radeon hd4650 problem
beni
beni at brinckman.info
Mon Mar 15 15:44:44 UTC 2010
On Monday 15 March 2010 16:04:21 Robert Noland wrote:
> On Mon, 2010-03-15 at 15:07 +0100, beni wrote:
> > On Sunday 14 March 2010 18:53:40 Robert Noland wrote:
> > > On Sun, 2010-03-14 at 17:32 +0100, beni wrote:
> > > > Hi,
> > > > I'm running 8.0-RELEASE-p2.
> > > > I am trying to use the radeon (or radeonhd) driver for my Sapphire
> > > > HD4650 card. But it doesn't work. I get a black screen just before
> > > > the logon/login screen should appear. And my pc freezes. I can not
> > > > get into a console with alt-f<x>. The only way out is a cold
> > > > reset/reboot. The only driver working now is Vesa in 1280x1024, but
> > > > that leaves a black border of 7-8 cm on both sides of my 23 inch
> > > > monitor...
> > > > I asked for help on the OpenSuse mailinglist (i found their email
> > > > address in the Xorg.0.log) but they said it is the drm kernel module
> > > > that is not up to date (see thread on
> > > > http://lists.opensuse.org/radeonhd/2010-03/msg00012.html). I manually
> > > > recreated a new /root/xorg.conf.new and copied it to /X11, but with
> > > > the same negative result so far.
> > >
> > > The linux folks don't know much about what is going on in FreeBSD...
> > > Especially not the suse folks. The ATI/AMD folks are fairly aware,
> > > but...
> > >
> > > > I am pasting my /etc/X11/xorg.conf and /var/log/Xorg.0.log here.
> > > > Please cc me as i not subscribed to the list.
> > > > Thanks for any help !
> > > > Beni.
> > >
> > > This is an agp card?
> >
> > This is indeed an agp card.
> >
> > > I have an idea of what is going wrong, but I would like to see an Xorg
> > > log file using the radeon driver to verify. Based on the addresses
> > > reported, I suspect that your ring buffer is being mapped inside of the
> > > framebuffer, which usually appears as corruption along with other odd
> > > issues. If so, I already have patches for that...
> > >
> > > Other possible things to try are to force it into pci mode.
> > >
> > > Option "BusType" "PCI"
> > >
> > > robert.
> >
> > The Xorg.0.log file was below in the previous mail, under the xorg.conf
> > file. But i can post it pastebin if you want it.
>
> That was with radeonhd, which doesn't output the clue that I'm looking
> for.
>
> > Where do i put that option ? In the Section Device ?
>
> Yes, exactly. The same for the options adjusting the AGPMode.
>
> robert.
>
> > Thanks for your help !
Still no go when i add the "option bustype" to the Device Section in
xorg.conf:
Section "Device"
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "RV730 Pro AGP [Radeon HD 4600 Series]"
BusID "PCI:1:0:0"
Option "AccelMethod" "EXA"
Option "BusType" "PCI"
EndSection
Section "DRI"
Mode 0666
EndSection
Do I need the AccelMethod option and the section DRI ?
This is now with the radeonhd driver. And here is the saved xorg.0.log that
goes with the radeonhd. The last message, "(WW) RADEONHD(0): DRMCPIdle: DRM CP
IDLE returned BUSY!" gets repeated over and over and over again.
