AW: X won't start with radeon (AMD R9 270X)

[jurgenxiv at t-online.de]

I think drm is loaded automatically by X (or maybe I am interpreting kldstat wrong?).
There is no /dev/dri/card0, I don't know why. Has anyone an Idea what I could try next?

This is the output of
# ls /dev/dri/card*
ls: No match.

# kldstat (right after boot before startx):

Id Refs Address            Size     Name
 1   13 0xffffffff80200000 1755658  kernel
 2    1 0xffffffff81956000 267f48   zfs.ko
 3    2 0xffffffff81bbe000 6780     opensolaris.ko
 4    1 0xffffffff81c11000 357f     ums.ko

# kldstat (after unsucessful startx with radeon):

Id Refs Address            Size     Name
 1   34 0xffffffff80200000 1755658  kernel
 2    1 0xffffffff81956000 267f48   zfs.ko
 3    2 0xffffffff81bbe000 6780     opensolaris.ko
 4    1 0xffffffff81c11000 357f     ums.ko
 5    1 0xffffffff81c15000 11a57a   radeonkms.ko
 6    1 0xffffffff81d30000 47f80    drm2.ko
 7    4 0xffffffff81d78000 1ff2     iicbus.ko
 8    1 0xffffffff81d7a000 1a46     iic.ko
 9    1 0xffffffff81d7c000 1e48     iicbb.ko

Jurgen

-----Original-Nachricht-----
Betreff: Re: X won't start with radeon (AMD R9 270X)
Datum: Mon, 26 Jan 2015 18:14:18 +0100
Von: Gary Jennejohn <gljennjohn at gmail.com>
An: "jurgenxiv at t-online.de" <jurgenxiv at t-online.de>

On Mon, 26 Jan 2015 17:54:24 +0100
"jurgenxiv at t-online.de" <jurgenxiv at t-online.de> wrote:

> Hi, my bad. This time it is attached. :-)
> Thanks for your help, I hope I can use FreeBSD with X soon!
> 
This is the relevant part of the log file:

[    29.898] (--) PCI:*(0:1:0:0) 1002:6810:1462:3036 rev 0, Mem @ 0xd0000000/268435456, 0xfbbc0000/262144, I/O @ 0x0000a000/256, BIOS @ 0x????????/65536
[snip]
[    29.985] (II) [KMS] Kernel modesetting enabled.
[    29.985] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    29.985] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    29.985] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    29.985] (==) RADEON(0): Default visual is TrueColor
[    29.986] (==) RADEON(0): RGB weight 888
[    29.986] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    29.986] (--) RADEON(0): Chipset: "PITCAIRN" (ChipID = 0x6810)
[    30.608] (EE) RADEON(0): [drm] Failed to open DRM device for pci:0000:01:00.0: No such file or directory
[    30.608] (EE) RADEON(0): Kernel modesetting setup failed
[    30.608] (II) UnloadModule: "radeon"
[    30.608] (EE) Screen(s) found, but none have a usable configuration.
[    30.608] (EE) 
Fatal server error:
[    30.608] (EE) no screens found(EE)

drm couldn't attach to the card which resulted in a KMS failure.

No idea why, since I don't use KMS.  Maybe someone with more
knowledge can help you out.

Do you have the drm module loaded?  I couldn't see anything
in the trace which indicates that drm was loaded by X.

-- 
Gary Jennejohn