Stop in /usr/ports/x11-servers/xorg-server
iZEN
izen at mail.ru
Wed Jun 13 13:11:27 UTC 2012
% cd /usr/ports/x11-servers/xorg-server/ && make
By default, the X Server installs as a set-user-id root binary. When run by
a normal user, it checks arguments and environment as done in the
x11/wrapper
port before handling them normally. If you are concerned about the security
of this, but still want to run an X Server (for example using xdm/kdm/gdm,
which will still run the server as root), you can cancel the build and set
xorg-server_UNSET=SUID in /etc/make.conf.
===> License check disabled, port has not defined LICENSE
===> Found saved configuration for xorg-server-1.7.7_5,1
===> Extracting for xorg-server-1.7.7_5,1
=> SHA256 Checksum OK for xorg/xserver/xorg-server-1.7.7.tar.bz2.
===> xorg-server-1.7.7_5,1 depends on file: /usr/local/bin/perl5.12.4
- found
===> Patching for xorg-server-1.7.7_5,1
===> xorg-server-1.7.7_5,1 depends on file: /usr/local/bin/perl5.12.4
- found
===> Applying extra patch
/usr/ports/x11-servers/xorg-server/files/extra-dix_events.c
===> Applying extra patch
/usr/ports/x11-servers/xorg-server/files/extra-include_eventstr.h
===> Applying extra patch
/usr/ports/x11-servers/xorg-server/files/extra-patch-os-utils.c
===> Applying FreeBSD patches for xorg-server-1.7.7_5,1
===> xorg-server-1.7.7_5,1 depends on executable: gmake - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/xf86driproto.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/glproto.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/randrproto.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/renderproto.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/fixesproto.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/damageproto.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/dri2proto.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/xcmiscproto.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/xextproto.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/xtrans.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/xf86miscproto.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/xf86vidmodeproto.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/xf86bigfontproto.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/scrnsaverproto.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/bigreqsproto.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/resourceproto.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/fontsproto.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/inputproto.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/xf86dgaproto.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/videoproto.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/compositeproto.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/trapproto.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/recordproto.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/xineramaproto.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/evieproto.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/dri.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/xdmcp.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/x11.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/xkbfile.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/xxf86misc.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/xxf86vm.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/xaw7.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/xmu.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/xt.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/xpm.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/xext.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/xproto.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/xinerama.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/xfont.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/fontenc.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/xkbui.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/pixman-1.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/pciaccess.pc - found
===> xorg-server-1.7.7_5,1 depends on file:
/usr/local/libdata/pkgconfig/pciaccess.pc - found
===> xorg-server-1.7.7_5,1 depends on file: /usr/local/bin/perl5.12.4
- found
===> xorg-server-1.7.7_5,1 depends on shared library: drm - found
===> xorg-server-1.7.7_5,1 depends on shared library: GL.1 - found
===> Configuring for xorg-server-1.7.7_5,1
configure: WARNING: unrecognized options: --without-xmlto,
--disable-docs, --disable-devel-docs
checking for a BSD-compatible install... /usr/bin/install -c -o root -g
wheel
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... ./install-sh -c -d
checking for gawk... gawk
checking whether gmake sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... cc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for cc option to accept ISO C89... none needed
checking for style of include used by gmake... GNU
checking dependency style of cc... gcc3
checking dependency style of cc... gcc3
checking for a BSD-compatible install... /usr/bin/install -c -o root -g
wheel
checking whether ln -s works... yes
checking build system type... amd64-portbld-freebsd9.0
checking host system type... amd64-portbld-freebsd9.0
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by cc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking the maximum length of command line arguments... (cached) 262144
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... no
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from cc object... ok
checking how to run the C preprocessor... cpp
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if cc supports -fno-rtti -fno-exceptions... yes
checking for cc option to produce PIC... -fPIC -DPIC
checking if cc PIC flag -fPIC -DPIC works... yes
checking if cc static flag -static works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.o... (cached) yes
checking whether the cc linker (/usr/bin/ld) supports shared
libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... freebsd9.0 ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for bash... /usr/local/bin/bash
checking if dolt supports this host... yes, replacing libtool
checking whether gmake sets $(MAKE)... (cached) yes
checking for pkg-config... /usr/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for flex... flex
checking lex output file root... lex.yy
checking lex library... -lfl
checking whether yytext is a pointer... yes
checking for bison... bison -y
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking for cpp... /usr/bin/cpp
checking if /usr/bin/cpp requires -undef... yes
checking if /usr/bin/cpp requires -traditional... configure: error:
/usr/bin/cpp does not preserve whitespace with or without -traditional.
I don't know what to do.
===> Script "configure" failed unexpectedly.
Please report the problem to x11 at FreeBSD.org [maintainer] and attach the
"/usr/ports/x11-servers/xorg-server/work/xorg-server-1.7.7/config.log"
including the output of the failure of your make command. Also, it might be
a good idea to provide an overview of all packages installed on your system
(e.g. an `ls /var/db/pkg`).
*** [do-configure] Error code 1
Stop in /usr/ports/x11-servers/xorg-server.
*** [build] Error code 1
Stop in /usr/ports/x11-servers/xorg-server.
%
% cat /etc/make.conf
KERNCONF=ROXY
MAKE_JOBS_NUMBER=6
LOADER_ZFS_SUPPORT=true
LOCALIZED_LANG=ru
WITH_LCD_FILTERING=true
WITH_XFT=true
WITHOUT_TTF_BYTECODE_ENABLED=false
WITH_TTF_BYTECODE_ENABLED=true
WITH_MSWINDOWS_LICENSE=true
WITH_VPX=true
WITH_A4SIZE=true
WITHOUT_DEBUG=true
WITHOUT_NOUVEAU=true
WITHOUT_MYSQL=true
WITHOUT_NAUTILUS=true
# Keep ruby 1.9 as default version.
RUBY_DEFAULT_VER=1.9
# added by use.perl 2012-06-12 20:19:53
PERL_VERSION=5.12.4
% uname -a
FreeBSD roxy.fire 9.0-STABLE FreeBSD 9.0-STABLE #0: Tue Jun 12 18:08:42
VOLT 2012 root at roxy.fire:/usr/obj/usr/src/sys/ROXY amd64
% cat /etc/src.conf
WITHOUT_AMD=true
WITHOUT_ASSERT_DEBUG=true
WITHOUT_ATM=true
WITHOUT_BIND_DNSSEC=true
WITHOUT_BIND_ETC=true
WITHOUT_BIND_LIBS_LWRES=true
WITHOUT_BIND_MTREE=true
WITHOUT_BIND_NAMED=true
WITHOUT_BLUETOOTH=true
WITH_BSD_GREP=true
WITHOUT_BSNMP=true
WITH_CLANG=true
WITH_CLANG_IS_CC=true
WITHOUT_EXAMPLES=true
WITHOUT_FLOPPY=true
WITHOUT_FREEBSD_UPDATE=true
WITHOUT_GAMES=true
WITHOUT_GDB=true
WITHOUT_HTML=true
WITH_IDEA=true
WITHOUT_IPFILTER=true
WITHOUT_IPFW=true
WITHOUT_IPX=true
WITHOUT_IPX_SUPPORT=true
WITHOUT_LIB32=true
WITHOUT_LPR=true
WITHOUT_NDIS=true
WITHOUT_NETGRAPH=true
WITHOUT_NETGRAPH_SUPPORT=true
WITHOUT_PPP=true
WITHOUT_PROFILE=true
WITHOUT_RCS=true
WITHOUT_SENDMAIL=true
WITHOUT_SYSINSTALL=true
WITHOUT_TELNET=true
WITHOUT_WIRELESS=true
WITHOUT_WIRELESS_SUPPORT=true
-------------- next part --------------
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by xorg-server configure 1.7.7, which was
generated by GNU Autoconf 2.63. Invocation command line was
$ ./configure --disable-dmx --disable-xvfb --disable-xnest --without-xmlto --disable-docs --disable-devel-docs --localstatedir=/var --without-dtrace --disable-xephyr --enable-record=yes --with-xkb-path=/usr/local/share/X11/xkb --enable-config-hal=no --enable-aiglx=yes --enable-install-setuid=yes --x-libraries=/usr/local/lib --x-includes=/usr/local/include --prefix=/usr/local --mandir=/usr/local/man --infodir=/usr/local/info/ --build=amd64-portbld-freebsd9.0
## --------- ##
## Platform. ##
## --------- ##
hostname = roxy.fire
uname -m = amd64
uname -r = 9.0-STABLE
uname -s = FreeBSD
uname -v = FreeBSD 9.0-STABLE #0: Tue Jun 12 18:08:42 VOLT 2012 root at roxy.fire:/usr/obj/usr/src/sys/ROXY
/usr/bin/uname -p = amd64
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /sbin
PATH: /bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /usr/games
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /root/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2847: checking for a BSD-compatible install
configure:2915: result: /usr/bin/install -c -o root -g wheel
configure:2926: checking whether build environment is sane
configure:2986: result: yes
configure:3127: checking for a thread-safe mkdir -p
configure:3166: result: ./install-sh -c -d
configure:3179: checking for gawk
configure:3195: found /usr/local/bin/gawk
configure:3206: result: gawk
configure:3217: checking whether gmake sets $(MAKE)
configure:3239: result: yes
configure:3322: checking whether to enable maintainer-specific portions of Makefiles
configure:3331: result: no
configure:3427: checking for gcc
configure:3454: result: cc
configure:3686: checking for C compiler version
configure:3694: cc --version >&5
FreeBSD clang version 3.1 (branches/release_31 156863) 20120523
Target: x86_64-unknown-freebsd9.0
Thread model: posix
configure:3698: $? = 0
configure:3705: cc -v >&5
FreeBSD clang version 3.1 (branches/release_31 156863) 20120523
Target: x86_64-unknown-freebsd9.0
Thread model: posix
configure:3709: $? = 0
configure:3716: cc -V >&5
cc: error: argument to '-V' is missing (expected 1 value)
cc: error: no input files
configure:3720: $? = 1
configure:3743: checking for C compiler default output file name
configure:3765: cc -O2 -pipe -fno-strict-aliasing -rpath=/usr/lib:/usr/local/lib conftest.c >&5
cc: warning: argument unused during compilation: '-rpath=/usr/lib:/usr/local/lib'
configure:3769: $? = 0
configure:3807: result: a.out
configure:3826: checking whether the C compiler works
configure:3836: ./a.out
configure:3840: $? = 0
configure:3859: result: yes
configure:3866: checking whether we are cross compiling
configure:3868: result: no
configure:3871: checking for suffix of executables
configure:3878: cc -o conftest -O2 -pipe -fno-strict-aliasing -rpath=/usr/lib:/usr/local/lib conftest.c >&5
cc: warning: argument unused during compilation: '-rpath=/usr/lib:/usr/local/lib'
configure:3882: $? = 0
configure:3908: result:
configure:3914: checking for suffix of object files
configure:3940: cc -c -O2 -pipe -fno-strict-aliasing conftest.c >&5
configure:3944: $? = 0
configure:3969: result: o
configure:3973: checking whether we are using the GNU C compiler
configure:4002: cc -c -O2 -pipe -fno-strict-aliasing conftest.c >&5
configure:4009: $? = 0
configure:4026: result: yes
configure:4035: checking whether cc accepts -g
configure:4065: cc -c -g conftest.c >&5
configure:4072: $? = 0
configure:4173: result: yes
configure:4190: checking for cc option to accept ISO C89
configure:4264: cc -c -O2 -pipe -fno-strict-aliasing conftest.c >&5
configure:4271: $? = 0
configure:4294: result: none needed
configure:4323: checking for style of include used by gmake
configure:4351: result: GNU
configure:4376: checking dependency style of cc
configure:4486: result: gcc3
configure:4510: checking dependency style of cc
configure:4618: result: gcc3
configure:4647: checking for a BSD-compatible install
configure:4715: result: /usr/bin/install -c -o root -g wheel
configure:4726: checking whether ln -s works
configure:4730: result: yes
configure:4743: checking build system type
configure:4761: result: amd64-portbld-freebsd9.0
configure:4783: checking host system type
configure:4798: result: amd64-portbld-freebsd9.0
configure:5179: checking for a sed that does not truncate output
configure:5245: result: /usr/bin/sed
configure:5263: checking for grep that handles long lines and -e
configure:5323: result: /usr/bin/grep
configure:5328: checking for egrep
configure:5392: result: /usr/bin/grep -E
configure:5397: checking for fgrep
configure:5461: result: /usr/bin/grep -F
configure:5496: checking for ld used by cc
configure:5563: result: /usr/bin/ld
configure:5572: checking if the linker (/usr/bin/ld) is GNU ld
configure:5587: result: yes
configure:5599: checking for BSD- or MS-compatible name lister (nm)
configure:5648: result: /usr/bin/nm -B
configure:5766: checking the name lister (/usr/bin/nm -B) interface
configure:5773: cc -c -O2 -pipe -fno-strict-aliasing conftest.c >&5
configure:5776: /usr/bin/nm -B "conftest.o"
configure:5779: output
0000000000000000 B some_variable
configure:5786: result: BSD nm
configure:5790: checking the maximum length of command line arguments
configure:5910: result: 262144
configure:5927: checking whether the shell understands some XSI constructs
configure:5937: result: yes
configure:5941: checking whether the shell understands "+="
configure:5947: result: no
configure:5982: checking for /usr/bin/ld option to reload object files
configure:5989: result: -r
configure:6058: checking for objdump
configure:6085: result: objdump
configure:6114: checking how to recognize dependent libraries
configure:6310: result: pass_all
configure:6370: checking for ar
configure:6386: found /usr/bin/ar
configure:6397: result: ar
configure:6475: checking for strip
configure:6491: found /usr/bin/strip
configure:6502: result: strip
configure:6574: checking for ranlib
configure:6590: found /usr/bin/ranlib
configure:6601: result: ranlib
configure:6691: checking command to parse /usr/bin/nm -B output from cc object
configure:6809: cc -c -O2 -pipe -fno-strict-aliasing conftest.c >&5
configure:6812: $? = 0
configure:6816: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' \> conftest.nm
configure:6819: $? = 0
configure:6873: cc -o conftest -O2 -pipe -fno-strict-aliasing -rpath=/usr/lib:/usr/local/lib conftest.c conftstm.o >&5
cc: warning: argument unused during compilation: '-rpath=/usr/lib:/usr/local/lib'
configure:6876: $? = 0
configure:6914: result: ok
configure:7781: checking how to run the C preprocessor
configure:7899: result: cpp
configure:7928: cpp conftest.c
configure:7935: $? = 0
configure:7966: cpp conftest.c
conftest.c:10:10: fatal error: 'ac_nonexistent.h' file not found
#include <ac_nonexistent.h>
^
1 error generated.
