Intel Q35 on FreeBSD 10.0-STABLE X11 fails
Ranjan1018 .
214748mv at gmail.com
Wed Aug 20 07:09:15 UTC 2014
I am not an expert, but probably the output of
# sysctl hw.dri.0.info.i915_error_state
may be useful.
Maurizio
2014-08-18 11:20 GMT+02:00 Schuendehuette, Matthias <
matthias.schuendehuette at siemens.com>:
> Hello,
>
> I tried long time on my own, read a lot of mails, wikis, other hints - my
> FreeBSD 10.0-STABLE workstation still has no working X11, which it had with
> FreeBSD 9.3-STABLE.
>
> I try to supply as much information as needed, more on request.
>
> Due to the long information section my final comment already here:
>
> I hope someone is able to help me here. Nowadays a machine without GUI is
> only for hardcore unix hackers... :-)
>
>
> - Matthias
>
>
> //----------------------------------------------------------------
>
> When starting X11 with 'startx', the following error messages are
> displayed:
>
>
> Kernel:
>
> [probably not X11 related?]
> Aug 18 08:32:25 bsd1dw console-kit-daemon[872]: WARNING: Error waiting for
> native console 1
> activation: Device not configured
>
> [kernel error messages]
> Aug 18 08:32:25 bsd1dw kernel: info: [drm] Initialized drm 1.1.0 20060810
> Aug 18 08:32:25 bsd1dw kernel: drmn0: <Intel Q35> on vgapci0
> Aug 18 08:32:25 bsd1dw kernel: info: [drm] MSI enabled 1 message(s)
> Aug 18 08:32:25 bsd1dw kernel: info: [drm] AGP at 0xe0000000 256MB
> Aug 18 08:32:25 bsd1dw kernel: iicbus0: <Philips I2C bus> on iicbb0 addr
> 0xea
> Aug 18 08:32:25 bsd1dw kernel: iic0: <I2C generic I/O> on iicbus0
> Aug 18 08:32:25 bsd1dw kernel: iic1: <I2C generic I/O> on iicbus1
> Aug 18 08:32:25 bsd1dw kernel: iicbus2: <Philips I2C bus> on iicbb1 addr
> 0xc7
> Aug 18 08:32:25 bsd1dw kernel: iic2: <I2C generic I/O> on iicbus2
> Aug 18 08:32:25 bsd1dw kernel: iic3: <I2C generic I/O> on iicbus3
> Aug 18 08:32:25 bsd1dw kernel: iicbus4: <Philips I2C bus> on iicbb2 addr
> 0xc7
> Aug 18 08:32:25 bsd1dw kernel: iic4: <I2C generic I/O> on iicbus4
> Aug 18 08:32:25 bsd1dw kernel: iic5: <I2C generic I/O> on iicbus5
> Aug 18 08:32:25 bsd1dw kernel: iicbus6: <Philips I2C bus> on iicbb3 addr
> 0xc7
> Aug 18 08:32:25 bsd1dw kernel: iic6: <I2C generic I/O> on iicbus6
> Aug 18 08:32:25 bsd1dw kernel: iic7: <I2C generic I/O> on iicbus7
> Aug 18 08:32:25 bsd1dw kernel: iicbus8: <Philips I2C bus> on iicbb4 addr
> 0xc7
> Aug 18 08:32:25 bsd1dw kernel: iic8: <I2C generic I/O> on iicbus8
> Aug 18 08:32:25 bsd1dw kernel: iic9: <I2C generic I/O> on iicbus9
> Aug 18 08:32:25 bsd1dw kernel: iicbus10: <Philips I2C bus> on iicbb5 addr
> 0xc7
> Aug 18 08:32:25 bsd1dw kernel: iic10: <I2C generic I/O> on iicbus10
> Aug 18 08:32:25 bsd1dw kernel: iic11: <I2C generic I/O> on iicbus11
> Aug 18 08:32:25 bsd1dw kernel: iicbus12: <Philips I2C bus> on iicbb6 addr
> 0xc7
> Aug 18 08:32:25 bsd1dw kernel: iic12: <I2C generic I/O> on iicbus12
> Aug 18 08:32:25 bsd1dw kernel: iic13: <I2C generic I/O> on iicbus13
> Aug 18 08:32:25 bsd1dw kernel: iicbus14: <Philips I2C bus> on iicbb7 addr
> 0xc7
> Aug 18 08:32:25 bsd1dw kernel: iic14: <I2C generic I/O>
> Aug 18 08:32:25 bsd1dw kernel: on iicbus14
> Aug 18 08:32:25 bsd1dw kernel: iic15: <I2C generic I/O> on iicbus15
> Aug 18 08:32:25 bsd1dw kernel: info: [drm] Supports vblank timestamp
> caching Rev 1 (10.10.2010).
