[Call for testers] Update to xorg-server 1.14
Anders Bolt-Evensen
andersbo87 at icloud.com
Tue Dec 16 21:44:24 UTC 2014
Hello!
I tried the new xorg-server 1.14 today (FreeBSD 11-CURRENT on EFI), but
as far as the drivers go, neither Radeon nor Intel drivers work. The
screen freezes right after an attempt to switch from efifb to fb.
info: [drm] Initialized drm 1.1.0 20060810
drmn1: <Intel SandyBridge (M)> on vgapci1
vgapci1: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 268 to local APIC 2 vector 50
vgapci1: using IRQ 268 for MSI
info: [drm] MSI enabled 1 message(s)
info: [drm] AGP at 0xa0000000 256MB
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb1 addr 0x0
iic2: <I2C generic I/O> on iicbus2
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb2 addr 0x0
iic4: <I2C generic I/O> on iicbus4
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb3 addr 0x0
iic6: <I2C generic I/O> on iicbus6
iic7: <I2C generic I/O> on iicbus7
iicbus8: <Philips I2C bus> on iicbb4 addr 0x0
iic8: <I2C generic I/O> on iicbus8
iic9: <I2C generic I/O> on iicbus9
iicbus10: <Philips I2C bus> on iicbb5 addr 0x0
iic10: <I2C generic I/O> on iicbus10
iic11: <I2C generic I/O> on iicbus11
iicbus12: <Philips I2C bus> on iicbb6 addr 0x0
iic12: <I2C generic I/O> on iicbus12
iic13: <I2C generic I/O> on iicbus13
iicbus14: <Philips I2C bus> on iicbb7 addr 0x0
iic14: <I2C generic I/O> on iicbus14
iic15: <I2C generic I/O> on iicbus15
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
info: [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
drmn1: taking over the fictitious range 0xa0000000-0xb0000000
info: [drm] Connector LVDS-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.LVDS-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] cmdline mode for connector LVDS-1 1024x768 at 60Hz
info: [drm] Connector VGA-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.VGA-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] cmdline mode for connector VGA-1 1024x768 at 60Hz
info: [drm] Connector HDMI-A-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.HDMI-A-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] cmdline mode for connector HDMI-A-1 1024x768 at 60Hz
info: [drm] Connector DP-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DP-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] cmdline mode for connector DP-1 1024x768 at 60Hz
fbd1 on drmn1
VT: Replacing driver "efifb" with new "fb".
//
// This is where the screen freezes
//
info: [drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync, +vsync)
info: [drm] Initialized i915 1.6.0 20080730
error: [drm:pid0:intel_lvds_enable] *ERROR* timed out waiting for panel
to power off
drmn0: <Whistler XT [AMD Radeon HD 6700M Series]> on vgapci0
vgapci0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 269 to local APIC 3 vector 50
vgapci0: using IRQ 269 for MSI
info: [drm] MSI enabled 1 message(s)
can't re-use a leaf (debug)!
can't re-use a leaf (notyet)!
can't re-use a leaf (vblank_offdelay)!
can't re-use a leaf (timestamp_precision)!
info: [drm] RADEON_IS_PCIE
info: [drm] initializing kernel modesetting (TURKS 0x1002:0x6740
0x106B:0x00F9).
info: [drm] register mmio base: 0xB0800000
info: [drm] register mmio size: 131072
info: [drm] radeon_atrm_get_bios: ===> Try ATRM...
info: [drm] radeon_atrm_get_bios: pci_find_class() found: 0:0:2:0,
vendor=8086, device=0126
info: [drm] radeon_atrm_get_bios: Get ACPI device handle
info: [drm] radeon_atrm_get_bios: Get ACPI handle for "ATRM"
info: [drm] radeon_atrm_get_bios: Failed to get "ATRM" handle: AE_NOT_FOUND
info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT...
info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table
info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND
info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM...
info: [drm] igp_read_bios_from_vram: VRAM base address: 0x90000000
info: [drm] igp_read_bios_from_vram: Map address: 0xfffff80090000000
(262144 bytes)
info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0xFFFF
info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM...
