Issue with DRI after latest update

[xtremyst inxtremo]

I think I solved it, I added WITHOUT_NEW_XORG=yes at my /etc/make.conf,
rebuild xorg-server and the xorg-drivers I needed and DRI is enabled again.
With this configuration xorg-server fails to start some times (after startx
I get a blank screen and my monitor turns off so I have to reset my
computer) but that's an old issue I've been dealing with
from the first day I installed FreeBSD. Anyway, I hope this might help
someone else with the same problem.
Best regards!

On Fri, Oct 3, 2014 at 8:18 PM, xtremyst inxtremo <
xtremyst.in.xtremo at gmail.com> wrote:

> Hello everyone, I'm fairly new to FreeBSD but really excited about this
> OS. I currently have FreeBSD 10 p9 running on my AMD desktop with ATI 2100
> as my graphics card. After the latest update (packages updated were
> xf86-video-ati, xorg-server, dri libGL, dri3proto, libglapi, presentproto,
> linxsshmference, xf86-inpu-mouse and xf86-input-keyboard) DRI is disabled
> and I can no longer use xv as video output driver with mplayer.
>
> Running dmesg gives me some errors:
> drmn0: info: WB enabled
> drmn0: info: fence driver on ring 0 use gpu addr 0x0000000060000000 and
> cpu addr 0x0xfffff80007750000
> info: [drm] Loading RS690/RS740 Microcode
> info: [drm] radeon: ring at 0x0000000060001000
> error: [drm:pid1976:r100_ring_test] *ERROR* radeon: ring test failed
> (scratch(0x15E4)=0xCAFEDEAD)
> error: [drm:pid1976:r100_cp_init] *ERROR* radeon: cp isn't working (-22).
> drmn0: error: failed initializing CP (-22).
> drmn0: error: Disabling GPU acceleration
> error: [drm:pid1976:r100_cp_fini] *ERROR* Wait for CP idle timeout,
> shutting down CP.
> error: [drm:pid1976:r100_cp_disable] *ERROR* Failed to wait GUI idle while
> programming pipes. Bad things might happen.
> info: [drm] radeon: cp finalized
> info: [drm] radeon_device_init: Taking over the fictitious range
> 0xf0000000-0xf8000000
> iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
> iic0: <I2C generic I/O> on iicbus0
> iicbus1: <Philips I2C bus> on iicbb1 addr 0xff
> iic1: <I2C generic I/O> on iicbus1
> iicbus2: <Philips I2C bus> on iicbb2 addr 0xff
> iic2: <I2C generic I/O> on iicbus2
> iicbus3: <Philips I2C bus> on iicbb3 addr 0xff
> iic3: <I2C generic I/O> on iicbus3
> info: [drm] Radeon Display Connectors
> info: [drm] Connector 0:
> info: [drm]   VGA-1
> info: [drm]   DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c
> info: [drm]   Encoders:
> info: [drm]     CRT1: INTERNAL_KLDSCP_DAC1
> error: [drm:pid1976:rs600_irq_set] *ERROR* Can't enable IRQ/MSI because no
> handler is installed
> info: [drm] Initialized radeon 2.29.0 20080528
>
> Also cat /var/log/Xorg.0.log | grep DRI gives me:
> [    75.845] (II) Loading extension DRI2>> DRI
> [    75.903] (II) Loading extension XFree86-DRI
> [    80.166] (II) AIGLX: Screen 0 is not DRI2 capable
> [    80.166] (II) AIGLX: Screen 0 is not DRI capable
> [    80.825] (II) GLX: Initialized DRISWRAST GL provider for screen 0
>
> And finally  cat /var/log/Xorg.1.log | grep DRI:
> (II) Loading extension XFree86-DRI
> (II) Loading extension DRI2
> (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module
> version 1.31.0
> (EE) RADEON(0): [dri] DRIScreenInit failed.  Disabling DRI.
> (II) GLX: Initialized DRISWRAST GL provider for screen 0
>
> Is there anyway to get DRI back? Without it I can't watch any videos
> fullscreen because audio and video get out of sync.
>