> Aug 18 08:32:25 bsd1dw kernel: info: [drm] Driver supports precise vblank
> timestamp query.
> Aug 18 08:32:25 bsd1dw kernel: drmn0: taking over the fictitious range
> 0xe0000000-0xf0000000
> Aug 18 08:32:25 bsd1dw kernel: info: [drm] initialized overlay support
> Aug 18 08:32:25 bsd1dw kernel: info: [drm] Initialized i915 1.6.0 20080730
> Aug 18 08:32:27 bsd1dw kernel: info: [drm] capturing error event; look for
> more information in sys
> ctl hw.dri.0.info.i915_error_state
> Aug 18 08:32:27 bsd1dw kernel: i915: render error detected, EIR: 0x00000010
> Aug 18 08:32:27 bsd1dw kernel: page table error
> Aug 18 08:32:27 bsd1dw kernel: PGTBL_ER: 0x00000002
> Aug 18 08:32:27 bsd1dw kernel: error:
> [drm:pid12:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x0
> 0000010, masking
> Aug 18 08:32:27 bsd1dw kernel: i915: render error detected, EIR: 0x00000010
> Aug 18 08:32:27 bsd1dw kernel: page table error
> Aug 18 08:32:27 bsd1dw kernel: PGTBL_ER: 0x00000002
>
>
>
> Userland:
>
>
> xinit: connection to X server lost
> waiting for X server to shutdown
> Server terminated successfully (0). Closing log file.
>
>
>
> Xorg.0.log:
>
> [ 677.934]
> X.Org X Server 1.12.4
> Release Date: 2012-08-27
> [ 677.934] X Protocol Version 11, Revision 0
> [ 677.934] Build Operating System: FreeBSD 10.0-STABLE i386
> [ 677.934] Current Operating System: FreeBSD bsd1dw.bln3.siemens.de
> 10.0-STABLE FreeBSD 10.0-STABLE #4 r269910: Wed Aug 13 11:10:50 CEST 2014
> root at bsd1dw.bln3.siemens.de:/usr/obj/usr/src/sys/BSD1DW i386
> [ 677.934] Build Date: 07 August 2014 12:54:10PM
> [ 677.934]
> [ 677.934] Current version of pixman: 0.32.4
> [ 677.934] Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> [ 677.934] Markers: (--) probed, (**) from config file, (==) default
> setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> [ 677.934] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 18
> 08:32:24 2014
> [ 677.998] (==) Using config file: "/etc/X11/xorg.conf"
> [ 678.018] (==) ServerLayout "X.org Configured"
> [ 678.018] (**) |-->Screen "Screen0" (0)
> [ 678.018] (**) | |-->Monitor "Monitor0"
> [ 678.019] (**) | |-->Device "Card0"
> [ 678.019] (**) |-->Input Device "Mouse0"
> [ 678.019] (**) |-->Input Device "Keyboard0"
> [ 678.019] (==) Automatically adding devices
> [ 678.019] (==) Automatically enabling devices
> [ 678.063] (WW) The directory "/usr/local/lib/X11/fonts/URW" does not
> exist.
> [ 678.063] Entry deleted from font path.
> [ 678.109] (WW) The directory "/usr/local/share/fonts/amspsfont/type1"
> does not exist.
