Testing the new i915 driver (rev. 3820047)

Ruediger Gad r.c.g at gmx.de
Sat Oct 17 19:21:04 UTC 2015 

Hi,

thank you very much for your work on this.

I tried the latest version as of today (commit
382004782ca4960f1e25a890e8df21507ba9eb4f).
Unfortunately, it does not seem to work as I only get a black screen on
the console.

I tried with both kern.vty="vt" and kern.vty="sc".
Attached, I send the corresponding dmesg output for vt (dmesg.out) and
sc (dmesg.out.sc).
My system is a laptop with an i7-4710MQ CPU and a 2560x1440 display.
I hope the dmesg out is helpful.

Again, thank you very very much for working on this.



BR,

Ruediger




On 17.10.2015 15:26, Jean-Sébastien Pédron wrote:
> Hi!
> 
> Lately, I fixed several issues with the GEM, people already reported
> this improved things for them.
> 
> I believe I fixed two problems with the output connectors too and I hope
> that it will be fine now for people who reported eg. non-working HDMI.
> However, I can't test this myself.
> 
> I'm still chasing a problem with Mesa (Stellarium hangs on startup for me).
> 
> As a reminder, informations are available on the wiki:
> https://wiki.freebsd.org/Graphics/Update%20i915%20GPU%20driver%20to%20Linux%203.8
> 
> Please continue to test! Thank you for your help :)
> 