configure:7973: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "xorg-server"
| #define PACKAGE_TARNAME "xorg-server"
| #define PACKAGE_VERSION "1.7.7"
| #define PACKAGE_STRING "xorg-server 1.7.7"
| #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg"
| #define PACKAGE "xorg-server"
| #define VERSION "1.7.7"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:8013: checking for ANSI C header files
configure:8043: cc -c -O2 -pipe -fno-strict-aliasing conftest.c >&5
configure:8050: $? = 0
configure:8149: cc -o conftest -O2 -pipe -fno-strict-aliasing -rpath=/usr/lib:/usr/local/lib conftest.c >&5
cc: warning: argument unused during compilation: '-rpath=/usr/lib:/usr/local/lib'
configure:8153: $? = 0
configure:8159: ./conftest
configure:8163: $? = 0
configure:8181: result: yes
configure:8205: checking for sys/types.h
configure:8226: cc -c -O2 -pipe -fno-strict-aliasing conftest.c >&5
configure:8233: $? = 0
configure:8250: result: yes
configure:8205: checking for sys/stat.h
configure:8226: cc -c -O2 -pipe -fno-strict-aliasing conftest.c >&5
configure:8233: $? = 0
configure:8250: result: yes
configure:8205: checking for stdlib.h
configure:8226: cc -c -O2 -pipe -fno-strict-aliasing conftest.c >&5
configure:8233: $? = 0
configure:8250: result: yes
configure:8205: checking for string.h
configure:8226: cc -c -O2 -pipe -fno-strict-aliasing conftest.c >&5
configure:8233: $? = 0
configure:8250: result: yes
configure:8205: checking for memory.h
configure:8226: cc -c -O2 -pipe -fno-strict-aliasing conftest.c >&5
configure:8233: $? = 0
configure:8250: result: yes
configure:8205: checking for strings.h
configure:8226: cc -c -O2 -pipe -fno-strict-aliasing conftest.c >&5
configure:8233: $? = 0
configure:8250: result: yes
configure:8205: checking for inttypes.h
configure:8226: cc -c -O2 -pipe -fno-strict-aliasing conftest.c >&5
configure:8233: $? = 0
configure:8250: result: yes
configure:8205: checking for stdint.h
configure:8226: cc -c -O2 -pipe -fno-strict-aliasing conftest.c >&5
configure:8233: $? = 0
configure:8250: result: yes
configure:8205: checking for unistd.h
configure:8226: cc -c -O2 -pipe -fno-strict-aliasing conftest.c >&5
configure:8233: $? = 0
configure:8250: result: yes
configure:8268: checking for dlfcn.h
configure:8289: cc -c -O2 -pipe -fno-strict-aliasing conftest.c >&5
configure:8296: $? = 0
configure:8313: result: yes
configure:8467: checking for objdir
configure:8482: result: .libs
configure:8778: checking if cc supports -fno-rtti -fno-exceptions
configure:8796: cc -c -O2 -pipe -fno-strict-aliasing -fno-rtti -fno-exceptions conftest.c >&5
configure:8800: $? = 0
configure:8813: result: yes
configure:8833: checking for cc option to produce PIC
configure:9105: result: -fPIC -DPIC
configure:9117: checking if cc PIC flag -fPIC -DPIC works
configure:9135: cc -c -O2 -pipe -fno-strict-aliasing -fPIC -DPIC -DPIC conftest.c >&5
configure:9139: $? = 0
configure:9152: result: yes
configure:9176: checking if cc static flag -static works
cc: warning: argument unused during compilation: '-rpath=/usr/lib:/usr/local/lib'
configure:9204: result: yes
configure:9219: checking if cc supports -c -o file.o
configure:9240: cc -c -O2 -pipe -fno-strict-aliasing -o out/conftest2.o conftest.c >&5
configure:9244: $? = 0
configure:9266: result: yes
configure:9274: checking if cc supports -c -o file.o
configure:9321: result: yes
configure:9354: checking whether the cc linker (/usr/bin/ld) supports shared libraries
configure:10428: result: yes
configure:10465: checking whether -lc should be explicitly linked in
configure:10470: cc -c -O2 -pipe -fno-strict-aliasing conftest.c >&5
configure:10473: $? = 0
configure:10488: cc -shared conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| /usr/bin/grep -lc \>/dev/null 2\>\&1
configure:10491: $? = 0
configure:10503: result: no
configure:10667: checking dynamic linker characteristics
configure:11353: result: freebsd9.0 ld.so
configure:11455: checking how to hardcode library paths into programs
configure:11480: result: immediate
configure:12313: checking whether stripping libraries is possible
configure:12318: result: yes
configure:12353: checking if libtool supports shared libraries
configure:12355: result: yes
configure:12358: checking whether to build shared libraries
configure:12379: result: yes
configure:12382: checking whether to build static libraries
configure:12386: result: no
configure:12427: checking for bash
configure:12445: found /usr/local/bin/bash
configure:12457: result: /usr/local/bin/bash
configure:12465: checking if dolt supports this host
configure:12495: result: yes, replacing libtool
configure:12622: checking whether gmake sets $(MAKE)
configure:12644: result: yes
configure:12702: checking for pkg-config
configure:12720: found /usr/local/bin/pkg-config
configure:12732: result: /usr/local/bin/pkg-config
configure:12757: checking pkg-config is at least version 0.9.0
configure:12760: result: yes
configure:12773: checking for flex
configure:12789: found /usr/bin/flex
configure:12800: result: flex
configure:12837: flex conftest.l
configure:12841: $? = 0
configure:12843: checking lex output file root
configure:12859: result: lex.yy
configure:12864: checking lex library
configure:12883: cc -o conftest -O2 -pipe -fno-strict-aliasing -rpath=/usr/lib:/usr/local/lib conftest.c >&5
cc: warning: argument unused during compilation: '-rpath=/usr/lib:/usr/local/lib'
conftest.l:6:20: warning: comparison between pointer and integer ('char *' and 'int')
{ yyless (input () != 0); }
~~~~~~~~~~~~~~~~~^~~~~
conftest.c:138:32: note: expanded from macro 'yyless'
yy_c_buf_p = yy_cp = yy_bp + n - YY_MORE_ADJ; \
~~~~~~~~^~~~~~~~~~~~~~~~~~
conftest.l:6:3: warning: incompatible integer to pointer conversion assigning to 'char *' from 'int' [-Wint-conversion]
{ yyless (input () != 0); }
^~~~~~~~~~~~~~~~~~~~~~
conftest.c:138:22: note: expanded from macro 'yyless'
yy_c_buf_p = yy_cp = yy_bp + n - YY_MORE_ADJ; \
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~
2 warnings generated.
/tmp/conftest-JBdBrs.o: In function `yylex':
conftest.c:(.text+0x3f3): undefined reference to `yywrap'
conftest.c:(.text+0x67c): undefined reference to `yywrap'
/tmp/conftest-JBdBrs.o: In function `main':
conftest.c:(.text+0x109a): undefined reference to `yywrap'
cc: error: linker command failed with exit code 1 (use -v to see invocation)
configure:12890: $? = 1
configure: failed program was:
| /* A lexical scanner generated by flex */
|
| /* Scanner skeleton version:
| * $Header: /home/daffy/u0/vern/flex/RCS/flex.skl,v 2.91 96/09/10 16:58:48 vern Exp $
| * $FreeBSD: src/usr.bin/lex/flex.skl,v 1.13.2.1 2011/09/23 00:51:37 kensmith Exp $
| */
|
| #if defined(__FreeBSD__)
| #include <sys/cdefs.h>
| #else
| #define __unused
| #define __dead2
| #endif
|
| #define FLEX_SCANNER
| #define YY_FLEX_MAJOR_VERSION 2
| #define YY_FLEX_MINOR_VERSION 5
|
| #include <stdio.h>
|
|
| /* cfront 1.2 defines "c_plusplus" instead of "__cplusplus" */
| #ifdef c_plusplus
| #ifndef __cplusplus
| #define __cplusplus
| #endif
| #endif
|
|
| #ifdef __cplusplus
|
| #include <stdlib.h>
| #include <unistd.h>
|
| /* Use prototypes in function declarations. */
| #define YY_USE_PROTOS
|
| /* The "const" storage-class-modifier is valid. */
| #define YY_USE_CONST
|
| #else /* ! __cplusplus */
|
| #if __STDC__
|
| #define YY_USE_PROTOS
| #define YY_USE_CONST
|
| #endif /* __STDC__ */
| #endif /* ! __cplusplus */
|
| #ifdef __TURBOC__
| #pragma warn -rch
| #pragma warn -use
| #include <io.h>
| #include <stdlib.h>
| #define YY_USE_CONST
| #define YY_USE_PROTOS
| #endif
|
| #ifdef YY_USE_CONST
| #define yyconst const
| #else
| #define yyconst
| #endif
|
|
| #ifdef YY_USE_PROTOS
| #define YY_PROTO(proto) proto
| #else
| #define YY_PROTO(proto) ()
| #endif
|
| /* Returned upon end-of-file. */
| #define YY_NULL 0
|
| /* Promotes a possibly negative, possibly signed char to an unsigned
| * integer for use as an array index. If the signed char is negative,
| * we want to instead treat it as an 8-bit unsigned char, hence the
| * double cast.
| */
| #define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
|
| /* Enter a start condition. This macro really ought to take a parameter,
| * but we do it the disgusting crufty way forced on us by the ()-less
| * definition of BEGIN.
| */
| #define BEGIN yy_start = 1 + 2 *
|
| /* Translate the current start state into a value that can be later handed
| * to BEGIN to return to the state. The YYSTATE alias is for lex
| * compatibility.
| */
| #define YY_START ((yy_start - 1) / 2)
| #define YYSTATE YY_START
|
| /* Action number for EOF rule of a given start state. */
| #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
|
| /* Special action meaning "start processing a new file". */
| #define YY_NEW_FILE yyrestart( yyin )
|
| #define YY_END_OF_BUFFER_CHAR 0
|
| /* Size of default input buffer. */
| #define YY_BUF_SIZE 16384
|
| typedef struct yy_buffer_state *YY_BUFFER_STATE;
|
| extern int yyleng;
| extern FILE *yyin, *yyout;
|
| #define EOB_ACT_CONTINUE_SCAN 0
| #define EOB_ACT_END_OF_FILE 1
| #define EOB_ACT_LAST_MATCH 2
|
| /* The funky do-while in the following #define is used to turn the definition
| * int a single C statement (which needs a semi-colon terminator). This
| * avoids problems with code like:
| *
| * if ( condition_holds )
| * yyless( 5 );
| * else
| * do_something_else();
| *
| * Prior to using the do-while the compiler would get upset at the
| * "else" because it interpreted the "if" statement as being all
| * done when it reached the ';' after the yyless() call.
