Testing the new i915 driver
Thomas Mueller
mueller6724 at bellsouth.net
Tue Nov 3 09:18:27 UTC 2015
I just tried the new i915 driver on a system with Intel Sandy Bridge graphics.
I am now in a uxterm on X with window manager icewm, am typing this with vi editor.
I made the appropriate change in /etc/sysctl.conf and loader tunables.
I was able to go into Seamonkey web browser successfully.
Video on boot was regular vt with 30(?)-line console.
After kldload i915kms, console went into vt framebuffer 1920x1080 resolution as I get when I boot NetBSD with DRMKMS or in FreeBSD after I exit from X.
I saved /var/run/dmesg.boot to another place just in case of crash, so as not to be overwritten by /var/run/dmesg.boot on next reboot.
/var/run/dmesg.boot is
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-STABLE #2: Mon Jan 26 21:18:36 UTC 2015
root at amelia:/usr/obj/usr/src/sys/SANDY10NC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT: running with driver "vga".
CPU: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (3392.37-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1f9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16482471936 (15718 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xfe000000-0xfe3fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
agp0: <SandyBridge desktop GT2+ IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
vgapci0: Boot video device
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe706000-0xfe7063ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
hdac0: <Intel Cougar Point HDA Controller> mem 0xfe700000-0xfe703fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 16 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 8c:89:a5:13:15:54
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <serial bus, FireWire> at device 0.0 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci5: <ACPI PCI bus> on pcib5
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfe500000-0xfe501fff irq 18 at device 0.0 on pci5
xhci0: 32 byte context size.
usbus1 on xhci0
pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci6: <ACPI PCI bus> on pcib6
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfe400000-0xfe401fff irq 19 at device 0.0 on pci6
xhci1: 64 byte context size.
usbus2 on xhci1
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe705000-0xfe7053ff irq 23 at device 29.0 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel Cougar Point SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf0d0-0xf0df,0xf0c0-0xf0cf irq 19 at device 31.2 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
atapci1: <Intel Cougar Point SATA300 controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf070-0xf07f,0xf060-0xf06f irq 19 at device 31.5 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
random: unblocking device.
usbus0: 480Mbps High Speed USB v2.0
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC892 HDA CODEC> at cad 1 on hdac0
hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
pcm1: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0
pcm3: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa0
hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc1
pcm4: <Intel Cougar Point (HDMI/DP 8ch)> at nid 6 on hdaa1
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 5.0Gbps Super Speed USB v3.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <0x1033> at usbus1
uhub1: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen2.1: <0x1912> at usbus2
uhub2: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
usbus3: 480Mbps High Speed USB v2.0
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub1: 4 ports with 4 removable, self powered
uhub2: 8 ports with 8 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <ST4000VN000-1H4168 SC44> ATA-9 SATA 3.x device
ada0: Serial Number Z301KSG0
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: 3815447MB (7814037168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad0
cd0 at ata2 bus 0 scbus2 target 0 lun 0
cd0: <PLEXTOR DVDR PX-L890SA 1.05> Removable CD-ROM SCSI-0 device
cd0: Serial Number 3524332 228111500685
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: cd present [41580 x 2048 byte records]
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #5 Launched!
Timecounter "TSC-low" frequency 1696183782 Hz quality 1000
ugen0.2: <vendor 0x8087> at usbus0
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen3.2: <vendor 0x8087> at usbus3
uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus3
uhub4: 6 ports with 6 removable, self powered
uhub5: 8 ports with 8 removable, self powered
ugen0.3: <Logitech> at usbus0
ugen3.3: <Kingston> at usbus3
umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.00, addr 3> on usbus3
umass0: SCSI over Bulk-Only; quirks = 0xc000
umass0:4:0:-1: Attached to scbus4
da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
da0: <Kingston DataTraveler 2.0 PMAP> Removable Direct Access SCSI-4 device
da0: Serial Number 1C6F654FF86BED11C9060649
da0: 40.000MB/s transfers
da0: 14887MB (30489408 512 byte sectors: 255H 63S/T 1897C)
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
ugen0.4: <JMicron> at usbus0
umass1: <MSC Bulk-Only Transfer> on usbus0
umass1: SCSI over Bulk-Only; quirks = 0x4000
umass1:5:1:-1: Attached to scbus5
da1 at umass-sim1 bus 1 scbus5 target 0 lun 0
da1: <IC35L040 AVVN07-0 > Fixed Direct Access SCSI-2 device
da1: Serial Number 6040A6680750
da1: 40.000MB/s transfers
da1: 39266MB (80418240 512 byte sectors: 255H 63S/T 5005C)
da1: quirks=0x2<NO_6_BYTE>
ugen3.4: <vendor 0x0930> at usbus3
umass2: <vendor 0x0930 USB Flash Memory, class 0/0, rev 2.00/1.10, addr 4> on usbus3
umass2: SCSI over Bulk-Only; quirks = 0xc000
umass2:6:2:-1: Attached to scbus6
da2 at umass-sim2 bus 2 scbus6 target 0 lun 0
da2: < USB Flash Memory 5.00> Removable Direct Access SCSI-0 device
da2: Serial Number 0E7057713281995D
da2: 40.000MB/s transfers
da2: 955MB (1956864 512 byte sectors: 64H 32S/T 955C)
da2: quirks=0x2<NO_6_BYTE>
GEOM: da1s1: invalid disklabel.
