Problems with hardware rendering on i865
Robert Noland
rnoland at FreeBSD.org
Thu Jan 29 08:22:38 PST 2009
On Thu, 2009-01-29 at 06:14 -0800, Kirill Yelizarov wrote:
> Robert,
> I'm running:
> FreeBSD mysrv.faberlic.com 7.1-STABLE FreeBSD 7.1-STABLE #0: Wed Jan 28 16:46:24 MSK 2009 root at mysrv.faberlic.com:/usr/obj/usr/src/sys/MYSRV i386
>
> all ports are up to date Jan 29 2009
>
> what other information may help you?
Thats it for now, until I can find time to put together a version of agp
with some more debugging...
robert.
> Regards,
> Kirill
>
> --- On Thu, 1/29/09, Robert Noland <rnoland at FreeBSD.org> wrote:
>
> > From: Robert Noland <rnoland at FreeBSD.org>
> > Subject: Re: Problems with hardware rendering on i865
> > To: ykirill at yahoo.com
> > Cc: freebsd-x11 at freebsd.org
> > Date: Thursday, January 29, 2009, 4:17 PM
> > On Thu, 2009-01-29 at 00:17 -0800, Kirill Yelizarov wrote:
> > > Robert,
> > > I tried tiling off but got another error:
> >
> > This makes me suspect that something is still wrong with
> > 855 and now
> > apparrently 865 agp... It may be something wrong with the
> > way the
> > driver is requesting memory from agp, but I'll still
> > need a debugging
> > version of agp to figure it out. Which FreeBSD version are
> > you running?
> >
> > robert.
> >
> > > (II) Loading /usr/local/lib/xorg/modules//libvgahw.so
> > > (II) Module vgahw: vendor="X.Org Foundation"
> > > compiled for 1.5.3, module version = 0.1.0
> > > ABI class: X.Org Video Driver, version 4.1
> > > (**) intel(0): Depth 24, (--) framebuffer bpp 32
> > > (==) intel(0): RGB weight 888
> > > (==) intel(0): Default visual is TrueColor
> > > (**) intel(0): Option "AccelMethod"
> > "EXA"
> > > (**) intel(0): Option "DRI" "true"
> > > (**) intel(0): Option "Tiling"
> > "off"
> > > (II) intel(0): Integrated Graphics Chipset: Intel(R)
> > 865G
> > > (--) intel(0): Chipset: "865G"
> > > (--) intel(0): Linear framebuffer at 0xF0000000
> > > (--) intel(0): IO registers at addr 0xFFA80000
> > > (**) intel(0): Using EXA for acceleration
> > > (II) intel(0): 1 display pipe available.
> > > (II) Loading sub module "ddc"
> > > (II) LoadModule: "ddc"
> > > (II) Module "ddc" already built-in
> > > (II) Loading sub module "i2c"
> > > (II) LoadModule: "i2c"
> > > (II) Module "i2c" already built-in
> > > (II) intel(0): Output VGA using monitor section Sony
> > > (II) intel(0): I2C bus "DVODDC_D"
> > initialized.
> > > (II) Loading sub module "sil164"
> > > (II) LoadModule: "sil164"
> > >
> > > (II) Loading
> > /usr/local/lib/xorg/modules/drivers//sil164.so
> > > (II) Module sil164: vendor="X.Org
> > Foundation"
> > > compiled for 1.5.3, module version = 1.0.0
> > > ABI class: X.Org Video Driver, version 4.1
> > > (II) intel(0): I2C bus "DVOI2C_E"
> > initialized.
> > > (II) Loading sub module "ch7xxx"
> > > (II) LoadModule: "ch7xxx"
> > >
> > > (II) Loading
> > /usr/local/lib/xorg/modules/drivers//ch7xxx.so
> > > (II) Module ch7xxx: vendor="X.Org
> > Foundation"
> > > compiled for 1.5.3, module version = 1.0.0
> > > ABI class: X.Org Video Driver, version 4.1
> > > (II) intel(0): I2C bus "DVOI2C_E" removed.
> > > (II) intel(0): I2C bus "DVOI2C_E"
> > initialized.
> > > (II) Loading sub module "ivch"
> > > (II) LoadModule: "ivch"
> > >
> > > (II) Loading
> > /usr/local/lib/xorg/modules/drivers//ivch.so
> > > (II) Module ivch: vendor="X.Org Foundation"
> > > compiled for 1.5.3, module version = 1.0.0
> > > ABI class: X.Org Video Driver, version 4.1
> > > (II) intel(0): I2C bus "DVOI2C_E" removed.
> > > (II) intel(0): I2C bus "DVOI2C_B"
> > initialized.
> > > (II) Loading sub module "tfp410"
> > > (II) LoadModule: "tfp410"
> > >
> > > (II) Loading
> > /usr/local/lib/xorg/modules/drivers//tfp410.so
> > > (II) Module tfp410: vendor="X.Org
> > Foundation"
> > > compiled for 1.5.3, module version = 1.0.0
> > > ABI class: X.Org Video Driver, version 4.1
> > > (II) intel(0): I2C bus "DVOI2C_B" removed.
> > > (II) intel(0): I2C bus "DVOI2C_E"
> > initialized.
> > > (II) Loading sub module "ch7017"
> > > (II) LoadModule: "ch7017"
> > >
> > > ....
> > > (II) Loading sub module "fb"
> > > (II) LoadModule: "fb"
> > >
> > > (II) Loading /usr/local/lib/xorg/modules//libfb.so
> > > (II) Module fb: vendor="X.Org Foundation"
> > > compiled for 1.5.3, module version = 1.0.0
> > > ABI class: X.Org ANSI C Emulation, version 0.4
> > > (II) Loading sub module "exa"
> > > (II) LoadModule: "exa"
> > >
> > > (II) Loading /usr/local/lib/xorg/modules//libexa.so
> > > (II) Module exa: vendor="X.Org Foundation"
> > > compiled for 1.5.3, module version = 2.4.0
> > > ABI class: X.Org Video Driver, version 4.1
> > > (II) Loading sub module "ramdac"
> > > (II) LoadModule: "ramdac"
> > > (II) Module "ramdac" already built-in
> > > (II) intel(0): Comparing regs from server start up to
> > After PreInit
> > > (II) Loading sub module "dri"
> > > (II) LoadModule: "dri"
> > >
> > > (II) Reloading
> > /usr/local/lib/xorg/modules/extensions//libdri.so
> > > (==) Depth 24 pixmap format is 32 bpp
> > > (II) do I need RAC? No, I don't.
> > > (II) resource ranges after preInit:
> > > [0] -1 0 0x00100000 - 0x3fffffff
> > (0x3ff00000) MX[B]E(B)
> > > [1] -1 0 0x000f0000 - 0x000fffff (0x10000)
> > MX[B]
> > > [2] -1 0 0x000c0000 - 0x000effff (0x30000)
> > MX[B]
> > > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000)
> > MX[B]
> > > [4] 0 0 0x000a0000 - 0x000affff (0x10000)
> > MS[B](OprD)
> > > [5] 0 0 0x000b0000 - 0x000b7fff (0x8000)
> > MS[B](OprD)
> > > [6] 0 0 0x000b8000 - 0x000bffff (0x8000)
> > MS[B](OprD)
> > > [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> > > [8] -1 0 0x00000000 - 0x000000ff (0x100)
> > IX[B]
> > > [9] 0 0 0x000003b0 - 0x000003bb (0xc)
> > IS[B](OprU)
> > > [10] 0 0 0x000003c0 - 0x000003df (0x20)
> > IS[B](OprU)
> > > (II) intel(0): Kernel reported 241152 total, 0 used
> > > (II) intel(0): I830CheckAvailableMemory: 964608 kB
> > available
> > > drmOpenDevice: node name is /dev/dri/card0
> > > drmOpenDevice: open result is 10, (OK)
> > > drmOpenDevice: node name is /dev/dri/card0
> > > drmOpenDevice: open result is 10, (OK)
> > > drmOpenByBusid: Searching for BusID pci:0000:00:02.0
> > > drmOpenDevice: node name is /dev/dri/card0
> > > drmOpenDevice: open result is 10, (OK)
> > > drmOpenByBusid: drmOpenMinor returns 10
> > > drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
> > > (II) [drm] DRM interface version 1.2
> > > (II) [drm] DRM open master succeeded.
> > > (II) intel(0): [drm] Using the DRM lock SAREA also for
> > drawables.
> > > (II) intel(0): [drm] framebuffer mapped by ddx driver
> > > (II) intel(0): [drm] added 1 reserved context for
> > kernel
> > > (II) intel(0): X context handle = 0x2
> > > (II) intel(0): [drm] installed DRM signal handler
> > > (**) intel(0): Framebuffer compression disabled
> > > (**) intel(0): Tiling disabled
> > > (==) intel(0): VideoRam: 131072 KB
> > > (II) intel(0): Attempting memory allocation with
> > untiled buffers.
> > > (WW) intel(0): Failed to allocate texture space.
> > > (II) intel(0): Untiled allocation failed.
> > > (II) intel(0): Couldn't allocate 3D memory,
> > disabling DRI.
> > > (II) intel(0): Attempting memory allocation with
> > untiled buffers.
> > > (II) intel(0): Untiled allocation successful.