| */
|
| /* Return all but the first 'n' matched characters back to the input stream. */
|
| #define yyless(n) \
| do \
| { \
| /* Undo effects of setting up yytext. */ \
| *yy_cp = yy_hold_char; \
| YY_RESTORE_YY_MORE_OFFSET \
| yy_c_buf_p = yy_cp = yy_bp + n - YY_MORE_ADJ; \
| YY_DO_BEFORE_ACTION; /* set up yytext again */ \
| } \
| while ( 0 )
|
| #define unput(c) yyunput( c, yytext_ptr )
|
| /* The following is because we cannot portably get our hands on size_t
| * (without autoconf's help, which isn't available because we want
| * flex-generated scanners to compile on their own).
| */
| typedef unsigned int yy_size_t;
|
|
| struct yy_buffer_state
| {
| FILE *yy_input_file;
|
| char *yy_ch_buf; /* input buffer */
| char *yy_buf_pos; /* current position in input buffer */
|
| /* Size of input buffer in bytes, not including room for EOB
| * characters.
| */
| yy_size_t yy_buf_size;
|
| /* Number of characters read into yy_ch_buf, not including EOB
| * characters.
| */
| int yy_n_chars;
|
| /* Whether we "own" the buffer - i.e., we know we created it,
| * and can realloc() it to grow it, and should free() it to
| * delete it.
| */
| int yy_is_our_buffer;
|
| /* Whether this is an "interactive" input source; if so, and
| * if we're using stdio for input, then we want to use getc()
| * instead of fread(), to make sure we stop fetching input after
| * each newline.
| */
| int yy_is_interactive;
|
| /* Whether we're considered to be at the beginning of a line.
| * If so, '^' rules will be active on the next match, otherwise
| * not.
| */
| int yy_at_bol;
|
| /* Whether to try to fill the input buffer when we reach the
| * end of it.
| */
| int yy_fill_buffer;
|
| int yy_buffer_status;
| #define YY_BUFFER_NEW 0
| #define YY_BUFFER_NORMAL 1
| /* When an EOF's been seen but there's still some text to process
| * then we mark the buffer as YY_EOF_PENDING, to indicate that we
| * shouldn't try reading from the input source any more. We might
| * still have a bunch of tokens to match, though, because of
| * possible backing-up.
| *
| * When we actually see the EOF, we change the status to "new"
| * (via yyrestart()), so that the user can continue scanning by
| * just pointing yyin at a new input file.
| */
| #define YY_BUFFER_EOF_PENDING 2
| };
|
| static YY_BUFFER_STATE yy_current_buffer = 0;
|
| /* We provide macros for accessing buffer states in case in the
| * future we want to put the buffer states in a more general
| * "scanner state".
| */
| #define YY_CURRENT_BUFFER yy_current_buffer
|
|
| /* yy_hold_char holds the character lost when yytext is formed. */
| static char yy_hold_char;
|
| static int yy_n_chars; /* number of characters read into yy_ch_buf */
|
|
| int yyleng;
|
| /* Points to current character in buffer. */
| static char *yy_c_buf_p = (char *) 0;
| static int yy_init = 1; /* whether we need to initialize */
| static int yy_start = 0; /* start state number */
|
| /* Flag which is used to allow yywrap()'s to do buffer switches
| * instead of setting up a fresh yyin. A bit of a hack ...
| */
| static int yy_did_buffer_switch_on_eof;
|
| void yyrestart YY_PROTO(( FILE *input_file ));
|
| void yy_switch_to_buffer YY_PROTO(( YY_BUFFER_STATE new_buffer ));
| void yy_load_buffer_state YY_PROTO(( void ));
| YY_BUFFER_STATE yy_create_buffer YY_PROTO(( FILE *file, int size ));
| void yy_delete_buffer YY_PROTO(( YY_BUFFER_STATE b ));
| void yy_init_buffer YY_PROTO(( YY_BUFFER_STATE b, FILE *file ));
| void yy_flush_buffer YY_PROTO(( YY_BUFFER_STATE b ));
| #define YY_FLUSH_BUFFER yy_flush_buffer( yy_current_buffer )
|
| YY_BUFFER_STATE yy_scan_buffer YY_PROTO(( char *base, yy_size_t size ));
| YY_BUFFER_STATE yy_scan_string YY_PROTO(( yyconst char *yy_str ));
| YY_BUFFER_STATE yy_scan_bytes YY_PROTO(( yyconst char *bytes, int len ));
|
| static void *yy_flex_alloc YY_PROTO(( yy_size_t ));
| static void *yy_flex_realloc YY_PROTO(( void *, yy_size_t )) __unused;
| static void yy_flex_free YY_PROTO(( void * ));
|
| #define yy_new_buffer yy_create_buffer
|
| #define yy_set_interactive(is_interactive) \
| { \
| if ( ! yy_current_buffer ) \
| yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE ); \
| yy_current_buffer->yy_is_interactive = is_interactive; \
| }
|
| #define yy_set_bol(at_bol) \
| { \
| if ( ! yy_current_buffer ) \
| yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE ); \
| yy_current_buffer->yy_at_bol = at_bol; \
| }
|
| #define YY_AT_BOL() (yy_current_buffer->yy_at_bol)
|
|
| #define YY_USES_REJECT
| typedef unsigned char YY_CHAR;
| FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
| typedef int yy_state_type;
| extern char *yytext;
| #define yytext_ptr yytext
|
| static yy_state_type yy_get_previous_state YY_PROTO(( void ));
| static yy_state_type yy_try_NUL_trans YY_PROTO(( yy_state_type current_state ));
| static int yy_get_next_buffer YY_PROTO(( void ));
| static void yy_fatal_error YY_PROTO(( yyconst char msg[] )) __dead2;
|
| /* Done after the current pattern has been matched and before the
| * corresponding action - sets up yytext.
| */
| #define YY_DO_BEFORE_ACTION \
| yytext_ptr = yy_bp; \
| yytext_ptr -= yy_more_len; \
| yyleng = (int) (yy_cp - yytext_ptr); \
| yy_hold_char = *yy_cp; \
| *yy_cp = '\0'; \
| yy_c_buf_p = yy_cp;
|
| #define YY_NUM_RULES 8
| #define YY_END_OF_BUFFER 9
| static yyconst short int yy_acclist[23] =
| { 0,
| 9, 7, 8, 8, 1, 7, 8, 2, 7, 8,
| 3, 7, 8, 4, 7, 8, 5, 7, 8, 6,
| 7, 8
| } ;
|
| static yyconst short int yy_accept[14] =
| { 0,
| 1, 1, 1, 2, 4, 5, 8, 11, 14, 17,
| 20, 23, 23
| } ;
|
| static yyconst int yy_ec[256] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 2,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 3, 4, 5, 6,
|
| 7, 8, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
|
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1
| } ;
|
| static yyconst int yy_meta[9] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1
| } ;
|
| static yyconst short int yy_base[13] =
| { 0,
| 0, 0, 9, 10, 10, 10, 10, 10, 10, 10,
| 10, 10
| } ;
|
| static yyconst short int yy_def[13] =
| { 0,
| 12, 1, 12, 12, 12, 12, 12, 12, 12, 12,
| 12, 0
| } ;
|
| static yyconst short int yy_nxt[19] =
| { 0,
| 4, 5, 6, 7, 8, 9, 10, 11, 12, 3,
| 12, 12, 12, 12, 12, 12, 12, 12
| } ;
|
| static yyconst short int yy_chk[19] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1, 3, 12,
| 12, 12, 12, 12, 12, 12, 12, 12
| } ;
|
| static yy_state_type yy_state_buf[YY_BUF_SIZE + 2], *yy_state_ptr;
| static char *yy_full_match;
| static int yy_lp;
| #define REJECT \
| { \
| *yy_cp = yy_hold_char; /* undo effects of setting up yytext */ \
| yy_cp = yy_full_match; /* restore poss. backed-over text */ \
| ++yy_lp; \
| goto find_rule; \
| }
| static int yy_more_flag = 0;
| static int yy_more_len = 0;
| #define yymore() (yy_more_flag = 1)
| #define YY_MORE_ADJ yy_more_len
| #define YY_RESTORE_YY_MORE_OFFSET
| char *yytext;
| #line 1 "conftest.l"
| #define INITIAL 0
| #line 391 "lex.yy.c"
|
| /* Macros after this point can all be overridden by user definitions in
| * section 1.
| */
|
| #ifndef YY_SKIP_YYWRAP
| #ifdef __cplusplus
| extern "C" int yywrap YY_PROTO(( void ));
| #else
| extern int yywrap YY_PROTO(( void ));
| #endif
| #endif
|
| #ifndef YY_NO_UNPUT
| static void yyunput YY_PROTO(( int c, char *buf_ptr ));
| #endif
|
| #ifndef yytext_ptr
| static void yy_flex_strncpy YY_PROTO(( char *, yyconst char *, int ));
| #endif
|
| #ifdef YY_NEED_STRLEN
| static int yy_flex_strlen YY_PROTO(( yyconst char * ));
| #endif
|
| #ifndef YY_NO_INPUT
| #ifdef __cplusplus
| static int yyinput YY_PROTO(( void ));
| #else
| static int input YY_PROTO(( void ));
| #endif
| #endif
|
| #if YY_STACK_USED
| static int yy_start_stack_ptr = 0;
| static int yy_start_stack_depth = 0;
| static int *yy_start_stack = 0;
| #ifndef YY_NO_PUSH_STATE
| static void yy_push_state YY_PROTO(( int new_state ));
| #endif
| #ifndef YY_NO_POP_STATE
| static void yy_pop_state YY_PROTO(( void ));
| #endif
| #ifndef YY_NO_TOP_STATE
| static int yy_top_state YY_PROTO(( void ));
| #endif
|
| #else
| #define YY_NO_PUSH_STATE 1
| #define YY_NO_POP_STATE 1
| #define YY_NO_TOP_STATE 1
| #endif
|
| #ifdef YY_MALLOC_DECL
| YY_MALLOC_DECL
| #else
| #if __STDC__
| #ifndef __cplusplus
| #include <stdlib.h>
| #endif
| #else
| /* Just try to get by without declaring the routines. This will fail
| * miserably on non-ANSI systems for which sizeof(size_t) != sizeof(int)
| * or sizeof(void*) != sizeof(int).
| */
| #endif
| #endif
|
| /* Amount of stuff to slurp up with each read. */
| #ifndef YY_READ_BUF_SIZE
| #define YY_READ_BUF_SIZE 8192
| #endif
|
| /* Copy whatever the last rule matched to the standard output. */
|
| #ifndef ECHO
| /* This used to be an fputs(), but since the string might contain NUL's,
| * we now use fwrite().
| */
| #define ECHO (void) fwrite( yytext, yyleng, 1, yyout )
| #endif
|
| /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
| * is returned in "result".
| */
| #ifndef YY_INPUT
| #define YY_INPUT(buf,result,max_size) \
| if ( yy_current_buffer->yy_is_interactive ) \
| { \
| int c = '*', n; \
| for ( n = 0; n < max_size && \
| (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
| buf[n] = (char) c; \
| if ( c == '\n' ) \
| buf[n++] = (char) c; \
| if ( c == EOF && ferror( yyin ) ) \
| YY_FATAL_ERROR( "input in flex scanner failed" ); \
| result = n; \
| } \
| else if ( ((result = fread( buf, 1, max_size, yyin )) == 0) \
| && ferror( yyin ) ) \
| YY_FATAL_ERROR( "input in flex scanner failed" );
| #endif
|
| /* No semi-colon after return; correct usage is to write "yyterminate();" -
| * we don't want an extra ';' after the "return" because that will cause
| * some compilers to complain about unreachable statements.
| */
| #ifndef yyterminate
| #define yyterminate() return YY_NULL
| #endif
|
| /* Number of entries by which start-condition stack grows. */
| #ifndef YY_START_STACK_INCR
| #define YY_START_STACK_INCR 25
| #endif
|
| /* Report a fatal error. */
| #ifndef YY_FATAL_ERROR
| #define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
| #endif
|
| /* Default declaration of generated scanner - a define so the user can
| * easily add parameters.
| */
| #ifndef YY_DECL
| #define YY_DECL int yylex YY_PROTO(( void ))
| #endif
|
| /* Code executed at the beginning of each rule, after yytext and yyleng
| * have been set up.