> [ 678.109] Entry deleted from font path.
> [ 678.109] (WW) The directory "/usr/local/share/fonts/cmpsfont/type1"
> does not exist.
> [ 678.109] Entry deleted from font path.
> [ 678.116] (**) FontPath set to:
> tcp/blnn728x.ww004.siemens.net:7000,
> /usr/local/lib/X11/fonts/TTF,
> /usr/local/lib/X11/fonts/Type1,
> /usr/local/lib/X11/fonts/bitstream-vera,
> /usr/local/lib/X11/fonts/webfonts,
> /usr/local/lib/X11/fonts/100dpi:unscaled,
> /usr/local/lib/X11/fonts/75dpi:unscaled,
> /usr/local/lib/X11/fonts/misc,
> /usr/local/lib/X11/fonts/cyrillic,
> /usr/local/share/fonts,
> /usr/local/lib/X11/fonts/OTF,
> /usr/local/lib/X11/fonts/100dpi/,
> /usr/local/lib/X11/fonts/75dpi/,
> /usr/local/lib/X11/fonts/misc/,
> /usr/local/lib/X11/fonts/TTF/,
> /usr/local/lib/X11/fonts/OTF/,
> /usr/local/lib/X11/fonts/Type1/,
> /usr/local/lib/X11/fonts/100dpi/,
> /usr/local/lib/X11/fonts/75dpi/
> [ 678.116] (**) ModulePath set to "/usr/local/lib/xorg/modules"
> [ 678.116] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse'
> or 'vmmouse' will be disabled.
> [ 678.116] (WW) Disabling Mouse0
> [ 678.116] (WW) Disabling Keyboard0
> [ 678.116] (II) Loader magic: 0x81f1cf8
> [ 678.116] (II) Module ABI versions:
> [ 678.116] X.Org ANSI C Emulation: 0.4
> [ 678.116] X.Org Video Driver: 12.1
> [ 678.116] X.Org XInput driver : 16.0
> [ 678.116] X.Org Server Extension : 6.0
> [ 678.117] (--) PCI:*(0:0:2:0) 8086:29b2:1734:10fc rev 2, Mem @
> 0xd0080000/524288, 0xe0000000/268435456, 0xd0100000/1048576, I/O @
> 0x00001c70/8, BIOS @ 0x????????/65536
> [ 678.117] (--) PCI: (0:0:2:1) 8086:29b3:1734:10fc rev 2, Mem @
> 0x00000000/524288
> [ 678.117] (II) "extmod" will be loaded. This was enabled by default and
> also specified in the config file.
> [ 678.117] (II) "dbe" will be loaded. This was enabled by default and
> also specified in the config file.
> [ 678.117] (II) "glx" will be loaded. This was enabled by default and
> also specified in the config file.
> [ 678.117] (II) "record" will be loaded. This was enabled by default and
> also specified in the config file.
> [ 678.117] (II) "dri" will be loaded. This was enabled by default and
> also specified in the config file.
> [ 678.117] (II) "dri2" will be loaded. This was enabled by default and
> also specified in the config file.