> > > (II) intel(0): Page Flipping disabled
> > > (II) intel(0): vgaHWGetIOBase: hwp->IOBase is
> > 0x03d0, hwp->PIOOffset is 0x0000
> > > (==) intel(0): Write-combining range (0xa0000,0x10000)
> > was already clear
> > > (**) intel(0): Option "MigrationHeuristic"
> > "greedy"
> > > (**) intel(0): Option "EXANoComposite"
> > "false"
> > > (II) EXA(0): Offscreen pixmap area of 50135040 bytes
> > > (II) EXA(0): Driver registered support for the
> > following operations:
> > > (II) Solid
> > > (II) Copy
> > > (II) Composite (RENDER acceleration)
> > > (==) intel(0): Backing store disabled
> > > (==) intel(0): Silken mouse enabled
> > > (II) intel(0): Initializing HW Cursor
> > > (II) intel(0): xf86BindGARTMemory: bind key 19 at
> > 0x00fdf000 (pgoffset 4063)
> > > (II) intel(0): xf86BindGARTMemory: bind key 20 at
> > 0x00fe0000 (pgoffset 4064)
> > > (II) intel(0): xf86BindGARTMemory: bind key 21 at
> > 0x01fd0000 (pgoffset 8144)
> > > (II) intel(0): Fixed memory allocation layout:
> > > (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128
> > kB)
> > > (II) intel(0): 0x00020000-0x00024fff: HW cursors (20
> > kB)
> > > (II) intel(0): 0x00025000-0x0002cfff: logical 3D
> > context (32 kB)
> > > (II) intel(0): 0x0002d000-0x0012cfff: fake bufmgr
> > (1024 kB)
> > > (II) intel(0): 0x00fdf000: end of stolen
> > memory
> > > (II) intel(0): 0x00fdf000-0x00fdffff: overlay
> > registers (4 kB, 0x0000000011be9000 physical
> > > )
> > > (II) intel(0): 0x00fe0000-0x01fcffff: front buffer
> > (16320 kB)
> > > (II) intel(0): 0x01fd0000-0x04f9ffff: exa offscreen
> > (48960 kB)
> > > (II) intel(0): 0x08000000: end of aperture
> > > (II) intel(0): Output configuration:
> > > (II) intel(0): Pipe A is on
> > > (II) intel(0): Display plane A is now enabled and
> > connected to pipe A.
> > > (II) intel(0): Output VGA is connected to pipe A
> > > (II) intel(0): RandR 1.2 enabled, ignore the following
> > RandR disabled message.
> > > (**) Option "dpms" "true"
> > > (**) intel(0): DPMS enabled
> > > (II) intel(0): Set up overlay video
> > > (II) intel(0): direct rendering: Failed
> > > (--) RandR disabled
> > > (II) Initializing built-in extension MIT-SHM
> > > (II) Initializing built-in extension XInputExtension
> > > (II) Initializing built-in extension XTEST
> > > (II) Initializing built-in extension XKEYBOARD
> > > (II) Initializing built-in extension XINERAMA
> > > (II) Initializing built-in extension XFIXES
> > > (II) Initializing built-in extension RENDER
> > > (II) Initializing built-in extension RANDR
> > > (II) Initializing built-in extension COMPOSITE
> > > (II) Initializing built-in extension DAMAGE
> > > (II) Initializing built-in extension XEVIE
> > > drmOpenDevice: node name is /dev/dri/card0
> > > drmOpenDevice: open result is 11, (OK)
> > > drmOpenByBusid: Searching for BusID pci:0000:00:02.0
> > > drmOpenDevice: node name is /dev/dri/card0
> > > drmOpenDevice: open result is 11, (OK)
> > > drmOpenByBusid: drmOpenMinor returns 11
> > > drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
> > > (EE) AIGLX error: Calling driver entry point
> > failed(EE) AIGLX: reverting to software rendering
> > > (II) AIGLX: Loaded and initialized
> > /usr/local/lib/dri/swrast_dri.so
> > > (II) GLX: Initialized DRISWRAST GL provider for screen
> > 0
> > > (II) intel(0): Setting screen physical size to 359 x
> > 287
> > > (II) config/hal: Adding input device AT Keyboard
> > > (II) LoadModule: "kbd"
> > >
> > > Regards,
> > > Kirill
> > >
> > >
> > >
> > > --- On Wed, 1/28/09, Robert Noland
> > <rnoland at FreeBSD.org> wrote:
> > >
> > > > From: Robert Noland <rnoland at FreeBSD.org>
> > > > Subject: Re: Problems with hardware rendering on
> > i865
> > > > To: ykirill at yahoo.com
> > > > Cc: freebsd-x11 at freebsd.org
> > > > Date: Wednesday, January 28, 2009, 7:09 PM
> > > > On Wed, 2009-01-28 at 06:33 -0800, Kirill
> > Yelizarov wrote:
> > > > > Hi
> > > > >
> > > > > I have problems with hardware rendering
> > configuration.
> > > > I have all recent updates of Releng-7 and ports
> > (xorg-7.4).
> > > > glxgears shows about 28fps when full screen. How
> > can i
> > > > enable hardware rendering or i'm just wasting
> > my time
> > > > with this card? Any hints?
> > > > >
> > > > > Thank You,
> > > > > Kirill
> > > > >
> > > > > P.S. Sorry, this letter is big
> > > > >
> > > > > Here is dmesg:
> > > > > Copyright (c) 1992-2009 The FreeBSD Project.
> > > > > Copyright (c) 1979, 1980, 1983, 1986, 1988,
> > 1989,
> > > > 1991, 1992, 1993, 1994
> > > > > The Regents of the University of
> > California. All
> > > > rights reserved.
> > > > > FreeBSD is a registered trademark of The
> > FreeBSD
> > > > Foundation.
> > > > > FreeBSD 7.1-STABLE #0: Wed Jan 28 16:46:24
> > MSK 2009
> > > > >
> > root at mysrv.faberlic.com:/usr/obj/usr/src/sys/MYSRV
> > > > > Timecounter "i8254" frequency
> > 1193182 Hz
> > > > quality 0
> > > > > CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz
> > (2992.52-MHz
> > > > 686-class CPU)
> > > > > Origin = "GenuineIntel" Id =
> > 0xf41
> > > > Stepping = 1
> > > > >
> > > >
> > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> > > > >
> > > >
> > Features2=0x441d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,xTPR>
> > > > > Logical CPUs per core: 2
> > > > > real memory = 1056108544 (1007 MB)
> > > > > avail memory = 1023971328 (976 MB)
> > > > > ACPI APIC Table: <INTEL D865GVHZ>
> > > > > FreeBSD/SMP: Multiprocessor System Detected:
> > 2 CPUs
> > > > > cpu0 (BSP): APIC ID: 0
> > > > > cpu1 (AP): APIC ID: 1
> > > > > ioapic0 <Version 2.0> irqs 0-23 on
> > motherboard
> > > > > netsmb_dev: loaded
> > > > > kbd1 at kbdmux0
> > > > > acpi0: <INTEL D865GVHZ> on motherboard
> > > > > acpi0: [ITHREAD]
> > > > > acpi0: Power Button (fixed)
> > > > > acpi0: reservation of 0, a0000 (3) failed
> > > > > acpi0: reservation of 100000, 3ef00000 (3)
> > failed
> > > > > Timecounter "ACPI-fast" frequency
> > 3579545 Hz
> > > > quality 1000
> > > > > acpi_timer0: <24-bit timer at
> > 3.579545MHz> port
> > > > 0x408-0x40b on acpi0
> > > > > pcib0: <ACPI Host-PCI bridge> port
> > 0xcf8-0xcff
> > > > on acpi0
> > > > > pci0: <ACPI PCI bus> on pcib0
> > > > > vgapci0: <VGA-compatible display> port
> > > > 0xec00-0xec07 mem
> > > > 0xf0000000-0xf7ffffff,0xffa80000-0xffafffff irq
> > 16 at device
> > > > 2.0 on pci0
> > > > > agp0: <Intel 82865G (865G GMCH) SVGA
> > controller>
> > > > on vgapci0
> > > > > agp0: detected 16252k stolen memory
> > > > > agp0: aperture size is 128M
> > > > > drm0: <Intel i865G GMCH> on vgapci0
> > > > > vgapci0: child drm0 requested
> > pci_enable_busmaster
> > > > > info: [drm] AGP at 0xf0000000 128MB
> > > > > info: [drm] Initialized i915 1.6.0 20080730
> > > > > ... I removed the rest of dmesg to save
> > space
> > > > >
> > > > > My xorg.conf:
> > > > > Section "Module"
> > > > > Load "dbe" #
> > Double buffer extension
> > > > > Load "GLcore"
> > > > > Load "freetype"
> > > > > Load "glx"
> > > > > Load "dri"
> > > > > EndSection
> > > > >
> > > > > Section "Files"
> > > > >
> > > > FontPath
> > "/usr/local/lib/X11/fonts/winfonts/"
> > > > >
> > > > FontPath
> > "/usr/local/lib/X11/fonts/koi8-1/misc/"
> > > > >
> > > > FontPath
> > "/usr/local/lib/X11/fonts/koi8-1/75dpi/"
> > > > > FontPath
> > "/usr/local/lib/X11/fonts/misc/"
> > > > > FontPath
> > "/usr/local/lib/X11/fonts/URW/"
> > > > > EndSection
> > > > >
> > > > > Section "ServerFlags"
> > > > >
> > > > > EndSection
> > > > >
> > > > > Section "Monitor"
> > > > > Identifier "Sony"
> > > > > HorizSync 31.5 - 85.0
> > > > > VertRefresh 50-70
> > > > > Option "DPMS"
> > "true"
> > > > > EndSection
> > > > >
> > > > > Section "Device"
> > > > > Identifier "I865"
> > > > > Driver "intel"
> > > > > VendorName "Intel
> > Corporation"
> > > > > Option "DRI"
> > "true"
> > > > > # Option "AccelMethod"
> > "NONE"
> > > > > Option "AccelMethod"
> > "EXA"
> > > > > Option
> > "MigrationHeuristic"
> > > > "greedy"
> > > > > Option "ExaNoComposite"
> > "false"
> > > > > EndSection
> > > > >
> > > > > Section "Screen"
> > > > > Identifier "LCD_Screen"
> > > > > Device "I865"
> > > > > Monitor "Sony"
> > > > > DefaultDepth 24
> > > > >
> > > > > Subsection "Display"
> > > > > Depth 24
> > > > > Modes "1280x1024"
> > > > > ViewPort 0 0
> > > > > Virtual 2040 2040
> > > > > EndSubsection
> > > > > EndSection
> > > > >
> > > > > Section "ServerLayout"
> > > > > Identifier "Simple Layout"
> > > > > Option "AIGLX"
> > "true"
> > > > > Screen "LCD_Screen"
> > > > > EndSection
> > > > >
> > > > > Section "DRI"
> > > > > Group 0
> > > > > Mode 0666
> > > > > EndSection
> > > > >
> > > > > Section "Extensions"
> > > > > Option "Composite"
> > "Enable"
> > > > > Option "RENDER"
> > "Enable"
> > > > > Option "DAMAGE"
> > "Enable"
> > > > > EndSection
> > > > >
> > > > >
> > > > > And here is Xorg log:
> > > > > X.Org X Server 1.5.3
> > > > > Release Date: 5 November 2008
> > > > > X Protocol Version 11, Revision 0
> > > > > Build Operating System: FreeBSD 7.1-STABLE
> > i386
> > > > > Current Operating System: FreeBSD
> > mysrv.faberlic.com
> > > > 7.1-STABLE FreeBSD 7.1-STABLE #0: Wed Jan 28
> > 16:46:24 MSK
> > > > 2009
> > root at mysrv.faberlic.com:/usr/obj/usr/src/sys/MYSRV
> > > > i386
> > > > > Build Date: 28 January 2009 12:25:29PM
> > > > >
> > > > > Before reporting problems, check
> > http://wiki.x.org
> > > > > to make sure that you have the latest
> > version.