GEOM: diskid/DISK-6040A6680750s1: invalid disklabel.
ugen3.5: <Verbatim> at usbus3
umass3: <Verbatim STORE N GO, class 0/0, rev 2.00/1.00, addr 5> on usbus3
umass3: SCSI over Bulk-Only; quirks = 0xc101
umass3:7:3:-1: Attached to scbus7
da3 at umass-sim3 bus 3 scbus7 target 0 lun 0
da3: <Verbatim STORE N GO 2.66> Removable Direct Access SCSI-2 device
da3: Serial Number 78E63C7F2EBB0414
da3: 40.000MB/s transfers
da3: 3823MB (7829504 512 byte sectors: 255H 63S/T 487C)
da3: quirks=0x2<NO_6_BYTE>
Root mount waiting for: usbus3
Root mount waiting for: usbus3
ugen3.6: <vendor 0x13fe> at usbus3
umass4: <vendor 0x13fe USB DISK 2.0, class 0/0, rev 2.00/1.00, addr 6> on usbus3
umass4: SCSI over Bulk-Only; quirks = 0xc100
umass4:8:4:-1: Attached to scbus8
da4 at umass-sim4 bus 4 scbus8 target 0 lun 0
da4: < USB DISK 2.0 PMAP> Removable Direct Access SCSI-4 device
da4: Serial Number 070128EE03B2F983
da4: 40.000MB/s transfers
da4: 7454MB (15265792 512 byte sectors: 255H 63S/T 950C)
da4: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
ugen3.7: <Generic> at usbus3
umass5: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 7> on usbus3
umass5: SCSI over Bulk-Only; quirks = 0x4001
umass5:9:5:-1: Attached to scbus9
da5 at umass-sim5 bus 5 scbus9 target 0 lun 0
da5: <Generic- SD/MMC 1.00> Removable Direct Access SCSI-0 device
da5: Serial Number 058F63646476
da5: 40.000MB/s transfers
da5: Attempt to query device size failed: NOT READY, Medium not present
da5: quirks=0x2<NO_6_BYTE>
da6 at umass-sim5 bus 5 scbus9 target 0 lun 1
da6: <Generic- Compact Flash 1.01> Removable Direct Access SCSI-0 device
da6: Serial Number 058F63646476
da6: 40.000MB/s transfers
da6: Attempt to query device size failed: NOT READY, Medium not present
da6: quirks=0x2<NO_6_BYTE>
da7 at umass-sim5 bus 5 scbus9 target 0 lun 2
da7: <Generic- SM/xD-Picture 1.02> Removable Direct Access SCSI-0 device
da7: Serial Number 058F63646476
da7: 40.000MB/s transfers
da7: Attempt to query device size failed: NOT READY, Medium not present
da7: quirks=0x2<NO_6_BYTE>
da8 at umass-sim5 bus 5 scbus9 target 0 lun 3
da8: <Generic- MS/MS-Pro 1.03> Removable Direct Access SCSI-0 device
da8: Serial Number 058F63646476
da8: 40.000MB/s transfers
da8: Attempt to query device size failed: NOT READY, Medium not present
da8: quirks=0x2<NO_6_BYTE>
Trying to mount root from ufs:/dev/gpt/Sea1-11 [rw]...
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/34.01, addr 3> on usbus0
ums0: 8 buttons and [XYZT] coordinates ID=0
uhid0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 7> on usbus3
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 done
All buffers synced.
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-STABLE #2: Mon Jan 26 21:18:36 UTC 2015
root at amelia:/usr/obj/usr/src/sys/SANDY10NC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT: running with driver "vga".