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 8.0-RC3 i386
Current Operating System: FreeBSD bsdaddict 8.0-RELEASE-p2 FreeBSD 8.0-
RELEASE-p2 #4: Thu Jan 7 09:20:42 PST 2010
root at build8x32.pcbsd.org:/usr/obj/usr/pcbsd-build80/fbsd-source/8.0-
src/sys/PCBSD i386
Build Date: 08 February 2010 06:12:23PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 15 16:28:52 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "DontZap" "off"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/local/lib/X11/fonts/misc/,
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF,
/usr/local/lib/X11/fonts/Type1/,
/usr/local/lib/X11/fonts/100dpi/,
/usr/local/lib/X11/fonts/75dpi/,
/usr/local/lib/X11/fonts/misc/,
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF,
/usr/local/lib/X11/fonts/Type1/,
/usr/local/lib/X11/fonts/100dpi/,
/usr/local/lib/X11/fonts/75dpi/
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse'
will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x7a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on freebsd
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9
(--) PCI:*(0:1:0:0) 1002:9495:174b:0028 ATI Technologies Inc RV730 Pro AGP
[Radeon HD 4600 Series] rev 0, Mem @ 0xe0000000/268435456, 0xf9000000/65536,
I/O @ 0x0000a000/256, BIOS @ 0x????????/65536
(II) System resource ranges:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified
in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in
the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in
the config file.
(II) "record" will be loaded. This was enabled by default and also specified
in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in
the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in
the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeonhd"
(II) Loading /usr/local/lib/xorg/modules/drivers//radeonhd_drv.so
(II) Module radeonhd: vendor="AMD GPG"
compiled for 1.6.5, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices:
RV505 : Radeon X1550, X1550 64bit.
RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350.
RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250.
R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350.
RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200.
RV535 : Radeon X1300, X1650.
RV550 : Radeon X2300 HD.
RV560 : Radeon X1650.
RV570 : Radeon X1950, X1950 GT; FireGL V7400.
R580 : Radeon X1900, X1950; AMD Stream Processor.
R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650.
RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000.
RV620 : Radeon HD 3450, HD 3470.
RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630;
FireGL V3600/V5600.
RV635 : Radeon HD 3650, HD 3670.
RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170.
R680 : Radeon HD 3870 X2.
M52 : Mobility Radeon X1300.
M54 : Mobility Radeon X1400; M54-GL.
M56 : Mobility Radeon X1600; Mobility FireGL V5200.
M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200.
M62 : Mobility Radeon X1350.
M64 : Mobility Radeon X1450, X2300.
M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250.
M68 : Mobility Radeon X1900.
M71 : Mobility Radeon HD 2300.
M72 : Mobility Radeon HD 2400; Radeon E2400.
M74 : Mobility Radeon HD 2400 XT.
M76 : Mobility Radeon HD 2600;
(Gemini ATI) Mobility Radeon HD 2600 XT.
M82 : Mobility Radeon HD 3400.
M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700.
M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2.
RS600 : Radeon Xpress 1200, Xpress 1250.
RS690 : Radeon X1200, X1250, X1270.
RS740 : RS740, RS740M.
RS780 : Radeon HD 3100/3200/3300 Series.
R700 : Radeon R700.
RV710 : Radeon HD4570, HD4350.
RV730 : Radeon HD4670, HD4650.
RV740 : Radeon HD4770. EXPERIMENTAL AND UNTESTED.
RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro.
RV790 : Radeon HD 4890.
M92 : Mobility Radeon HD4330, HD4530, HD4570. EXPERIMENTAL.
M93 : Mobility Radeon M93. EXPERIMENTAL AND UNTESTED.
M96 : Mobility Radeon HD4600.
M97 : Mobility Radeon HD4860. EXPERIMENTAL AND UNTESTED.
M98 : Mobility Radeon HD4850, HD4870.
(II) RADEONHD: version 1.3.0, built from dist of git branch master, commit
8cbff7bf
(II) Primary Device is: PCI 01 at 00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) resource ranges after probing:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(==) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(0): Option "AccelMethod" "EXA"
(**) RADEONHD(0): Selected EXA 2D acceleration.
(II) RADEONHD(0): Card not in database: 0x9495:0x174B:0x0028; using generic
modesetting.
If - and only if - your card does not work or does not work optimally
please contact radeonhd at opensuse.org to help rectify this.
Use the subject: 0x9495:0x174B:0x0028: <name of board>
and *please* describe the problems you are seeing
in your message.
