laptop 9.3 and kms and intel
Zoran Kolic
zkolic at sbb.rs
Fri Aug 8 04:03:35 UTC 2014
I have a laptop with hardware shown in dmesg.
After upgrade to amd64 9.3 I encountered a
problem. At first I used regular repo and got
x not going up. Removing xorg.conf, I succeded
to run x, but had no cursor nor kb input. Cannot
say what driver was used for that. After adding
repo for new_xorg, I upgraded ports again and
got different situation. I could use vesa in
some way. Putting intel drier in conf, it does
not work. Error complains about inconsistence
of modules for abi, mouse and kb.
At the moment I do not know what to do next. To
stick with older repo? To remove some files and
recompile them? I will post more info and answer
more questions when I understand what is needed.
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.3-RELEASE #2: Thu Aug 7 16:11:06 CEST 2014
root at mycenae:/usr/obj/usr/src/sys/NEWKERN amd64
gcc version 4.2.1 20070831 patched [FreeBSD]
CPU: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz (2294.84-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x206a7 Family = 0x6 Model = 0x2a Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1dbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 4006174720 (3820 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-8N >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <LENOVO TP-8N> on motherboard
acpi0: Power Button (fixed)
ACPI Error: No handler for Region [ERAM] (0xfffffe0001a28180) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xfffffe0001a28180) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xfffffe0001a28180) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xfffffe0001a28180) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xfffffe0001a28180) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xfffffe0001a28180) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xfffffe0001a28180) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xfffffe0001a28180) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xfffffe0001a28180) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xfffffe0001a28180) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xfffffe0001a28180) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/uteval-113)
acpi0: reservation of 20000000, 200000 (3) failed
acpi0: reservation of 40000000, 200000 (3) failed
ACPI Error: No handler for Region [ERAM] (0xfffffe0001a28180) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xfffffe0001a28180) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xfffffe0001a28180) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method execution failed [\134_SB_.BAT1._STA] (Node 0xfffffe0001a35a40), AE_NOT_EXIST (20110527/uteval-113)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0
CPU0: local APIC error 0x80
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 3 range: 1001 vs 1000
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
agp0: <SandyBridge mobile GT2 IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
vgapci0: Boot video device
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <serial bus, USB> at device 26.0 (no driver attached)
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
iwn0: <Intel Centrino Wireless-N 1000> mem 0xd1600000-0xd1601fff irq 17 at device 0.0 on pci2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <unknown> at device 0.0 (no driver attached)
pci3: <base peripheral, SD host controller> at device 0.1 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci8: <ACPI PCI bus> on pcib4
alc0: <Atheros AR8151 v2.0 PCIe Gigabit Ethernet> port 0x2000-0x207f mem 0xd0c00000-0xd0c3ffff irq 17 at device 0.0 on pci8
alc0: 11776 Tx FIFO, 12032 Rx FIFO
alc0: Using 1 MSI message(s).
miibus0: <MII bus> on alc0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
alc0: Ethernet address: 04:7d:7b:03:35:d7
pci0: <serial bus, USB> at device 29.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port 0x4088-0x408f,0x4094-0x4097,0x4080-0x4087,0x4090-0x4093,0x4060-0x407f mem 0xd1708000-0xd17087ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
ipfw2 initialized, divert loadable, nat loadable, default to deny, logging disabled
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SAMSUNG SSD 830 Series CXM03B1Q> ATA-9 SATA 3.x device
ada0: Serial Number S0XXNEAC626106
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 61057MB (125045424 512 byte sectors: 1H 63S/T 16383C)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1147420202 Hz quality 1000
Trying to mount root from ufs:/dev/ada0s1a [rw]...
wlan0: Ethernet address: 74:e5:0b:59:2a:cc
wlan0: link state changed to UP
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/mycenae:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 9.1-RELEASE-p17 amd64
Current Operating System: FreeBSD mycenae 9.3-RELEASE FreeBSD 9.3-RELEASE #2: Thu Aug 7 16:11:06 CEST 2014 root at mycenae:/usr/obj/usr/src/sys/NEWKERN amd64
Build Date: 30 July 2014 11:17:45PM
Current version of pixman: 0.32.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 8 05:47:13 2014
(II) Loader magic: 0x7bb1e0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 3
(--) PCI:*(0:0:2:0) 8086:0116:17aa:21ee Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller rev 9, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/65536
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default intel Device 0"
Driver "intel"
EndSection
Section "Screen"
Identifier "Builtin Default intel Screen 0"
Device "Builtin Default intel Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default intel Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/local/lib/X11/fonts/misc/,
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF,
/usr/local/lib/X11/fonts/Type1/,
/usr/local/lib/X11/fonts/100dpi/,
/usr/local/lib/X11/fonts/75dpi/
(==) ModulePath set to "/usr/local/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.7.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.12.4, module version = 2.3.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 12.1
(EE) module ABI major version (12) doesn't match the server's version (6)
(II) UnloadModule: "vesa"
(II) Unloading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
(EE) Failed to load module "vesa" (module requirement mismatch, 0)
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00 at 00:02:0
(EE) No devices detected.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
Best regards
Zoran
More information about the freebsd-x11
mailing list