AMD_KMS does not support AMD Radeon HD 6310 Graphics?
Haowu Ge
ghw at 7axu.com
Thu Oct 17 00:17:03 UTC 2013
Thank you, I successfully launched
===log===
[ 62.807] (II) VESA: driver for VESA chipsets: vesa
[ 62.807] (--) Using syscons driver with X support (version 2.0)
[ 62.808] (--) using VT number 9
[ 62.822] (II) [KMS] Kernel modesetting enabled.
[ 62.822] (WW) Falling back to old probe method for vesa
[ 62.822] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card
support
[ 62.822] (II) RADEON(0): Creating default Display subsection in Screen
section
"Builtin Default ati Screen 0" for depth/fbbpp 24/32
[ 62.822] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 62.823] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32
bpp pixmaps)
[ 62.823] (==) RADEON(0): Default visual is TrueColor
[ 62.823] (==) RADEON(0): RGB weight 888
[ 62.823] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 62.823] (--) RADEON(0): Chipset: "AMD Radeon HD 6310 Graphics" (ChipID
= 0x9802)
[ 62.824] drmOpenDevice: node name is /dev/dri/card0
[ 62.824] Failed to change owner or group for file /dev/dri! 2: No such
file or directory
[ 62.825] Failed to change owner or group for file /dev/dri/card0! 2: No
such file or directory
[ 62.825] drmOpenDevice: open result is -1, (No such file or directory)
[ 62.825] Failed to change owner or group for file /dev/dri/card0! 2: No
such file or directory
[ 62.825] drmOpenDevice: open result is -1, (No such file or directory)
[ 62.825] drmOpenDevice: Open failed
[ 65.344] drmOpenByBusid: Searching for BusID pci:0000:00:01.0
[ 65.344] drmOpenDevice: node name is /dev/dri/card0
[ 65.348] drmOpenDevice: open result is 10, (OK)
[ 65.348] drmOpenByBusid: drmOpenMinor returns 10
[ 65.348] drmOpenByBusid: drmGetBusid reports pci:0000:00:01.0
[ 65.348] (II) Loading sub module "dri2"
[ 65.348] (II) LoadModule: "dri2"
[ 65.351] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so
[ 65.351] (II) Module dri2: vendor="X.Org Foundation"
[ 65.351] compiled for 1.12.4, module version = 1.2.0
[ 65.352] ABI class: X.Org Server Extension, version 6.0
[ 65.352] (II) Loading sub module "exa"
[ 65.352] (II) LoadModule: "exa"
[ 65.355] (II) Loading /usr/local/lib/xorg/modules/libexa.so
[ 65.392] (II) Module exa: vendor="X.Org Foundation"
[ 65.392] compiled for 1.12.4, module version = 2.5.0
[ 65.392] ABI class: X.Org Video Driver, version 12.1
[ 65.393] (II) RADEON(0): KMS Color Tiling: enabled
[ 65.393] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 65.393] (II) RADEON(0): KMS Pageflipping: enabled
[ 65.393] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 65.394] (II) RADEON(0): Output LVDS has no monitor section
[ 65.396] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 65.408] (II) RADEON(0): Output VGA-0 has no monitor section
[ 65.408] (II) RADEON(0): EDID for output LVDS
[ 65.409] (II) RADEON(0): Manufacturer: AUO Model: 305c Serial#: 0
[ 65.409] (II) RADEON(0): Year: 2009 Week: 0
[ 65.409] (II) RADEON(0): EDID Version: 1.3
[ 65.409] (II) RADEON(0): Digital Display Input
[ 65.409] (II) RADEON(0): Max Image Size [cm]: horiz.: 26 vert.: 14
[ 65.409] (II) RADEON(0): Gamma: 2.20
[ 65.409] (II) RADEON(0): No DPMS capabilities specified
[ 65.409] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb
4:4:4
[ 65.410] (II) RADEON(0): First detailed timing is preferred mode
[ 65.410] (II) RADEON(0): redX: 0.584 redY: 0.333 greenX: 0.338
greenY: 0.571
[ 65.410] (II) RADEON(0): blueX: 0.158 blueY: 0.133 whiteX: 0.313
whiteY: 0.329
[ 65.410] (II) RADEON(0): Manufacturer's mask: 0
[ 65.410] (II) RADEON(0): Supported detailed timing:
[ 65.410] (II) RADEON(0): clock: 69.3 MHz Image Size: 256 x 144 mm
[ 65.410] (II) RADEON(0): h_active: 1366 h_sync: 1414 h_sync_end 1446
h_blank_end 1456 h_border: 0
[ 65.411] (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777
v_blanking: 793 v_border: 0
[ 65.411] (II) RADEON(0): Unknown vendor-specific block f
--
Regards.
By: Haowu Ge; PGP:8B09D5F7
WWW: https://www.7axu.com/
2013/10/16 Jean-Sébastien Pédron <dumbbell at freebsd.org>
> On 16.10.2013 02:49, Haowu Ge wrote:
> > Hello,
> > My Xorg does not start successfully
>
> Hi!
>
> Could you please check the output of the following command?
> sysctl hw.pci.default_vgapci_unit
>
> If it says "hw.pci.default_vgapci_unit: -1", try to put the following
> line in your /boot/loader.conf:
> hw.pci.default_vgapci_unit="0"
>
> Then reboot and start X again.
>
> Your card is supposed to be supported by FreeBSD 10. But there's a known
> issue with integrated video cards: we seem to have troubles detecting
> that it's the default output during boot.
>
> --
> Jean-Sébastien Pédron
>
>
More information about the freebsd-x11
mailing list