pcib1: allocated memory range (0xb0820000-0xb083ffff) for rid 30 of vgapci0
vgapci0: Lazy allocation of 0x20000 bytes rid 0x30 type 3 at 0xb0820000
info: [drm] radeon_read_bios: Map address: 0xfffff800b0820000 (131072 bytes)
info: [drm] radeon_read_bios: Incorrect BIOS signature: 0x0000
info: [drm] ni_read_disabled_bios: ===> Try disabled BIOS (ni)...
info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM...
info: [drm] radeon_read_bios: Map address: 0xfffff800b0820000 (131072 bytes)
info: [drm] radeon_read_bios: Incorrect BIOS signature: 0x0000
error: [drm:pid1788:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM
drmn0: error: Fatal error during GPU init
info: [drm] radeon: finishing device.
[TTM] Memory type 2 has not been initialized
device_attach: drmn0 attach returned 22
info: [drm] Changing LVDS panel from (-hsync, +vsync) to (-hsync, -vsync)
error: [drm:pid1788:intel_lvds_enable] *ERROR* timed out waiting for
panel to power off
info: [drm] Changing LVDS panel from (-hsync, -vsync) to (-hsync, +vsync)
error: [drm:pid0:intel_lvds_enable] *ERROR* timed out waiting for panel
to power off
The entire dmesg and Xorg.conf is attached as two text files.
On 03/12/14 00:28, Jean-Sébastien Pédron wrote:
> Hi!
>
> An update to xorg-server is almost ready. We would like people to test
> it and report if there's something wrong with it.
>
> The announcement and instructions are on our blog:
> http://blogs.freebsdish.org/graphics/2014/11/19/xserver-1-14-update-ready/
>
> We learned from the last CFT that you like to have more details about
> what brings a particular update. Therefore, we are more verbose in this
> new post. Please tell us if you're still missing something!
>
> Thank you!
>
-------------- next part --------------
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #18 r275833: Tue Dec 16 20:00:17 CET 2014
root at andersbo-mac.local:/usr/obj/usr/src/sys/KERNEL amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT: running with driver "efifb".
CPU: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz (2394.62-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 10466885632 (9982 MB)
avail memory = 8145473536 (7768 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <APPLE Apple00>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
random: entropy device infrastructure driver
random: selecting highest priority adaptor <Dummy>
kbd0 at kbdmux0
random: SOFT: yarrow init()
random: selecting highest priority adaptor <Yarrow>
acpi0: <APPLE Apple00> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x17, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
unknown: I/O range not supported
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0x90000000-0x9fffffff,0xb0800000-0xb081ffff at device 0.0 on pci1
hdac0: <ATI RV930 HDA Controller> mem 0xb0840000-0xb0843fff at device 0.1 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 1.1 on pci0
pci5: <ACPI PCI bus> on pcib2
vgapci1: <VGA-compatible display> port 0x3000-0x303f mem 0xb0000000-0xb03fffff,0xa0000000-0xafffffff at device 2.0 on pci0
agp0: <SandyBridge mobile GT2+ IG> on vgapci1
agp0: aperture size is 256M, detected 65532k stolen memory
vgapci1: Boot video device
pci0: <simple comms> at device 22.0 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0x3120-0x313f at device 26.0 on pci0
usbus0 on uhci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xb0906c00-0xb0906fff at device 26.7 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac1: <Intel Cougar Point HDA Controller> mem 0xb0900000-0xb0903fff at device 27.0 on pci0
pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib3
bge0: <Broadcom BCM57765 B0, ASIC rev. 0x57785100> mem 0xb0400000-0xb040ffff,0xb0410000-0xb041ffff at device 0.0 on pci2
bge0: CHIP ID 0x57785100; ASIC REV 0x57785; CHIP REV 0x577851; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM57765 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: 3c:07:54:62:13:42
pcib4: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib4