> [ 678.117] (II) LoadModule: "extmod"
> [ 678.164] (II) Loading
> /usr/local/lib/xorg/modules/extensions/libextmod.so
> [ 678.182] (II) Module extmod: vendor="X.Org Foundation"
> [ 678.182] compiled for 1.12.4, module version = 1.0.0
> [ 678.182] Module class: X.Org Server Extension
> [ 678.182] ABI class: X.Org Server Extension, version 6.0
> [ 678.182] (II) Loading extension MIT-SCREEN-SAVER
> [ 678.182] (II) Loading extension XFree86-VidModeExtension
> [ 678.182] (II) Loading extension XFree86-DGA
> [ 678.182] (II) Loading extension DPMS
> [ 678.182] (II) Loading extension XVideo
> [ 678.182] (II) Loading extension XVideo-MotionCompensation
> [ 678.182] (II) Loading extension X-Resource
> [ 678.182] (II) LoadModule: "record"
> [ 678.182] (II) Loading
> /usr/local/lib/xorg/modules/extensions/librecord.so
> [ 678.199] (II) Module record: vendor="X.Org Foundation"
> [ 678.199] compiled for 1.12.4, module version = 1.13.0
> [ 678.199] Module class: X.Org Server Extension
> [ 678.199] ABI class: X.Org Server Extension, version 6.0
> [ 678.199] (II) Loading extension RECORD
> [ 678.199] (II) LoadModule: "dbe"
> [ 678.199] (II) Loading /usr/local/lib/xorg/modules/extensions/libdbe.so
> [ 678.205] (II) Module dbe: vendor="X.Org Foundation"
> [ 678.205] compiled for 1.12.4, module version = 1.0.0
> [ 678.205] Module class: X.Org Server Extension
> [ 678.205] ABI class: X.Org Server Extension, version 6.0
> [ 678.205] (II) Loading extension DOUBLE-BUFFER
> [ 678.205] (II) LoadModule: "glx"
> [ 678.205] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
> [ 678.217] (II) Module glx: vendor="X.Org Foundation"
> [ 678.217] compiled for 1.12.4, module version = 1.0.0
> [ 678.217] ABI class: X.Org Server Extension, version 6.0
> [ 678.218] (==) AIGLX enabled
> [ 678.218] (II) Loading extension GLX
> [ 678.218] (II) LoadModule: "dri"
> [ 678.218] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri.so
> [ 678.243] (II) Module dri: vendor="X.Org Foundation"
> [ 678.243] compiled for 1.12.4, module version = 1.0.0
> [ 678.243] ABI class: X.Org Server Extension, version 6.0
> [ 678.243] (II) Loading extension XFree86-DRI
> [ 678.243] (II) LoadModule: "dri2"
> [ 678.243] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so
> [ 678.244] (II) Module dri2: vendor="X.Org Foundation"
> [ 678.244] compiled for 1.12.4, module version = 1.2.0
> [ 678.244] ABI class: X.Org Server Extension, version 6.0
> [ 678.244] (II) Loading extension DRI2
> [ 678.244] (II) LoadModule: "intel"
> [ 678.244] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
> [ 678.302] (II) Module intel: vendor="X.Org Foundation"
> [ 678.302] compiled for 1.12.4, module version = 2.21.15
> [ 678.302] Module class: X.Org Video Driver
> [ 678.302] ABI class: X.Org Video Driver, version 12.1
> [ 678.302] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
> i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
> 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
> Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35,
> Q33,
> GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
> HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
> HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
> HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
> HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
> [ 678.303] (--) Using syscons driver with X support (version 2.0)
> [ 678.303] (--) using VT number 5
>
> [ 679.208] drmOpenDevice: node name is /dev/dri/card0
> [ 679.208] drmOpenDevice: open result is 10, (OK)
> [ 679.208] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
> [ 679.208] drmOpenDevice: node name is /dev/dri/card0
> [ 679.208] drmOpenDevice: open result is 10, (OK)
> [ 679.208] drmOpenByBusid: drmOpenMinor returns 10
> [ 679.208] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