> > > > > Markers: (--) probed, (**) from config file,
> > (==)
> > > > default setting,
> > > > > (++) from command line, (!!) notice,
> > (II)
> > > > informational,
> > > > > (WW) warning, (EE) error, (NI) not
> > implemented, (??)
> > > > unknown.
> > > > > (==) Log file:
> > "/var/log/Xorg.0.log", Time:
> > > > Wed Jan 28 17:04:03 2009
> > > > > (==) Using config file:
> > "/etc/X11/xorg.conf"
> > > > > (==) ServerLayout "Simple Layout"
> > > > > (**) |-->Screen "LCD_Screen"
> > (0)
> > > > > (**) | |-->Monitor "Sony"
> > > > > (**) | |-->Device "I865"
> > > > > (**) Option "AIGLX"
> > "true"
> > > > > (==) Automatically adding devices
> > > > > (==) Automatically enabling devices
> > > > > (==) Including the default font path
> > > >
> > /usr/local/lib/X11/fonts/misc/,/usr/local/lib/X11/fonts/TTF/,/usr/local/lib/X11/fonts/OTF,/usr/local/lib/X11/fonts/Type1/,/usr/local/lib/X11/fonts/100dpi/,/usr/local/lib/X11/fonts/75dpi/.
> > > > > (**) FontPath set to:
> > > > > /usr/local/lib/X11/fonts/winfonts/,
> > > > > /usr/local/lib/X11/fonts/koi8-1/misc/,
> > > > > /usr/local/lib/X11/fonts/koi8-1/75dpi/,
> > > > > /usr/local/lib/X11/fonts/misc/,
> > > > > /usr/local/lib/X11/fonts/URW/,
> > > > > /usr/local/lib/X11/fonts/misc/,
> > > > > /usr/local/lib/X11/fonts/TTF/,
> > > > > /usr/local/lib/X11/fonts/OTF,
> > > > > /usr/local/lib/X11/fonts/Type1/,
> > > > > /usr/local/lib/X11/fonts/100dpi/,
> > > > > /usr/local/lib/X11/fonts/75dpi/
> > > > > (==) ModulePath set to
> > > > "/usr/local/lib/xorg/modules"
> > > > > (**) Extension "Composite" is
> > enabled
> > > > > (**) Extension "RENDER" is enabled
> > > > > (**) Extension "DAMAGE" is enabled
> > > > > (II) Cannot locate a core pointer device.
> > > > > (II) Cannot locate a core keyboard device.
> > > > > (II) The server relies on HAL to provide the
> > list of
> > > > input devices.
> > > > > If no devices become available,
> > reconfigure HAL or
> > > > disable AllowEmptyInput.
> > > > > (II) Loader magic: 0x81ab3c0
> > > > > (II) Module ABI versions:
> > > > > X.Org ANSI C Emulation: 0.4
> > > > > X.Org Video Driver: 4.1
> > > > > X.Org XInput driver : 2.1
> > > > > X.Org Server Extension : 1.1
> > > > > X.Org Font Renderer : 0.6
> > > > > (II) Loader running on freebsd
> > > > > (--) Using syscons driver with X support
> > (version 2.0)
> > > > > (--) using VT number 9
> > > > >
> > > > > (--) PCI:*(0 at 0:2:0) Intel Corporation 82865G
> > > > Integrated Graphics Controller rev 0, Mem @
> > 0xf0000000/0,
> > > > 0xffa80000/0, I/O @ 0x0000ec00/0, BIOS @
> > 0x????????/65536
> > > > > (II) System resource ranges:
> > > > > [0] -1 0 0x00100000 - 0x3fffffff
> > (0x3ff00000)
> > > > MX[B]E(B)
> > > > > [1] -1 0 0x000f0000 - 0x000fffff
> > (0x10000) MX[B]
> > > > > [2] -1 0 0x000c0000 - 0x000effff
> > (0x30000) MX[B]
> > > > > [3] -1 0 0x00000000 - 0x0009ffff
> > (0xa0000) MX[B]
> > > > > [4] -1 0 0x0000ffff - 0x0000ffff
> > (0x1) IX[B]
> > > > > [5] -1 0 0x00000000 - 0x000000ff
> > (0x100) IX[B]
> > > > > (II) "extmod" will be loaded by
> > default.
> > > > > (II) "dbe" will be loaded. This
> > was enabled
> > > > by default and also specified in the config file.
> > > > > (II) "glx" will be loaded. This
> > was enabled
> > > > by default and also specified in the config file.
> > > > > (II) "freetype" will be loaded.
> > This was
> > > > enabled by default and also specified in the
> > config file.
> > > > > (II) "record" will be loaded by
> > default.
> > > > > (II) "dri" will be loaded. This
> > was enabled
> > > > by default and also specified in the config file.