(--) RADEONHD(0): Detected an RV730 on an unidentified card
(II) RADEONHD(0): Mapped IO @ 0xf9000000 to 0x286ef000 (size 0x00010000)
(II) RADEONHD(0): AGP Card Detected
(II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location
(II) RADEONHD(0): ATOM BIOS Rom:
SubsystemVendorID: 0x174b SubsystemID: 0xe129
IOBaseAddress: 0xa000
Filename: E12901H1.SBB
BIOS Bootup Message:
113-AC29700-200 RV730 DDR2 128BIT 600E/400M
(II) RADEONHD(0): Analog TV Default Mode: 8
(II) RADEONHD(0): Found default TV Mode PAL
(II) RADEONHD(0): The detected amount of videoram exceeds the PCI BAR
aperture.
(II) RADEONHD(0): Using only 262144kB of the total 1048576kB.
(--) RADEONHD(0): VideoRAM: 262144 kByte
(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20
(II) RADEONHD(0): Start of VRAM area used by Firmware: 0xfffec
(II) RADEONHD(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEONHD(0): AtomBIOS VRAM scratch base: 0xfffec
(WW) RADEONHD(0): rhdAtomAllocateFbScratch: FW FB scratch area not located at
the end of VRAM. Scratch End: 0x104fec VRAM End: 0x10000000
(II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory
instead
(II) RADEONHD(0): Default Engine Clock: 600000
(II) RADEONHD(0): Default Memory Clock: 400000
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 16000
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 6000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): Found libdri 5.4.0.
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEONHD(0): Found libdrm 1.3.0.
(II) RADEONHD(0): Found radeon drm 1.29.0.
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f88
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f88
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1fc4
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1fc4
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 4" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1fe8
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1fe8
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 5" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) RADEONHD(0): Detected VGA mode.
(**) RADEONHD(0): Using AtomBIOS for Crtcs
(**) RADEONHD(0): Using AtomBIOS for PLLs
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): rhdAtomSetPixelClockVersion returned version 3 for index 0xc
(II) RADEONHD(0): rhdAtomSetPixelClockVersion returned version 3 for index 0xc
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size =
0x00004000)
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size =
0x00004000)
(II) RADEONHD(0): FirmwareInfo Revision 0104
(II) RADEONHD(0): Unused attribute: ul3DAccelerationEngineClock 0
(II) RADEONHD(0): Unused attribute: ulDriverTargetEngineClock 0
(II) RADEONHD(0): Unused attribute: ulDriverTargetMemoryClock 0
(II) RADEONHD(0): Unused attribute: ucASICMaxTemperature 0
(II) RADEONHD(0): Scary bits: Estimated MinEngineClock 250000 kHz
(II) RADEONHD(0): Scary bits: Estimated MinMemoryClock 250000 kHz
(II) RADEONHD(0): Default Engine Clock: 600000
(II) RADEONHD(0): Default Memory Clock: 400000
(II) RADEONHD(0): Current Engine Clock: 599060
(II) RADEONHD(0): Current Memory Clock: 396000
(II) RADEONHD(0): Current Chip Voltage: 0
(II) RADEONHD(0): Power Management: used engine clock / memory clock / core
(VDDC) voltage (0: ignore)
(II) RADEONHD(0): Power Management: Raw Ranges
(II) RADEONHD(0): Minimum 250000 kHz / 250000 kHz / 0.900 V
(II) RADEONHD(0): Maximum 712000 kHz / 550000 kHz / 1.275 V
(II) RADEONHD(0): Default 600000 kHz / 400000 kHz / 1.150 V
(II) RADEONHD(0): PowerPlayInfo Revision 0401
(II) RADEONHD(0): Power Management: Validated Ranges
(II) RADEONHD(0): Minimum 165000 kHz / 250000 kHz / 0.900 V
(II) RADEONHD(0): Maximum 712000 kHz / 550000 kHz / 1.275 V
