Testing the new i915 driver (HD Graphics 4400)
Juan Ramón Molina Menor
listjm at club.fr
Thu Oct 8 15:00:10 UTC 2015
Hi Jean.
# uname -a
FreeBSD Kingston.Juan.home 11.0-CURRENT FreeBSD 11.0-CURRENT #0
aa4280f(drm-i915-update-38): Thu Oct 8 11:53:57 CEST 2015
root at BSD-Cathy.juan.home:/usr/obj/root/freebsd-base-graphics/sys/GENERIC
amd64
This is a Lenovo ThinkPad S3-S440 with an Intel HD Graphics 4400 (Haswell).
The i915kms kernel module loads without issues but Xorg startx fails
with no screens found (see attached file). I didn’t use a xorg.conf file.
On the other hand, Xorg works nicely with the scfb driver.
Thanks in advance and don’t hesitate to ask for further testing.
Juan
-------------- next part --------------
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 aa4280f(drm-i915-update-38): Thu Oct 8 11:53:57 CEST 2015
root at BSD-Cathy.juan.home:/usr/obj/root/freebsd-base-graphics/sys/GENERIC amd64
FreeBSD clang version 3.6.1 (tags/RELEASE_361/final 237755) 20150525
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 1600x900
CPU: Intel(R) Core(TM) i3-4030U CPU @ 1.90GHz (1895.65-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
XSAVE Features=0x1<XSAVEOPT>
VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 4019113984 (3832 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-J3 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-39 on motherboard
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80edebd0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TP-J3> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff at device 2.0 on pci0
acpi_video0: <ACPI video extension> on vgapci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xf0710000-0xf0713fff at device 3.0 on pci0
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf0700000-0xf070ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xf0714000-0xf0717fff at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xf0604000-0xf0604fff,0xf0600000-0xf0603fff at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x50800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: f0:76:1c:04:33:26
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
iwm0: <Intel Dual Band Wireless AC 7260> mem 0xf0500000-0xf0501fff at device 0.0 on pci3
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <unknown> at device 0.0 (no driver attached)
ehci0: <Intel Lynx Point LP USB 2.0 controller USB> mem 0xf071d000-0xf071d3ff at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x4088-0x408f,0x4094-0x4097,0x4080-0x4087,0x4090-0x4093,0x4060-0x407f mem 0xf071c000-0xf071c7ff at device 31.2 on pci0
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Conexant (0x510f) HDA CODEC> at cad 0 on hdac1
hdaa1: <Conexant (0x510f) Audio Function Group> at nid 1 on hdacc1
pcm1: <Conexant (0x510f) (Analog)> at nid 23 and 26 on hdaa1
pcm2: <Conexant (0x510f) (Front Analog)> at nid 22 and 25 on hdaa1
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
iwm0: revision: 0x140, firmware 25.228 (API ver. 9)
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SAMSUNG MZ7TE128HMGR-000L1 EXT06L0Q> ACS-2 ATA SATA 3.x device
ada0: Serial Number S1GFNSBFA13636
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 122104MB (250069680 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC" frequency 1895654564 Hz quality 1000
WARNING: WITNESS option enabled, expect reduced performance.
Root mount waiting for: usbus1 usbus0
uhub0: 13 ports with 13 removable, self powered
Root mount waiting for: usbus1 usbus0
uhub1: 3 ports with 3 removable, self powered
ugen1.2: <vendor 0x8087> at usbus1
uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1
Root mount waiting for: usbus1 usbus0
ugen0.2: <Kingston> at usbus0
umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.00, addr 1> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0xc100
umass0:1:0: Attached to scbus1
da0 at umass-sim0 bus 0 scbus1 target 0 lun 0
da0: <Kingston DataTraveler 2.0 PMAP> Removable Direct Access SCSI device
da0: Serial Number 5B7618B4DFDD
da0: 40.000MB/s transfers
da0: 3936MB (8060928 512 byte sectors: 255H 63S/T 501C)
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
uhub2: 8 ports with 8 removable, self powered
Root mount waiting for: usbus0
usb_alloc_device: set address 3 failed (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR
Root mount waiting for: usbus0
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_TIMEOUT
ugen0.3: <Unknown> at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
Root mount waiting for: usbus0
ugen0.3: <Vimicro corp.> at usbus0
Root mount waiting for: usbus0
ugen0.4: <vendor 0x138a> at usbus0
Trying to mount root from ufs:/dev/da0p2 [rw,noatime]...