> > > > > (II) LoadModule: "dbe"
> > > > >
> > > > > (II) Loading
> > > > /usr/local/lib/xorg/modules/extensions//libdbe.so
> > > > > (II) Module dbe: vendor="X.Org
> > Foundation"
> > > > > compiled for 1.5.3, module version =
> > 1.0.0
> > > > > Module class: X.Org Server Extension
> > > > > ABI class: X.Org Server Extension,
> > version 1.1
> > > > > (II) Loading extension DOUBLE-BUFFER
> > > > > (II) LoadModule: "freetype"
> > > > >
> > > > > (II) Loading
> > > > /usr/local/lib/xorg/modules/fonts//libfreetype.so
> > > > > (II) Module freetype: vendor="X.Org
> > Foundation
> > > > & the After X-TT Project"
> > > > > compiled for 1.5.3, module version =
> > 2.1.0
> > > > > Module class: X.Org Font Renderer
> > > > > ABI class: X.Org Font Renderer, version
> > 0.6
> > > > > (II) Loading font FreeType
> > > > > (II) LoadModule: "glx"
> > > > >
> > > > > (II) Loading
> > > > /usr/local/lib/xorg/modules/extensions//libglx.so
> > > > > (II) Module glx: vendor="X.Org
> > Foundation"
> > > > > compiled for 1.5.3, module version =
> > 1.0.0
> > > > > ABI class: X.Org Server Extension,
> > version 1.1
> > > > > (**) AIGLX enabled
> > > > > (**) Exporting typical set of GLX visuals
> > > > > (II) Loading extension GLX
> > > > > (II) LoadModule: "dri"
> > > > >
> > > > > (II) Loading
> > > > /usr/local/lib/xorg/modules/extensions//libdri.so
> > > > > (II) Module dri: vendor="X.Org
> > Foundation"
> > > > > compiled for 1.5.3, module version =
> > 1.0.0
> > > > > ABI class: X.Org Server Extension,
> > version 1.1
> > > > > (II) Loading extension XFree86-DRI
> > > > > (II) LoadModule: "extmod"
> > > > >
> > > > > (II) Loading
> > > >
> > /usr/local/lib/xorg/modules/extensions//libextmod.so
> > > > > (II) Module extmod: vendor="X.Org
> > > > Foundation"
> > > > > compiled for 1.5.3, module version =
> > 1.0.0
> > > > > Module class: X.Org Server Extension
> > > > > ABI class: X.Org Server Extension,
> > version 1.1
> > > > > (II) Loading extension SHAPE
> > > > > (II) Loading extension
> > MIT-SUNDRY-NONSTANDARD
> > > > > (II) Loading extension BIG-REQUESTS
> > > > > (II) Loading extension SYNC
> > > > > (II) Loading extension MIT-SCREEN-SAVER
> > > > > (II) Loading extension XC-MISC
> > > > > (II) Loading extension
> > XFree86-VidModeExtension
> > > > > (II) Loading extension XFree86-Misc
> > > > > (II) Loading extension XFree86-DGA
> > > > > (II) Loading extension DPMS
> > > > > (II) Loading extension TOG-CUP
> > > > > (II) Loading extension
> > Extended-Visual-Information
> > > > > (II) Loading extension XVideo
> > > > > (II) Loading extension
> > XVideo-MotionCompensation
> > > > > (II) Loading extension X-Resource
> > > > > (II) LoadModule: "record"
> > > > >
> > > > > (II) Loading
> > > >
> > /usr/local/lib/xorg/modules/extensions//librecord.so
> > > > > (II) Module record: vendor="X.Org
> > > > Foundation"
> > > > > compiled for 1.5.3, module version =
> > 1.13.0
> > > > > Module class: X.Org Server Extension
> > > > > ABI class: X.Org Server Extension,
> > version 1.1
> > > > > (II) Loading extension RECORD
> > > > > (II) LoadModule: "intel"
> > > > >
> > > > > (II) Loading
> > > > /usr/local/lib/xorg/modules/drivers//intel_drv.so
> > > > > (II) Module intel: vendor="X.Org
> > Foundation"
> > > > > compiled for 1.5.3, module version =
> > 2.5.1
> > > > > Module class: X.Org Video Driver
> > > > > ABI class: X.Org Video Driver, version
> > 4.1
> > > > > (II) intel: Driver for Intel Integrated
> > Graphics
> > > > Chipsets: i810,
> > > > > i810-dc100, i810e, i815, i830M, 845G,
> > 852GM/855GM,
> > > > 865G, 915G,
> > > > > E7221 (i915), 915GM, 945G, 945GM,
> > 945GME, 965G, G35,
> > > > 965Q, 946GZ,
> > > > > 965GM, 965GME/GLE, G33, Q35, Q33,
> > > > > Mobile Intel\u00ae GM45 Express
> > Chipset,
> > > > > Intel Integrated Graphics Device,
> > G45/G43, Q45/Q43,
> > > > G41
> > > > > (II) Primary Device is: PCI 00 at 00:02:0
> > > > > (II) resource ranges after
> > xf86ClaimFixedResources()
> > > > call:
> > > > > [0] -1 0 0x00100000 - 0x3fffffff
> > (0x3ff00000)
> > > > MX[B]E(B)
> > > > > [1] -1 0 0x000f0000 - 0x000fffff
> > (0x10000) MX[B]
> > > > > [2] -1 0 0x000c0000 - 0x000effff
> > (0x30000) MX[B]
> > > > > [3] -1 0 0x00000000 - 0x0009ffff
> > (0xa0000) MX[B]
> > > > > [4] -1 0 0x0000ffff - 0x0000ffff
> > (0x1) IX[B]
> > > > > [5] -1 0 0x00000000 - 0x000000ff
> > (0x100) IX[B]
> > > > > (II) resource ranges after probing:
> > > > > [0] -1 0 0x00100000 - 0x3fffffff
> > (0x3ff00000)
> > > > MX[B]E(B)
> > > > > [1] -1 0 0x000f0000 - 0x000fffff
> > (0x10000) MX[B]
> > > > > [2] -1 0 0x000c0000 - 0x000effff
> > (0x30000) MX[B]
> > > > > [3] -1 0 0x00000000 - 0x0009ffff
> > (0xa0000) MX[B]
> > > > > [4] 0 0 0x000a0000 - 0x000affff
> > (0x10000) MS[B]
> > > > > [5] 0 0 0x000b0000 - 0x000b7fff
> > (0x8000) MS[B]
> > > > > [6] 0 0 0x000b8000 - 0x000bffff
> > (0x8000) MS[B]
> > > > > [7] -1 0 0x0000ffff - 0x0000ffff
> > (0x1) IX[B]
> > > > > [8] -1 0 0x00000000 - 0x000000ff
> > (0x100) IX[B]
> > > > > [9] 0 0 0x000003b0 - 0x000003bb
> > (0xc) IS[B]
> > > > > [10] 0 0 0x000003c0 - 0x000003df
> > (0x20) IS[B]
> > > > > (II) Loading sub module "vgahw"
> > > > > (II) LoadModule: "vgahw"
> > > > >
> > > > > (II) Loading
> > /usr/local/lib/xorg/modules//libvgahw.so
> > > > > (II) Module vgahw: vendor="X.Org
> > Foundation"
> > > > > compiled for 1.5.3, module version =
> > 0.1.0
> > > > > ABI class: X.Org Video Driver, version
> > 4.1
> > > > > (**) intel(0): Depth 24, (--) framebuffer
> > bpp 32
> > > > > (==) intel(0): RGB weight 888
> > > > > (==) intel(0): Default visual is TrueColor
> > > > > (**) intel(0): Option
> > "AccelMethod"
> > > > "EXA"
> > > > > (**) intel(0): Option "DRI"
> > "true"
> > > > > (II) intel(0): Integrated Graphics Chipset:
> > Intel(R)
> > > > 865G
> > > > > (--) intel(0): Chipset: "865G"
> > > > > (--) intel(0): Linear framebuffer at
> > 0xF0000000
> > > > > (--) intel(0): IO registers at addr
> > 0xFFA80000
> > > > > (**) intel(0): Using EXA for acceleration
> > > > > (II) intel(0): 1 display pipe available.
> > > > > (II) Loading sub module "ddc"
> > > > > (II) LoadModule: "ddc"
> > > > > (II) Module "ddc" already built-in
> > > > > (II) Loading sub module "i2c"
> > > > > (II) LoadModule: "i2c"
> > > > > (II) Module "i2c" already built-in
> > > > > (II) intel(0): Output VGA using monitor
> > section Sony
> > > > > (II) intel(0): I2C bus "DVODDC_D"
> > > > initialized.
> > > > > (II) Loading sub module "sil164"
> > > > > (II) LoadModule: "sil164"
> > > > >
> > > > > (II) Loading
> > > > /usr/local/lib/xorg/modules/drivers//sil164.so
> > > > > (II) Module sil164: vendor="X.Org
> > > > Foundation"
> > > > > compiled for 1.5.3, module version =
> > 1.0.0
> > > > > ABI class: X.Org Video Driver, version
> > 4.1
> > > > > (II) intel(0): I2C bus "DVOI2C_E"
> > > > initialized.
> > > > > (II) Loading sub module "ch7xxx"
> > > > > (II) LoadModule: "ch7xxx"
> > > > >
> > > > > (II) Loading
> > > > /usr/local/lib/xorg/modules/drivers//ch7xxx.so
> > > > > (II) Module ch7xxx: vendor="X.Org
> > > > Foundation"
> > > > > compiled for 1.5.3, module version =
> > 1.0.0
> > > > > ABI class: X.Org Video Driver, version
> > 4.1
> > > > > (II) intel(0): I2C bus "DVOI2C_E"
> > removed.
> > > > > (II) intel(0): I2C bus "DVOI2C_E"
> > > > initialized.
> > > > > (II) Loading sub module "ivch"
> > > > > (II) LoadModule: "ivch"
> > > > >
> > > > > (II) Loading
> > > > /usr/local/lib/xorg/modules/drivers//ivch.so
> > > > > (II) Module ivch: vendor="X.Org
> > Foundation"
> > > > > compiled for 1.5.3, module version =
> > 1.0.0
> > > > > ABI class: X.Org Video Driver, version
> > 4.1
> > > > > (II) intel(0): I2C bus "DVOI2C_E"
> > removed.
> > > > > (II) intel(0): I2C bus "DVOI2C_B"
> > > > initialized.
> > > > > (II) Loading sub module "tfp410"
> > > > > (II) LoadModule: "tfp410"
> > > > >
> > > > > (II) Loading
> > > > /usr/local/lib/xorg/modules/drivers//tfp410.so
> > > > > (II) Module tfp410: vendor="X.Org
> > > > Foundation"
> > > > > compiled for 1.5.3, module version =
> > 1.0.0
> > > > > ABI class: X.Org Video Driver, version
> > 4.1
> > > > > (II) intel(0): I2C bus "DVOI2C_B"
> > removed.
> > > > > (II) intel(0): I2C bus "DVOI2C_E"
> > > > initialized.