| */
| #ifndef YY_USER_ACTION
| #define YY_USER_ACTION
| #endif
|
| /* Code executed at the end of each rule. */
| #ifndef YY_BREAK
| #define YY_BREAK break;
| #endif
|
| #define YY_RULE_SETUP \
| YY_USER_ACTION
|
| YY_DECL
| {
| yy_state_type yy_current_state;
| char *yy_cp, *yy_bp;
| int yy_act;
|
| #line 1 "conftest.l"
|
| #line 544 "lex.yy.c"
|
| if ( yy_init )
| {
| yy_init = 0;
|
| #ifdef YY_USER_INIT
| YY_USER_INIT;
| #endif
|
| if ( ! yy_start )
| yy_start = 1; /* first start state */
|
| if ( ! yyin )
| yyin = stdin;
|
| if ( ! yyout )
| yyout = stdout;
|
| if ( ! yy_current_buffer )
| yy_current_buffer =
| yy_create_buffer( yyin, YY_BUF_SIZE );
|
| yy_load_buffer_state();
| }
|
| while ( 1 ) /* loops until end-of-file is reached */
| {
| yy_more_len = 0;
| if ( yy_more_flag )
| {
| yy_more_len = yy_c_buf_p - yytext_ptr;
| yy_more_flag = 0;
| }
| yy_cp = yy_c_buf_p;
|
| /* Support of yytext. */
| *yy_cp = yy_hold_char;
|
| /* yy_bp points to the position in yy_ch_buf of the start of
| * the current run.
| */
| yy_bp = yy_cp;
|
| yy_current_state = yy_start;
| yy_state_ptr = yy_state_buf;
| *yy_state_ptr++ = yy_current_state;
| yy_match:
| do
| {
| YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[(unsigned int) yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| *yy_state_ptr++ = yy_current_state;
| ++yy_cp;
| }
| while ( yy_base[yy_current_state] != 10 );
|
| yy_find_action:
| yy_current_state = *--yy_state_ptr;
| yy_lp = yy_accept[yy_current_state];
| goto find_rule; /* avoid `defined but not used' warning */
| find_rule: /* we branch to this label when backing up */
| for ( ; ; ) /* until we find what rule we matched */
| {
| if ( yy_lp && yy_lp < yy_accept[yy_current_state + 1] )
| {
| yy_act = yy_acclist[yy_lp];
| {
| yy_full_match = yy_cp;
| break;
| }
| }
| --yy_cp;
| yy_current_state = *--yy_state_ptr;
| yy_lp = yy_accept[yy_current_state];
| }
|
| YY_DO_BEFORE_ACTION;
|
|
| do_action: /* This label is used only to access EOF actions. */
|
|
| switch ( yy_act )
| { /* beginning of action switch */
| case 1:
| YY_RULE_SETUP
| #line 2 "conftest.l"
| { ECHO; }
| YY_BREAK
| case 2:
| YY_RULE_SETUP
| #line 3 "conftest.l"
| { REJECT; }
| YY_BREAK
| case 3:
| YY_RULE_SETUP
| #line 4 "conftest.l"
| { yymore (); }
| YY_BREAK
| case 4:
| YY_RULE_SETUP
| #line 5 "conftest.l"
| { yyless (1); }
| YY_BREAK
| case 5:
| YY_RULE_SETUP
| #line 6 "conftest.l"
| { yyless (input () != 0); }
| YY_BREAK
| case 6:
| YY_RULE_SETUP
| #line 7 "conftest.l"
| { unput (yytext[0]); }
| YY_BREAK
| case 7:
| YY_RULE_SETUP
| #line 8 "conftest.l"
| { BEGIN INITIAL; }
| YY_BREAK
| case 8:
| YY_RULE_SETUP
| #line 9 "conftest.l"
| ECHO;
| YY_BREAK
| #line 675 "lex.yy.c"
| case YY_STATE_EOF(INITIAL):
| yyterminate();
|
| case YY_END_OF_BUFFER:
| {
| /* Amount of text matched not including the EOB char. */
| int yy_amount_of_matched_text = (int) (yy_cp - yytext_ptr) - 1;
|
| /* Undo the effects of YY_DO_BEFORE_ACTION. */
| *yy_cp = yy_hold_char;
| YY_RESTORE_YY_MORE_OFFSET
|
| if ( yy_current_buffer->yy_buffer_status == YY_BUFFER_NEW )
| {
| /* We're scanning a new file or input source. It's
| * possible that this happened because the user
| * just pointed yyin at a new source and called
| * yylex(). If so, then we have to assure
| * consistency between yy_current_buffer and our
| * globals. Here is the right place to do so, because
| * this is the first action (other than possibly a
| * back-up) that will match for the new input source.
| */
| yy_n_chars = yy_current_buffer->yy_n_chars;
| yy_current_buffer->yy_input_file = yyin;
| yy_current_buffer->yy_buffer_status = YY_BUFFER_NORMAL;
| }
|
| /* Note that here we test for yy_c_buf_p "<=" to the position
| * of the first EOB in the buffer, since yy_c_buf_p will
| * already have been incremented past the NUL character
| * (since all states make transitions on EOB to the
| * end-of-buffer state). Contrast this with the test
| * in input().
| */
| if ( yy_c_buf_p <= &yy_current_buffer->yy_ch_buf[yy_n_chars] )
| { /* This was really a NUL. */
| yy_state_type yy_next_state;
|
| yy_c_buf_p = yytext_ptr + yy_amount_of_matched_text;
|
| yy_current_state = yy_get_previous_state();
|
| /* Okay, we're now positioned to make the NUL
| * transition. We couldn't have
| * yy_get_previous_state() go ahead and do it
| * for us because it doesn't know how to deal
| * with the possibility of jamming (and we don't
| * want to build jamming into it because then it
| * will run more slowly).
| */
|
| yy_next_state = yy_try_NUL_trans( yy_current_state );
|
| yy_bp = yytext_ptr + YY_MORE_ADJ;
|
| if ( yy_next_state )
| {
| /* Consume the NUL. */
| yy_cp = ++yy_c_buf_p;
| yy_current_state = yy_next_state;
| goto yy_match;
| }
|
| else
| {
| yy_cp = yy_c_buf_p;
| goto yy_find_action;
| }
| }
|
| else switch ( yy_get_next_buffer() )
| {
| case EOB_ACT_END_OF_FILE:
| {
| yy_did_buffer_switch_on_eof = 0;
|
| if ( yywrap() )
| {
| /* Note: because we've taken care in
| * yy_get_next_buffer() to have set up
| * yytext, we can now set up
| * yy_c_buf_p so that if some total
| * hoser (like flex itself) wants to
| * call the scanner after we return the
| * YY_NULL, it'll still work - another
| * YY_NULL will get returned.
| */
| yy_c_buf_p = yytext_ptr + YY_MORE_ADJ;
|
| yy_act = YY_STATE_EOF(YY_START);
| goto do_action;
| }
|
| else
| {
| if ( ! yy_did_buffer_switch_on_eof )
| YY_NEW_FILE;
| }
| break;
| }
|
| case EOB_ACT_CONTINUE_SCAN:
| yy_c_buf_p =
| yytext_ptr + yy_amount_of_matched_text;
|
| yy_current_state = yy_get_previous_state();
|
| yy_cp = yy_c_buf_p;
| yy_bp = yytext_ptr + YY_MORE_ADJ;
| goto yy_match;
|
| case EOB_ACT_LAST_MATCH:
| yy_c_buf_p =
| &yy_current_buffer->yy_ch_buf[yy_n_chars];
|
| yy_current_state = yy_get_previous_state();
|
| yy_cp = yy_c_buf_p;
| yy_bp = yytext_ptr + YY_MORE_ADJ;
| goto yy_find_action;
| }
| break;
| }
|
| default:
| YY_FATAL_ERROR(
| "fatal flex scanner internal error--no action found" );
| } /* end of action switch */
| } /* end of scanning one token */
| } /* end of yylex */
|
|
| /* yy_get_next_buffer - try to read in a new buffer
| *
| * Returns a code representing an action:
| * EOB_ACT_LAST_MATCH -
| * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
| * EOB_ACT_END_OF_FILE - end of file
| */
|
| #ifdef YY_USE_PROTOS
| static int yy_get_next_buffer(void)
| #else
| static int yy_get_next_buffer()
| #endif
| {
| char *dest = yy_current_buffer->yy_ch_buf;
| char *source = yytext_ptr;
| int number_to_move, i;
| int ret_val;
|
| if ( yy_c_buf_p > &yy_current_buffer->yy_ch_buf[yy_n_chars + 1] )
| YY_FATAL_ERROR(
| "fatal flex scanner internal error--end of buffer missed" );
|
| if ( yy_current_buffer->yy_fill_buffer == 0 )
| { /* Don't try to fill the buffer, so this is an EOF. */
| if ( yy_c_buf_p - yytext_ptr - YY_MORE_ADJ == 1 )
| {
| /* We matched a single character, the EOB, so
| * treat this as a final EOF.
| */
| return EOB_ACT_END_OF_FILE;
| }
|
| else
| {
| /* We matched some text prior to the EOB, first
| * process it.
| */
| return EOB_ACT_LAST_MATCH;
| }
| }
|
| /* Try to read more data. */
|
| /* First move last chars to start of buffer. */
| number_to_move = (int) (yy_c_buf_p - yytext_ptr) - 1;
|
| for ( i = 0; i < number_to_move; ++i )
| *(dest++) = *(source++);
|
| if ( yy_current_buffer->yy_buffer_status == YY_BUFFER_EOF_PENDING )
| /* don't do the read, it's not guaranteed to return an EOF,
| * just force an EOF
| */
| yy_current_buffer->yy_n_chars = yy_n_chars = 0;
|
| else
| {
| int num_to_read =
| yy_current_buffer->yy_buf_size - number_to_move - 1;
|
| while ( num_to_read <= 0 )
| { /* Not enough room in the buffer - grow it. */
| #ifdef YY_USES_REJECT
| YY_FATAL_ERROR(
| "input buffer overflow, can't enlarge buffer because scanner uses REJECT" );
| #else
|
| /* just a shorter name for the current buffer */
| YY_BUFFER_STATE b = yy_current_buffer;
|
| int yy_c_buf_p_offset =
| (int) (yy_c_buf_p - b->yy_ch_buf);
|
| if ( b->yy_is_our_buffer )
| {
| int new_size = b->yy_buf_size * 2;
|
| if ( new_size <= 0 )
| b->yy_buf_size += b->yy_buf_size / 8;
| else
| b->yy_buf_size *= 2;
|
| b->yy_ch_buf = (char *)
| /* Include room in for 2 EOB chars. */
| yy_flex_realloc( (void *) b->yy_ch_buf,
| b->yy_buf_size + 2 );
| }
| else
| /* Can't grow it, we don't own it. */
| b->yy_ch_buf = 0;
|
| if ( ! b->yy_ch_buf )
| YY_FATAL_ERROR(
| "fatal error - scanner input buffer overflow" );
|
| yy_c_buf_p = &b->yy_ch_buf[yy_c_buf_p_offset];
|
| num_to_read = yy_current_buffer->yy_buf_size -
| number_to_move - 1;
| #endif
| }
|
| if ( num_to_read > YY_READ_BUF_SIZE )
| num_to_read = YY_READ_BUF_SIZE;
|
| /* Read in more data. */
| YY_INPUT( (&yy_current_buffer->yy_ch_buf[number_to_move]),
| yy_n_chars, num_to_read );
|
| yy_current_buffer->yy_n_chars = yy_n_chars;
| }
|
| if ( yy_n_chars == 0 )
| {
| if ( number_to_move == YY_MORE_ADJ )
| {
| ret_val = EOB_ACT_END_OF_FILE;
| yyrestart( yyin );
| }
|
| else
| {
| ret_val = EOB_ACT_LAST_MATCH;
| yy_current_buffer->yy_buffer_status =
| YY_BUFFER_EOF_PENDING;
| }
| }
|
| else
| ret_val = EOB_ACT_CONTINUE_SCAN;
|
| yy_n_chars += number_to_move;
| yy_current_buffer->yy_ch_buf[yy_n_chars] = YY_END_OF_BUFFER_CHAR;
| yy_current_buffer->yy_ch_buf[yy_n_chars + 1] = YY_END_OF_BUFFER_CHAR;
|
| yytext_ptr = &yy_current_buffer->yy_ch_buf[0];
|
| return ret_val;
| }
|
|
| /* yy_get_previous_state - get the state just before the EOB char was reached */
|
| #ifdef YY_USE_PROTOS
| static yy_state_type yy_get_previous_state(void)
| #else
| static yy_state_type yy_get_previous_state()
| #endif
| {
| yy_state_type yy_current_state;
| char *yy_cp;
|
| yy_current_state = yy_start;
| yy_state_ptr = yy_state_buf;
| *yy_state_ptr++ = yy_current_state;
|
| for ( yy_cp = yytext_ptr + YY_MORE_ADJ; yy_cp < yy_c_buf_p; ++yy_cp )
| {
| YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[(unsigned int) yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| *yy_state_ptr++ = yy_current_state;
| }
|
| return yy_current_state;
| }
|
|
| /* yy_try_NUL_trans - try to make a transition on the NUL character
| *
| * synopsis
| * next_state = yy_try_NUL_trans( current_state );
| */
|
| #ifdef YY_USE_PROTOS
| static yy_state_type yy_try_NUL_trans( yy_state_type yy_current_state )
| #else
| static yy_state_type yy_try_NUL_trans( yy_current_state )
| yy_state_type yy_current_state;
| #endif
| {
| int yy_is_jam;
|
| YY_CHAR yy_c = 1;
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[(unsigned int) yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| yy_is_jam = (yy_current_state == 12);
| if ( ! yy_is_jam )
| *yy_state_ptr++ = yy_current_state;
|
| return yy_is_jam ? 0 : yy_current_state;
| }
|
|
| #ifndef YY_NO_UNPUT
| #ifdef YY_USE_PROTOS
| static void yyunput( int c, char *yy_bp )
| #else
| static void yyunput( c, yy_bp )
| int c;
| char *yy_bp;
| #endif
| {
| char *yy_cp = yy_c_buf_p;
|
| /* undo effects of setting up yytext */
| *yy_cp = yy_hold_char;
|
| if ( yy_cp < yy_current_buffer->yy_ch_buf + 2 )
| { /* need to shift things up to make room */
| /* +2 for EOB chars. */
| int number_to_move = yy_n_chars + 2;
| char *dest = &yy_current_buffer->yy_ch_buf[
| yy_current_buffer->yy_buf_size + 2];
| char *source =
| &yy_current_buffer->yy_ch_buf[number_to_move];
|
| while ( source > yy_current_buffer->yy_ch_buf )
| *--dest = *--source;
|
| yy_cp += (int) (dest - source);
| yy_bp += (int) (dest - source);
| yy_current_buffer->yy_n_chars =
| yy_n_chars = yy_current_buffer->yy_buf_size;
|
| if ( yy_cp < yy_current_buffer->yy_ch_buf + 2 )
| YY_FATAL_ERROR( "flex scanner push-back overflow" );
| }
|
| *--yy_cp = (char) c;
|
|
| yytext_ptr = yy_bp;
| yy_hold_char = *yy_cp;
| yy_c_buf_p = yy_cp;
| }
| #endif /* ifndef YY_NO_UNPUT */
|
|
| #ifndef YY_NO_INPUT
| #ifdef __cplusplus
| static int yyinput()
| #else
| #ifdef YY_USE_PROTOS
| static int input(void)
| #else
| static int input()
| #endif
| #endif
| {
| int c;
|
| *yy_c_buf_p = yy_hold_char;
|
| if ( *yy_c_buf_p == YY_END_OF_BUFFER_CHAR )
| {
| /* yy_c_buf_p now points to the character we want to return.