> [ 679.230] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card
> support
> [ 679.230] drmOpenDevice: node name is /dev/dri/card0
> [ 679.230] drmOpenDevice: open result is 10, (OK)
> [ 679.230] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
> [ 679.230] drmOpenDevice: node name is /dev/dri/card0
> [ 679.230] drmOpenDevice: open result is 10, (OK)
> [ 679.230] drmOpenByBusid: drmOpenMinor returns 10
> [ 679.230] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
> [ 679.230] (**) intel(0): Depth 24, (--) framebuffer bpp 32
> [ 679.230] (==) intel(0): RGB weight 888
> [ 679.230] (==) intel(0): Default visual is TrueColor
> [ 679.230] (--) intel(0): Integrated Graphics Chipset: Intel(R) Q35
> [ 679.230] (**) intel(0): Relaxed fencing enabled
> [ 679.230] (**) intel(0): Wait on SwapBuffers? enabled
> [ 679.230] (**) intel(0): Triple buffering? enabled
> [ 679.230] (**) intel(0): Framebuffer tiled
> [ 679.230] (**) intel(0): Pixmaps tiled
> [ 679.230] (**) intel(0): 3D buffers tiled
> [ 679.230] (**) intel(0): SwapBuffers wait enabled
> [ 679.230] (==) intel(0): video overlay key set to 0x101fe
> [ 679.244] (II) intel(0): Output VGA1 using monitor section Monitor0
> [ 679.423] (II) intel(0): Output DVI1 has no monitor section
> [ 679.437] (II) intel(0): EDID for output VGA1
> [ 679.634] (II) intel(0): EDID for output DVI1
> [ 679.634] (II) intel(0): Manufacturer: FUS Model: 80f Serial#: 5895
> [ 679.634] (II) intel(0): Year: 2012 Week: 29
> [ 679.634] (II) intel(0): EDID Version: 1.3
> [ 679.634] (II) intel(0): Digital Display Input
> [ 679.634] (II) intel(0): Max Image Size [cm]: horiz.: 52 vert.: 32
> [ 679.634] (II) intel(0): Gamma: 2.20
> [ 679.634] (II) intel(0): DPMS capabilities: Off
> [ 679.634] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb
> 4:4:4
> [ 679.634] (II) intel(0): First detailed timing is preferred mode
> [ 679.634] (II) intel(0): redX: 0.640 redY: 0.331 greenX: 0.314
> greenY: 0.618
> [ 679.634] (II) intel(0): blueX: 0.152 blueY: 0.071 whiteX: 0.313
> whiteY: 0.329
> [ 679.634] (II) intel(0): Supported established timings:
> [ 679.634] (II) intel(0): 720x400 at 70Hz
> [ 679.634] (II) intel(0): 640x480 at 60Hz
> [ 679.634] (II) intel(0): 640x480 at 75Hz
> [ 679.634] (II) intel(0): 800x600 at 60Hz
> [ 679.634] (II) intel(0): 800x600 at 75Hz
> [ 679.634] (II) intel(0): 1024x768 at 60Hz
> [ 679.634] (II) intel(0): 1024x768 at 75Hz
> [ 679.634] (II) intel(0): 1280x1024 at 75Hz
> [ 679.634] (II) intel(0): Manufacturer's mask: 0
> [ 679.634] (II) intel(0): Supported standard timings:
> [ 679.634] (II) intel(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid:
> 16553
> [ 679.634] (II) intel(0): #1: hsize: 1680 vsize 1050 refresh: 60 vid:
> 179
> [ 679.634] (II) intel(0): #2: hsize: 1440 vsize 900 refresh: 60 vid:
> 149
> [ 679.634] (II) intel(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid:
> 32897
> [ 679.634] (II) intel(0): #4: hsize: 1600 vsize 900 refresh: 60 vid:
> 49321
> [ 679.634] (II) intel(0): #5: hsize: 1920 vsize 1080 refresh: 60 vid:
> 49361
> [ 679.634] (II) intel(0): Supported detailed timing:
> [ 679.634] (II) intel(0): clock: 154.0 MHz Image Size: 518 x 324 mm
> [ 679.634] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000
> h_blank_end 2080 h_border: 0
> [ 679.634] (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209
> v_blanking: 1235 v_border: 0
> [ 679.634] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H
> max: 82 kHz, PixClock max 175 MHz
> [ 679.634] (II) intel(0): Monitor name: P24W-6 LED
> [ 679.634] (II) intel(0): Serial No: YV5L005895
> [ 679.634] (II) intel(0): EDID (in hex):
> [ 679.634] (II) intel(0): 00ffffffffffff001ab30f0807170000
> [ 679.634] (II) intel(0): 1d160103803420782af915a354509e27
> [ 679.634] (II) intel(0): 125054a54b00a940b30095008180a9c0
> [ 679.634] (II) intel(0): d1c001010101283c80a070b023403020