CPU: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (3392.37-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1f9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16482471936 (15718 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xfe000000-0xfe3fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
agp0: <SandyBridge desktop GT2+ IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
vgapci0: Boot video device
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe706000-0xfe7063ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
hdac0: <Intel Cougar Point HDA Controller> mem 0xfe700000-0xfe703fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 16 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 8c:89:a5:13:15:54
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <serial bus, FireWire> at device 0.0 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci5: <ACPI PCI bus> on pcib5
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfe500000-0xfe501fff irq 18 at device 0.0 on pci5
xhci0: 32 byte context size.
usbus1 on xhci0
pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci6: <ACPI PCI bus> on pcib6
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfe400000-0xfe401fff irq 19 at device 0.0 on pci6
xhci1: 64 byte context size.
usbus2 on xhci1
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe705000-0xfe7053ff irq 23 at device 29.0 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel Cougar Point SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf0d0-0xf0df,0xf0c0-0xf0cf irq 19 at device 31.2 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
atapci1: <Intel Cougar Point SATA300 controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf070-0xf07f,0xf060-0xf06f irq 19 at device 31.5 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
random: unblocking device.
usbus0: 480Mbps High Speed USB v2.0
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC892 HDA CODEC> at cad 1 on hdac0
hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
pcm1: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0
pcm3: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa0
hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc1
pcm4: <Intel Cougar Point (HDMI/DP 8ch)> at nid 6 on hdaa1
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 5.0Gbps Super Speed USB v3.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <0x1033> at usbus1
uhub1: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen2.1: <0x1912> at usbus2
uhub2: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
usbus3: 480Mbps High Speed USB v2.0
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub1: 4 ports with 4 removable, self powered
uhub2: 8 ports with 8 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <ST4000VN000-1H4168 SC44> ATA-9 SATA 3.x device
ada0: Serial Number Z301KSG0
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: 3815447MB (7814037168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad0
cd0 at ata2 bus 0 scbus2 target 0 lun 0
cd0: <PLEXTOR DVDR PX-L890SA 1.05> Removable CD-ROM SCSI-0 device
cd0: Serial Number 3524332 228111500685
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: cd present [41580 x 2048 byte records]
SMP: AP CPU #1 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #6 Launched!
Timecounter "TSC-low" frequency 1696185308 Hz quality 1000
ugen0.2: <vendor 0x8087> at usbus0
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen3.2: <vendor 0x8087> at usbus3
uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus3
uhub4: 6 ports with 6 removable, self powered
uhub5: 8 ports with 8 removable, self powered
ugen0.3: <Logitech> at usbus0
ugen3.3: <Kingston> at usbus3
umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.00, addr 3> on usbus3
umass0: SCSI over Bulk-Only; quirks = 0xc000
umass0:4:0:-1: Attached to scbus4
da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
da0: <Kingston DataTraveler 2.0 PMAP> Removable Direct Access SCSI-4 device
da0: Serial Number 1C6F654FF86BED11C9060649
da0: 40.000MB/s transfers
da0: 14887MB (30489408 512 byte sectors: 255H 63S/T 1897C)
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
ugen0.4: <JMicron> at usbus0
umass1: <MSC Bulk-Only Transfer> on usbus0
umass1: SCSI over Bulk-Only; quirks = 0x4000
umass1:5:1:-1: Attached to scbus5
da1 at umass-sim1 bus 1 scbus5 target 0 lun 0
da1: <IC35L040 AVVN07-0 > Fixed Direct Access SCSI-2 device
da1: Serial Number 6040A6680750
da1: 40.000MB/s transfers
da1: 39266MB (80418240 512 byte sectors: 255H 63S/T 5005C)
da1: quirks=0x2<NO_6_BYTE>
ugen3.4: <vendor 0x0930> at usbus3
umass2: <vendor 0x0930 USB Flash Memory, class 0/0, rev 2.00/1.10, addr 4> on usbus3
umass2: SCSI over Bulk-Only; quirks = 0xc000
umass2:6:2:-1: Attached to scbus6
da2 at umass-sim2 bus 2 scbus6 target 0 lun 0
da2: < USB Flash Memory 5.00> Removable Direct Access SCSI-0 device
da2: Serial Number 0E7057713281995D
da2: 40.000MB/s transfers
da2: 955MB (1956864 512 byte sectors: 64H 32S/T 955C)
da2: quirks=0x2<NO_6_BYTE>
GEOM: da1s1: invalid disklabel.
GEOM: diskid/DISK-6040A6680750s1: invalid disklabel.
