0-CURRENT amd64
> > Current Operating System: FreeBSD t.pis 12.0-CURRENT FreeBSD 12.0-CURRENT #0 r328126: Thu Jan 18 15:25:44 UTC 2018     root at releng3.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
> > Build Date: 05 January 2018  04:01:52AM
> >   
> > Current version of pixman: 0.34.0
> >          Before reporting problems, check http://wiki.x.org
> >          to make sure that you have the latest version.
> > Markers: (--) probed, (**) from config file, (==) default setting,
> >          (++) from command line, (!!) notice, (II) informational,
> >          (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> > (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 23 10:58:05 2018
> > List of video drivers:
> >          scfb
> >          vesa
> >          modesetting
> >          intel
> > scfb trace: probe start
> > (++) Using config file: "/root/xorg.conf.new"
> >
> >
> > Xorg detected your mouse at device /dev/sysmouse.
> > Please check your config if the mouse is still not
> > operational, as by default Xorg tries to autodetect
> > the protocol.
> >
> > Your xorg.conf file is /root/xorg.conf.new
> >
> > To test the server, run 'X -config /root/xorg.conf.new'
> >
> > (EE) Server terminated with error (2). Closing log file.
> >
> > root at t:~ # X -config xorg.conf.new
> >
> > X.Org X Server 1.18.4
> > Release Date: 2016-07-19
> > X Protocol Version 11, Revision 0
> > Build Operating System: FreeBSD 12.0-CURRENT amd64
> > Current Operating System: FreeBSD t.pis 12.0-CURRENT FreeBSD 12.0-CURRENT #0 r328126: Thu Jan 18 15:25:44 UTC 2018     root at releng3.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
> > Build Date: 05 January 2018  04:01:52AM
> >   
> > Current version of pixman: 0.34.0
> >          Before reporting problems, check http://wiki.x.org
> >          to make sure that you have the latest version.
> > Markers: (--) probed, (**) from config file, (==) default setting,
> >          (++) from command line, (!!) notice, (II) informational,
> >          (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> > (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 23 11:10:17 2018
> > (++) Using config file: "xorg.conf.new"
> > (EE)
> > Fatal server error:
> > (EE) no screens found(EE)
> > (EE)
> > Please consult the The X.Org Foundation support
> >           at http://wiki.x.org
> >   for help.
> > (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
> > (EE)
> > (EE) Server terminated with error (1). Closing log file.
> > root at t:~ #
> >
> > Xorg.0.log was up to [2]. Does Intel HD Graphics 400 still
> > not support yet?
> 
> I have similar hardware that is supported on current via the 
> "drm-next-kmod" port/pkg:
> https://www.freshports.org/graphics/drm-next-kmod/
> 
> be sure to follow the instructions in the pkg-message to get things 
> working, it should load the bits required (as a kernel module) to allow 
> you to use either the xf86-video-intel ddx that you've already installed 
> or the modesetting Xorg driver (which is getting more attention upstream 
> by the Xorg team).  the modesetting driver comes bundled with the 
> xorg-server port/pkg, so no need to install any additional software to 
> use that graphics driver.
> 
> invoking xorg or startx without any existing xorg.conf in place should 
> autodetect pretty much everything automagically as well. having said 

I've installed drm-next-kmod-g20171006_1
(graphics/drm-next-kmod) and "rm /etc/X11/xorg.conf" then
"startx", very fine graphics displayed! The rezolution is 
a full HD 1920x1080. Great!!!

root at t:~ # xwininfo 

xwininfo: Please select the window about which you
          would like information by clicking the
          mouse in that window.

xwininfo: Window id: 0xcd (the root window) (has no name)

  Absolute upper-left X:  0
  Absolute upper-left Y:  0
  Relative upper-left X:  0
  Relative upper-left Y:  0
  Width: 1920
  Height: 1080
  Depth: 24
  Visual: 0x21
  Visual Class: TrueColor
  Border width: 0
  Class: InputOutput
  Colormap: 0x20 (installed)
  Bit Gravity State: ForgetGravity
  Window Gravity State: NorthWestGravity
  Backing Store State: NotUseful
  Save Under State: no
  Map State: IsViewable
  Override Redirect State: no
  Corners:  +0+0  -0+0  -0-0  +0-0
  -geometry 1920x1080+0+0

root at t:~ # 

> that - you can still use an xorg.conf to set things up to suit your 
> local config.

I don't know about local config. Does "local config" means merely
localtion of xorg.conf? 
At any rate, set it at /etc/X11/xorg.conf, then X does not work ;-(

> 
> hope this helps!
> -pete

Thanx Pete!!!

> 
> -- 
> Pete Wright
> pete at nomadlogic.org
> @nomadlogicLA
> 

---
KIRIYAMA Kazuhiko