wlan0: Ethernet address: f8:16:54:df:f6:b5
re0: link state changed to DOWN
iwm0: iwm_update_edca: called
iwm0: iwm_update_edca: called
wlan0: link state changed to UP
-------------- next part --------------
[ 149.610]
X.Org X Server 1.14.7
Release Date: 2014-06-05
[ 149.611] X Protocol Version 11, Revision 0
[ 149.611] Build Operating System: FreeBSD 11.0-CURRENT amd64
[ 149.611] Current Operating System: FreeBSD Kingston.Juan.home 11.0-CURRENT FreeBSD 11.0-CURRENT #0 aa4280f(drm-i915-update-38): Thu Oct 8 11:53:57 CEST 2015 root at BSD-Cathy.juan.home:/usr/obj/root/freebsd-base-graphics/sys/GENERIC amd64
[ 149.612] Build Date: 15 September 2015 05:20:50AM
[ 149.612]
[ 149.612] Current version of pixman: 0.32.6
[ 149.612] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 149.612] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 149.612] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 8 16:48:36 2015
[ 149.638] (II) Loader magic: 0x8010d0
[ 149.638] (II) Module ABI versions:
[ 149.638] X.Org ANSI C Emulation: 0.4
[ 149.638] X.Org Video Driver: 14.1
[ 149.638] X.Org XInput driver : 19.1
[ 149.638] X.Org Server Extension : 7.0
[ 149.647] (--) PCI:*(0:0:2:0) 8086:0a16:17aa:501c rev 11, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/65536
[ 149.647] (==) Using default built-in configuration (30 lines)
[ 149.647] (==) --- Start of built-in configuration ---
[ 149.647] Section "Device"
[ 149.647] Identifier "Builtin Default intel Device 0"
[ 149.647] Driver "intel"
[ 149.647] EndSection
[ 149.647] Section "Screen"
[ 149.647] Identifier "Builtin Default intel Screen 0"
[ 149.647] Device "Builtin Default intel Device 0"
[ 149.647] EndSection
[ 149.647] Section "Device"
[ 149.647] Identifier "Builtin Default vesa Device 0"
[ 149.647] Driver "vesa"
[ 149.647] EndSection
[ 149.647] Section "Screen"
[ 149.647] Identifier "Builtin Default vesa Screen 0"
[ 149.647] Device "Builtin Default vesa Device 0"
[ 149.647] EndSection
[ 149.647] Section "Device"
[ 149.647] Identifier "Builtin Default fbdev Device 0"
[ 149.647] Driver "fbdev"
[ 149.647] EndSection
[ 149.648] Section "Screen"
[ 149.648] Identifier "Builtin Default fbdev Screen 0"
[ 149.648] Device "Builtin Default fbdev Device 0"
[ 149.648] EndSection
[ 149.648] Section "ServerLayout"
[ 149.648] Identifier "Builtin Default Layout"
[ 149.648] Screen "Builtin Default intel Screen 0"
[ 149.648] Screen "Builtin Default vesa Screen 0"
[ 149.648] Screen "Builtin Default fbdev Screen 0"
[ 149.648] EndSection
[ 149.648] (==) --- End of built-in configuration ---
[ 149.648] (==) ServerLayout "Builtin Default Layout"
[ 149.648] (**) |-->Screen "Builtin Default intel Screen 0" (0)
[ 149.648] (**) | |-->Monitor "<default monitor>"
[ 149.654] (**) | |-->Device "Builtin Default intel Device 0"
[ 149.654] (==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
[ 149.654] (**) |-->Screen "Builtin Default vesa Screen 0" (1)
[ 149.654] (**) | |-->Monitor "<default monitor>"
[ 149.655] (**) | |-->Device "Builtin Default vesa Device 0"
[ 149.655] (==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
[ 149.655] (**) |-->Screen "Builtin Default fbdev Screen 0" (2)
[ 149.655] (**) | |-->Monitor "<default monitor>"
[ 149.655] (**) | |-->Device "Builtin Default fbdev Device 0"
[ 149.655] (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
[ 149.655] (==) Automatically adding devices
[ 149.655] (==) Automatically enabling devices
[ 149.655] (==) Not automatically adding GPU devices
[ 149.684] (WW) The directory "/usr/local/share/fonts/Type1/" does not exist.
[ 149.684] Entry deleted from font path.
[ 149.695] (WW) `fonts.dir' not found (or not valid) in "/usr/local/share/fonts/75dpi/".
[ 149.695] Entry deleted from font path.
[ 149.695] (Run 'mkfontdir' on "/usr/local/share/fonts/75dpi/").
[ 149.695] (==) FontPath set to:
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/100dpi/
[ 149.695] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[ 149.695] (II) The server relies on devd to provide the list of input devices.
If no devices become available, reconfigure devd or disable AutoAddDevices.