ugen3.5: <Verbatim> at usbus3
umass3: <Verbatim STORE N GO, class 0/0, rev 2.00/1.00, addr 5> on usbus3
umass3: SCSI over Bulk-Only; quirks = 0xc101
umass3:7:3:-1: Attached to scbus7
da3 at umass-sim3 bus 3 scbus7 target 0 lun 0
da3: <Verbatim STORE N GO 2.66> Removable Direct Access SCSI-2 device
da3: Serial Number 78E63C7F2EBB0414
da3: 40.000MB/s transfers
da3: 3823MB (7829504 512 byte sectors: 255H 63S/T 487C)
da3: quirks=0x2<NO_6_BYTE>
Root mount waiting for: usbus3
Root mount waiting for: usbus3
ugen3.6: <vendor 0x13fe> at usbus3
umass4: <vendor 0x13fe USB DISK 2.0, class 0/0, rev 2.00/1.00, addr 6> on usbus3
umass4: SCSI over Bulk-Only; quirks = 0xc100
umass4:8:4:-1: Attached to scbus8
da4 at umass-sim4 bus 4 scbus8 target 0 lun 0
da4: < USB DISK 2.0 PMAP> Removable Direct Access SCSI-4 device
da4: Serial Number 070128EE03B2F983
da4: 40.000MB/s transfers
da4: 7454MB (15265792 512 byte sectors: 255H 63S/T 950C)
da4: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
ugen3.7: <Generic> at usbus3
umass5: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 7> on usbus3
umass5: SCSI over Bulk-Only; quirks = 0x4001
umass5:9:5:-1: Attached to scbus9
da5 at umass-sim5 bus 5 scbus9 target 0 lun 0
da5: <Generic- SD/MMC 1.00> Removable Direct Access SCSI-0 device
da5: Serial Number 058F63646476
da5: 40.000MB/s transfers
da5: Attempt to query device size failed: NOT READY, Medium not present
da5: quirks=0x2<NO_6_BYTE>
da6 at umass-sim5 bus 5 scbus9 target 0 lun 1
da6: <Generic- Compact Flash 1.01> Removable Direct Access SCSI-0 device
da6: Serial Number 058F63646476
da6: 40.000MB/s transfers
da6: Attempt to query device size failed: NOT READY, Medium not present
da6: quirks=0x2<NO_6_BYTE>
da7 at umass-sim5 bus 5 scbus9 target 0 lun 2
da7: <Generic- SM/xD-Picture 1.02> Removable Direct Access SCSI-0 device
da7: Serial Number 058F63646476
da7: 40.000MB/s transfers
da7: Attempt to query device size failed: NOT READY, Medium not present
da7: quirks=0x2<NO_6_BYTE>
da8 at umass-sim5 bus 5 scbus9 target 0 lun 3
da8: <Generic- MS/MS-Pro 1.03> Removable Direct Access SCSI-0 device
da8: Serial Number 058F63646476
da8: 40.000MB/s transfers
da8: Attempt to query device size failed: NOT READY, Medium not present
da8: quirks=0x2<NO_6_BYTE>
Trying to mount root from ufs:/dev/gpt/Sea1-11 [rw]...
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/34.01, addr 3> on usbus0
ums0: 8 buttons and [XYZT] coordinates ID=0
uhid0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 7> on usbus3
re0: link state changed to DOWN
re0: link state changed to UP
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 done
All buffers synced.
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0: Tue Oct 27 18:14:16 UTC 2015
root at amelia:/BETA1/usr/obj.from10/BETA1/usr/src/sys/SANDY11NC amd64
FreeBSD clang version 3.7.0 (tags/RELEASE_370/final 246257) 20150906
WARNING: WITNESS option enabled, expect reduced performance.
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (3392.36-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1f9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16473821184 (15710 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
random: entropy device external interface
wlan: mac acl policy registered
kbd1 at kbdmux0
netmap: loaded module
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xfe000000-0xfe3fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
agp0: <SandyBridge desktop GT2+ IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
vgapci0: Boot video device
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe706000-0xfe7063ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
hdac0: <Intel Cougar Point HDA Controller> mem 0xfe700000-0xfe703fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 16 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 8c:89:a5:13:15:54
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <serial bus, FireWire> at device 0.0 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci5: <ACPI PCI bus> on pcib5
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfe500000-0xfe501fff irq 18 at device 0.0 on pci5
xhci0: 32 bytes context size, 32-bit DMA
usbus1 on xhci0
pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci6: <ACPI PCI bus> on pcib6
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfe400000-0xfe401fff irq 19 at device 0.0 on pci6
xhci1: 64 bytes context size, 32-bit DMA
usbus2 on xhci1
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe705000-0xfe7053ff irq 23 at device 29.0 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel Cougar Point SATA600 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf0d0-0xf0df,0xf0c0-0xf0cf irq 19 at device 31.2 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
atapci1: <Intel Cougar Point SATA300 controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf070-0xf07f,0xf060-0xf06f irq 19 at device 31.5 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
usbus0: 480Mbps High Speed USB v2.0
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
hdacc0: <Realtek ALC892 HDA CODEC> at cad 1 on hdac0
hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
pcm1: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0
pcm3: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa0
hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc1
pcm4: <Intel Cougar Point (HDMI/DP 8ch)> at nid 6 on hdaa1
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 5.0Gbps Super Speed USB v3.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <0x1033> at usbus1
uhub1: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen2.1: <0x1912> at usbus2
uhub2: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
usbus3: 480Mbps High Speed USB v2.0
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub1: 4 ports with 4 removable, self powered
uhub2: 8 ports with 8 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <ST4000VN000-1H4168 SC44> ACS-2 ATA SATA 3.x device
ada0: Serial Number Z301KSG0
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: 3815447MB (7814037168 512 byte sectors)
cd0 at ata2 bus 0 scbus2 target 0 lun 0
cd0: <PLEXTOR DVDR PX-L890SA 1.05> Removable CD-ROM SCSI device
cd0: Serial Number 3524332 228111500685
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
SMP: AP CPU #1 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #7 Launched!