pci3: <network> at device 0.0 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib5
pci4: <serial bus, FireWire> at device 0.0 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci156: <ACPI PCI bus> on pcib6
ath0: <Atheros 5418> mem 0xb4f00000-0xb4f0ffff at device 0.0 on pci156
ath0: [HT] enabling HT modes
ath0: [HT] RTS aggregates limited to 8 KiB
ath0: [HT] 2 RX streams; 2 TX streams
ath0: AR5418 mac 12.10 RF2122 phy 8.1
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00f0
uhci1: <UHCI (generic) USB controller> port 0x30c0-0x30df at device 29.0 on pci0
usbus2 on uhci1
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xb0906800-0xb0906bff at device 29.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port 0x3148-0x314f,0x315c-0x315f,0x3140-0x3147,0x3158-0x315b,0x3060-0x307f mem 0xb0906000-0xb09067ff at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
asmc0: model not recognized
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
usbus0: 12Mbps Full Speed USB v1.0
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
Timecounters tick every 1.000 msec
SUPDRV_IDC_REQ_CONNECT: failed to create session, rc=-2
vboxNetFltInitGlobalsAndIdc failed -2
module_register_init: MOD_LOAD (ng_vboxnetflt, 0xffffffff81c83ff0, 0xffffffff81c0e6e8) error 22
vboxdrv: fAsync=0 offMin=0x508 offMax=0x744
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Cirrus Logic CS4206 HDA CODEC> at cad 0 on hdac1
hdaa1: <Cirrus Logic CS4206 Audio Function Group> at nid 1 on hdacc1
pcm1: <Cirrus Logic CS4206 (Internal Analog 3.1/2.0)> at nid 11,10 and 13 on hdaa1
pcm2: <Cirrus Logic CS4206 (Analog)> at nid 9 and 12 on hdaa1
pcm3: <Cirrus Logic CS4206 (Digital)> at nid 16 and 15 on hdaa1
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <MATSHITA DVD-R UJ-8A8 HB14> Removable CD-ROM SCSI-0 device
cd0: Serial Number D0214970DKVDTL7AN
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray open
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST2000LM003 HN-M201RAD 2BC10001> ATA-8 SATA 3.x device
ada0: Serial Number S321J9AF900994
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
uhub0: 2 ports with 2 removable, self powered
ada0: Previously was known as ad4
random: unblocking device.
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #4 Launched!
Timecounter "TSC-low" frequency 1197308002 Hz quality 1000
uhub2: 2 ports with 2 removable, self powered
GEOM: ada0: enabling Boot Camp
GEOM: diskid/DISK-S321J9AF900994: enabling Boot Camp
Root mount waiting for: usbus3 usbus1
Root mount waiting for: usbus3 usbus1
uhub1: 6 ports with 6 removable, self powered
Root mount waiting for: usbus3 usbus1
ugen1.2: <vendor 0x0424> at usbus1
uhub4: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 2> on usbus1
uhub4: MTT enabled
uhub3: 8 ports with 8 removable, self powered
Root mount waiting for: usbus3 usbus1
uhub4: 4 ports with 2 removable, self powered
ugen3.2: <vendor 0x0424> at usbus3
uhub5: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 2> on usbus3
uhub5: MTT enabled
ugen1.3: <Apple Inc.> at usbus1
uhub6: <Apple Inc. BRCM2070 Hub, class 9/0, rev 2.00/1.00, addr 3> on usbus1
uhub5: 3 ports with 2 removable, self powered
Root mount waiting for: usbus3 usbus1
uhub6: 3 ports with 0 removable, self powered
ugen3.3: <Apple Computer, Inc.> at usbus3
uhid0: <Apple Computer, Inc. IR Receiver, class 0/0, rev 2.00/0.16, addr 3> on usbus3
ugen1.4: <vendor 0x05ac> at usbus1
ukbd0: <vendor 0x05ac product 0x820a, class 0/0, rev 2.00/1.00, addr 4> on usbus1
kbd1 at ukbd0
Root mount waiting for: usbus1
ugen1.5: <vendor 0x05ac> at usbus1
ums0: <vendor 0x05ac product 0x820b, class 0/0, rev 2.00/1.00, addr 5> on usbus1
ums0: 3 buttons and [XY] coordinates ID=2
ugen1.6: <Apple Inc.> at usbus1
Root mount waiting for: usbus1
ugen1.7: <Apple Inc.> at usbus1
ukbd1: <Apple Internal Keyboard> on usbus1
kbd2 at ukbd1
atp0: <Touchpad> on usbus1
ums1: <Touchpad> on usbus1
ums1: 3 buttons and [XY] coordinates ID=2
Root mount waiting for: usbus1
ugen1.8: <Apple Inc.> at usbus1
Trying to mount root from ufs:/dev/ada0p6 [rw]...