-- 
http://ruedigergad.com
-------------- next part --------------
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #2 3820047(drm-i915-update-38): Sat Oct 17 18:27:16 CEST 2015
    root at colin:/usr/obj/usr/home/rc/freebsd_source/freebsd-base-graphics/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
WARNING: WITNESS option enabled, expect reduced performance.
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-4710MQ CPU @ 2.50GHz (2494.28-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 17983078400 (17150 MB)
avail memory = 16489172992 (15725 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80eb8560, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci1
vgapci1: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <Haswell GT2 mobile> on vgapci1
agp0: aperture size is 256M, detected 32764k stolen memory
vgapci1: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xf7a14000-0xf7a17fff irq 16 at device 3.0 on pci0
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7a00000-0xf7a0ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7a1c000-0xf7a1c3ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac1: <Intel Lynx Point HDA Controller> mem 0xf7a10000-0xf7a13fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <unknown> at device 0.0 (no driver attached)
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf7814000-0xf7814fff,0xf7810000-0xf7813fff irq 19 at device 0.1 on pci4
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x5c800000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 80:fa:5b:07:fc:3d
re0: netmap queues/slots: TX 1/256, RX 1/256
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7a1b000-0xf7a1b3ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7a1a000-0xf7a1a7ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
usbus0: 5.0Gbps Super Speed USB v3.0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm1: <Intel Haswell (HDMI/DP 8ch)> at nid 6 on hdaa0
pcm2: <Intel Haswell (HDMI/DP 8ch)> at nid 7 on hdaa0
hdacc1: <VIA VT1802_1 HDA CODEC> at cad 0 on hdac1
hdaa1: <VIA VT1802_1 Audio Function Group> at nid 1 on hdacc1
pcm3: <VIA VT1802_1 (Analog)> at nid 36 and 43 on hdaa1
pcm4: <VIA VT1802_1 (Analog)> at nid 37 and 48 on hdaa1
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich4 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD5000LPVX-00V0TT0 01.01A01> ACS-2 ATA SATA 3.x device
ada0: Serial Number WD-WX61A25C78LL
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich5 bus 0 scbus1 target 0 lun 0
ada1: <Samsung SSD 840 EVO 250GB mSATA EXT41B6Q> ACS-2 ATA SATA 3.x device
ada1: Serial Number S1KPNSAF502033T
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada1: quirks=0x1<4K>
ada1: Previously was known as ad6
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #5 Launched!
Timecounter "TSC-low" frequency 1247137981 Hz quality 1000
WARNING: WITNESS option enabled, expect reduced performance.
Root mount waiting for: usbus2 usbus1 usbus0
uhub1: 2 ports with 2 removable, self powered
random: unblocking device.
uhub2: 2 ports with 2 removable, self powered
uhub0: 21 ports with 21 removable, self powered
Root mount waiting for: usbus2 usbus1 usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2
ugen0.2: <Sierra Wireless, Incorporated> at usbus0
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
Trying to mount root from zfs:root []...
siba_bwn0: <Broadcom BCM4312 802.11b/g Wireless> mem 0xf7900000-0xf7903fff irq 18 at device 0.0 on pci3
bwn0 on siba_bwn0
bwn0: WLAN (chipid 0x4312 rev 15) PHY (analog 6 type 5 rev 1) RADIO (manuf 0x17f ver 0x2062 rev 2)
bwn0: DMA (64 bits)
bwn0: Using 1 MSI messages
KLD bwn_v4_lp_ucode.ko: depends on kernel - not available or version mismatch
linker_load_file: Unsupported file type
re0: link state changed to DOWN
u3g0: <Data Interface> on usbus0
u3g0: Found 3 ports.
info: [drm] Initialized drm 1.1.0 20060810
[drm:pid766:drm_probe_helper] drmn1 desc: Intel Haswell (GT2 mobile)
drmn1: <Intel Haswell (GT2 mobile)> on vgapci1
[drm:pid766:drm_get_pci_dev] 
[drm:pid766:drm_ctxbitmap_next] bit : 0