cd0: 81MB (41580 2048 byte sectors)
Timecounter "TSC-low" frequency 1696180208 Hz quality 1000
WARNING: WITNESS option enabled, expect reduced performance.
ugen0.2: <vendor 0x8087> at usbus0
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen3.2: <vendor 0x8087> at usbus3
uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus3
uhub4: 6 ports with 6 removable, self powered
uhub5: 8 ports with 8 removable, self powered
ugen0.3: <Logitech> at usbus0
ugen3.3: <Kingston> at usbus3
umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.00, addr 3> on usbus3
umass0: SCSI over Bulk-Only; quirks = 0xc000
umass0:4:0: Attached to scbus4
da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
da0: <Kingston DataTraveler 2.0 PMAP> Removable Direct Access SPC-2 SCSI device
da0: Serial Number 1C6F654FF86BED11C9060649
da0: 40.000MB/s transfers
da0: 14887MB (30489408 512 byte sectors)
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
ugen0.4: <JMicron> at usbus0
umass1: <MSC Bulk-Only Transfer> on usbus0
umass1: SCSI over Bulk-Only; quirks = 0x4000
umass1:5:1: Attached to scbus5
da1 at umass-sim1 bus 1 scbus5 target 0 lun 0
da1: <IC35L040 AVVN07-0 > Fixed Direct Access SCSI-2 device
da1: Serial Number 6040A6680750
da1: 40.000MB/s transfers
da1: 39266MB (80418240 512 byte sectors)
da1: quirks=0x2<NO_6_BYTE>
GEOM: da1s1: invalid disklabel.
ugen3.4: <vendor 0x0930> at usbus3
umass2: <vendor 0x0930 USB Flash Memory, class 0/0, rev 2.00/1.10, addr 4> on usbus3
umass2: SCSI over Bulk-Only; quirks = 0xc000
umass2:6:2: Attached to scbus6
da2 at umass-sim2 bus 2 scbus6 target 0 lun 0
da2: < USB Flash Memory 5.00> Removable Direct Access SCSI device
da2: Serial Number 0E7057713281995D
da2: 40.000MB/s transfers
da2: 955MB (1956864 512 byte sectors)
da2: quirks=0x2<NO_6_BYTE>
GEOM: diskid/DISK-6040A6680750s1: invalid disklabel.
Root mount waiting for: usbus3
Root mount waiting for: usbus3
ugen3.5: <Verbatim> at usbus3
umass3: <Verbatim STORE N GO, class 0/0, rev 2.00/1.00, addr 5> on usbus3
umass3: SCSI over Bulk-Only; quirks = 0xc101
umass3:7:3: Attached to scbus7
da3 at umass-sim3 bus 3 scbus7 target 0 lun 0
da3: <Verbatim STORE N GO 2.66> Removable Direct Access SCSI-2 device
da3: Serial Number 78E63C7F2EBB0414
da3: 40.000MB/s transfers
da3: 3823MB (7829504 512 byte sectors)
da3: quirks=0x2<NO_6_BYTE>
Root mount waiting for: usbus3
ugen3.6: <vendor 0x13fe> at usbus3
umass4: <vendor 0x13fe USB DISK 2.0, class 0/0, rev 2.00/1.00, addr 6> on usbus3
umass4: SCSI over Bulk-Only; quirks = 0xc100
umass4:8:4: Attached to scbus8
da4 at umass-sim4 bus 4 scbus8 target 0 lun 0
da4: < USB DISK 2.0 PMAP> Removable Direct Access SPC-2 SCSI device
da4: Serial Number 070128EE03B2F983
da4: 40.000MB/s transfers
da4: 7454MB (15265792 512 byte sectors)
da4: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
ugen3.7: <Generic> at usbus3
umass5: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 7> on usbus3
umass5: SCSI over Bulk-Only; quirks = 0x4001
umass5:9:5: Attached to scbus9
da5 at umass-sim5 bus 5 scbus9 target 0 lun 0
da5: <Generic- SD/MMC 1.00> Removable Direct Access SCSI device
da5: Serial Number 058F63646476
da5: 40.000MB/s transfers
da5: Attempt to query device size failed: NOT READY, Medium not present
da5: quirks=0x2<NO_6_BYTE>
da6 at umass-sim5 bus 5 scbus9 target 0 lun 1
da6: <Generic- Compact Flash 1.01> Removable Direct Access SCSI device
da6: Serial Number 058F63646476
da6: 40.000MB/s transfers
da6: Attempt to query device size failed: NOT READY, Medium not present
da6: quirks=0x2<NO_6_BYTE>
da7 at umass-sim5 bus 5 scbus9 target 0 lun 2
da7: <Generic- SM/xD-Picture 1.02> Removable Direct Access SCSI device
da7: Serial Number 058F63646476
da7: 40.000MB/s transfers
da7: Attempt to query device size failed: NOT READY, Medium not present
da7: quirks=0x2<NO_6_BYTE>
da8 at umass-sim5 bus 5 scbus9 target 0 lun 3
da8: <Generic- MS/MS-Pro 1.03> Removable Direct Access SCSI device
da8: Serial Number 058F63646476
da8: 40.000MB/s transfers
da8: Attempt to query device size failed: NOT READY, Medium not present
da8: quirks=0x2<NO_6_BYTE>
Trying to mount root from ufs:/dev/gpt/Sea1-10 [rw]...