(II) RADEONHD(0): Default 600000 kHz / 400000 kHz / 1.150 V
(II) RADEONHD(0): Power Management: Known Good Configurations
(II) RADEONHD(0): 1 600000 kHz / 400000 kHz / 1.150 V
(II) RADEONHD(0): 2 165000 kHz / 250000 kHz / 0.900 V
(II) RADEONHD(0): 3 300000 kHz / 400000 kHz / 1.000 V
(II) RADEONHD(0): 4 600000 kHz / 400000 kHz / 1.150 V
(II) RADEONHD(0): 5 600000 kHz / 400000 kHz / 1.150 V
(II) RADEONHD(0): 6 600000 kHz / 400000 kHz / 1.150 V
(II) RADEONHD(0): 7 600000 kHz / 400000 kHz / 1.150 V
(II) RADEONHD(0): 8 200000 kHz / 400000 kHz / 1.000 V
(II) RADEONHD(0): 9 300000 kHz / 400000 kHz / 1.000 V
(II) RADEONHD(0): Power Management: Final Levels
(II) RADEONHD(0): Off 165000 kHz / 250000 kHz / 0.900 V
(II) RADEONHD(0): Idle 600000 kHz / 400000 kHz / 1.150 V
(II) RADEONHD(0): Slow2D 600000 kHz / 400000 kHz / 1.150 V
(II) RADEONHD(0): Fast2D 600000 kHz / 400000 kHz / 1.150 V
(II) RADEONHD(0): Slow3D 600000 kHz / 400000 kHz / 1.150 V
(II) RADEONHD(0): Fast3D 600000 kHz / 400000 kHz / 1.150 V
(II) RADEONHD(0): Max3D 712000 kHz / 550000 kHz / 1.275 V
(II) RADEONHD(0): User 600000 kHz / 400000 kHz / 1.150 V
(II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT2
DFP2", RHD_DDC_4, RHD_HPD_1, { RHD_OUTPUT_UNIPHYC, RHD_OUTPUT_DACB } }
(II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT1
DFP1", RHD_DDC_3, RHD_HPD_0, { RHD_OUTPUT_UNIPHYA, RHD_OUTPUT_DACA } }
(II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_TV, "7PIN_DIN TV1 CV",
RHD_DDC_NONE, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
(**) RADEONHD(0): Using AtomBIOS for Outputs
(EE) RADEONHD(0): RHDHdmiInit: unknown HDMI output type
(II) RADEONHD(0): rhdAtomSelectCrtcSourceVersion returned version 2 for index
0x2a
(--) RADEONHD(0): Attaching Output AtomOutputUniphyC to Connector DVI-I 1
(**) RADEONHD(0): Using AtomBIOS for Outputs
(II) RADEONHD(0): rhdAtomSelectCrtcSourceVersion returned version 2 for index
0x2a
(--) RADEONHD(0): Attaching Output AtomOutputDACB to Connector DVI-I 1
(**) RADEONHD(0): Using AtomBIOS for Outputs
(II) RADEONHD(0): rhdAtomSelectCrtcSourceVersion returned version 2 for index
0x2a
(--) RADEONHD(0): Attaching Output AtomOutputUniphyA to Connector DVI-I 2
(**) RADEONHD(0): Using AtomBIOS for Outputs
(II) RADEONHD(0): rhdAtomSelectCrtcSourceVersion returned version 2 for index
0x2a
(--) RADEONHD(0): Attaching Output AtomOutputDACA to Connector DVI-I 2
(--) RADEONHD(0): Attaching Output AtomOutputDACB to Connector TV 7PIN_DIN
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_1/digital for Output
AtomOutputUniphyC
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_1/analog for Output
AtomOutputDACB
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/digital for Output
AtomOutputUniphyA
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/analog for Output
AtomOutputDACA
(II) RADEONHD(0): RandR: Adding RRoutput TV_7PIN_DIN for Output AtomOutputDACB
(II) RADEONHD(0): Output DVI-I_1/digital using monitor section Monitor0
(II) RADEONHD(0): Output DVI-I_1/digital has no monitor section
(II) RADEONHD(0): Output DVI-I_1/analog has no monitor section
(II) RADEONHD(0): Output DVI-I_2/digital has no monitor section
(II) RADEONHD(0): Output DVI-I_2/analog has no monitor section
(II) RADEONHD(0): Output TV_7PIN_DIN has no monitor section
(II) RADEONHD(0): Calling DAC_LoadDetection
(II) RADEONHD(0): DAC_LoadDetection Successful
(II) RADEONHD(0): AtomOutputDACA: Sensed Output: none
(II) RADEONHD(0): Calling DAC_LoadDetection
(II) RADEONHD(0): DAC_LoadDetection Successful
(II) RADEONHD(0): AtomOutputDACA: Sensed Output: VGA
(II) RADEONHD(0): Setting AtomOutputDACA to incoherent
(II) RADEONHD(0): I2C device "RHD I2C line 3:E-EDID segment register"
registered at address 0x60.