> > > > > (II) Loading sub module "ch7017"
> > > > > (II) LoadModule: "ch7017"
> > > > >
> > > > > (II) Loading
> > > > /usr/local/lib/xorg/modules/drivers//ch7017.so
> > > > > (II) Module ch7017: vendor="X.Org
> > > > Foundation"
> > > > > compiled for 1.5.3, module version =
> > 1.0.0
> > > > > ABI class: X.Org Video Driver, version
> > 4.1
> > > > > (II) intel(0): I2C bus "DVOI2C_E"
> > removed.
> > > > > (II) intel(0): I2C bus "DVOI2C_E"
> > > > initialized.
> > > > > (II) intel(0): I2C bus "DVOI2C_E"
> > removed.
> > > > > (II) intel(0): I2C bus "DVODDC_D"
> > removed.
> > > > > (==) intel(0): Write-combining range
> > (0xa0000,0x10000)
> > > > was already clear
> > > > > (II) intel(0): I2C bus "CRTDDC_A"
> > > > initialized.
> > > > > (II) intel(0): I2C bus "CRTDDC_A"
> > removed.
> > > > > (II) intel(0): I2C bus "CRTDDC_A"
> > > > initialized.
> > > > > (II) intel(0): I2C device
> > "CRTDDC_A:ddc2"
> > > > registered at address 0xA0.
> > > > > (II) intel(0): I2C device
> > "CRTDDC_A:ddc2"
> > > > removed.
> > > > > (II) intel(0): I2C bus "CRTDDC_A"
> > removed.
> > > > > (II) intel(0): EDID vendor "SNY",
> > prod id
> > > > 10096
> > > > > (II) intel(0): Using hsync ranges from
> > config file
> > > > > (II) intel(0): Using vrefresh ranges from
> > config file
> > > > > (II) intel(0): Printing DDC gathered
> > Modelines:
> > > > > (II) intel(0): Modeline
> > "1280x1024"x0.0
> > > > 108.00 1280 1328 1440 1688 1024 1025 1028 1066
> > +hsync
> > > > +vsync (64.0 kHz)
> > > > > (II) intel(0): Modeline
> > "800x600"x0.0
> > > > 40.00 800 840 968 1056 600 601 605 628 +hsync
> > +vsync (37.9
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "640x480"x0.0
> > > > 31.50 640 656 720 840 480 481 484 500 -hsync
> > -vsync (37.5
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "640x480"x0.0
> > > > 31.50 640 664 704 832 480 489 491 520 -hsync
> > -vsync (37.9
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "640x480"x0.0
> > > > 25.20 640 656 752 800 480 490 492 525 -hsync
> > -vsync (31.5
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "720x400"x0.0
> > > > 28.32 720 738 846 900 400 412 414 449 -hsync
> > +vsync (31.5
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "1280x1024"x0.0
> > > > 135.00 1280 1296 1440 1688 1024 1025 1028 1066
> > +hsync
> > > > +vsync (80.0 kHz)
> > > > > (II) intel(0): Modeline
> > "1024x768"x0.0
> > > > 78.80 1024 1040 1136 1312 768 769 772 800
> > +hsync +vsync
> > > > (60.1 kHz)
> > > > > (II) intel(0): Modeline
> > "1024x768"x0.0
> > > > 75.00 1024 1048 1184 1328 768 771 777 806
> > -hsync -vsync
> > > > (56.5 kHz)
> > > > > (II) intel(0): Modeline
> > "1024x768"x0.0
> > > > 65.00 1024 1048 1184 1344 768 771 777 806
> > -hsync -vsync
> > > > (48.4 kHz)
> > > > > (II) intel(0): Modeline
> > "800x600"x0.0
> > > > 49.50 800 816 896 1056 600 601 604 625 +hsync
> > +vsync (46.9
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "800x600"x0.0
> > > > 50.00 800 856 976 1040 600 637 643 666 +hsync
> > +vsync (48.1
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "1280x1024"x60.0
> > > > 108.88 1280 1360 1496 1712 1024 1025 1028 1060
> > -hsync
> > > > +vsync (63.6 kHz)
> > > > > (II) intel(0): Modeline
> > "1280x960"x60.0
> > > > 102.10 1280 1360 1496 1712 960 961 964 994
> > -hsync +vsync
> > > > (59.6 kHz)
> > > > > (II) intel(0): EDID vendor "SNY",
> > prod id
> > > > 10096
> > > > > (II) intel(0): Output VGA connected
> > > > > (II) intel(0): Using user preference for
> > initial modes
> > > > > (II) intel(0): Output VGA using initial mode
> > 1280x1024
> > > > > (==) intel(0): Write-combining range
> > (0xa0000,0x10000)
> > > > was already clear
> > > > > (II) intel(0): detected 128 kB GTT.
> > > > > (II) intel(0): detected 16252 kB stolen
> > memory.
> > > > > (==) intel(0): video overlay key set to
> > 0x101fe
> > > > > (==) intel(0): Intel XvMC decoder disabled
> > > > > (==) intel(0): Will not try to enable page
> > flipping
> > > > > (==) intel(0): Triple buffering disabled
> > > > > (==) intel(0): Using gamma correction (1.0,
> > 1.0, 1.0)
> > > > > (**) intel(0): Display dimensions: (340,
> > 270) mm
> > > > > (**) intel(0): DPI set to (152, 191)
> > > > > (II) Loading sub module "fb"
> > > > > (II) LoadModule: "fb"
> > > > >
> > > > > (II) Loading
> > /usr/local/lib/xorg/modules//libfb.so
> > > > > (II) Module fb: vendor="X.Org
> > Foundation"
> > > > > compiled for 1.5.3, module version =
> > 1.0.0
> > > > > ABI class: X.Org ANSI C Emulation,
> > version 0.4
> > > > > (II) Loading sub module "exa"
> > > > > (II) LoadModule: "exa"
> > > > >
> > > > > (II) Loading
> > /usr/local/lib/xorg/modules//libexa.so
> > > > > (II) Module exa: vendor="X.Org
> > Foundation"
> > > > > compiled for 1.5.3, module version =
> > 2.4.0
> > > > > ABI class: X.Org Video Driver, version
> > 4.1
> > > > > (II) Loading sub module "ramdac"
> > > > > (II) LoadModule: "ramdac"
> > > > > (II) Module "ramdac" already
> > built-in
> > > > > (II) intel(0): Comparing regs from server
> > start up to
> > > > After PreInit
> > > > > (II) Loading sub module "dri"
> > > > > (II) LoadModule: "dri"
> > > > >
> > > > > (II) Reloading
> > > > /usr/local/lib/xorg/modules/extensions//libdri.so
> > > > > (==) Depth 24 pixmap format is 32 bpp
> > > > > (II) do I need RAC? No, I don't.
> > > > > (II) resource ranges after preInit:
> > > > > [0] -1 0 0x00100000 - 0x3fffffff
> > (0x3ff00000)
> > > > MX[B]E(B)
> > > > > [1] -1 0 0x000f0000 - 0x000fffff
> > (0x10000) MX[B]
> > > > > [2] -1 0 0x000c0000 - 0x000effff
> > (0x30000) MX[B]
> > > > > [3] -1 0 0x00000000 - 0x0009ffff
> > (0xa0000) MX[B]
> > > > > [4] 0 0 0x000a0000 - 0x000affff
> > (0x10000) MS[B](OprD)
> > > > > [5] 0 0 0x000b0000 - 0x000b7fff
> > (0x8000) MS[B](OprD)
> > > > > [6] 0 0 0x000b8000 - 0x000bffff
> > (0x8000) MS[B](OprD)
> > > > > [7] -1 0 0x0000ffff - 0x0000ffff
> > (0x1) IX[B]
> > > > > [8] -1 0 0x00000000 - 0x000000ff
> > (0x100) IX[B]
> > > > > [9] 0 0 0x000003b0 - 0x000003bb
> > (0xc) IS[B](OprU)
> > > > > [10] 0 0 0x000003c0 - 0x000003df
> > (0x20) IS[B](OprU)
> > > > > (II) intel(0): Kernel reported 241152 total,
> > 0 used
> > > > > (II) intel(0): I830CheckAvailableMemory:
> > 964608 kB
> > > > available
> > > > > drmOpenDevice: node name is /dev/dri/card0
> > > > > drmOpenDevice: open result is 10, (OK)
> > > > > drmOpenDevice: node name is /dev/dri/card0
> > > > > drmOpenDevice: open result is 10, (OK)
> > > > > drmOpenByBusid: Searching for BusID
> > pci:0000:00:02.0
> > > > > drmOpenDevice: node name is /dev/dri/card0
> > > > > drmOpenDevice: open result is 10, (OK)
> > > > > drmOpenByBusid: drmOpenMinor returns 10
> > > > > drmOpenByBusid: drmGetBusid reports
> > pci:0000:00:02.0
> > > > > (II) [drm] DRM interface version 1.2
> > > > > (II) [drm] DRM open master succeeded.
> > > > > (II) intel(0): [drm] Using the DRM lock
> > SAREA also for
> > > > drawables.
> > > > > (II) intel(0): [drm] framebuffer mapped by
> > ddx driver
> > > > > (II) intel(0): [drm] added 1 reserved
> > context for
> > > > kernel
> > > > > (II) intel(0): X context handle = 0x1
> > > > > (II) intel(0): [drm] installed DRM signal
> > handler
> > > > > (**) intel(0): Framebuffer compression
> > disabled
> > > > > (**) intel(0): Tiling enabled
> > > > > (==) intel(0): VideoRam: 131072 KB
> > > > > (II) intel(0): Attempting memory allocation
> > with tiled
> > > > buffers.