random: unblocking device.
re0: link state changed to UP
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/34.01, addr 3> on usbus0
ums0: 8 buttons and [XYZT] coordinates ID=0
uhid0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 7> on usbus3
lock order reversal:
1st 0xfffffe03dca65e20 bufwait (bufwait) @ /BETA1/usr/src/sys/kern/vfs_bio.c:3477
2nd 0xfffff800047a2400 dirhash (dirhash) @ /BETA1/usr/src/sys/ufs/ufs/ufs_dirhash.c:281
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe0461f81670
witness_checkorder() at witness_checkorder+0xe79/frame 0xfffffe0461f816f0
_sx_xlock() at _sx_xlock+0x72/frame 0xfffffe0461f81730
ufsdirhash_remove() at ufsdirhash_remove+0x37/frame 0xfffffe0461f81760
ufs_dirremove() at ufs_dirremove+0x127/frame 0xfffffe0461f817c0
ufs_rmdir() at ufs_rmdir+0xe3/frame 0xfffffe0461f81800
VOP_RMDIR_APV() at VOP_RMDIR_APV+0xf7/frame 0xfffffe0461f81830
kern_rmdirat() at kern_rmdirat+0x1bc/frame 0xfffffe0461f819a0
amd64_syscall() at amd64_syscall+0x2de/frame 0xfffffe0461f81ab0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe0461f81ab0
--- syscall (137, FreeBSD ELF64, sys_rmdir), rip = 0x80089e76a, rsp = 0x7fffffffebb8, rbp = 0x7fffffffec80 ---
info: [drm] Initialized drm 1.1.0 20060810
drmn0: <Intel SandyBridge> on vgapci0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb1 addr 0x0
iic2: <I2C generic I/O> on iicbus2
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb2 addr 0x0
iic4: <I2C generic I/O> on iicbus4
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb3 addr 0x0
iic6: <I2C generic I/O> on iicbus6
iic7: <I2C generic I/O> on iicbus7
iicbus8: <Philips I2C bus> on iicbb4 addr 0x0
iic8: <I2C generic I/O> on iicbus8
iic9: <I2C generic I/O> on iicbus9
iicbus10: <Philips I2C bus> on iicbb5 addr 0x0
iic10: <I2C generic I/O> on iicbus10
iic11: <I2C generic I/O> on iicbus11
iicbus12: <Philips I2C bus> on iicbb6 addr 0x0
iic12: <I2C generic I/O> on iicbus12
iic13: <I2C generic I/O> on iicbus13
info: [drm] MSI enabled 1 message(s)
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
drmn0: taking over the fictitious range 0xc0000000-0xd0000000
info: [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
info: [drm] Connector VGA-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.VGA-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.HDMI-A-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector DP-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DP-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-2: get mode from tunables:
info: [drm] - kern.vt.fb.modes.HDMI-A-2
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector DP-2: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DP-2
info: [drm] - kern.vt.fb.default_mode
fbd0 on drmn0
VT: Replacing driver "vga" with new "fb".
drmn0: No ACPI video bus found
info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
error: [drm:pid1946:gen6_sanitize_pm] *ERROR* Power management discrepancy: GEN6_RP_INTERRUPT_LIMITS expected 1b000000, was 12060000
re0: link state changed to DOWN
re0: link state changed to UP
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 0 done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
All buffers synced.