| * If this occurs *before* the EOB characters, then it's a
| * valid NUL; if not, then we've hit the end of the buffer.
| */
| if ( yy_c_buf_p < &yy_current_buffer->yy_ch_buf[yy_n_chars] )
| /* This was really a NUL. */
| *yy_c_buf_p = '\0';
|
| else
| { /* need more input */
| int offset = yy_c_buf_p - yytext_ptr;
| ++yy_c_buf_p;
|
| switch ( yy_get_next_buffer() )
| {
| case EOB_ACT_LAST_MATCH:
| /* This happens because yy_g_n_b()
| * sees that we've accumulated a
| * token and flags that we need to
| * try matching the token before
| * proceeding. But for input(),
| * there's no matching to consider.
| * So convert the EOB_ACT_LAST_MATCH
| * to EOB_ACT_END_OF_FILE.
| */
|
| /* Reset buffer status. */
| yyrestart( yyin );
|
| /* fall through */
|
| case EOB_ACT_END_OF_FILE:
| {
| if ( yywrap() )
| return EOF;
|
| if ( ! yy_did_buffer_switch_on_eof )
| YY_NEW_FILE;
| #ifdef __cplusplus
| return yyinput();
| #else
| return input();
| #endif
| }
|
| case EOB_ACT_CONTINUE_SCAN:
| yy_c_buf_p = yytext_ptr + offset;
| break;
| }
| }
| }
|
| c = *(unsigned char *) yy_c_buf_p; /* cast for 8-bit char's */
| *yy_c_buf_p = '\0'; /* preserve yytext */
| yy_hold_char = *++yy_c_buf_p;
|
|
| return c;
| }
| #endif /* ifndef YY_NO_INPUT */
|
|
| #ifdef YY_USE_PROTOS
| void yyrestart( FILE *input_file )
| #else
| void yyrestart( input_file )
| FILE *input_file;
| #endif
| {
| if ( ! yy_current_buffer )
| yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE );
|
| yy_init_buffer( yy_current_buffer, input_file );
| yy_load_buffer_state();
| }
|
|
| #ifdef YY_USE_PROTOS
| void yy_switch_to_buffer( YY_BUFFER_STATE new_buffer )
| #else
| void yy_switch_to_buffer( new_buffer )
| YY_BUFFER_STATE new_buffer;
| #endif
| {
| if ( yy_current_buffer == new_buffer )
| return;
|
| if ( yy_current_buffer )
| {
| /* Flush out information for old buffer. */
| *yy_c_buf_p = yy_hold_char;
| yy_current_buffer->yy_buf_pos = yy_c_buf_p;
| yy_current_buffer->yy_n_chars = yy_n_chars;
| }
|
| yy_current_buffer = new_buffer;
| yy_load_buffer_state();
|
| /* We don't actually know whether we did this switch during
| * EOF (yywrap()) processing, but the only time this flag
| * is looked at is after yywrap() is called, so it's safe
| * to go ahead and always set it.
| */
| yy_did_buffer_switch_on_eof = 1;
| }
|
|
| #ifdef YY_USE_PROTOS
| void yy_load_buffer_state( void )
| #else
| void yy_load_buffer_state()
| #endif
| {
| yy_n_chars = yy_current_buffer->yy_n_chars;
| yytext_ptr = yy_c_buf_p = yy_current_buffer->yy_buf_pos;
| yyin = yy_current_buffer->yy_input_file;
| yy_hold_char = *yy_c_buf_p;
| }
|
|
| #ifdef YY_USE_PROTOS
| YY_BUFFER_STATE yy_create_buffer( FILE *file, int size )
| #else
| YY_BUFFER_STATE yy_create_buffer( file, size )
| FILE *file;
| int size;
| #endif
| {
| YY_BUFFER_STATE b;
|
| b = (YY_BUFFER_STATE) yy_flex_alloc( sizeof( struct yy_buffer_state ) );
| if ( ! b )
| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
|
| b->yy_buf_size = size;
|
| /* yy_ch_buf has to be 2 characters longer than the size given because
| * we need to put in 2 end-of-buffer characters.
| */
| b->yy_ch_buf = (char *) yy_flex_alloc( b->yy_buf_size + 2 );
| if ( ! b->yy_ch_buf )
| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
|
| b->yy_is_our_buffer = 1;
|
| yy_init_buffer( b, file );
|
| return b;
| }
|
|
| #ifdef YY_USE_PROTOS
| void yy_delete_buffer( YY_BUFFER_STATE b )
| #else
| void yy_delete_buffer( b )
| YY_BUFFER_STATE b;
| #endif
| {
| if ( ! b )
| return;
|
| if ( b == yy_current_buffer )
| yy_current_buffer = (YY_BUFFER_STATE) 0;
|
| if ( b->yy_is_our_buffer )
| yy_flex_free( (void *) b->yy_ch_buf );
|
| yy_flex_free( (void *) b );
| }
|
|
| #ifndef YY_ALWAYS_INTERACTIVE
| #ifndef YY_NEVER_INTERACTIVE
| extern int isatty YY_PROTO(( int ));
| #endif
| #endif
|
| #ifdef YY_USE_PROTOS
| void yy_init_buffer( YY_BUFFER_STATE b, FILE *file )
| #else
| void yy_init_buffer( b, file )
| YY_BUFFER_STATE b;
| FILE *file;
| #endif
|
|
| {
| yy_flush_buffer( b );
|
| b->yy_input_file = file;
| b->yy_fill_buffer = 1;
|
| #if YY_ALWAYS_INTERACTIVE
| b->yy_is_interactive = 1;
| #else
| #if YY_NEVER_INTERACTIVE
| b->yy_is_interactive = 0;
| #else
| b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
| #endif
| #endif
| }
|
|
| #ifdef YY_USE_PROTOS
| void yy_flush_buffer( YY_BUFFER_STATE b )
| #else
| void yy_flush_buffer( b )
| YY_BUFFER_STATE b;
| #endif
|
| {
| if ( ! b )
| return;
|
| b->yy_n_chars = 0;
|
| /* We always need two end-of-buffer characters. The first causes
| * a transition to the end-of-buffer state. The second causes
| * a jam in that state.
| */
| b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
| b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
|
| b->yy_buf_pos = &b->yy_ch_buf[0];
|
| b->yy_at_bol = 1;
| b->yy_buffer_status = YY_BUFFER_NEW;
|
| if ( b == yy_current_buffer )
| yy_load_buffer_state();
| }
|
|
| #ifndef YY_NO_SCAN_BUFFER
| #ifdef YY_USE_PROTOS
| YY_BUFFER_STATE yy_scan_buffer( char *base, yy_size_t size )
| #else
| YY_BUFFER_STATE yy_scan_buffer( base, size )
| char *base;
| yy_size_t size;
| #endif
| {
| YY_BUFFER_STATE b;
|
| if ( size < 2 ||
| base[size-2] != YY_END_OF_BUFFER_CHAR ||
| base[size-1] != YY_END_OF_BUFFER_CHAR )
| /* They forgot to leave room for the EOB's. */
| return 0;
|
| b = (YY_BUFFER_STATE) yy_flex_alloc( sizeof( struct yy_buffer_state ) );
| if ( ! b )
| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
|
| b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
| b->yy_buf_pos = b->yy_ch_buf = base;
| b->yy_is_our_buffer = 0;
| b->yy_input_file = 0;
| b->yy_n_chars = b->yy_buf_size;
| b->yy_is_interactive = 0;
| b->yy_at_bol = 1;
| b->yy_fill_buffer = 0;
| b->yy_buffer_status = YY_BUFFER_NEW;
|
| yy_switch_to_buffer( b );
|
| return b;
| }
| #endif
|
|
| #ifndef YY_NO_SCAN_STRING
| #ifdef YY_USE_PROTOS
| YY_BUFFER_STATE yy_scan_string( yyconst char *yy_str )
| #else
| YY_BUFFER_STATE yy_scan_string( yy_str )
| yyconst char *yy_str;
| #endif
| {
| int len;
| for ( len = 0; yy_str[len]; ++len )
| ;
|
| return yy_scan_bytes( yy_str, len );
| }
| #endif
|
|
| #ifndef YY_NO_SCAN_BYTES
| #ifdef YY_USE_PROTOS
| YY_BUFFER_STATE yy_scan_bytes( yyconst char *bytes, int len )
| #else
| YY_BUFFER_STATE yy_scan_bytes( bytes, len )
| yyconst char *bytes;
| int len;
| #endif
| {
| YY_BUFFER_STATE b;
| char *buf;
| yy_size_t n;
| int i;
|
| /* Get memory for full buffer, including space for trailing EOB's. */
| n = len + 2;
| buf = (char *) yy_flex_alloc( n );
| if ( ! buf )
| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
|
| for ( i = 0; i < len; ++i )
| buf[i] = bytes[i];
|
| buf[len] = buf[len+1] = YY_END_OF_BUFFER_CHAR;
|
| b = yy_scan_buffer( buf, n );
| if ( ! b )
| YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
|
| /* It's okay to grow etc. this buffer, and we should throw it
| * away when we're done.