Setting hostuuid: db9c5edc-5c58-11e4-9ac8-3c0754621342.
Setting hostid: 0xe9da73f4.
Starting file system checks:
/dev/ada0p6: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0p6: clean, 1431781 free (3901 frags, 178485 blocks, 0.2% fragmentation)
/dev/ada0p8: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0p8: clean, 1003088 free (104 frags, 125373 blocks, 0.0% fragmentation)
/dev/ada0p9: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0p9: clean, 48410552 free (72592 frags, 6042245 blocks, 0.1% fragmentation)
/dev/ada0p10: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0p10: clean, 4924934 free (6206 frags, 614841 blocks, 0.1% fragmentation)
Mounting local file systems:.
Setting hostname: andersbo-mac.local.
Feeding entropy:.
wlan0: bpf attached
wlan0: bpf attached
wlan0: Ethernet address: 00:22:b0:be:65:46
Starting wpa_supplicant.
Starting dhclient.
wlan0: no link ..... got link
DHCPREQUEST on wlan0 to 255.255.255.255 port 67
DHCPREQUEST on wlan0 to 255.255.255.255 port 67
DHCPACK from 10.0.0.138
bound to 10.0.0.75 -- renewal in 43200 seconds.
Starting Network: lo0 bge0 ath0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: lo
bge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=c019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
ether 3c:07:54:62:13:42
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
ether 00:22:b0:be:65:46
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng
status: associated
Starting devd.
Starting Network: bge0.
bge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=c019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
ether 3c:07:54:62:13:42
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
Configuring vt: keymap.
Starting ums0 moused.
Cannot 'start' webcamd. Set webcamd_enable to YES in /etc/rc.conf or use 'onestart' instead of 'start'.
Cannot 'start' webcamd. Set webcamd_enable to YES in /etc/rc.conf or use 'onestart' instead of 'start'.
ubt0: <Apple Inc. Bluetooth USB Host Controller, rev 2.00/0.42, addr 6> on usbus1
Starting atp0 moused.
Starting ums1 moused.
Cannot 'start' webcamd. Set webcamd_enable to YES in /etc/rc.conf or use 'onestart' instead of 'start'.
Cannot 'start' webcamd. Set webcamd_enable to YES in /etc/rc.conf or use 'onestart' instead of 'start'.
Cannot 'start' webcamd. Set webcamd_enable to YES in /etc/rc.conf or use 'onestart' instead of 'start'.
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
/etc/rc.d/bluetooth: ERROR: Unable to setup Bluetooth stack for device ubt0
ugen1.4: <vendor 0x05ac> at usbus1 (disconnected)
ukbd0: at uhub6, port 1, addr 4 (disconnected)
ugen1.5: <vendor 0x05ac> at usbus1 (disconnected)
ums0: at uhub6, port 2, addr 5 (disconnected)
Starting pflogd:
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat /usr/local/lib/compat/pkg /usr/local/lib/ffmpeg0 /usr/local/lib/gcc48 /usr/local/lib/gegl-0.2 /usr/local/lib/graphviz /usr/local/lib/mysql /usr/local/lib/nss /usr/local/lib/pth /usr/local/lib/qt4 /usr/local/lib/virtualbox /usr/local/llvm33/lib /usr/local/llvm34/lib /usr/local/llvm35/lib
32-bit compatibility ldconfig path: /usr/lib32 /usr/local/lib32/compat
/etc/rc: WARNING: Can't load vboxnetflt module.
Starting local_unbound.
Creating and/or trimming log files.
Starting syslogd.
No core dumps found.
Starting casperd.
Clearing /tmp (X related).
Starting dbus.
Starting lpd.
Updating motd:.
Mounting late file systems:.
Starting ntpd.
Starting powerd.
Starting mysql.
Starting default mousedmoused: unable to open /dev/psm0: No such file or directory
.
Starting hald.
Configuring vt: keymap cursor\^[[=0A\^[[=7F\^[[=0G\^[[=0H\^[[=7Ividcontrol: setting cursor type: Inappropriate ioctl for device
blanktime.
Starting gdm.
Starting ffserver.
Starting cupsd.