lock order reversal:
1st 0xfffff8000ac05418 ufs (ufs) @ /BETA1/usr/src/sys/kern/vfs_mount.c:1224
2nd 0xfffff8000abe6b78 devfs (devfs) @ /BETA1/usr/src/sys/ufs/ffs/ffs_vfsops.c:1375
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe045086b530
witness_checkorder() at witness_checkorder+0xe79/frame 0xfffffe045086b5b0
__lockmgr_args() at __lockmgr_args+0xd3b/frame 0xfffffe045086b660
vop_stdlock() at vop_stdlock+0x3c/frame 0xfffffe045086b680
VOP_LOCK1_APV() at VOP_LOCK1_APV+0x100/frame 0xfffffe045086b6b0
_vn_lock() at _vn_lock+0x9a/frame 0xfffffe045086b720
ffs_flushfiles() at ffs_flushfiles+0x11a/frame 0xfffffe045086b790
ffs_unmount() at ffs_unmount+0x97/frame 0xfffffe045086b800
dounmount() at dounmount+0x530/frame 0xfffffe045086b880
vfs_unmountall() at vfs_unmountall+0x6b/frame 0xfffffe045086b8b0
bufshutdown() at bufshutdown+0x3b9/frame 0xfffffe045086b900
kern_reboot() at kern_reboot+0x189/frame 0xfffffe045086b940
sys_reboot() at sys_reboot+0x3e3/frame 0xfffffe045086b9a0
amd64_syscall() at amd64_syscall+0x2de/frame 0xfffffe045086bab0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe045086bab0
--- syscall (55, FreeBSD ELF64, sys_reboot), rip = 0x41062a, rsp = 0x7fffffffe728, rbp = 0x7fffffffe810 ---
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 6af4d3c(drm-i915-update-38): Sat Oct 31 09:18:15 UTC 2015
root at amelia:/freebsd-base-graphics/obj/freebsd-base-graphics/sys/SANDY11NC amd64
FreeBSD clang version 3.7.0 (tags/RELEASE_370/final 246257) 20150906
WARNING: WITNESS option enabled, expect reduced performance.
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (3392.36-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1f9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16473739264 (15710 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
random: entropy device external interface
wlan: mac acl policy registered
kbd1 at kbdmux0
netmap: loaded module
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xfe000000-0xfe3fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
agp0: <SandyBridge desktop GT2+ IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
vgapci0: Boot video device
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe706000-0xfe7063ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
hdac0: <Intel Cougar Point HDA Controller> mem 0xfe700000-0xfe703fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 16 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 8c:89:a5:13:15:54
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <serial bus, FireWire> at device 0.0 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci5: <ACPI PCI bus> on pcib5
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfe500000-0xfe501fff irq 18 at device 0.0 on pci5
xhci0: 32 bytes context size, 32-bit DMA
usbus1 on xhci0
pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci6: <ACPI PCI bus> on pcib6
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfe400000-0xfe401fff irq 19 at device 0.0 on pci6
xhci1: 64 bytes context size, 32-bit DMA
usbus2 on xhci1
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe705000-0xfe7053ff irq 23 at device 29.0 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel Cougar Point SATA600 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf0d0-0xf0df,0xf0c0-0xf0cf irq 19 at device 31.2 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
atapci1: <Intel Cougar Point SATA300 controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf070-0xf07f,0xf060-0xf06f irq 19 at device 31.5 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
usbus0: 480Mbps High Speed USB v2.0
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
hdacc0: <Realtek ALC892 HDA CODEC> at cad 1 on hdac0
hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
pcm1: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0
pcm3: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa0
hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc1
pcm4: <Intel Cougar Point (HDMI/DP 8ch)> at nid 6 on hdaa1
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 5.0Gbps Super Speed USB v3.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <0x1033> at usbus1
uhub1: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen2.1: <0x1912> at usbus2
uhub2: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
usbus3: 480Mbps High Speed USB v2.0
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub1: 4 ports with 4 removable, self powered
uhub2: 8 ports with 8 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <ST4000VN000-1H4168 SC44> ACS-2 ATA SATA 3.x device
ada0: Serial Number Z301KSG0
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: 3815447MB (7814037168 512 byte sectors)
SMP: AP CPU #1 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #4 Launched!
cd0 at ata2 bus 0 scbus2 target 0 lun 0
cd0: <PLEXTOR DVDR PX-L890SA 1.05> Removable CD-ROM SCSI device
cd0: Serial Number 3524332 228111500685
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: 81MB (41580 2048 byte sectors)
Timecounter "TSC-low" frequency 1696180356 Hz quality 1000
WARNING: WITNESS option enabled, expect reduced performance.
ugen0.2: <vendor 0x8087> at usbus0
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen3.2: <vendor 0x8087> at usbus3
uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus3
uhub4: 6 ports with 6 removable, self powered
uhub5: 8 ports with 8 removable, self powered
ugen0.3: <Logitech> at usbus0
ugen3.3: <Kingston> at usbus3
umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.00, addr 3> on usbus3
umass0: SCSI over Bulk-Only; quirks = 0xc000
umass0:4:0: Attached to scbus4
da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
da0: <Kingston DataTraveler 2.0 PMAP> Removable Direct Access SPC-2 SCSI device
da0: Serial Number 1C6F654FF86BED11C9060649
da0: 40.000MB/s transfers
da0: 14887MB (30489408 512 byte sectors)
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
ugen0.4: <JMicron> at usbus0
umass1: <MSC Bulk-Only Transfer> on usbus0
umass1: SCSI over Bulk-Only; quirks = 0x4000
umass1:5:1: Attached to scbus5
da1 at umass-sim1 bus 1 scbus5 target 0 lun 0
da1: <IC35L040 AVVN07-0 > Fixed Direct Access SCSI-2 device
da1: Serial Number 6040A6680750
da1: 40.000MB/s transfers
da1: 39266MB (80418240 512 byte sectors)
da1: quirks=0x2<NO_6_BYTE>
GEOM: da1s1: invalid disklabel.