(II) RADEONHD(0): I2C device "RHD I2C line 3:ddc2" registered at address 0xA0.
(II) RADEONHD(0): EDID data for SyncMaster
(II) RADEONHD(0): Manufacturer: SAM Model: 473 Serial#: 1297691187
(II) RADEONHD(0): Year: 2008 Week: 51
(II) RADEONHD(0): EDID Version: 1.3
(II) RADEONHD(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEONHD(0): Sync: Separate Composite SyncOnGreen
(II) RADEONHD(0): Max Image Size [cm]: horiz.: 51 vert.: 29
(II) RADEONHD(0): Gamma: 2.20
(II) RADEONHD(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEONHD(0): First detailed timing is preferred mode
(II) RADEONHD(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) RADEONHD(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
(II) RADEONHD(0): Supported established timings:
(II) RADEONHD(0): 640x480 at 60Hz
(II) RADEONHD(0): 800x600 at 56Hz
(II) RADEONHD(0): 800x600 at 60Hz
(II) RADEONHD(0): 1024x768 at 60Hz
(II) RADEONHD(0): Manufacturer's mask: 0
(II) RADEONHD(0): Supported standard timings:
(II) RADEONHD(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEONHD(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) RADEONHD(0): #2: hsize: 1280 vsize 800 refresh: 60 vid: 129
(II) RADEONHD(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
(II) RADEONHD(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) RADEONHD(0): Supported detailed timing:
(II) RADEONHD(0): clock: 156.8 MHz Image Size: 510 x 287 mm
(II) RADEONHD(0): h_active: 2048 h_sync: 2096 h_sync_end 2128 h_blank_end
2208 h_border: 0
(II) RADEONHD(0): v_active: 1152 v_sync: 1155 v_sync_end 1160 v_blanking:
1185 v_border: 0
(II) RADEONHD(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H max: 81 kHz,
PixClock max 160 MHz
(II) RADEONHD(0): Monitor name: SyncMaster
(II) RADEONHD(0): Serial No: HMCQC02722
(II) RADEONHD(0): EDID (in hex):
(II) RADEONHD(0): 00ffffffffffff004c2d73043332594d
(II) RADEONHD(0): 331201030e331d782aee91a3544c9926
(II) RADEONHD(0): 0f50542308008180814081009500b300
(II) RADEONHD(0): 0101010101013b3d00a0808021403020
(II) RADEONHD(0): 3500fe1f1100001a000000fd00383c1e
(II) RADEONHD(0): 5110000a202020202020000000fc0053
(II) RADEONHD(0): 796e634d61737465720a2020000000ff
(II) RADEONHD(0): 00484d43514330323732320a202000d1
(II) RADEONHD(0): Output DVI-I_1/digital disconnected
(II) RADEONHD(0): Output DVI-I_1/analog disconnected
(II) RADEONHD(0): Output DVI-I_2/digital disconnected
(II) RADEONHD(0): Output DVI-I_2/analog connected
(II) RADEONHD(0): Output TV_7PIN_DIN disconnected
(II) RADEONHD(0): Using exact sizes for initial modes
(II) RADEONHD(0): Output DVI-I_2/analog using initial mode 2048x1152
(II) RADEONHD(0): RandR 1.2 support enabled
(==) RADEONHD(0): RGB weight 888
(==) RADEONHD(0): Default visual is TrueColor
(==) RADEONHD(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEONHD(0): Using 3840x1920 Framebuffer with 3840 pitch
(II) RADEONHD(0): FB: Allocated ScanoutBuffer at offset 0x00008000 (size =
0x01C20000)