| */
| b->yy_is_our_buffer = 1;
|
| return b;
| }
| #endif
|
|
| #ifndef YY_NO_PUSH_STATE
| #ifdef YY_USE_PROTOS
| static void yy_push_state( int new_state )
| #else
| static void yy_push_state( new_state )
| int new_state;
| #endif
| {
| if ( yy_start_stack_ptr >= yy_start_stack_depth )
| {
| yy_size_t new_size;
|
| yy_start_stack_depth += YY_START_STACK_INCR;
| new_size = yy_start_stack_depth * sizeof( int );
|
| if ( ! yy_start_stack )
| yy_start_stack = (int *) yy_flex_alloc( new_size );
|
| else
| yy_start_stack = (int *) yy_flex_realloc(
| (void *) yy_start_stack, new_size );
|
| if ( ! yy_start_stack )
| YY_FATAL_ERROR(
| "out of memory expanding start-condition stack" );
| }
|
| yy_start_stack[yy_start_stack_ptr++] = YY_START;
|
| BEGIN(new_state);
| }
| #endif
|
|
| #ifndef YY_NO_POP_STATE
| #ifdef YY_USE_PROTOS
| static void yy_pop_state(void)
| #else
| static void yy_pop_state()
| #endif
| {
| if ( --yy_start_stack_ptr < 0 )
| YY_FATAL_ERROR( "start-condition stack underflow" );
|
| BEGIN(yy_start_stack[yy_start_stack_ptr]);
| }
| #endif
|
|
| #ifndef YY_NO_TOP_STATE
| #ifdef YY_USE_PROTOS
| static int yy_top_state(void)
| #else
| static int yy_top_state()
| #endif
| {
| return yy_start_stack[yy_start_stack_ptr - 1];
| }
| #endif
|
| #ifndef YY_EXIT_FAILURE
| #define YY_EXIT_FAILURE 2
| #endif
|
| #ifdef YY_USE_PROTOS
| static void yy_fatal_error( yyconst char msg[] )
| #else
| static void yy_fatal_error( msg )
| char msg[];
| #endif
| {
| (void) fprintf( stderr, "%s\n", msg );
| exit( YY_EXIT_FAILURE );
| }
|
|
|
| /* Redefine yyless() so it works in section 3 code. */
|
| #undef yyless
| #define yyless(n) \
| do \
| { \
| /* Undo effects of setting up yytext. */ \
| yytext[yyleng] = yy_hold_char; \
| yy_c_buf_p = yytext + n; \
| yy_hold_char = *yy_c_buf_p; \
| *yy_c_buf_p = '\0'; \
| yyleng = n; \
| } \
| while ( 0 )
|
|
| /* Internal utility routines. */
|
| #ifndef yytext_ptr
| #ifdef YY_USE_PROTOS
| static void yy_flex_strncpy( char *s1, yyconst char *s2, int n )
| #else
| static void yy_flex_strncpy( s1, s2, n )
| char *s1;
| yyconst char *s2;
| int n;
| #endif
| {
| int i;
| for ( i = 0; i < n; ++i )
| s1[i] = s2[i];
| }
| #endif
|
| #ifdef YY_NEED_STRLEN
| #ifdef YY_USE_PROTOS
| static int yy_flex_strlen( yyconst char *s )
| #else
| static int yy_flex_strlen( s )
| yyconst char *s;
| #endif
| {
| int n;
| for ( n = 0; s[n]; ++n )
| ;
|
| return n;
| }
| #endif
|
|
| #ifdef YY_USE_PROTOS
| static void *yy_flex_alloc( yy_size_t size )
| #else
| static void *yy_flex_alloc( size )
| yy_size_t size;
| #endif
| {
| return (void *) malloc( size );
| }
|
| #ifdef YY_USE_PROTOS
| static void *yy_flex_realloc( void *ptr, yy_size_t size )
| #else
| static void *yy_flex_realloc( ptr, size )
| void *ptr;
| yy_size_t size;
| #endif
| {
| /* The cast to (char *) in the following accommodates both
| * implementations that use char* generic pointers, and those
| * that use void* generic pointers. It works with the latter
| * because both ANSI C and C++ allow castless assignment from
| * any pointer type to void*, and deal with argument conversions
| * as though doing an assignment.
| */
| return (void *) realloc( (char *) ptr, size );
| }
|
| #ifdef YY_USE_PROTOS
| static void yy_flex_free( void *ptr )
| #else
| static void yy_flex_free( ptr )
| void *ptr;
| #endif
| {
| free( ptr );
| }
|
| #if YY_MAIN
| int main()
| {
| yylex();
| return 0;
| }
| #endif
| #line 9 "conftest.l"
|
| #ifdef YYTEXT_POINTER
| extern char *yytext;
| #endif
| int
| main (void)
| {
| return ! yylex () + ! yywrap ();
| }
configure:12883: cc -o conftest -O2 -pipe -fno-strict-aliasing -rpath=/usr/lib:/usr/local/lib conftest.c -lfl >&5
cc: warning: argument unused during compilation: '-rpath=/usr/lib:/usr/local/lib'
conftest.l:6:20: warning: comparison between pointer and integer ('char *' and 'int')
{ yyless (input () != 0); }
~~~~~~~~~~~~~~~~~^~~~~
conftest.c:138:32: note: expanded from macro 'yyless'
yy_c_buf_p = yy_cp = yy_bp + n - YY_MORE_ADJ; \
~~~~~~~~^~~~~~~~~~~~~~~~~~
conftest.l:6:3: warning: incompatible integer to pointer conversion assigning to 'char *' from 'int' [-Wint-conversion]
{ yyless (input () != 0); }
^~~~~~~~~~~~~~~~~~~~~~
conftest.c:138:22: note: expanded from macro 'yyless'
yy_c_buf_p = yy_cp = yy_bp + n - YY_MORE_ADJ; \
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~
2 warnings generated.
configure:12890: $? = 0
configure:12914: result: -lfl
configure:12920: checking whether yytext is a pointer
configure:12941: cc -o conftest -O2 -pipe -fno-strict-aliasing -rpath=/usr/lib:/usr/local/lib conftest.c -lfl >&5
cc: warning: argument unused during compilation: '-rpath=/usr/lib:/usr/local/lib'
conftest.l:6:20: warning: comparison between pointer and integer ('char *' and 'int')
{ yyless (input () != 0); }
~~~~~~~~~~~~~~~~~^~~~~
conftest.c:139:32: note: expanded from macro 'yyless'
yy_c_buf_p = yy_cp = yy_bp + n - YY_MORE_ADJ; \
~~~~~~~~^~~~~~~~~~~~~~~~~~
conftest.l:6:3: warning: incompatible integer to pointer conversion assigning to 'char *' from 'int' [-Wint-conversion]
{ yyless (input () != 0); }
^~~~~~~~~~~~~~~~~~~~~~
conftest.c:139:22: note: expanded from macro 'yyless'
yy_c_buf_p = yy_cp = yy_bp + n - YY_MORE_ADJ; \
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~
2 warnings generated.
configure:12948: $? = 0
configure:12970: result: yes
configure:12986: checking for bison
configure:13002: found /usr/local/bin/bison
configure:13013: result: bison -y
configure:13032: checking for special C compiler options needed for large files
configure:13127: result: no
configure:13133: checking for _FILE_OFFSET_BITS value needed for large files
configure:13168: cc -c -O2 -pipe -fno-strict-aliasing conftest.c >&5
configure:13175: $? = 0
configure:13244: result: no
configure:13387: checking for cpp
configure:13406: found /usr/bin/cpp
configure:13418: result: /usr/bin/cpp
configure:13434: checking if /usr/bin/cpp requires -undef
configure:13445: result: yes
configure:13460: checking if /usr/bin/cpp requires -traditional
configure:13474: error: /usr/bin/cpp does not preserve whitespace with or without -traditional. I don't know what to do.
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=amd64-portbld-freebsd9.0
ac_cv_c_compiler_gnu=yes
ac_cv_env_CCASFLAGS_set=''
ac_cv_env_CCASFLAGS_value=''
ac_cv_env_CCAS_set=''
ac_cv_env_CCAS_value=''
ac_cv_env_CC_set=set
ac_cv_env_CC_value=cc
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-O2 -pipe -fno-strict-aliasing'
ac_cv_env_CPPFLAGS_set=set
ac_cv_env_CPPFLAGS_value=''
ac_cv_env_CPP_set=set
ac_cv_env_CPP_value=cpp
ac_cv_env_DBUS_CFLAGS_set=''
ac_cv_env_DBUS_CFLAGS_value=''
ac_cv_env_DBUS_LIBS_set=''
ac_cv_env_DBUS_LIBS_value=''
ac_cv_env_DGA_CFLAGS_set=''
ac_cv_env_DGA_CFLAGS_value=''
ac_cv_env_DGA_LIBS_set=''
ac_cv_env_DGA_LIBS_value=''
ac_cv_env_DMXEXAMPLES_DEP_CFLAGS_set=''
ac_cv_env_DMXEXAMPLES_DEP_CFLAGS_value=''
ac_cv_env_DMXEXAMPLES_DEP_LIBS_set=''
ac_cv_env_DMXEXAMPLES_DEP_LIBS_value=''
ac_cv_env_DMXMODULES_CFLAGS_set=''
ac_cv_env_DMXMODULES_CFLAGS_value=''
ac_cv_env_DMXMODULES_LIBS_set=''
ac_cv_env_DMXMODULES_LIBS_value=''
ac_cv_env_DMXXIEXAMPLES_DEP_CFLAGS_set=''
ac_cv_env_DMXXIEXAMPLES_DEP_CFLAGS_value=''
ac_cv_env_DMXXIEXAMPLES_DEP_LIBS_set=''
ac_cv_env_DMXXIEXAMPLES_DEP_LIBS_value=''
ac_cv_env_DMXXMUEXAMPLES_DEP_CFLAGS_set=''
ac_cv_env_DMXXMUEXAMPLES_DEP_CFLAGS_value=''
ac_cv_env_DMXXMUEXAMPLES_DEP_LIBS_set=''
ac_cv_env_DMXXMUEXAMPLES_DEP_LIBS_value=''
ac_cv_env_DRI2PROTO_CFLAGS_set=''
ac_cv_env_DRI2PROTO_CFLAGS_value=''
ac_cv_env_DRI2PROTO_LIBS_set=''
ac_cv_env_DRI2PROTO_LIBS_value=''
ac_cv_env_DRIPROTO_CFLAGS_set=''
ac_cv_env_DRIPROTO_CFLAGS_value=''
ac_cv_env_DRIPROTO_LIBS_set=''
ac_cv_env_DRIPROTO_LIBS_value=''
ac_cv_env_DRI_CFLAGS_set=''
ac_cv_env_DRI_CFLAGS_value=''
ac_cv_env_DRI_LIBS_set=''
ac_cv_env_DRI_LIBS_value=''
ac_cv_env_GLIB_CFLAGS_set=''
ac_cv_env_GLIB_CFLAGS_value=''
ac_cv_env_GLIB_LIBS_set=''