> > > > > (WW) intel(0): Failed to allocate texture
> > space.
> > > > > (II) intel(0): Tiled allocation failed.
> > > > > (II) intel(0): Attempting memory allocation
> > with
> > > > untiled buffers.
> > > > > (WW) intel(0): Failed to allocate texture
> > space.
> > > > > (II) intel(0): Untiled allocation failed.
> > > > > (II) intel(0): Couldn't allocate 3D
> > memory,
> > > > disabling DRI.
> > > > > (II) intel(0): Attempting memory allocation
> > with
> > > > untiled buffers.
> > > > > (II) intel(0): Untiled allocation
> > successful.
> > > >
> > > > There is some problem on 855 class hardware with
> > agp/drm
> > > > and tiled
> > > > buffers. I need to get a debugging build of agp
> > to see if
> > > > I can figure
> > > > out what is going on. Try disabling tiled
> > buffers and see
> > > > if that
> > > > helps. Option "Tiling" "off"
> > in the
> > > > Device section.
> > > >
> > > > robert.
> > > >
> > > > > (II) intel(0): Page Flipping disabled
> > > > > (II) intel(0): vgaHWGetIOBase:
> > hwp->IOBase is
> > > > 0x03d0, hwp->PIOOffset is 0x0000
> > > > > (==) intel(0): Write-combining range
> > (0xa0000,0x10000)
> > > > was already clear
> > > > > (**) intel(0): Option
> > "MigrationHeuristic"
> > > > "greedy"
> > > > > (**) intel(0): Option
> > "EXANoComposite"
> > > > "false"
> > > > > (II) EXA(0): Offscreen pixmap area of
> > 50135040 bytes
> > > > > (II) EXA(0): Driver registered support for
> > the
> > > > following operations:
> > > > > (II) Solid
> > > > > (II) Copy
> > > > > (II) Composite (RENDER acceleration)
> > > > > (==) intel(0): Backing store disabled
> > > > > (==) intel(0): Silken mouse enabled
> > > > > (II) intel(0): Initializing HW Cursor
> > > > > (II) intel(0): xf86BindGARTMemory: bind key
> > 11 at
> > > > 0x00fdf000 (pgoffset 4063)
> > > > > (II) intel(0): xf86BindGARTMemory: bind key
> > 12 at
> > > > 0x00fe0000 (pgoffset 4064)
> > > > > (II) intel(0): xf86BindGARTMemory: bind key
> > 13 at
> > > > 0x01fd0000 (pgoffset 8144)
> > > > > (II) intel(0): Fixed memory allocation
> > layout:
> > > > > (II) intel(0): 0x00000000-0x0001ffff: ring
> > buffer (128
> > > > kB)
> > > > > (II) intel(0): 0x00020000-0x00024fff: HW
> > cursors (20
> > > > kB)
> > > > > (II) intel(0): 0x00025000-0x0002cfff:
> > logical 3D
> > > > context (32 kB)
> > > > > (II) intel(0): 0x0002d000-0x0012cfff: fake
> > bufmgr
> > > > (1024 kB)
> > > > > (II) intel(0): 0x00fdf000: end of
> > stolen
> > > > memory
> > > > > (II) intel(0): 0x00fdf000-0x00fdffff:
> > overlay
> > > > registers (4 kB, 0x000000000823b000 physical
> > > > > )
> > > > > (II) intel(0): 0x00fe0000-0x01fcffff: front
> > buffer
> > > > (16320 kB)
> > > > > (II) intel(0): 0x01fd0000-0x04f9ffff: exa
> > offscreen
> > > > (48960 kB)
> > > > > (II) intel(0): 0x08000000: end of
> > aperture
> > > > > (II) intel(0): Output configuration:
> > > > > (II) intel(0): Pipe A is on
> > > > > (II) intel(0): Display plane A is now
> > enabled and
> > > > connected to pipe A.
> > > > > (II) intel(0): Output VGA is connected to
> > pipe A
> > > > > (II) intel(0): RandR 1.2 enabled, ignore the
> > following
> > > > RandR disabled message.
> > > > > (**) Option "dpms"
> > "true"
> > > > > (**) intel(0): DPMS enabled
> > > > > (II) intel(0): Set up overlay video
> > > > > (II) intel(0): direct rendering: Failed
> > > > > (--) RandR disabled
> > > > > (II) Initializing built-in extension MIT-SHM
> > > > > (II) Initializing built-in extension
> > XInputExtension
> > > > > (II) Initializing built-in extension XTEST
> > > > > (II) Initializing built-in extension
> > XKEYBOARD
> > > > > (II) Initializing built-in extension
> > XINERAMA
> > > > > (II) Initializing built-in extension XFIXES
> > > > > (II) Initializing built-in extension RENDER
> > > > > (II) Initializing built-in extension RANDR
> > > > > (II) Initializing built-in extension
> > COMPOSITE
> > > > > (II) Initializing built-in extension DAMAGE
> > > > > (II) Initializing built-in extension XEVIE
> > > > > drmOpenDevice: node name is /dev/dri/card0
> > > > > drmOpenDevice: open result is 11, (OK)
> > > > > drmOpenByBusid: Searching for BusID
> > pci:0000:00:02.0
> > > > > drmOpenDevice: node name is /dev/dri/card0
> > > > > drmOpenDevice: open result is 11, (OK)
> > > > > drmOpenByBusid: drmOpenMinor returns 11
> > > > > drmOpenByBusid: drmGetBusid reports
> > pci:0000:00:02.0
> > > > > (EE) AIGLX error: Calling driver entry point
> > > > failed(EE) AIGLX: reverting to software rendering
> > > > > (II) AIGLX: Loaded and initialized
> > > > /usr/local/lib/dri/swrast_dri.so
> > > > > (II) GLX: Initialized DRISWRAST GL provider
> > for screen
> > > > 0
> > > > > (II) intel(0): Setting screen physical size
> > to 359 x
> > > > 287
> > > > > (II) config/hal: Adding input device AT
> > Keyboard
> > > > > (II) LoadModule: "kbd"
> > > > >
> > > > > (II) Loading
> > > > /usr/local/lib/xorg/modules/input//kbd_drv.so
> > > > > (II) Module kbd: vendor="X.Org
> > Foundation"
> > > > > compiled for 1.5.3, module version =
> > 1.3.2
> > > > > Module class: X.Org XInput Driver
> > > > > ABI class: X.Org XInput driver, version
> > 2.1
> > > > > (**) AT Keyboard: always reports core events
> > > > > (**) Option "Protocol"
> > "standard"
> > > > > (**) AT Keyboard: Protocol: standard
> > > > > (**) Option "AutoRepeat" "500
> > 30"
> > > > > (**) Option "XkbRules"
> > "base"
> > > > > (**) AT Keyboard: XkbRules: "base"
> > > > > (**) Option "XkbModel"
> > "pc105"
> > > > > (**) AT Keyboard: XkbModel:
> > "pc105"
> > > > > (**) Option "XkbLayout"
> > "us,ru"
> > > > > (**) AT Keyboard: XkbLayout:
> > "us,ru"
> > > > > (**) Option "XkbVariant"
> > > > ",winkeys"
> > > > > (**) AT Keyboard: XkbVariant:
> > ",winkeys"
> > > > > (**) Option "XkbOptions"
> > > > "grp:ctrl_shift_toggle,grp_led:scroll"
> > > > > (**) AT Keyboard: XkbOptions:
> > > > "grp:ctrl_shift_toggle,grp_led:scroll"
> > > > > (**) Option "CustomKeycodes"
> > "off"
> > > > > (**) AT Keyboard: CustomKeycodes disabled
> > > > > (II) XINPUT: Adding extended input device
> > "AT
> > > > Keyboard" (type: KEYBOARD)
> > > > > (II) config/hal: Adding input device PS/2
> > Mouse
> > > > > (II) LoadModule: "mouse"
> > > > >
> > > > > (II) Loading
> > > > /usr/local/lib/xorg/modules/input//mouse_drv.so
> > > > > (II) Module mouse: vendor="X.Org
> > Foundation"
> > > > > compiled for 1.5.3, module version =
> > 1.4.0
> > > > > Module class: X.Org XInput Driver
> > > > > ABI class: X.Org XInput driver, version
> > 2.1
> > > > > (**) PS/2 Mouse: Device:
> > "/dev/psm0"
> > > > > (==) PS/2 Mouse: Protocol: "Auto"
> > > > > (**) PS/2 Mouse: always reports core events
> > > > > (**) Option "Device"
> > "/dev/psm0"
> > > > > (==) PS/2 Mouse: Emulate3Buttons,
> > Emulate3Timeout: 50
> > > > > (**) PS/2 Mouse: ZAxisMapping: buttons 4 and
> > 5
> > > > > (**) Option "EmulateWheel"
> > "true"
> > > > > (**) Option "EmulateWheelButton"
> > > > "2"
> > > > > (**) Option "EmulateWheelTimeout"
> > > > "200"
> > > > > (**) Option "XAxisMapping" "4
> > 5"
> > > > > (**) PS/2 Mouse: XAxisMapping: buttons 4 and
> > 5
> > > > > (**) Option "YAxisMapping" "6
> > 7"
> > > > > (**) PS/2 Mouse: YAxisMapping: buttons 6 and
> > 7
> > > > > (**) PS/2 Mouse: EmulateWheel,
> > EmulateWheelButton: 2,
> > > > EmulateWheelInertia: 10, EmulateWheelTimeout: 200
> > > > > (**) PS/2 Mouse: Buttons: 11
> > > > > (**) PS/2 Mouse: Sensitivity: 1
> > > > > (II) XINPUT: Adding extended input device
> > "PS/2
> > > > Mouse" (type: MOUSE)
> > > > > (II) PS/2 Mouse: SetupAuto: hw.iftype is 3,
> > hw.model
> > > > is 10
> > > > > (II) PS/2 Mouse: SetupAuto: protocol is
> > ExplorerPS/2
> > > > > (II) PS/2 Mouse: ps2EnableDataReporting:
> > succeeded
> > > > > (WW) fcntl(12, O_ASYNC): Inappropriate ioctl
> > for
> > > > device
> > > > > (II) intel(0): I2C bus "CRTDDC_A"
> > > > initialized.