[drm:pid766:drm_ctxbitmap_init] drm_ctxbitmap_init : 0
[drm:pid766:drm_get_minor] 
[drm:pid766:drm_get_minor] new minor assigned 65
[drm:pid766:drm_get_minor] 
[drm:pid766:drm_get_minor] new minor assigned 1
[drm:KMS:pid766:i915_dump_device_info] i915 device info: gen=7, pciid=0x0416 flags=is_mobile,need_gfx_hws,is_haswell,has_force_wake,has_hotplug,has_bsd_ring,has_blt_ring,has_llc,info: [drm] Memory usable by graphics device = 2048M
[drm:KMS:pid766:i915_gem_gtt_init] GMADR size = 256M
[drm:KMS:pid766:i915_gem_gtt_init] GTT stolen size = 0M
[drm:pid766:drm_addmap_core] offset = 0xf7400000, size = 0x00200000, type = 1
info: [drm] MTRR allocation failed.  Graphics performance may suffer.
[drm:KMS:pid766:intel_detect_pch] Found LynxPoint PCH
iicbus0: <Philips I2C bus>error: [drm:pid766:i915_write32] *ERROR* Unknown unclaimed register before writing to c5100
 on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb1 addr 0x0
iic2: <I2C generic I/O> on iicbus2
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb2 addr 0x0
iic4: <I2C generic I/O> on iicbus4
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb3 addr 0x0
iic6: <I2C generic I/O> on iicbus6
iic7: <I2C generic I/O> on iicbus7
iicbus8: <Philips I2C bus> on iicbb4 addr 0x0
iic8: <I2C generic I/O> on iicbus8
iic9: <I2C generic I/O> on iicbus9
iicbus10: <Philips I2C bus> on iicbb5 addr 0x0
iic10: <I2C generic I/O> on iicbus10
iic11: <I2C generic I/O> on iicbus11
[drm:pid766:intel_opregion_setup] graphic opregion physical addr: 0xcb795018
[drm:pid766:intel_opregion_setup] Public ACPI methods supported
[drm:pid766:intel_opregion_setup] SWSCI supported
[drm:pid766:intel_opregion_setup] ASLE supported
[drm:pid766:drm_pci_enable_msi] MSI count = 1
info: [drm] MSI enabled 1 message(s)
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
[drm:KMS:pid766:init_vbt_defaults] Set default to SSC at 100MHz
[drm:KMS:pid766:intel_parse_bios] Using VBT from OpRegion: $VBT HASWELL        d
[drm:KMS:pid766:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0 fdi_rx_polarity_inverted 0
[drm:KMS:pid766:parse_general_definitions] crt_ddc_bus_pin: 0
[drm:KMS:pid766:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
[drm:KMS:pid766:drm_mode_debug_printmodeline] Modeline 0:"2560x1440" 0 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x8 0xa
[drm:KMS:pid766:parse_lfp_panel_data] VBT initial LVDS value 30033c
[drm:KMS:pid766:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
[drm:KMS:pid766:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[drm:KMS:pid766:parse_sdvo_device_mapping] No SDVO device info is found in VBT
[drm:KMS:pid766:intel_modeset_init] 3 display pipes available.
[drm:KMS:pid766:intel_ddi_pll_init] CDCLK running at 540MHz
[drm:KMS:pid766:intel_pch_pll_init] No PCH PLLs on this hardware, skipping initialisation
[drm:KMS:pid766:intel_lvds_init] LVDS is not present in VBT
[drm:KMS:pid766:intel_dp_init_panel_power_sequencer] cur t1_t3 3000 t8 0 t9 3808 t10 500 t11_t12 6000
[drm:KMS:pid766:intel_dp_init_panel_power_sequencer] vbt t1_t3 3000 t8 10 t9 12000 t10 500 t11_t12 5000
[drm:KMS:pid766:intel_dp_init_panel_power_sequencer] panel power up delay 300, power down delay 50, power cycle delay 600
[drm:KMS:pid766:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 1200
[drm:KMS:pid766:intel_dp_i2c_init] i2c_init DPDDC-A
[drm:KMS:pid766:ironlake_edp_panel_vdd_on] Turn eDP VDD on
[drm:KMS:pid766:ironlake_edp_panel_vdd_on] PCH_PP_STATUS: 0x80000008 PCH_PP_CONTROL: 0xabcd000f
[drm:KMS:pid766:intel_dp_i2c_aux_ch] aux_i2c nack
[drm:KMS:pid766:intel_dp_i2c_aux_ch] aux_i2c nack
[drm:KMS:pid766:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1
[drm:KMS:pid766:ironlake_edp_panel_vdd_on] Turn eDP VDD on
[drm:KMS:pid766:ironlake_edp_panel_vdd_on] eDP VDD already on
[drm:KMS:pid766:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1
[drm:KMS:pid766:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0xbb8000a, PP_OFF 0x1f40ee0, PP_DIV 0x186906
[drm:KMS:pid766:ironlake_edp_panel_vdd_on] Turn eDP VDD on
[drm:KMS:pid766:ironlake_edp_panel_vdd_on] eDP VDD already on
