Newcons radeonkms - Failed to load firmware "radeonkmsfw_TURKS_PFP"

[Miguel Clara]

Its an HP Pavillion and digging more into it its indeed on of this
"Hybrid Graphichs" latops, so pretty sure it shares the same outputs,
at least for the LCD, (not sure about VGA and HDMI but I would say its
also the same).

I couldn't attach the log at that time because the latpop was stuck on
that screen, all I can do is PowerOff, I even tried SSH, but no joy.

I'm actually running X with MATE now fine but using only the Intel
graphics, only thing I notice is that with KMS I can't change
brightness, but I guess its not yet implemented...

pciconf -lv output for both:

[miguelc at hpbsd]~% pciconf -lv | egrep 'Graphics|Radeon' -B2 -A2
vgapci1 at pci0:0:2:0:    class=0x030000 card=0x1657103c chip=0x01168086
rev=0x09 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '2nd Generation Core Processor Family Integrated
Graphics Controller'
    class      = display
    subclass   = VGA
--
vgapci0 at pci0:1:0:0:    class=0x030000 card=0x1657103c chip=0x67401002
rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD] nee ATI'
    device     = 'Whistler XT [AMD Radeon HD 6700M Series]'
    class      = display
    subclass   = VGA


I also tried to manual kldunload i915kms and then kldload readonkms and got:
Jan 26 00:43:33 hpbsd kernel: info: [drm] radeon_atrm_get_bios: ===> Try ATRM...
Jan 26 00:43:33 hpbsd kernel: info: [drm] radeon_atrm_get_bios:
pci_find_class() found: 0:0:2:0, vendor=8086, device=0116
Jan 26 00:43:33 hpbsd kernel: info: [drm] radeon_atrm_get_bios: Get
ACPI device handle
Jan 26 00:43:33 hpbsd kernel: info: [drm] radeon_atrm_get_bios: Get
ACPI handle for "ATRM"
Jan 26 00:43:33 hpbsd kernel: info: [drm] radeon_atrm_get_bios: Call
radeon_atrm_call()
Jan 26 00:43:33 hpbsd kernel: info: [drm] radeon: 1024M of VRAM memory ready
Jan 26 00:43:33 hpbsd kernel: info: [drm] radeon: 512M of GTT memory ready.
Jan 26 00:43:33 hpbsd kernel: info: [drm] radeon: irq initialized.
Jan 26 00:43:33 hpbsd kernel: info: [drm] radeon_device_init: Taking
over the fictitious range 0xa0000000-0xb0000000
Jan 26 00:43:33 hpbsd kernel: info: [drm] radeon: power management initialized
Jan 26 00:43:33 hpbsd kernel: info: [drm] Initialized radeon 2.29.0 20080528
Jan 26 00:46:29 hpbsd kernel: info: [drm] radeon_atrm_get_bios: ===> Try ATRM...
Jan 26 00:46:29 hpbsd kernel: info: [drm] radeon_atrm_get_bios:
pci_find_class() found: 0:0:2:0, vendor=8086, device=0116
Jan 26 00:46:29 hpbsd kernel: info: [drm] radeon_atrm_get_bios: Get
ACPI device handle
Jan 26 00:46:29 hpbsd kernel: info: [drm] radeon_atrm_get_bios: Get
ACPI handle for "ATRM"
Jan 26 00:46:29 hpbsd kernel: info: [drm] radeon_atrm_get_bios: Call
radeon_atrm_call()
Jan 26 00:46:29 hpbsd kernel: info: [drm] radeon: 1024M of VRAM memory ready
Jan 26 00:46:29 hpbsd kernel: info: [drm] radeon: 512M of GTT memory ready.
Jan 26 00:46:29 hpbsd kernel: info: [drm] radeon: irq initialized.
Jan 26 00:46:29 hpbsd kernel: info: [drm] radeon_device_init: Taking
over the fictitious range 0xa0000000-0xb0000000
Jan 26 00:46:29 hpbsd kernel: info: [drm] radeon: power management initialized
Jan 26 00:46:29 hpbsd kernel: info: [drm] Initialized radeon 2.29.0 20080528


So it seems to work!

But when I tried starx (without the intel dirver and just the ATI card
- see xorg.conf attached files) I got an erro - segmentation fault,
see Xorgradeonkmserro.log

Any other usefull info, as long as I can grab it, I'll be glad to
attach, hoping this helps add +1 card to the supported ones!


btw the brightness problem also happens in a Acer laptop running
FreeBSD 10 with just the Intel driver!

Thanks

On Sun, Jan 26, 2014 at 11:21 PM, Jean-Sébastien Pédron
<dumbbell at freebsd.org> wrote:
> On 26.01.2014 01:17, Mike C. wrote:
>> Just changed and booted again, tried the kldload and got a similar
>> screen freezer.
>>
>> I'll have to attach a screenshot again.
>
> Kernel messages are logged in /var/log/messages by default. Could you
> please post this log file, after removing any informations you don't
> want to share?
>
>> I should also mention this is a laptop with an ati card but it also has
>> Intel integrated graphics (i7 processor).
>> Maybe this is what causes he issue?
>
> Hmmm, do you know if those two cards share a single set of output
> connectors? The technology is called "AMD PowerXpress" (something
> similar to NVIDIA Optimus).
>
> What's the maker and model of your laptop?
>
> --
> Jean-Sébastien Pédron
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: xorg.conf.ati
Type: application/octet-stream
Size: 2494 bytes
Desc: not available
URL: <http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20140127/8eae8509/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: xorg.conf.intel
Type: application/octet-stream
Size: 3492 bytes
Desc: not available
URL: <http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20140127/8eae8509/attachment-0001.obj>