> > > > > (II) intel(0): I2C bus "CRTDDC_A"
> > removed.
> > > > > (II) intel(0): I2C bus "CRTDDC_A"
> > > > initialized.
> > > > > (II) intel(0): I2C device
> > "CRTDDC_A:ddc2"
> > > > registered at address 0xA0.
> > > > > (II) intel(0): I2C device
> > "CRTDDC_A:ddc2"
> > > > removed.
> > > > > (II) intel(0): I2C bus "CRTDDC_A"
> > removed.
> > > > > (II) intel(0): EDID vendor "SNY",
> > prod id
> > > > 10096
> > > > > (II) intel(0): Using hsync ranges from
> > config file
> > > > > (II) intel(0): Using vrefresh ranges from
> > config file
> > > > > (II) intel(0): Printing DDC gathered
> > Modelines:
> > > > > (II) intel(0): Modeline
> > "1280x1024"x0.0
> > > > 108.00 1280 1328 1440 1688 1024 1025 1028 1066
> > +hsync
> > > > +vsync (64.0 kHz)
> > > > > (II) intel(0): Modeline
> > "800x600"x0.0
> > > > 40.00 800 840 968 1056 600 601 605 628 +hsync
> > +vsync (37.9
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "640x480"x0.0
> > > > 31.50 640 656 720 840 480 481 484 500 -hsync
> > -vsync (37.5
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "640x480"x0.0
> > > > 31.50 640 664 704 832 480 489 491 520 -hsync
> > -vsync (37.9
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "640x480"x0.0
> > > > 25.20 640 656 752 800 480 490 492 525 -hsync
> > -vsync (31.5
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "720x400"x0.0
> > > > 28.32 720 738 846 900 400 412 414 449 -hsync
> > +vsync (31.5
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "1280x1024"x0.0
> > > > 135.00 1280 1296 1440 1688 1024 1025 1028 1066
> > +hsync
> > > > +vsync (80.0 kHz)
> > > > > (II) intel(0): Modeline
> > "1024x768"x0.0
> > > > 78.80 1024 1040 1136 1312 768 769 772 800
> > +hsync +vsync
> > > > (60.1 kHz)
> > > > > (II) intel(0): Modeline
> > "1024x768"x0.0
> > > > 75.00 1024 1048 1184 1328 768 771 777 806
> > -hsync -vsync
> > > > (56.5 kHz)
> > > > > (II) intel(0): Modeline
> > "1024x768"x0.0
> > > > 65.00 1024 1048 1184 1344 768 771 777 806
> > -hsync -vsync
> > > > (48.4 kHz)
> > > > > (II) intel(0): Modeline
> > "800x600"x0.0
> > > > 49.50 800 816 896 1056 600 601 604 625 +hsync
> > +vsync (46.9
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "800x600"x0.0
> > > > 50.00 800 856 976 1040 600 637 643 666 +hsync
> > +vsync (48.1
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "1280x1024"x60.0
> > > > 108.88 1280 1360 1496 1712 1024 1025 1028 1060
> > -hsync
> > > > +vsync (63.6 kHz)
> > > > > (II) intel(0): Modeline
> > "1280x960"x60.0
> > > > 102.10 1280 1360 1496 1712 960 961 964 994
> > -hsync +vsync
> > > > (59.6 kHz)
> > > > > (II) intel(0): EDID vendor "SNY",
> > prod id
> > > > 10096
> > > > > (II) intel(0): I2C bus "CRTDDC_A"
> > > > initialized.
> > > > > (II) intel(0): I2C bus "CRTDDC_A"
> > removed.
> > > > > (II) intel(0): I2C bus "CRTDDC_A"
> > > > initialized.
> > > > > (II) intel(0): I2C device
> > "CRTDDC_A:ddc2"
> > > > registered at address 0xA0.
> > > > > (II) intel(0): I2C device
> > "CRTDDC_A:ddc2"
> > > > removed.
> > > > > (II) intel(0): I2C bus "CRTDDC_A"
> > removed.
> > > > > (II) intel(0): EDID vendor "SNY",
> > prod id
> > > > 10096
> > > > > (II) intel(0): Using hsync ranges from
> > config file
> > > > > (II) intel(0): Using vrefresh ranges from
> > config file
> > > > > (II) intel(0): Printing DDC gathered
> > Modelines:
> > > > > (II) intel(0): Modeline
> > "1280x1024"x0.0
> > > > 108.00 1280 1328 1440 1688 1024 1025 1028 1066
> > +hsync
> > > > +vsync (64.0 kHz)
> > > > > (II) intel(0): Modeline
> > "800x600"x0.0
> > > > 40.00 800 840 968 1056 600 601 605 628 +hsync
> > +vsync (37.9
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "640x480"x0.0
> > > > 31.50 640 656 720 840 480 481 484 500 -hsync
> > -vsync (37.5
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "640x480"x0.0
> > > > 31.50 640 664 704 832 480 489 491 520 -hsync
> > -vsync (37.9
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "640x480"x0.0
> > > > 25.20 640 656 752 800 480 490 492 525 -hsync
> > -vsync (31.5
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "720x400"x0.0
> > > > 28.32 720 738 846 900 400 412 414 449 -hsync
> > +vsync (31.5
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "1280x1024"x0.0
> > > > 135.00 1280 1296 1440 1688 1024 1025 1028 1066
> > +hsync
> > > > +vsync (80.0 kHz)
> > > > > (II) intel(0): Modeline
> > "1024x768"x0.0
> > > > 78.80 1024 1040 1136 1312 768 769 772 800
> > +hsync +vsync
> > > > (60.1 kHz)
> > > > > (II) intel(0): Modeline
> > "1024x768"x0.0
> > > > 75.00 1024 1048 1184 1328 768 771 777 806
> > -hsync -vsync
> > > > (56.5 kHz)
> > > > > (II) intel(0): Modeline
> > "1024x768"x0.0
> > > > 65.00 1024 1048 1184 1344 768 771 777 806
> > -hsync -vsync
> > > > (48.4 kHz)
> > > > > (II) intel(0): Modeline
> > "800x600"x0.0
> > > > 49.50 800 816 896 1056 600 601 604 625 +hsync
> > +vsync (46.9
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "800x600"x0.0
> > > > 50.00 800 856 976 1040 600 637 643 666 +hsync
> > +vsync (48.1
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "1280x1024"x60.0
> > > > 108.88 1280 1360 1496 1712 1024 1025 1028 1060
> > -hsync
> > > > +vsync (63.6 kHz)
> > > > > (II) intel(0): Modeline
> > "1280x960"x60.0
> > > > 102.10 1280 1360 1496 1712 960 961 964 994
> > -hsync +vsync
> > > > (59.6 kHz)
> > > > > (II) intel(0): EDID vendor "SNY",
> > prod id
> > > > 10096
> > > > > (II) intel(0): I2C bus "CRTDDC_A"
> > > > initialized.
> > > > > (II) intel(0): I2C bus "CRTDDC_A"
> > removed.
> > > > > (II) intel(0): I2C bus "CRTDDC_A"
> > > > initialized.
> > > > > (II) intel(0): I2C device
> > "CRTDDC_A:ddc2"
> > > > registered at address 0xA0.
> > > > > (II) intel(0): I2C device
> > "CRTDDC_A:ddc2"
> > > > removed.
> > > > > (II) intel(0): I2C bus "CRTDDC_A"
> > removed.