ac_cv_env_GLIB_LIBS_value=''
ac_cv_env_GL_CFLAGS_set=''
ac_cv_env_GL_CFLAGS_value=''
ac_cv_env_GL_LIBS_set=''
ac_cv_env_GL_LIBS_value=''
ac_cv_env_HAL_CFLAGS_set=''
ac_cv_env_HAL_CFLAGS_value=''
ac_cv_env_HAL_LIBS_set=''
ac_cv_env_HAL_LIBS_value=''
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=' -rpath=/usr/lib:/usr/local/lib'
ac_cv_env_LIBDRM_CFLAGS_set=''
ac_cv_env_LIBDRM_CFLAGS_value=''
ac_cv_env_LIBDRM_LIBS_set=''
ac_cv_env_LIBDRM_LIBS_value=''
ac_cv_env_LIBS_set=''
ac_cv_env_LIBS_value=''
ac_cv_env_PCIACCESS_CFLAGS_set=''
ac_cv_env_PCIACCESS_CFLAGS_value=''
ac_cv_env_PCIACCESS_LIBS_set=''
ac_cv_env_PCIACCESS_LIBS_value=''
ac_cv_env_PKG_CONFIG_set=''
ac_cv_env_PKG_CONFIG_value=''
ac_cv_env_SELINUX_CFLAGS_set=''
ac_cv_env_SELINUX_CFLAGS_value=''
ac_cv_env_SELINUX_LIBS_set=''
ac_cv_env_SELINUX_LIBS_value=''
ac_cv_env_TSLIB_CFLAGS_set=''
ac_cv_env_TSLIB_CFLAGS_value=''
ac_cv_env_TSLIB_LIBS_set=''
ac_cv_env_TSLIB_LIBS_value=''
ac_cv_env_X11EXAMPLES_DEP_CFLAGS_set=''
ac_cv_env_X11EXAMPLES_DEP_CFLAGS_value=''
ac_cv_env_X11EXAMPLES_DEP_LIBS_set=''
ac_cv_env_X11EXAMPLES_DEP_LIBS_value=''
ac_cv_env_XDMCP_CFLAGS_set=''
ac_cv_env_XDMCP_CFLAGS_value=''
ac_cv_env_XDMCP_LIBS_set=''
ac_cv_env_XDMCP_LIBS_value=''
ac_cv_env_XDMXCONFIG_DEP_CFLAGS_set=''
ac_cv_env_XDMXCONFIG_DEP_CFLAGS_value=''
ac_cv_env_XDMXCONFIG_DEP_LIBS_set=''
ac_cv_env_XDMXCONFIG_DEP_LIBS_value=''
ac_cv_env_XEPHYR_CFLAGS_set=''
ac_cv_env_XEPHYR_CFLAGS_value=''
ac_cv_env_XEPHYR_LIBS_set=''
ac_cv_env_XEPHYR_LIBS_value=''
ac_cv_env_XF86VIDMODE_CFLAGS_set=''
ac_cv_env_XF86VIDMODE_CFLAGS_value=''
ac_cv_env_XF86VIDMODE_LIBS_set=''
ac_cv_env_XF86VIDMODE_LIBS_value=''
ac_cv_env_XLIB_CFLAGS_set=''
ac_cv_env_XLIB_CFLAGS_value=''
ac_cv_env_XLIB_LIBS_set=''
ac_cv_env_XLIB_LIBS_value=''
ac_cv_env_XNESTMODULES_CFLAGS_set=''
ac_cv_env_XNESTMODULES_CFLAGS_value=''
ac_cv_env_XNESTMODULES_LIBS_set=''
ac_cv_env_XNESTMODULES_LIBS_value=''
ac_cv_env_XORG_MODULES_CFLAGS_set=''
ac_cv_env_XORG_MODULES_CFLAGS_value=''
ac_cv_env_XORG_MODULES_LIBS_set=''
ac_cv_env_XORG_MODULES_LIBS_value=''
ac_cv_env_XPBPROXY_CFLAGS_set=''
ac_cv_env_XPBPROXY_CFLAGS_value=''
ac_cv_env_XPBPROXY_LIBS_set=''
ac_cv_env_XPBPROXY_LIBS_value=''
ac_cv_env_XRESEXAMPLES_DEP_CFLAGS_set=''
ac_cv_env_XRESEXAMPLES_DEP_CFLAGS_value=''
ac_cv_env_XRESEXAMPLES_DEP_LIBS_set=''
ac_cv_env_XRESEXAMPLES_DEP_LIBS_value=''
ac_cv_env_XSERVERCFLAGS_CFLAGS_set=''
ac_cv_env_XSERVERCFLAGS_CFLAGS_value=''
ac_cv_env_XSERVERCFLAGS_LIBS_set=''
ac_cv_env_XSERVERCFLAGS_LIBS_value=''
ac_cv_env_XSERVERLIBS_CFLAGS_set=''
ac_cv_env_XSERVERLIBS_CFLAGS_value=''
ac_cv_env_XSERVERLIBS_LIBS_set=''
ac_cv_env_XSERVERLIBS_LIBS_value=''
ac_cv_env_XTSTEXAMPLES_DEP_CFLAGS_set=''
ac_cv_env_XTSTEXAMPLES_DEP_CFLAGS_value=''
ac_cv_env_XTSTEXAMPLES_DEP_LIBS_set=''
ac_cv_env_XTSTEXAMPLES_DEP_LIBS_value=''
ac_cv_env_XWINMODULES_CFLAGS_set=''
ac_cv_env_XWINMODULES_CFLAGS_value=''
ac_cv_env_XWINMODULES_LIBS_set=''
ac_cv_env_XWINMODULES_LIBS_value=''
ac_cv_env_YACC_set=''
ac_cv_env_YACC_value=''
ac_cv_env_YFLAGS_set=''
ac_cv_env_YFLAGS_value=''
ac_cv_env_build_alias_set=set
ac_cv_env_build_alias_value=amd64-portbld-freebsd9.0
ac_cv_env_host_alias_set=''
ac_cv_env_host_alias_value=''
ac_cv_env_target_alias_set=''
ac_cv_env_target_alias_value=''
ac_cv_header_dlfcn_h=yes
ac_cv_header_inttypes_h=yes
ac_cv_header_memory_h=yes
ac_cv_header_stdc=yes
ac_cv_header_stdint_h=yes
ac_cv_header_stdlib_h=yes
ac_cv_header_string_h=yes
ac_cv_header_strings_h=yes
ac_cv_header_sys_stat_h=yes
ac_cv_header_sys_types_h=yes
ac_cv_header_unistd_h=yes
ac_cv_host=amd64-portbld-freebsd9.0
ac_cv_lib_lex=-lfl
ac_cv_objext=o
ac_cv_path_DOLT_BASH=/usr/local/bin/bash
ac_cv_path_EGREP='/usr/bin/grep -E'
ac_cv_path_FGREP='/usr/bin/grep -F'
ac_cv_path_GREP=/usr/bin/grep
ac_cv_path_RAWCPP=/usr/bin/cpp
ac_cv_path_SED=/usr/bin/sed
ac_cv_path_ac_pt_PKG_CONFIG=/usr/local/bin/pkg-config
ac_cv_prog_AWK=gawk
ac_cv_prog_CPP=cpp
ac_cv_prog_LEX=flex
ac_cv_prog_YACC='bison -y'
ac_cv_prog_ac_ct_AR=ar
ac_cv_prog_ac_ct_CC=cc
ac_cv_prog_ac_ct_OBJDUMP=objdump
ac_cv_prog_ac_ct_RANLIB=ranlib
ac_cv_prog_ac_ct_STRIP=strip
ac_cv_prog_cc_c89=''
ac_cv_prog_cc_g=yes
ac_cv_prog_lex_root=lex.yy
ac_cv_prog_lex_yytext_pointer=yes
ac_cv_prog_make_gmake_set=yes
ac_cv_sys_file_offset_bits=no
ac_cv_sys_largefile_CC=no
am_cv_CCAS_dependencies_compiler_type=gcc3
am_cv_CC_dependencies_compiler_type=gcc3
lt_cv_deplibs_check_method=pass_all
lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=''
lt_cv_ld_reload_flag=-r
lt_cv_nm_interface='BSD nm'
lt_cv_objdir=.libs
lt_cv_path_LD=/usr/bin/ld
lt_cv_path_NM='/usr/bin/nm -B'
lt_cv_prog_compiler_c_o=yes
lt_cv_prog_compiler_pic_works=yes
lt_cv_prog_compiler_rtti_exceptions=yes
lt_cv_prog_compiler_static_works=yes
lt_cv_prog_gnu_ld=yes
lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'
lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/ {"\2", (void *) \&\2},/p'\'
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \(lib[^ ]*\)$/ {"\2", (void *) \&\2},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/ {"lib\2", (void *) \&\2},/p'\'
lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\'
lt_cv_sys_max_cmd_len=262144
## ----------------- ##
## Output variables. ##
## ----------------- ##
ACLOCAL='${SHELL} /usr/ports/x11-servers/xorg-server/work/xorg-server-1.7.7/missing --run aclocal-1.11'
ADMIN_MAN_DIR=''
ADMIN_MAN_SUFFIX=''
AGP_FALSE=''
AGP_TRUE=''
AIGLX_FALSE=''
AIGLX_TRUE=''
ALLOCA=''
ALPHA_VIDEO_FALSE=''
ALPHA_VIDEO_TRUE=''
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='${SHELL} /usr/ports/x11-servers/xorg-server/work/xorg-server-1.7.7/missing --run tar'
AM_MAKEFLAGS=''
APPLE_APPLICATIONS_DIR=''
APPLE_APPLICATION_NAME=''
APP_MAN_DIR=''
APP_MAN_SUFFIX=''
AR='ar'
ARM_VIDEO_FALSE=''
ARM_VIDEO_TRUE=''
AS='as'
AUTOCONF='${SHELL} /usr/ports/x11-servers/xorg-server/work/xorg-server-1.7.7/missing --run autoconf'
AUTOHEADER='${SHELL} /usr/ports/x11-servers/xorg-server/work/xorg-server-1.7.7/missing --run autoheader'
AUTOMAKE='${SHELL} /usr/ports/x11-servers/xorg-server/work/xorg-server-1.7.7/missing --run automake-1.11'
AWK='gawk'
BASE_FONT_PATH=''
BSD_APM_FALSE=''
BSD_APM_TRUE=''
BSD_KQUEUE_APM_FALSE=''
BSD_KQUEUE_APM_TRUE=''
BUILDDOCS_FALSE=''
BUILDDOCS_TRUE=''
BUILD_DATE=''
BUILD_KDRIVEFBDEVLIB_FALSE=''
BUILD_KDRIVEFBDEVLIB_TRUE=''
BUILD_LINUXDOC_FALSE=''
BUILD_LINUXDOC_TRUE=''
BUILD_PDFDOC_FALSE=''
BUILD_PDFDOC_TRUE=''
BUILD_TIME=''
CC='cc'
CCAS='cc'
CCASDEPMODE='depmode=gcc3'
CCASFLAGS='-O2 -pipe -fno-strict-aliasing'
CCDEPMODE='depmode=gcc3'
CFLAGS='-O2 -pipe -fno-strict-aliasing'
CHANGELOG_CMD=''
COMPILEDDEFAULTFONTPATH=''
COMPOSITE_FALSE=''
COMPOSITE_TRUE=''
CONFIG_DBUS_API_FALSE=''
CONFIG_DBUS_API_TRUE=''
CONFIG_HAL_FALSE=''
CONFIG_HAL_TRUE=''
CONFIG_NEED_DBUS_FALSE=''
CONFIG_NEED_DBUS_TRUE=''
CPP='cpp'
CPPFLAGS=''
CWARNFLAGS=''
CXX='c++'
CYGPATH_W='echo'
DARWIN_LIBS=''
DBE_FALSE=''
DBE_TRUE=''
DBUS_CFLAGS=''
DBUS_LIBS=''
DEBUG_FALSE=''
DEBUG_TRUE=''
DEFAULT_LIBRARY_PATH=''
DEFAULT_LOGPREFIX=''
DEFAULT_MODULE_PATH=''
DEFS=''
DEPDIR='.deps'
DGA_CFLAGS=''
DGA_FALSE=''
DGA_LIBS=''
DGA_TRUE=''
DIX_CFLAGS=''
DIX_LIB=''
DLLTOOL='dlltool'
DMXEXAMPLES_DEP_CFLAGS=''
DMXEXAMPLES_DEP_LIBS=''
DMXMODULES_CFLAGS=''
DMXMODULES_LIBS=''
DMXXIEXAMPLES_DEP_CFLAGS=''
DMXXIEXAMPLES_DEP_LIBS=''
DMXXMUEXAMPLES_DEP_CFLAGS=''
DMXXMUEXAMPLES_DEP_LIBS=''
DMX_BUILD_LNX_FALSE=''
DMX_BUILD_LNX_TRUE=''
DMX_BUILD_USB_FALSE=''
DMX_BUILD_USB_TRUE=''
DMX_FALSE=''
DMX_TRUE=''
DOLT_BASH='/usr/local/bin/bash'
DPMSExtension_FALSE=''
DPMSExtension_TRUE=''
DRI2PROTO_CFLAGS=''
DRI2PROTO_LIBS=''
DRI2_AIGLX_FALSE=''
DRI2_AIGLX_TRUE=''
DRI2_FALSE=''
DRI2_TRUE=''
DRIPROTO_CFLAGS=''
DRIPROTO_LIBS=''
DRIVER_MAN_DIR=''
DRIVER_MAN_SUFFIX=''
DRI_CFLAGS=''
DRI_DRIVER_PATH=''
DRI_FALSE=''
DRI_LIBS=''
DRI_TRUE=''
DSYMUTIL=''
DTRACE=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP='/usr/bin/grep -E'
EXEEXT=''
F77=''
FBDEVHW_FALSE=''
FBDEVHW_TRUE=''
FC=''
FGREP='/usr/bin/grep -F'