(==) RADEONHD(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/local/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/local/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEONHD(0): FB: Allocated Offscreen Buffer at offset 0x01C28000 (size =
0x01998000)
(II) RADEONHD(0): FB: Allocated DRI Back Buffer at offset 0x035C0000 (size =
0x01C20000)
(II) RADEONHD(0): FB: Allocated DRI Depth Buffer at offset 0x051E0000 (size =
0x01C20000)
(II) RADEONHD(0): FB: Allocated DRI Textures at offset 0x06E00000 (size =
0x09000000)
(II) RADEONHD(0): Using 16 MB GART aperture
(II) RADEONHD(0): Using 2 MB for the ring buffer
(II) RADEONHD(0): Using 2 MB for vertex/indirect buffers
(II) RADEONHD(0): Using 12 MB for GART textures
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) RADEONHD(0): Mapped IO @ 0xf9000000 to 0x286ef000 (size 0x00010000)
(II) RADEONHD(0): Mapped FB @ 0xe0000000 to 0x28c00000 (size 0x10000000)
(II) RADEONHD(0): Attempting to enable power management
(II) RADEONHD(0): Current Engine Clock: 599060
(II) RADEONHD(0): Current Memory Clock: 396000
(II) RADEONHD(0): Current Chip Voltage: 0
(II) RADEONHD(0): Calling EnableCRTC
(II) RADEONHD(0): EnableCRTC Successful
(II) RADEONHD(0): Calling EnableCRTCMemReq
(II) RADEONHD(0): EnableCRTCMemReq Successful
(II) RADEONHD(0): Calling EnableCRTC
(II) RADEONHD(0): EnableCRTC Successful
(II) RADEONHD(0): Calling EnableCRTCMemReq
(II) RADEONHD(0): EnableCRTCMemReq Successful
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.2
(II) [drm] DRM open master succeeded.
(II) RADEONHD(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEONHD(0): [drm] framebuffer handle = 0xe0000000
(II) RADEONHD(0): [drm] added 1 reserved context for kernel
(II) RADEONHD(0): X context handle = 0x1
(II) RADEONHD(0): [drm] installed DRM signal handler
(II) RADEONHD(0): [agp] Mode 0x1f004a1b [AGP 0x0000/0x0000]
(II) RADEONHD(0): [agp] 16384 kB allocated with handle 0xc7b46540
(II) RADEONHD(0): [agp] ring handle = 0xf0000000
(II) RADEONHD(0): [agp] Ring mapped at 0x288ae000
(II) RADEONHD(0): [agp] ring read ptr handle = 0xf0201000
(II) RADEONHD(0): [agp] Ring read ptr mapped at 0x286ff000
(II) RADEONHD(0): [agp] vertex/indirect buffers handle = 0xf0202000
(II) RADEONHD(0): [agp] Vertex/indirect buffers mapped at 0x38c00000
(II) RADEONHD(0): [agp] GART texture map handle = 0xf0402000
(II) RADEONHD(0): [agp] GART Texture map mapped at 0x39002000
(II) RADEONHD(0): [drm] register handle = 0xf9000000
(II) RADEONHD(0): [dri] Visual configs initialized
(II) RADEONHD(0): Attempting to set Engine Clock to 600000
(II) RADEONHD(0): Current Engine Clock: 599060
(II) RADEONHD(0): Current Memory Clock: 396000
(II) RADEONHD(0): Current Chip Voltage: 0
(II) RADEONHD(0): [DRI] installation complete
(II) RADEONHD(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEONHD(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEONHD(0): [drm] dma control initialized, using IRQ 16
(II) RADEONHD(0): [drm] Initialized kernel GART heap manager, 12320768
(II) RADEONHD(0): Direct rendering enabled
(II) RADEONHD(0): Using DRM Command Processor (indirect) for acceleration.