> > > > > (II) intel(0): EDID vendor "SNY",
> > prod id
> > > > 10096
> > > > > (II) intel(0): Using hsync ranges from
> > config file
> > > > > (II) intel(0): Using vrefresh ranges from
> > config file
> > > > > (II) intel(0): Printing DDC gathered
> > Modelines:
> > > > > (II) intel(0): Modeline
> > "1280x1024"x0.0
> > > > 108.00 1280 1328 1440 1688 1024 1025 1028 1066
> > +hsync
> > > > +vsync (64.0 kHz)
> > > > > (II) intel(0): Modeline
> > "800x600"x0.0
> > > > 40.00 800 840 968 1056 600 601 605 628 +hsync
> > +vsync (37.9
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "640x480"x0.0
> > > > 31.50 640 656 720 840 480 481 484 500 -hsync
> > -vsync (37.5
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "640x480"x0.0
> > > > 31.50 640 664 704 832 480 489 491 520 -hsync
> > -vsync (37.9
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "640x480"x0.0
> > > > 25.20 640 656 752 800 480 490 492 525 -hsync
> > -vsync (31.5
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "720x400"x0.0
> > > > 28.32 720 738 846 900 400 412 414 449 -hsync
> > +vsync (31.5
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "1280x1024"x0.0
> > > > 135.00 1280 1296 1440 1688 1024 1025 1028 1066
> > +hsync
> > > > +vsync (80.0 kHz)
> > > > > (II) intel(0): Modeline
> > "1024x768"x0.0
> > > > 78.80 1024 1040 1136 1312 768 769 772 800
> > +hsync +vsync
> > > > (60.1 kHz)
> > > > > (II) intel(0): Modeline
> > "1024x768"x0.0
> > > > 75.00 1024 1048 1184 1328 768 771 777 806
> > -hsync -vsync
> > > > (56.5 kHz)
> > > > > (II) intel(0): Modeline
> > "1024x768"x0.0
> > > > 65.00 1024 1048 1184 1344 768 771 777 806
> > -hsync -vsync
> > > > (48.4 kHz)
> > > > > (II) intel(0): Modeline
> > "800x600"x0.0
> > > > 49.50 800 816 896 1056 600 601 604 625 +hsync
> > +vsync (46.9
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "800x600"x0.0
> > > > 50.00 800 856 976 1040 600 637 643 666 +hsync
> > +vsync (48.1
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "1280x1024"x60.0
> > > > 108.88 1280 1360 1496 1712 1024 1025 1028 1060
> > -hsync
> > > > +vsync (63.6 kHz)
> > > > > (II) intel(0): Modeline
> > "1280x960"x60.0
> > > > 102.10 1280 1360 1496 1712 960 961 964 994
> > -hsync +vsync
> > > > (59.6 kHz)
> > > > > (II) intel(0): EDID vendor "SNY",
> > prod id
> > > > 10096
> > > > > (II) intel(0): I2C bus "CRTDDC_A"
> > > > initialized.
> > > > > (II) intel(0): I2C bus "CRTDDC_A"
> > removed.
> > > > > (II) intel(0): I2C bus "CRTDDC_A"
> > > > initialized.
> > > > > (II) intel(0): I2C device
> > "CRTDDC_A:ddc2"
> > > > registered at address 0xA0.
> > > > > (II) intel(0): I2C device
> > "CRTDDC_A:ddc2"
> > > > removed.
> > > > > (II) intel(0): I2C bus "CRTDDC_A"
> > removed.
> > > > > (II) intel(0): EDID vendor "SNY",
> > prod id
> > > > 10096
> > > > > (II) intel(0): Using hsync ranges from
> > config file
> > > > > (II) intel(0): Using vrefresh ranges from
> > config file
> > > > > (II) intel(0): Printing DDC gathered
> > Modelines:
> > > > > (II) intel(0): Modeline
> > "1280x1024"x0.0
> > > > 108.00 1280 1328 1440 1688 1024 1025 1028 1066
> > +hsync
> > > > +vsync (64.0 kHz)
> > > > > (II) intel(0): Modeline
> > "800x600"x0.0
> > > > 40.00 800 840 968 1056 600 601 605 628 +hsync
> > +vsync (37.9
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "640x480"x0.0
> > > > 31.50 640 656 720 840 480 481 484 500 -hsync
> > -vsync (37.5
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "640x480"x0.0
> > > > 31.50 640 664 704 832 480 489 491 520 -hsync
> > -vsync (37.9
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "640x480"x0.0
> > > > 25.20 640 656 752 800 480 490 492 525 -hsync
> > -vsync (31.5
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "720x400"x0.0
> > > > 28.32 720 738 846 900 400 412 414 449 -hsync
> > +vsync (31.5
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "1280x1024"x0.0
> > > > 135.00 1280 1296 1440 1688 1024 1025 1028 1066
> > +hsync
> > > > +vsync (80.0 kHz)
> > > > > (II) intel(0): Modeline
> > "1024x768"x0.0
> > > > 78.80 1024 1040 1136 1312 768 769 772 800
> > +hsync +vsync
> > > > (60.1 kHz)
> > > > > (II) intel(0): Modeline
> > "1024x768"x0.0
> > > > 75.00 1024 1048 1184 1328 768 771 777 806
> > -hsync -vsync
> > > > (56.5 kHz)
> > > > > (II) intel(0): Modeline
> > "1024x768"x0.0
> > > > 65.00 1024 1048 1184 1344 768 771 777 806
> > -hsync -vsync
> > > > (48.4 kHz)
> > > > > (II) intel(0): Modeline
> > "800x600"x0.0
> > > > 49.50 800 816 896 1056 600 601 604 625 +hsync
> > +vsync (46.9
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "800x600"x0.0
> > > > 50.00 800 856 976 1040 600 637 643 666 +hsync
> > +vsync (48.1
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "1280x1024"x60.0
> > > > 108.88 1280 1360 1496 1712 1024 1025 1028 1060
> > -hsync
> > > > +vsync (63.6 kHz)
> > > > > (II) intel(0): Modeline
> > "1280x960"x60.0
> > > > 102.10 1280 1360 1496 1712 960 961 964 994
> > -hsync +vsync
> > > > (59.6 kHz)
> > > > > (II) intel(0): EDID vendor "SNY",
> > prod id
> > > > 10096
> > > > > (II) intel(0): I2C bus "CRTDDC_A"
> > > > initialized.
> > > > > (II) intel(0): I2C bus "CRTDDC_A"
> > removed.
> > > > > (II) intel(0): I2C bus "CRTDDC_A"
> > > > initialized.
> > > > > (II) intel(0): I2C device
> > "CRTDDC_A:ddc2"
> > > > registered at address 0xA0.
> > > > > (II) intel(0): I2C device
> > "CRTDDC_A:ddc2"
> > > > removed.
> > > > > (II) intel(0): I2C bus "CRTDDC_A"
> > removed.
> > > > > (II) intel(0): EDID vendor "SNY",
> > prod id
> > > > 10096
> > > > > (II) intel(0): Using hsync ranges from
> > config file
> > > > > (II) intel(0): Using vrefresh ranges from
> > config file
> > > > > (II) intel(0): Printing DDC gathered
> > Modelines:
> > > > > (II) intel(0): Modeline
> > "1280x1024"x0.0
> > > > 108.00 1280 1328 1440 1688 1024 1025 1028 1066
> > +hsync
> > > > +vsync (64.0 kHz)
> > > > > (II) intel(0): Modeline
> > "800x600"x0.0
> > > > 40.00 800 840 968 1056 600 601 605 628 +hsync
> > +vsync (37.9
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "640x480"x0.0
> > > > 31.50 640 656 720 840 480 481 484 500 -hsync
> > -vsync (37.5
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "640x480"x0.0
> > > > 31.50 640 664 704 832 480 489 491 520 -hsync
> > -vsync (37.9
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "640x480"x0.0
> > > > 25.20 640 656 752 800 480 490 492 525 -hsync
> > -vsync (31.5
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "720x400"x0.0
> > > > 28.32 720 738 846 900 400 412 414 449 -hsync
> > +vsync (31.5
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "1280x1024"x0.0
> > > > 135.00 1280 1296 1440 1688 1024 1025 1028 1066
> > +hsync
> > > > +vsync (80.0 kHz)
> > > > > (II) intel(0): Modeline
> > "1024x768"x0.0
> > > > 78.80 1024 1040 1136 1312 768 769 772 800
> > +hsync +vsync
> > > > (60.1 kHz)
> > > > > (II) intel(0): Modeline
> > "1024x768"x0.0
> > > > 75.00 1024 1048 1184 1328 768 771 777 806
> > -hsync -vsync
> > > > (56.5 kHz)
> > > > > (II) intel(0): Modeline
> > "1024x768"x0.0
> > > > 65.00 1024 1048 1184 1344 768 771 777 806
> > -hsync -vsync
> > > > (48.4 kHz)
> > > > > (II) intel(0): Modeline
> > "800x600"x0.0
> > > > 49.50 800 816 896 1056 600 601 604 625 +hsync
> > +vsync (46.9
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "800x600"x0.0
> > > > 50.00 800 856 976 1040 600 637 643 666 +hsync
> > +vsync (48.1
> > > > kHz)
> > > > > (II) intel(0): Modeline
> > "1280x1024"x60.0
> > > > 108.88 1280 1360 1496 1712 1024 1025 1028 1060
> > -hsync
> > > > +vsync (63.6 kHz)
> > > > > (II) intel(0): Modeline
> > "1280x960"x60.0
> > > > 102.10 1280 1360 1496 1712 960 961 964 994
> > -hsync +vsync
> > > > (59.6 kHz)
> > > > > (II) intel(0): EDID vendor "SNY",
> > prod id
> > > > 10096
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > _______________________________________________
> > > > > freebsd-x11 at freebsd.org mailing list
> > > > >
> > http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> > > > > To unsubscribe, send any mail to
> > > > "freebsd-x11-unsubscribe at freebsd.org"
> > >
> > >
> > >
> > > _______________________________________________
> > > freebsd-x11 at freebsd.org mailing list
> > > http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> > > To unsubscribe, send any mail to
> > "freebsd-x11-unsubscribe at freebsd.org"
>
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090129/b7ff2503/attachment-0001.pgp
More information about the freebsd-x11
mailing list