[drm:KMS:pid766:iic_dp_aux_xfer] dp_aux_xfer return 0
[drm:KMS:pid766:iic_dp_aux_xfer] dp_aux_xfer return 0
[drm:KMS:pid766:drm_edid_to_eld] ELD: no CEA Extension found
[drm:KMS:pid766:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1
[drm:KMS:pid766:intel_panel_get_backlight] get backlight PWM = 5273
[drm:KMS:pid766:intel_dp_i2c_init] i2c_init DPDDC-C
[drm:KMS:pid766:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid766:intel_dp_i2c_aux_ch] aux_ch failed -60
[drm:KMS:pid766:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid766:intel_dp_i2c_aux_ch] aux_ch failed -60
[drm:KMS:pid766:intel_dp_i2c_init] i2c_init DPDDC-D
[drm:KMS:pid766:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid766:intel_dp_i2c_aux_ch] aux_ch failed -60
[drm:KMS:pid766:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid766:intel_dp_i2c_aux_ch] aux_ch failed -60
drmn1: taking over the fictitious range 0xd0000000-0xe0000000
[drm:KMS:pid766:init_status_page] render ring hws offset: 0x00000000
[drm:KMS:pid766:init_status_page] bsd ring hws offset: 0x00022000
[drm:KMS:pid766:init_status_page] blitter ring hws offset: 0x00043000
[drm:KMS:pid766:create_default_context] Default HW context loaded
[drm:KMS:pid766:i915_gem_context_init] HW context support initialized
[drm:KMS:pid766:intel_prepare_ddi_buffers] Initializing DDI buffers for port A in DP mode
[drm:KMS:pid766:intel_prepare_ddi_buffers] Initializing DDI buffers for port B in DP mode
[drm:KMS:pid766:intel_prepare_ddi_buffers] Initializing DDI buffers for port C in DP mode
[drm:KMS:pid766:intel_prepare_ddi_buffers] Initializing DDI buffers for port D in DP mode
[drm:KMS:pid766:intel_prepare_ddi_buffers] Initializing DDI buffers for port E in FDI mode
[drm:KMS:pid766:intel_modeset_setup_hw_state] Pipe A using transcoder EDP
[drm:KMS:pid766:intel_modeset_setup_hw_state] [CRTC:3] hw state readout: enabled
[drm:KMS:pid766:intel_modeset_setup_hw_state] [CRTC:5] hw state readout: disabled
[drm:KMS:pid766:intel_modeset_setup_hw_state] [CRTC:7] hw state readout: disabled
[drm:KMS:pid766:intel_ddi_get_crtc_pll] Pipe A connected to port A using clock 0x20000000
[drm:KMS:pid766:intel_modeset_setup_hw_state] [ENCODER:9:TMDS-9] hw state readout: enabled, pipe=0
[drm:KMS:pid766:intel_modeset_setup_hw_state] [ENCODER:17:TMDS-17] hw state readout: disabled, pipe=0
[drm:KMS:pid766:intel_modeset_setup_hw_state] [ENCODER:20:TMDS-20] hw state readout: disabled, pipe=0
[drm:KMS:pid766:intel_modeset_setup_hw_state] [CONNECTOR:10:eDP-1] hw state readout: enabled
[drm:KMS:pid766:intel_modeset_setup_hw_state] [CONNECTOR:18:HDMI-A-1] hw state readout: disabled
[drm:KMS:pid766:intel_modeset_setup_hw_state] [CONNECTOR:19:DP-1] hw state readout: disabled
[drm:KMS:pid766:intel_modeset_setup_hw_state] [CONNECTOR:21:HDMI-A-2] hw state readout: disabled
[drm:KMS:pid766:intel_modeset_setup_hw_state] [CONNECTOR:22:DP-2] hw state readout: disabled
[drm:KMS:pid766:intel_connector_check_state] [CONNECTOR:10:eDP-1]
[drm:KMS:pid766:intel_modeset_check_state] [ENCODER:9:TMDS-9]
[drm:KMS:pid766:intel_modeset_check_state] [ENCODER:17:TMDS-17]
[drm:KMS:pid766:intel_modeset_check_state] [ENCODER:20:TMDS-20]
[drm:KMS:pid766:intel_modeset_check_state] [CRTC:3]
[drm:KMS:pid766:intel_modeset_check_state] [CRTC:5]
[drm:KMS:pid766:intel_modeset_check_state] [CRTC:7]
[drm:pid766:drm_irq_install] irq=270
info: [drm] Connector eDP-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.eDP-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.HDMI-A-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector DP-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.DP-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-2: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.HDMI-A-2
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector DP-2: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.DP-2
info: [drm]   - kern.vt.fb.default_mode
[drm:KMS:pid766:drm_helper_probe_single_connector_modes] [CONNECTOR:10:eDP-1]
[drm:KMS:pid766:intel_dp_detect] DPCD: 12 0A FF 40 01 00 00 00 02 00 00 00 10 0B 01