ugen3.4: <vendor 0x0930> at usbus3
umass2: <vendor 0x0930 USB Flash Memory, class 0/0, rev 2.00/1.10, addr 4> on usbus3
umass2: SCSI over Bulk-Only; quirks = 0xc000
umass2:6:2: Attached to scbus6
da2 at umass-sim2 bus 2 scbus6 target 0 lun 0
da2: < USB Flash Memory 5.00> Removable Direct Access SCSI device
da2: Serial Number 0E7057713281995D
da2: 40.000MB/s transfers
da2: 955MB (1956864 512 byte sectors)
da2: quirks=0x2<NO_6_BYTE>
GEOM: diskid/DISK-6040A6680750s1: invalid disklabel.
Root mount waiting for: usbus3
Root mount waiting for: usbus3
ugen3.5: <Verbatim> at usbus3
umass3: <Verbatim STORE N GO, class 0/0, rev 2.00/1.00, addr 5> on usbus3
umass3: SCSI over Bulk-Only; quirks = 0xc101
umass3:7:3: Attached to scbus7
da3 at umass-sim3 bus 3 scbus7 target 0 lun 0
da3: <Verbatim STORE N GO 2.66> Removable Direct Access SCSI-2 device
da3: Serial Number 78E63C7F2EBB0414
da3: 40.000MB/s transfers
da3: 3823MB (7829504 512 byte sectors)
da3: quirks=0x2<NO_6_BYTE>
Root mount waiting for: usbus3
ugen3.6: <vendor 0x13fe> at usbus3
umass4: <vendor 0x13fe USB DISK 2.0, class 0/0, rev 2.00/1.00, addr 6> on usbus3
umass4: SCSI over Bulk-Only; quirks = 0xc100
umass4:8:4: Attached to scbus8
da4 at umass-sim4 bus 4 scbus8 target 0 lun 0
da4: < USB DISK 2.0 PMAP> Removable Direct Access SPC-2 SCSI device
da4: Serial Number 070128EE03B2F983
da4: 40.000MB/s transfers
da4: 7454MB (15265792 512 byte sectors)
da4: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
Root mount waiting for: usbus3
ugen3.7: <Generic> at usbus3
umass5: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 7> on usbus3
umass5: SCSI over Bulk-Only; quirks = 0x4001
umass5:9:5: Attached to scbus9
Trying to mount root from ufs:/dev/gpt/Sea1-10 [rw]...
da5 at umass-sim5 bus 5 scbus9 target 0 lun 0
da5: <Generic- SD/MMC 1.00> Removable Direct Access SCSI device
da5: Serial Number 058F63646476
da5: 40.000MB/s transfers
da5: Attempt to query device size failed: NOT READY, Medium not present
da5: quirks=0x2<NO_6_BYTE>
da6 at umass-sim5 bus 5 scbus9 target 0 lun 1
da6: <Generic- Compact Flash 1.01> Removable Direct Access SCSI device
da6: Serial Number 058F63646476
da6: 40.000MB/s transfers
da6: Attempt to query device size failed: NOT READY, Medium not present
da6: quirks=0x2<NO_6_BYTE>
da7 at umass-sim5 bus 5 scbus9 target 0 lun 2
da7: <Generic- SM/xD-Picture 1.02> Removable Direct Access SCSI device
da7: Serial Number 058F63646476
da7: 40.000MB/s transfers
da7: Attempt to query device size failed: NOT READY, Medium not present
da7: quirks=0x2<NO_6_BYTE>
da8 at umass-sim5 bus 5 scbus9 target 0 lun 3
da8: <Generic- MS/MS-Pro 1.03> Removable Direct Access SCSI device
da8: Serial Number 058F63646476
da8: 40.000MB/s transfers
da8: Attempt to query device size failed: NOT READY, Medium not present
da8: quirks=0x2<NO_6_BYTE>
random: unblocking device.
re0: link state changed to UP
ums1: <Logitech USB Optical Mouse, class 0/0, rev 2.00/34.01, addr 3> on usbus0
ums1: 8 buttons and [XYZT] coordinates ID=0
uhid0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 7> on usbus3
Tom
More information about the freebsd-x11
mailing list