Shared object "libx264.so.136" not found, required by "libavcodec.so.55"
Starting clamav_clamd.
Starting clamav_freshclam.
Performing sanity check on sshd configuration.
Starting sshd.
Performing sanity check on apache24 configuration:
Syntax OK
Starting apache24.
Starting sendmail_submit.
Starting sendmail_msp_queue.
Starting cron.
Starting background file system checks in 60 seconds.
Tue Dec 16 20:18:38 CET 2014
Dec 16 20:32:30 andersbo-mac login: pam_acct_mgmt(): authentication error
ugen1.4: <SanDisk> at usbus1
umass0: <SanDisk Cruzer Fit, class 0/0, rev 2.00/1.27, addr 4> on usbus1
umass0:3:0: Attached to scbus3
pass3 at umass-sim0 bus 0 scbus3 target 0 lun 0
pass3: <SanDisk Cruzer Fit 1.27> Removable Direct Access SCSI-6 device
pass3: Serial Number 4C530006060403119302
pass3: 40.000MB/s transfers
GEOM: new disk da0
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <SanDisk Cruzer Fit 1.27> Removable Direct Access SCSI-6 device
da0: Serial Number 4C530006060403119302
da0: 40.000MB/s transfers
da0: 30532MB (62530624 512 byte sectors: 255H 63S/T 3892C)
da0: quirks=0x2<NO_6_BYTE>
da0: Delete methods: <NONE(*)>
(da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL not supported.
Dec 16 20:32:41 andersbo-mac login: pam_acct_mgmt(): authentication error
Dec 16 20:32:44 andersbo-mac login: 2 LOGIN FAILURES ON ttyv0
info: [drm] Initialized drm 1.1.0 20060810
drmn1: <Intel SandyBridge (M)> on vgapci1
vgapci1: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 268 to local APIC 2 vector 50
vgapci1: using IRQ 268 for MSI
info: [drm] MSI enabled 1 message(s)
info: [drm] AGP at 0xa0000000 256MB
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb1 addr 0x0
iic2: <I2C generic I/O> on iicbus2
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb2 addr 0x0
iic4: <I2C generic I/O> on iicbus4
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb3 addr 0x0
iic6: <I2C generic I/O> on iicbus6
iic7: <I2C generic I/O> on iicbus7
iicbus8: <Philips I2C bus> on iicbb4 addr 0x0
iic8: <I2C generic I/O> on iicbus8
iic9: <I2C generic I/O> on iicbus9
iicbus10: <Philips I2C bus> on iicbb5 addr 0x0
iic10: <I2C generic I/O> on iicbus10
iic11: <I2C generic I/O> on iicbus11
iicbus12: <Philips I2C bus> on iicbb6 addr 0x0
iic12: <I2C generic I/O> on iicbus12
iic13: <I2C generic I/O> on iicbus13
iicbus14: <Philips I2C bus> on iicbb7 addr 0x0
iic14: <I2C generic I/O> on iicbus14
iic15: <I2C generic I/O> on iicbus15
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
info: [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
drmn1: taking over the fictitious range 0xa0000000-0xb0000000
info: [drm] Connector LVDS-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.LVDS-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] cmdline mode for connector LVDS-1 1024x768 at 60Hz
info: [drm] Connector VGA-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.VGA-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] cmdline mode for connector VGA-1 1024x768 at 60Hz
info: [drm] Connector HDMI-A-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.HDMI-A-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] cmdline mode for connector HDMI-A-1 1024x768 at 60Hz
info: [drm] Connector DP-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DP-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] cmdline mode for connector DP-1 1024x768 at 60Hz
fbd1 on drmn1
VT: Replacing driver "efifb" with new "fb".
info: [drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync, +vsync)
info: [drm] Initialized i915 1.6.0 20080730
error: [drm:pid0:intel_lvds_enable] *ERROR* timed out waiting for panel to power off
drmn0: <Whistler XT [AMD Radeon HD 6700M Series]> on vgapci0
vgapci0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 269 to local APIC 3 vector 50
vgapci0: using IRQ 269 for MSI
info: [drm] MSI enabled 1 message(s)
can't re-use a leaf (debug)!
can't re-use a leaf (notyet)!
can't re-use a leaf (vblank_offdelay)!