(II) EXA(0): Offscreen pixmap area of 26836992 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) RADEONHD(0): Backing store disabled
(==) RADEONHD(0): Silken mouse enabled
(II) RADEONHD(0): RandR 1.2 enabled, ignore the following RandR disabled
message.
(II) RADEONHD(0): Calling BlankCRTC
(II) RADEONHD(0): BlankCRTC Successful
(II) RADEONHD(0): Calling BlankCRTC
(II) RADEONHD(0): BlankCRTC Successful
(II) RADEONHD(0): Calling BlankCRTC
(II) RADEONHD(0): BlankCRTC Successful
(II) RADEONHD(0): Calling BlankCRTC
(II) RADEONHD(0): BlankCRTC Successful
(II) RADEONHD(0): Calling BlankCRTC
(II) RADEONHD(0): BlankCRTC Successful
(II) RADEONHD(0): Calling BlankCRTC
(II) RADEONHD(0): BlankCRTC Successful
(II) RADEONHD(0): Calling DAC2OutputControl
(II) RADEONHD(0): DAC2OutputControl Successful
(II) RADEONHD(0): Calling DACBEncoderControl
(II) RADEONHD(0): DACBEncoderControl Successful
(II) RADEONHD(0): Calling DAC1OutputControl
(II) RADEONHD(0): DAC1OutputControl Successful
(II) RADEONHD(0): Calling DACAEncoderControl
(II) RADEONHD(0): DACAEncoderControl Successful
(II) RADEONHD(0): Calling DAC2OutputControl
(II) RADEONHD(0): DAC2OutputControl Successful
(II) RADEONHD(0): Calling DACBEncoderControl
(II) RADEONHD(0): DACBEncoderControl Successful
(II) RADEONHD(0): Calling EnableCRTC
(II) RADEONHD(0): EnableCRTC Successful
(II) RADEONHD(0): Calling EnableCRTCMemReq
(II) RADEONHD(0): EnableCRTCMemReq Successful
(II) RADEONHD(0): Calling EnableCRTC
(II) RADEONHD(0): EnableCRTC Successful
(II) RADEONHD(0): Calling EnableCRTCMemReq
(II) RADEONHD(0): EnableCRTCMemReq Successful
(II) RADEONHD(0): Calling DAC1OutputControl
(II) RADEONHD(0): DAC1OutputControl Successful
(II) RADEONHD(0): Calling EnableCRTC
(II) RADEONHD(0): EnableCRTC Successful
(II) RADEONHD(0): Calling EnableCRTCMemReq
(II) RADEONHD(0): EnableCRTCMemReq Successful
(II) RADEONHD(0): On Crtc 0 Setting 59.9 Hz Mode: Modeline "2048x1152" 156.75
2048 2096 2128 2208 1152 1155 1160 1185 +hsync -vsync
(II) RADEONHD(0): Calling SetCRTC_Timing
(II) RADEONHD(0): SetCRTC_Timing Successful
(II) RADEONHD(0): CallingSetCRTC_OverScan
(II) RADEONHD(0): Set CRTC_OverScan Successful
(II) RADEONHD(0): Calling EnableScaler
(II) RADEONHD(0): EnableScaler Successful
(II) RADEONHD(0): Calling SetPixelClock
(II) RADEONHD(0): SetPixelClock Successful
(II) RADEONHD(0): Calling SelectCRTCSource
(II) RADEONHD(0): SelectCRTCSource Successful
(II) RADEONHD(0): Calling EnableCRTCMemReq
(II) RADEONHD(0): EnableCRTCMemReq Successful
(II) RADEONHD(0): Calling EnableCRTC
(II) RADEONHD(0): EnableCRTC Successful
(II) RADEONHD(0): Calling DACAEncoderControl
(II) RADEONHD(0): DACAEncoderControl Successful
(II) RADEONHD(0): Calling DAC1OutputControl
(II) RADEONHD(0): DAC1OutputControl Successful
(II) RADEONHD(0): Calling DAC2OutputControl
(II) RADEONHD(0): DAC2OutputControl Successful
(II) RADEONHD(0): Calling DACBEncoderControl