> [ 679.634] (II) intel(0): 360006442100001a000000fd00384c1e
> [ 679.634] (II) intel(0): 5211000a202020202020000000fc0050
> [ 679.634] (II) intel(0): 3234572d36204c45440a2020000000ff
> [ 679.634] (II) intel(0): 005956354c3030353839350a2020002a
> [ 679.634] (II) intel(0): Printing probed modes for output DVI1
> [ 679.634] (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968
> 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
> [ 679.634] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664
> 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
> [ 679.634] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784
> 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
> [ 679.634] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696
> 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
> [ 679.634] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296
> 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
> [ 679.634] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328
> 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
> [ 679.634] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520
> 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
> [ 679.634] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040
> 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
> [ 679.634] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048
> 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
> [ 679.634] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896
> 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
> [ 679.634] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968
> 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
> [ 679.634] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720
> 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
> [ 679.634] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752
> 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
> [ 679.634] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846
> 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
> [ 679.634] (II) intel(0): Output VGA1 disconnected
> [ 679.634] (II) intel(0): Output DVI1 connected
> [ 679.634] (II) intel(0): Using exact sizes for initial modes
> [ 679.634] (II) intel(0): Output DVI1 using initial mode 1920x1200
> [ 679.634] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless
> otherwise stated.
> [ 679.634] (II) intel(0): Kernel page flipping support detected, enabling
> [ 679.634] (==) intel(0): DPI set to (96, 96)
> [ 679.634] (II) Loading sub module "fb"
> [ 679.634] (II) LoadModule: "fb"
> [ 679.668] (II) Loading /usr/local/lib/xorg/modules/libfb.so
> [ 679.681] (II) Module fb: vendor="X.Org Foundation"
> [ 679.681] compiled for 1.12.4, module version = 1.0.0
> [ 679.681] ABI class: X.Org ANSI C Emulation, version 0.4
> [ 679.681] (II) Loading sub module "dri2"
> [ 679.681] (II) LoadModule: "dri2"
> [ 679.681] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so
> [ 679.681] (II) Module dri2: vendor="X.Org Foundation"
> [ 679.681] compiled for 1.12.4, module version = 1.2.0
> [ 679.681] ABI class: X.Org Server Extension, version 6.0
> [ 679.681] (==) Depth 24 pixmap format is 32 bpp
> [ 679.681] (II) intel(0): [DRI2] Setup complete
> [ 679.681] (II) intel(0): [DRI2] DRI driver: i915
> [ 679.681] (II) intel(0): Allocated new frame buffer 1920x1200 stride
> 8192, tiled
> [ 679.690] (II) UXA(0): Driver registered support for the following
> operations:
> [ 679.690] (II) solid
> [ 679.690] (II) copy
> [ 679.690] (II) composite (RENDER acceleration)
> [ 679.690] (II) put_image
> [ 679.690] (II) get_image
> [ 679.690] (==) intel(0): Backing store disabled
> [ 679.690] (==) intel(0): Silken mouse enabled
> [ 679.691] (II) intel(0): Initializing HW Cursor
> [ 679.691] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
> disabled message.