can't re-use a leaf (timestamp_precision)!
info: [drm] RADEON_IS_PCIE
info: [drm] initializing kernel modesetting (TURKS 0x1002:0x6740 0x106B:0x00F9).
info: [drm] register mmio base: 0xB0800000
info: [drm] register mmio size: 131072
info: [drm] radeon_atrm_get_bios: ===> Try ATRM...
info: [drm] radeon_atrm_get_bios: pci_find_class() found: 0:0:2:0, vendor=8086, device=0126
info: [drm] radeon_atrm_get_bios: Get ACPI device handle
info: [drm] radeon_atrm_get_bios: Get ACPI handle for "ATRM"
info: [drm] radeon_atrm_get_bios: Failed to get "ATRM" handle: AE_NOT_FOUND
info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT...
info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table
info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND
info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM...
info: [drm] igp_read_bios_from_vram: VRAM base address: 0x90000000
info: [drm] igp_read_bios_from_vram: Map address: 0xfffff80090000000 (262144 bytes)
info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0xFFFF
info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM...
pcib1: allocated memory range (0xb0820000-0xb083ffff) for rid 30 of vgapci0
vgapci0: Lazy allocation of 0x20000 bytes rid 0x30 type 3 at 0xb0820000
info: [drm] radeon_read_bios: Map address: 0xfffff800b0820000 (131072 bytes)
info: [drm] radeon_read_bios: Incorrect BIOS signature: 0x0000
info: [drm] ni_read_disabled_bios: ===> Try disabled BIOS (ni)...
info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM...
info: [drm] radeon_read_bios: Map address: 0xfffff800b0820000 (131072 bytes)
info: [drm] radeon_read_bios: Incorrect BIOS signature: 0x0000
error: [drm:pid1788:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM
drmn0: error: Fatal error during GPU init
info: [drm] radeon: finishing device.
[TTM] Memory type 2 has not been initialized
device_attach: drmn0 attach returned 22
info: [drm] Changing LVDS panel from (-hsync, +vsync) to (-hsync, -vsync)
error: [drm:pid1788:intel_lvds_enable] *ERROR* timed out waiting for panel to power off
info: [drm] Changing LVDS panel from (-hsync, -vsync) to (-hsync, +vsync)
error: [drm:pid0:intel_lvds_enable] *ERROR* timed out waiting for panel to power off
-------------- next part --------------
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" RightOf "Screen1"
Screen 3 "Screen3" RightOf "Screen2"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/local/lib/xorg/modules"
FontPath "/usr/local/lib/X11/fonts/misc/"
FontPath "/usr/local/lib/X11/fonts/TTF/"
FontPath "/usr/local/lib/X11/fonts/OTF/"
FontPath "/usr/local/lib/X11/fonts/Type1/"
FontPath "/usr/local/lib/X11/fonts/100dpi/"
FontPath "/usr/local/lib/X11/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor2"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor3"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "Accel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "ColorTiling" # [<bool>]
#Option "ColorTiling2D" # [<bool>]
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "EXAVSync" # [<bool>]
#Option "EXAPixmaps" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "EnablePageFlip" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
Identifier "Card0"
Driver "radeon"
BusID "PCI:1:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "Backlight" # <str>
#Option "DRI" # <str>
#Option "ColorKey" # <i>
#Option "VideoKey" # <i>
#Option "Tiling" # [<bool>]
#Option "LinearFramebuffer" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
#Option "TripleBuffer" # [<bool>]
#Option "XvPreferOverlay" # [<bool>]
#Option "HotPlug" # [<bool>]
#Option "ReprobeOutputs" # [<bool>]
#Option "XvMC" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "TearFree" # [<bool>]
#Option "PerCrtcPixmaps" # [<bool>]
#Option "FallbackDebug" # [<bool>]
#Option "DebugFlushBatches" # [<bool>]
#Option "DebugFlushCaches" # [<bool>]
#Option "DebugWait" # [<bool>]
#Option "BufferCache" # [<bool>]
Identifier "Card1"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card2"
Driver "vesa"
BusID "PCI:0:2:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card3"
Driver "vesa"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "Card2"
Monitor "Monitor2"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen3"
Device "Card3"
Monitor "Monitor3"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
More information about the freebsd-x11
mailing list