(II) RADEONHD(0): DACBEncoderControl Successful
(II) RADEONHD(0): Calling DAC2OutputControl
(II) RADEONHD(0): DAC2OutputControl Successful
(II) RADEONHD(0): Calling DACBEncoderControl
(II) RADEONHD(0): DACBEncoderControl Successful
(II) RADEONHD(0): Calling EnableCRTC
(II) RADEONHD(0): EnableCRTC Successful
(II) RADEONHD(0): Calling EnableCRTCMemReq
(II) RADEONHD(0): EnableCRTCMemReq Successful
(II) RADEONHD(0): RHDAudioSetSupported: config 0x60040 codec 0x1
(**) Option "dpms"
(**) RADEONHD(0): DPMS enabled
(II) RADEONHD(0): Xv: Textured Video initialised.
(WW) RADEONHD(0): Option "BusType" is not used
(--) RandR disabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEONHD(0): Setting screen physical size to 510 x 287
(II) RADEONHD(0): Calling BlankCRTC
(II) RADEONHD(0): BlankCRTC Successful
(II) RADEONHD(0): Calling BlankCRTC
(II) RADEONHD(0): BlankCRTC Successful
(EE) config/hal: couldn't initialise context: unknown error (null)
(II) config/hal: Adding input device product 0x0200
(II) LoadModule: "mouse"
(II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) product 0x0200: Device: "/dev/sysmouse"
(==) product 0x0200: Protocol: "Auto"
(**) product 0x0200: always reports core events
(**) Option "Device" "/dev/sysmouse"
(==) product 0x0200: Emulate3Buttons, Emulate3Timeout: 50
(**) product 0x0200: ZAxisMapping: buttons 4 and 5
(**) product 0x0200: Buttons: 9
(**) product 0x0200: Sensitivity: 1
(II) XINPUT: Adding extended input device "product 0x0200" (type: MOUSE)
(**) product 0x0200: (accel) keeping acceleration scheme 1
(**) product 0x0200: (accel) filter chain progression: 2.00
(**) product 0x0200: (accel) filter stage 0: 20.00 ms
(**) product 0x0200: (accel) set acceleration profile 0
(II) product 0x0200: SetupAuto: hw.iftype is 4, hw.model is 0
(II) product 0x0200: SetupAuto: protocol is SysMouse
(II) config/hal: Adding input device product 0x0200
(II) LoadModule: "kbd"
(II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) product 0x0200: always reports core events
(**) Option "Protocol" "standard"
(**) product 0x0200: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) product 0x0200: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) product 0x0200: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) product 0x0200: XkbLayout: "us"
(**) Option "XkbOptions" "terminate:ctrl_alt_bksp"
(**) product 0x0200: XkbOptions: "terminate:ctrl_alt_bksp"
(**) Option "CustomKeycodes" "off"
(**) product 0x0200: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "product 0x0200" (type: KEYBOARD)
(WW) RADEONHD(0): DRMCPIdle: DRM CP IDLE returned BUSY!
(WW) RADEONHD(0): DRMCPIdle: DRM CP IDLE returned BUSY!
(WW) RADEONHD(0): DRMCPIdle: DRM CP IDLE returned BUSY!
(WW) RADEONHD(0): DRMCPIdle: DRM CP IDLE returned BUSY!
(WW) RADEONHD(0): DRMCPIdle: DRM CP IDLE returned BUSY!
(WW) RADEONHD(0): DRMCPIdle: DRM CP IDLE returned BUSY!
More information about the freebsd-x11
mailing list