FILE_MAN_DIR=''
FILE_MAN_SUFFIX=''
FREEBSD_KLDLOAD_FALSE=''
FREEBSD_KLDLOAD_TRUE=''
GLIB_CFLAGS=''
GLIB_LIBS=''
GLX_ARCH_DEFINES=''
GLX_DEFINES=''
GLX_FALSE=''
GLX_TRUE=''
GL_CFLAGS=''
GL_LIBS=''
GREP='/usr/bin/grep'
HAL_CFLAGS=''
HAL_LIBS=''
HAVE_DBUS_FALSE=''
HAVE_DBUS_TRUE=''
I386_VIDEO_FALSE=''
I386_VIDEO_TRUE=''
INSTALL_DATA='install -o root -g wheel -m 444'
INSTALL_LIBXF86CONFIG_FALSE=''
INSTALL_LIBXF86CONFIG_TRUE=''
INSTALL_PROGRAM='install -s -o root -g wheel -m 555'
INSTALL_SCRIPT='install -o root -g wheel -m 555'
INSTALL_SETUID_FALSE=''
INSTALL_SETUID_TRUE=''
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
INT10MODULE_FALSE=''
INT10MODULE_TRUE=''
INT10_STUB_FALSE=''
INT10_STUB_TRUE=''
INT10_VM86_FALSE=''
INT10_VM86_TRUE=''
INT10_X86EMU_FALSE=''
INT10_X86EMU_TRUE=''
KDRIVEFBDEV_FALSE=''
KDRIVEFBDEV_TRUE=''
KDRIVELINUX_FALSE=''
KDRIVELINUX_TRUE=''
KDRIVEVESA_FALSE=''
KDRIVEVESA_TRUE=''
KDRIVE_CFLAGS=''
KDRIVE_FALSE=''
KDRIVE_INCS=''
KDRIVE_LIBS=''
KDRIVE_LOCAL_LIBS=''
KDRIVE_PURE_INCS=''
KDRIVE_PURE_LIBS=''
KDRIVE_TRUE=''
LAUNCHD_ID_PREFIX=''
LD='/usr/bin/ld'
LDFLAGS=' -rpath=/usr/lib:/usr/local/lib'
LD_EXPORT_SYMBOLS_FLAG=''
LEX='flex'
LEXLIB='-lfl'
LEX_OUTPUT_ROOT='lex.yy'
LIBDRM_CFLAGS=''
LIBDRM_LIBS=''
LIBOBJS=''
LIBS=''
LIBTOOL='$(top_builddir)/doltlibtool'
LIB_MAN_DIR=''
LIB_MAN_SUFFIX=''
LINUXDOC=''
LINUX_ALPHA_FALSE=''
LINUX_ALPHA_TRUE=''
LINUX_IA64_FALSE=''
LINUX_IA64_TRUE=''
LIPO=''
LNXACPI_FALSE=''
LNXACPI_TRUE=''
LNXAPM_FALSE=''
LNXAPM_TRUE=''
LN_S='ln -s'
LTCOMPILE='$(top_builddir)/doltcompile $(COMPILE)'
LTCXXCOMPILE='$(top_builddir)/doltcompile $(CXXCOMPILE)'
LTLIBOBJS=''
MAINT='#'
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE='#'
MAIN_LIB=''
MAKEFLAGS=''
MAKEINFO='${SHELL} /usr/ports/x11-servers/xorg-server/work/xorg-server-1.7.7/missing --run makeinfo'
MAKE_HTML=''
MAKE_PDF=''
MAKE_PS=''
MAKE_TEXT=''
MISC_MAN_DIR=''
MISC_MAN_SUFFIX=''
MITSHM_FALSE=''
MITSHM_TRUE=''
MKDIR_P='./install-sh -c -d'
MULTIBUFFER_FALSE=''
MULTIBUFFER_TRUE=''
NEED_STRLCAT_FALSE=''
NEED_STRLCAT_TRUE=''
NEED_VSNPRINTF_FALSE=''
NEED_VSNPRINTF_TRUE=''
NM='/usr/bin/nm -B'
NMEDIT=''
OBJC=''
OBJCCLD=''
OBJCDEPMODE=''
OBJCFLAGS=''
OBJCLINK=''
OBJDUMP='objdump'
OBJEXT='o'
OS_LIB=''
OTOOL64=''
OTOOL=''
PACKAGE='xorg-server'
PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=xorg'
PACKAGE_NAME='xorg-server'
PACKAGE_STRING='xorg-server 1.7.7'
PACKAGE_TARNAME='xorg-server'
PACKAGE_VERSION='1.7.7'
PATH_SEPARATOR=':'
PCIACCESS_CFLAGS=''
PCIACCESS_LIBS=''
PCI_TXT_IDS_PATH=''
PERL=''
PKG_CONFIG='/usr/local/bin/pkg-config'
PPC_VIDEO_FALSE=''
PPC_VIDEO_TRUE=''
PROJECTROOT=''
PS2PDF=''
Q=''
RANLIB='ranlib'
RAWCPP='/usr/bin/cpp'
RAWCPPFLAGS='-undef'
RECORD_FALSE=''
RECORD_TRUE=''
RES_FALSE=''
RES_TRUE=''
SCREENSAVER_FALSE=''
SCREENSAVER_TRUE=''
SECURE_RPC_FALSE=''
SECURE_RPC_TRUE=''
SED='/usr/bin/sed'
SELINUX_CFLAGS=''
SELINUX_LIBS=''
SERVER_MISC_CONFIG_PATH=''
SET_MAKE=''
SHELL='/bin/sh'
SOLARIS_ASM_CFLAGS=''
SOLARIS_ASM_INLINE_FALSE=''
SOLARIS_ASM_INLINE_TRUE=''
SOLARIS_INOUT_ARCH=''
SOLARIS_VT_FALSE=''
SOLARIS_VT_TRUE=''
SPARC64_VIDEO_FALSE=''
SPARC64_VIDEO_TRUE=''
SPECIAL_DTRACE_OBJECTS_FALSE=''
SPECIAL_DTRACE_OBJECTS_TRUE=''
STANDALONE_XPBPROXY_FALSE=''
STANDALONE_XPBPROXY_TRUE=''
STRIP='strip'
TSLIB_CFLAGS=''
TSLIB_FALSE=''
TSLIB_LIBS=''
TSLIB_TRUE=''
UNITTESTS_FALSE=''
UNITTESTS_TRUE=''
UTILS_SYS_LIBS=''
V=''
VBE_FALSE=''
VBE_TRUE=''
VENDOR_NAME_SHORT=''
VERSION='1.7.7'
VGAHW_FALSE=''
VGAHW_TRUE=''
WINDRES=''
X11EXAMPLES_DEP_CFLAGS=''
X11EXAMPLES_DEP_LIBS=''
XAA_FALSE=''
XAA_TRUE=''
XACE_FALSE=''
XACE_TRUE=''
XCALIBRATE_FALSE=''
XCALIBRATE_TRUE=''
XCSECURITY_FALSE=''
XCSECURITY_TRUE=''
XDMAUTH_FALSE=''
XDMAUTH_TRUE=''
XDMCP_CFLAGS=''
XDMCP_FALSE=''
XDMCP_LIBS=''
XDMCP_TRUE=''
XDMXCONFIG_DEP_CFLAGS=''
XDMXCONFIG_DEP_LIBS=''
XDMX_CFLAGS=''
XDMX_LIBS=''
XDMX_SYS_LIBS=''
XEPHYR_CFLAGS=''
XEPHYR_FALSE=''
XEPHYR_INCS=''
XEPHYR_LIBS=''
XEPHYR_TRUE=''
XF86BIGFONT_FALSE=''
XF86BIGFONT_TRUE=''
XF86CONFIGFILE=''
XF86UTILS_FALSE=''
XF86UTILS_TRUE=''
XF86VIDMODE_CFLAGS=''
XF86VIDMODE_FALSE=''
XF86VIDMODE_LIBS=''
XF86VIDMODE_TRUE=''
XFAKESERVER_FALSE=''
XFAKESERVER_TRUE=''
XINERAMA_FALSE=''
XINERAMA_TRUE=''
XKB_BASE_DIRECTORY=''
XKB_BIN_DIRECTORY=''
XKB_COMPILED_DIR=''
XKM_OUTPUT_DIR=''
XLIB_CFLAGS=''
XLIB_LIBS=''
XNESTMODULES_CFLAGS=''
XNESTMODULES_LIBS=''
XNEST_FALSE=''
XNEST_LIBS=''
XNEST_SYS_LIBS=''
XNEST_TRUE=''
XORG_BUS_BSDPCI_FALSE=''
XORG_BUS_BSDPCI_TRUE=''
XORG_BUS_LINUXPCI_FALSE=''
XORG_BUS_LINUXPCI_TRUE=''
XORG_BUS_SPARC_FALSE=''
XORG_BUS_SPARC_TRUE=''
XORG_CFLAGS=''
XORG_FALSE=''
XORG_INCS=''
XORG_LIBS=''
XORG_MODULES_CFLAGS=''
XORG_MODULES_LIBS=''
XORG_OS=''
XORG_OS_SUBDIR=''
XORG_SGML_PATH=''
XORG_SYS_LIBS=''
XORG_TRUE=''
XPBPROXY_CFLAGS=''
XPBPROXY_LIBS=''
XQUARTZ_FALSE=''
XQUARTZ_SPARKLE=''
XQUARTZ_SPARKLE_FALSE=''
XQUARTZ_SPARKLE_TRUE=''
XQUARTZ_TRUE=''
XREGISTRY_FALSE=''
XREGISTRY_TRUE=''
XRESEXAMPLES_DEP_CFLAGS=''
XRESEXAMPLES_DEP_LIBS=''
XSDLSERVER_FALSE=''
XSDLSERVER_TRUE=''
XSDL_INCS=''
XSDL_LIBS=''
XSELINUX_FALSE=''
XSELINUX_TRUE=''
XSERVERCFLAGS_CFLAGS=''
XSERVERCFLAGS_LIBS=''
XSERVERLIBS_CFLAGS=''
XSERVERLIBS_LIBS=''
XSERVER_DTRACE_FALSE=''
XSERVER_DTRACE_TRUE=''
XSERVER_LIBS=''
XSERVER_SYS_LIBS=''
XTSTEXAMPLES_DEP_CFLAGS=''
XTSTEXAMPLES_DEP_LIBS=''
XVFB_FALSE=''
XVFB_LIBS=''
XVFB_SYS_LIBS=''
XVFB_TRUE=''
XVMC_FALSE=''
XVMC_TRUE=''
XV_FALSE=''
XV_TRUE=''
XWINMODULES_CFLAGS=''
XWINMODULES_LIBS=''
XWIN_CLIPBOARD_FALSE=''
XWIN_CLIPBOARD_TRUE=''
XWIN_FALSE=''
XWIN_GLX_WINDOWS_FALSE=''
XWIN_GLX_WINDOWS_TRUE=''
XWIN_LIBS=''
XWIN_MULTIWINDOWEXTWM_FALSE=''
XWIN_MULTIWINDOWEXTWM_TRUE=''
XWIN_MULTIWINDOW_FALSE=''
XWIN_MULTIWINDOW_TRUE=''
XWIN_NATIVEGDI_FALSE=''
XWIN_NATIVEGDI_TRUE=''
XWIN_PRIMARYFB_FALSE=''
XWIN_PRIMARYFB_TRUE=''
XWIN_RANDR_FALSE=''
XWIN_RANDR_TRUE=''
XWIN_SERVER_NAME=''
XWIN_SYS_LIBS=''
XWIN_TRUE=''
XWIN_XV_FALSE=''
XWIN_XV_TRUE=''
YACC='bison -y'
YFLAGS=''
__XCONFIGFILE__=''
abi_ansic=''
abi_extension=''
abi_videodrv=''
abi_xinput=''
ac_ct_CC='cc'
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCCAS_FALSE='#'
am__fastdepCCAS_TRUE=''
am__fastdepCC_FALSE='#'
am__fastdepCC_TRUE=''
am__fastdepOBJC_FALSE=''
am__fastdepOBJC_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__quote=''
am__tar='${AMTAR} chof - "$$tardir"'
am__untar='${AMTAR} xf -'
bindir='${exec_prefix}/bin'
build='amd64-portbld-freebsd9.0'
build_alias='amd64-portbld-freebsd9.0'
build_cpu='amd64'
build_os='freebsd9.0'
build_vendor='portbld'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
driverdir=''
dvidir='${docdir}'
exec_prefix='NONE'
extdir=''
host='amd64-portbld-freebsd9.0'
host_alias=''
host_cpu='amd64'
host_os='freebsd9.0'
host_vendor='portbld'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='/usr/local/info'
install_sh='${SHELL} /usr/ports/x11-servers/xorg-server/work/xorg-server-1.7.7/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='/var'
logdir=''
lt_ECHO='echo'
mandir='/usr/local/man'
mkdir_p='$(top_builddir)/./install-sh -c -d'
moduledir=''
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr/local'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sdkdir=''
sharedstatedir='${prefix}/com'
shavedir=''
symbol_visibility=''
sysconfdir='${prefix}/etc'
target_alias=''
## ----------- ##
## confdefs.h. ##
## ----------- ##
#define PACKAGE_NAME "xorg-server"
#define PACKAGE_TARNAME "xorg-server"
#define PACKAGE_VERSION "1.7.7"
#define PACKAGE_STRING "xorg-server 1.7.7"
#define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg"
#define PACKAGE "xorg-server"
#define VERSION "1.7.7"
#define STDC_HEADERS 1
#define HAVE_SYS_TYPES_H 1
#define HAVE_SYS_STAT_H 1
#define HAVE_STDLIB_H 1
#define HAVE_STRING_H 1
#define HAVE_MEMORY_H 1
#define HAVE_STRINGS_H 1
#define HAVE_INTTYPES_H 1
#define HAVE_STDINT_H 1
#define HAVE_UNISTD_H 1
#define HAVE_DLFCN_H 1
#define LT_OBJDIR ".libs/"
#define YYTEXT_POINTER 1
configure: exit 1
More information about the freebsd-x11
mailing list