[drm:KMS:pid766:drm_edid_to_eld] ELD: no CEA Extension found
[drm:KMS:pid766:drm_helper_probe_single_connector_modes] [CONNECTOR:10:eDP-1] probed modes :
[drm:KMS:pid766:drm_mode_debug_printmodeline] Modeline 23:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0xa
[drm:KMS:pid766:drm_helper_probe_single_connector_modes] [CONNECTOR:18:HDMI-A-1]
[drm:KMS:pid766:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[drm:KMS:pid766:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6
[drm:KMS:pid766:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[drm:KMS:pid766:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6
[drm:KMS:pid766:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[drm:KMS:pid766:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6
[drm:KMS:pid766:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[drm:KMS:pid766:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6
[drm:KMS:pid766:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[drm:KMS:pid766:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6
[drm:KMS:pid766:drm_helper_probe_single_connector_modes] [CONNECTOR:18:HDMI-A-1] disconnected
[drm:KMS:pid766:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-1]
[drm:KMS:pid766:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid766:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid766:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid766:intel_dp_detect] DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

[drm:KMS:pid766:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-1] disconnected
[drm:KMS:pid766:drm_helper_probe_single_connector_modes] [CONNECTOR:21:HDMI-A-2]
[drm:KMS:pid766:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[drm:KMS:pid766:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6
[drm:KMS:pid766:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[drm:KMS:pid766:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6
[drm:KMS:pid766:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[drm:KMS:pid766:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6
[drm:KMS:pid766:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[drm:KMS:pid766:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6
[drm:KMS:pid766:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[drm:KMS:pid766:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6
[drm:KMS:pid766:drm_helper_probe_single_connector_modes] [CONNECTOR:21:HDMI-A-2] disconnected
[drm:KMS:pid766:drm_helper_probe_single_connector_modes] [CONNECTOR:22:DP-2]
[drm:KMS:pid766:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid766:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid766:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid766:intel_dp_detect] DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