[ 149.695] Initializing built-in extension Generic Event Extension
[ 149.695] Initializing built-in extension SHAPE
[ 149.695] Initializing built-in extension MIT-SHM
[ 149.695] Initializing built-in extension XInputExtension
[ 149.695] Initializing built-in extension XTEST
[ 149.695] Initializing built-in extension BIG-REQUESTS
[ 149.695] Initializing built-in extension SYNC
[ 149.695] Initializing built-in extension XKEYBOARD
[ 149.695] Initializing built-in extension XC-MISC
[ 149.695] Initializing built-in extension XINERAMA
[ 149.695] Initializing built-in extension XFIXES
[ 149.695] Initializing built-in extension RENDER
[ 149.696] Initializing built-in extension RANDR
[ 149.696] Initializing built-in extension COMPOSITE
[ 149.696] Initializing built-in extension DAMAGE
[ 149.696] Initializing built-in extension MIT-SCREEN-SAVER
[ 149.696] Initializing built-in extension DOUBLE-BUFFER
[ 149.696] Initializing built-in extension RECORD
[ 149.696] Initializing built-in extension DPMS
[ 149.696] Initializing built-in extension X-Resource
[ 149.696] Initializing built-in extension XVideo
[ 149.696] Initializing built-in extension XVideo-MotionCompensation
[ 149.696] Initializing built-in extension XFree86-VidModeExtension
[ 149.696] Initializing built-in extension XFree86-DGA
[ 149.696] Initializing built-in extension XFree86-DRI
[ 149.696] Initializing built-in extension DRI2
[ 149.696] (II) LoadModule: "glx"
[ 149.698] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[ 149.715] (II) Module glx: vendor="X.Org Foundation"
[ 149.715] compiled for 1.14.7, module version = 1.0.0
[ 149.715] ABI class: X.Org Server Extension, version 7.0
[ 149.715] (==) AIGLX enabled
[ 149.727] Loading extension GLX
[ 149.727] (II) LoadModule: "intel"
[ 149.735] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
[ 149.777] (II) Module intel: vendor="X.Org Foundation"
[ 149.777] compiled for 1.14.7, module version = 2.21.15
[ 149.777] Module class: X.Org Video Driver
[ 149.777] ABI class: X.Org Video Driver, version 14.1
[ 149.777] (II) LoadModule: "vesa"
[ 149.778] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
[ 149.782] (II) Module vesa: vendor="X.Org Foundation"
[ 149.782] compiled for 1.14.7, module version = 2.3.3
[ 149.782] Module class: X.Org Video Driver
[ 149.782] ABI class: X.Org Video Driver, version 14.1
[ 149.782] (II) LoadModule: "fbdev"
[ 149.785] (WW) Warning, couldn't open module fbdev
[ 149.785] (II) UnloadModule: "fbdev"
[ 149.785] (II) Unloading fbdev
[ 149.785] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 149.785] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 149.792] (II) VESA: driver for VESA chipsets: vesa
[ 149.795] (--) Using syscons driver with X support (version 2.0)
[ 149.795] (--) using VT number 9
[ 149.809] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 149.809] (II) Loading sub module "vbe"
[ 149.809] (II) LoadModule: "vbe"
[ 149.809] (II) Loading /usr/local/lib/xorg/modules/libvbe.so
[ 149.814] (II) Module vbe: vendor="X.Org Foundation"
[ 149.814] compiled for 1.14.7, module version = 1.1.0
[ 149.814] ABI class: X.Org Video Driver, version 14.1
[ 149.815] (II) Loading sub module "int10"
[ 149.815] (II) LoadModule: "int10"
[ 149.815] (II) Loading /usr/local/lib/xorg/modules/libint10.so
[ 149.827] (II) Module int10: vendor="X.Org Foundation"
[ 149.827] compiled for 1.14.7, module version = 1.0.0
[ 149.827] ABI class: X.Org Video Driver, version 14.1
[ 149.827] (II) VESA(0): initializing int10
[ 149.829] (EE) VESA(0): V_BIOS address 0x4bdd0 out of range
[ 149.830] (II) UnloadModule: "vesa"
[ 149.830] (II) UnloadSubModule: "int10"
[ 149.830] (II) Unloading int10
[ 149.830] (II) UnloadSubModule: "vbe"
[ 149.830] (II) Unloading vbe
[ 149.830] (EE) Screen(s) found, but none have a usable configuration.
[ 149.830] (EE)
Fatal server error:
[ 149.830] (EE) no screens found(EE)
[ 149.830] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 149.830] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 149.830] (EE)
[ 149.837] (EE) Server terminated with error (1). Closing log file.
More information about the freebsd-x11
mailing list