> [ 679.695] (==) intel(0): DPMS enabled
> [ 679.695] (==) intel(0): Intel XvMC decoder disabled
> [ 679.695] (II) intel(0): Set up textured video
> [ 679.696] (II) intel(0): Set up overlay video
> [ 679.696] (II) intel(0): direct rendering: DRI2 Enabled
> [ 679.910] (--) RandR disabled
> [ 679.910] (II) Initializing built-in extension Generic Event Extension
> [ 679.910] (II) Initializing built-in extension SHAPE
> [ 679.910] (II) Initializing built-in extension MIT-SHM
> [ 679.910] (II) Initializing built-in extension XInputExtension
> [ 679.910] (II) Initializing built-in extension XTEST
> [ 679.910] (II) Initializing built-in extension BIG-REQUESTS
> [ 679.910] (II) Initializing built-in extension SYNC
> [ 679.910] (II) Initializing built-in extension XKEYBOARD
> [ 679.910] (II) Initializing built-in extension XC-MISC
> [ 679.910] (II) Initializing built-in extension XINERAMA
> [ 679.910] (II) Initializing built-in extension XFIXES
> [ 679.910] (II) Initializing built-in extension RENDER
> [ 679.910] (II) Initializing built-in extension RANDR
> [ 679.910] (II) Initializing built-in extension COMPOSITE
> [ 679.910] (II) Initializing built-in extension DAMAGE
> [ 680.093] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
> [ 680.093] (II) AIGLX: enabled GLX_INTEL_swap_event
> [ 680.093] (II) AIGLX: enabled GLX_SGI_swap_control and
> GLX_MESA_swap_control
> [ 680.093] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer
> objects
> [ 680.093] (II) AIGLX: Loaded and initialized i915
> [ 680.093] (II) GLX: Initialized DRI2 GL provider for screen 0
> [ 680.093] (II) intel(0): Setting screen physical size to 508 x 317
> [ 680.619] (II) config/hal: Adding input device USB-PS2 Optical Mouse
> [ 680.619] (II) LoadModule: "mouse"
> [ 680.619] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
> [ 680.663] (II) Module mouse: vendor="X.Org Foundation"
> [ 680.663] compiled for 1.12.4, module version = 1.9.0
> [ 680.663] Module class: X.Org XInput Driver
> [ 680.663] ABI class: X.Org XInput driver, version 16.0
> [ 680.663] (II) Using input driver 'mouse' for 'USB-PS2 Optical Mouse'
> [ 680.663] (**) USB-PS2 Optical Mouse: always reports core events
> [ 680.663] (**) Option "Device" "/dev/sysmouse"
> [ 680.663] (==) USB-PS2 Optical Mouse: Protocol: "Auto"
> [ 680.663] (**) USB-PS2 Optical Mouse: always reports core events
> [ 680.663] (==) USB-PS2 Optical Mouse: Emulate3Buttons, Emulate3Timeout:
> 50
> [ 680.663] (**) USB-PS2 Optical Mouse: ZAxisMapping: buttons 4 and 5
> [ 680.663] (**) USB-PS2 Optical Mouse: Buttons: 5
> [ 680.663] (**) Option "config_info"
> "hal:/org/freedesktop/Hal/devices/usb_device_46d_c045_noserial_if0"
> [ 680.663] (II) XINPUT: Adding extended input device "USB-PS2 Optical
> Mouse" (type: MOUSE, id 6)
> [ 680.663] (**) USB-PS2 Optical Mouse: (accel) keeping acceleration
> scheme 1
> [ 680.663] (**) USB-PS2 Optical Mouse: (accel) acceleration profile 0
> [ 680.663] (**) USB-PS2 Optical Mouse: (accel) acceleration factor: 2.000
> [ 680.663] (**) USB-PS2 Optical Mouse: (accel) acceleration threshold: 4
> [ 680.663] (II) USB-PS2 Optical Mouse: SetupAuto: hw.iftype is 4,
> hw.model is 0
> [ 680.663] (II) USB-PS2 Optical Mouse: SetupAuto: protocol is SysMouse
> [ 680.666] (II) config/hal: Adding input device AT Keyboard
> [ 680.666] (II) LoadModule: "kbd"
> [ 680.666] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
> [ 680.693] (II) Module kbd: vendor="X.Org Foundation"
> [ 680.693] compiled for 1.12.4, module version = 1.8.0
> [ 680.693] Module class: X.Org XInput Driver
> [ 680.693] ABI class: X.Org XInput driver, version 16.0
> [ 680.693] (II) Using input driver 'kbd' for 'AT Keyboard'
> [ 680.693] (**) AT Keyboard: always reports core events
> [ 680.693] (**) AT Keyboard: always reports core events
> [ 680.693] (**) Option "Protocol" "standard"
> [ 680.693] (WW) Option "Device" requires an string value
> [ 680.693] (**) Option "XkbRules" "base"
> [ 680.693] (**) Option "XkbModel" "pc105"
> [ 680.693] (**) Option "XkbLayout" "us"
> [ 680.693] (**) Option "config_info"
> "hal:/org/freedesktop/Hal/devices/atkbd_0"
> [ 680.693] (II) XINPUT: Adding extended input device "AT Keyboard"
> (type: KEYBOARD, id 7)
> [ 680.760] (II) UnloadModule: "mouse"
> [ 680.760] (II) UnloadModule: "kbd"
> [ 680.819] (WW) intel(0): drmDropMaster failed: Unknown error: -22
> [ 680.869] Server terminated successfully (0). Closing log file.
