Problem updating x11-servers/xephyr

[Richard Kuhns]

Hello,

The system in question is running FreeBSD 10.0-STABLE #23 r269379. Ports
are up-to-date as of this morning (2014-08-07).

# make showconfig
===> The following configuration options are available for
xephyr-1.12.4_8,1:
     AIGLX=off: Compile with Accelerated Indirect GLX support
     SUID=off: Install the Xorg server with setuid bit set
====> Options available for the radio CONF: you can only select none or
one of them
     HAL=off: Compile with HAL config support
     DEVD=off: Use devd for autoconfiguration of input devices
(experimental)
===> Use 'make config' to modify these settings
#

When I try 'portmaster x11-servers/xephyr' I get the following result:

===>  Staging for xephyr-1.12.4_8,1
===>   Generating temporary packing list
install  -s -o root -g wheel -m 555
/usr/ports/x11-servers/xephyr/work/xorg-server-1.12.4/hw/kdrive/ephyr/Xephyr
/usr/ports/x11-servers/xephyr/work/stage/usr/local/bin/
install  -o root -g wheel -m 444
/usr/ports/x11-servers/xephyr/work/xorg-server-1.12.4/hw/kdrive/ephyr/Xephyr.1
/usr/ports/x11-servers/xephyr/work/stage/usr/local/man/man1/
install:
/usr/ports/x11-servers/xephyr/work/xorg-server-1.12.4/hw/kdrive/ephyr/Xephyr.1:
No such file or directory
*** Error code 71

Stop.
make[1]: stopped in /usr/ports/x11-servers/xephyr
*** Error code 1

Stop.
make: stopped in /usr/ports/x11-servers/xephyr

===>>> make stage failed for x11-servers/xephyr
===>>> Aborting update


===>>> You can restart from the point of failure with this command line:
       portmaster <flags> x11-servers/xephyr

Thanks for looking at it...
-- 
Richard Kuhns <rjk at wintek.com>     Main Number:      765-742-8428
Wintek Corporation                 Direct:           765-269-8541
427 N 6th Street                   Internet Support: 765-269-8503
Lafayette, IN 47901-2211           Consulting:       765-269-8504