[drm:KMS:pid766:drm_helper_probe_single_connector_modes] [CONNECTOR:22:DP-2] disconnected
[drm:KMS:pid766:drm_setup_crtcs] 
[drm:KMS:pid766:drm_enable_connectors] connector 10 enabled? yes
[drm:KMS:pid766:drm_enable_connectors] connector 18 enabled? no
[drm:KMS:pid766:drm_enable_connectors] connector 19 enabled? no
[drm:KMS:pid766:drm_enable_connectors] connector 21 enabled? no
[drm:KMS:pid766:drm_enable_connectors] connector 22 enabled? no
[drm:KMS:pid766:drm_target_preferred] looking for cmdline mode on connector 10
[drm:KMS:pid766:drm_target_preferred] looking for preferred mode on connector 10
[drm:KMS:pid766:drm_target_preferred] found mode 2560x1440
[drm:KMS:pid766:drm_setup_crtcs] picking CRTCs for 8192x8192 config
[drm:KMS:pid766:drm_setup_crtcs] desired mode 2560x1440 set on crtc 3
[drm:KMS:pid766:intelfb_create] allocated 2560x1440 (s 24bits) fb: 0x00073000, bo 0xfffff8007fbc9400
fbd1 on drmn1
VT: Replacing driver "vga" with new "fb".
[drm:KMS:pid0:intel_crtc_set_config] [CRTC:3] [FB:24] #connectors=1 (x y) (0 0)
[drm:KMS:pid0:intel_set_config_compute_mode_changes] crtc has no fb, full mode set
[drm:KMS:pid0:intel_set_config_compute_mode_changes] modes are different, full mode set
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 11:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0xa
[drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:10:eDP-1] to [CRTC:3]
[drm:KMS:pid0:intel_crtc_set_config] attempting to set mode from userspace
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 11:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0xa
[drm:KMS:pid0:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[drm:KMS:pid0:intel_dp_mode_fixup] DP link computation with max lane count 4 max bw 0a pixel clock 241500KHz
[drm:KMS:pid0:intel_dp_mode_fixup] DP link bw 0a lane count 4 clock 270000 bpp 24
[drm:KMS:pid0:intel_dp_mode_fixup] DP link bw required 579600 available 864000
[drm:KMS:pid0:intel_modeset_adjusted_mode] [CRTC:3]
[drm:KMS:pid0:intel_panel_actually_set_backlight] set backlight PWM = 0
[drm:KMS:pid0:ironlake_edp_backlight_off] 
info: [drm] Initialized i915 1.6.0 20080730 for drmn1 on minor 1
[drm:KMS:pid0:intel_enable_rc6] Haswell: only RC6 available
info: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[drm:pid0:drm_calc_vbltimestamp_from_scanoutpos] crtc 0: Noop due to uninitialized mode.
[drm:KMS:pid0:ironlake_edp_panel_vdd_on] Turn eDP VDD on
[drm:KMS:pid0:ironlake_edp_panel_vdd_on] eDP VDD already on
[drm:KMS:pid0:ironlake_edp_panel_off] Turn eDP power off
[drm:KMS:pid0:ironlake_wait_panel_off] Wait for panel power off time
[drm:KMS:pid0:ironlake_wait_panel_status] mask b000000f value 00000000 status 80000008 control abcd0000
[drm:pid0:drm_vblank_get] enabling vblank on crtc 0, ret: -22
[drm:KMS:pid0:intel_choose_pipe_bpp_dither] clamping display bpc (was -1) to EDID reported max of 8
[drm:KMS:pid0:intel_choose_pipe_bpp_dither] setting pipe bpc to 8 (max display bpc 8)
[drm:KMS:pid0:haswell_crtc_mode_set] Mode for pipe 0:
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 11:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0xa
[drm:KMS:pid0:ironlake_update_plane] Writing base 00073000 00000000 0 0 10240
[drm:KMS:pid0:intel_crtc_mode_set] [ENCODER:9:TMDS-9] set [MODE:11:2560x1440]
[drm:KMS:pid0:intel_ddi_mode_set] Preparing DDI mode for Haswell on port A, pipe A
[drm:KMS:pid0:sandybridge_update_wm] FIFO watermarks For pipe A - plane 25, cursor: 6
[drm:KMS:pid0:ironlake_edp_panel_vdd_on] Turn eDP VDD on
[drm:KMS:pid0:ironlake_wait_panel_power_cycle] Wait for panel power cycle
[drm:KMS:pid0:ironlake_wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
[drm:KMS:pid0:ironlake_edp_panel_vdd_on] PCH_PP_STATUS: 0x00000000 PCH_PP_CONTROL: 0xabcd0008
[drm:KMS:pid0:ironlake_edp_panel_vdd_on] eDP was not running
[drm:KMS:pid0:ironlake_edp_panel_on] Turn eDP power on
[drm:KMS:pid0:ironlake_wait_panel_power_cycle] Wait for panel power cycle
[drm:KMS:pid0:ironlake_wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
[drm:KMS:pid0:ironlake_wait_panel_on] Wait for panel power on
[drm:KMS:pid0:ironlake_wait_panel_status] mask b000000f value 80000008 status 9000000a control abcd000b
[drm:KMS:pid0:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1
[drm:KMS:pid0:ironlake_panel_vdd_off_sync] PCH_PP_STATUS: 0x80000008 PCH_PP_CONTROL: 0xabcd0003
[drm:KMS:pid0:intel_dp_start_link_train] training pattern 1 signal levels 00000000
[drm:KMS:pid0:intel_dp_start_link_train] clock recovery OK
[drm:KMS:pid0:intel_dp_complete_link_train] Channel EQ done. DP Training successfull
error: [drm:pid0:intel_dp_set_link_train] *ERROR* Timed out waiting for DP idle patterns
error: [drm:pid0:i915_write32] *ERROR* Unknown unclaimed register before writing to 64040
[drm:KMS:pid0:ironlake_edp_backlight_on] 
[drm:KMS:pid0:intel_panel_actually_set_backlight] set backlight PWM = 5273
[drm:pid0:drm_calc_timestamping_constants] crtc 3: hwmode: htotal 2720, vtotal 1481, vdisplay 1440
[drm:pid0:drm_calc_timestamping_constants] crtc 3: clock 270000 kHz framedur 14919594 linedur 10074, pixeldur 3
[drm:KMS:pid0:intel_connector_check_state] [CONNECTOR:10:eDP-1]
[drm:KMS:pid0:intel_modeset_check_state] [ENCODER:9:TMDS-9]
[drm:KMS:pid0:intel_modeset_check_state] [ENCODER:17:TMDS-17]
[drm:KMS:pid0:intel_modeset_check_state] [ENCODER:20:TMDS-20]
[drm:KMS:pid0:intel_modeset_check_state] [CRTC:3]
[drm:KMS:pid0:intel_modeset_check_state] [CRTC:5]
[drm:KMS:pid0:intel_modeset_check_state] [CRTC:7]
[drm:KMS:pid0:intel_crtc_set_config] [CRTC:5] [NOFB]
[drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:10:eDP-1] to [CRTC:3]
[drm:KMS:pid0:intel_crtc_set_config] [CRTC:7] [NOFB]
[drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:10:eDP-1] to [CRTC:3]
\000

More information about the freebsd-x11 mailing list