>
>
>
>
> xorg.conf
>
>
> Section "ServerLayout"
> Identifier "X.org Configured"
> Screen 0 "Screen0" 0 0
> InputDevice "Mouse0" "CorePointer"
> InputDevice "Keyboard0" "CoreKeyboard"
> # Option "AllowEmptyInput" "off"
> # Option "AutoAddDevices" "off"
> # Option "AutoEnableDevices" "off"
> # Option "AIGLX" "True"
> EndSection
>
> Section "Files"
> ModulePath "/usr/local/lib/xorg/modules"
> FontPath "tcp/blnn728x.ww004.siemens.net:7000"
> FontPath "/usr/local/lib/X11/fonts/TTF"
> FontPath "/usr/local/lib/X11/fonts/Type1"
> FontPath "/usr/local/lib/X11/fonts/bitstream-vera"
> FontPath "/usr/local/lib/X11/fonts/URW"
> FontPath "/usr/local/lib/X11/fonts/webfonts"
> FontPath "/usr/local/lib/X11/fonts/100dpi:unscaled"
> FontPath "/usr/local/lib/X11/fonts/75dpi:unscaled"
> FontPath "/usr/local/lib/X11/fonts/misc"
> FontPath "/usr/local/lib/X11/fonts/cyrillic"
> FontPath "/usr/local/share/fonts/amspsfont/type1"
> FontPath "/usr/local/share/fonts/cmpsfont/type1"
> FontPath "/usr/local/share/fonts"
> FontPath "/usr/local/lib/X11/fonts/OTF"
> FontPath "/usr/local/lib/X11/fonts/100dpi/"
> FontPath "/usr/local/lib/X11/fonts/75dpi/"
> EndSection
>
> Section "Module"
> Load "extmod"
> Load "record"
> Load "dbe"
> Load "glx"
> Load "dri"
> Load "dri2"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "kbd"
> Option "XkbModel" "pc105"
> Option "XkbLayout" "de"
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> # Option "Protocol" "auto"
> Option "Device" "/dev/sysmouse"
> Option "ZAxisMapping" "4 5"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Monitor Vendor"
> ModelName "Monitor Model"
> EndSection
>
> Section "Device"
> ### Available Driver options are:-
> ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
> ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
> ### [arg]: arg optional
> #Option "NoAccel" # [<bool>]
> #Option "SWcursor" # [<bool>]
> #Option "ColorKey" # <i>
> #Option "CacheLines" # <i>
> #Option "Dac6Bit" # [<bool>]
> #Option "NoDDC" # [<bool>]
> #Option "ShowCache" # [<bool>]
> #Option "XvMCSurfaces" # <i>
> #Option "PageFlip" # [<bool>]
> #Option "AccelMethod" "uxa"
> #Option "DRI" "off" # [<bool>]
> Identifier "Card0"
> Driver "intel"
> ChipSet "Q35"
> VendorName "Intel Corporation"
> BoardName "82Q35 Express Integrated Graphics Controller"
> BusID "PCI:0:2:0"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Card0"
> Monitor "Monitor0"
> DefaultDepth 24
> SubSection "Display"
> Viewport 0 0
> Depth 1
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 4
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 8
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 15
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 16
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 24
> EndSubSection
> EndSection
>
> _______________________________________________
> freebsd-x11 at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe at freebsd.org"
>
More information about the freebsd-x11
mailing list