USB keyboard new xorg failure
Robert Noland
rnoland at FreeBSD.org
Sun Jan 25 14:16:27 PST 2009
On Sun, 2009-01-25 at 16:39 -0500, J.J wrote:
>
> On Sun, Jan 25, 2009 at 4:18 PM, Robert Noland <rnoland at freebsd.org>
> wrote:
> On Sun, 2009-01-25 at 15:55 -0500, J.J wrote:
> > (EE) intel(0): Failed to init memory manager
>
>
> Something has gone very wrong at this point... I would
> recommend a
> reboot... then send me your xorg.conf and xorg.log if it still
> doesn't
> work.
>
> robert.
>
>
> Full powerdown, waited a few minutes, powered on, same, excatly the
> same. Here's the full Xorg.0.log xorg.conf and pciconf -vl and
> console message
>
> >startx
> xauth: creating new authority file /home/jimmie/.serverauth.1630
>
>
> X.Org X Server 1.5.3
> Release Date: 5 November 2008
> X Protocol Version 11, Revision 0
> Build Operating System: FreeBSD 7.1-STABLE i386
> Current Operating System: FreeBSD fortytwo.zapto.org 7.1-STABLE
> FreeBSD 7.1-STAB
> LE #0: Tue Jan 6 03:43:02 EST 2009
> jimmie at fortytwo.zapto.org:/usr/obj/usr/s
> rc/sys/FORTYTWO i386
> Build Date: 25 January 2009 02:55:41PM
>
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 25 16:32:42 2009
> (==) Using config file: "/etc/X11/xorg.conf"
> (EE) intel(0): Failed to init memory manager
> (EE) Natural? Ergonomic Keyboard 4000: cannot open "/dev/ukbd0"
> (EE) PreInit failed for input device "Natural? Ergonomic Keyboard
> 4000"
> (EE) config/hal: NewInputDeviceRequest failed
> /home/jimmie/.xinitrc: X server already running on display :0
> xscreensaver: not found
> Agent pid 1665
> xinit: connection to X server lost.
>
>
>
>
> hostb0 at pci0:0:0:0: class=0x060000 card=0x25808086 chip=0x25808086
> rev=0x04 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82915G/GV/GL/P/PL/GL/910GE/GL Grantsdale Host
> Bridge/DRAM Controller'
> class = bridge
> subclass = HOST-PCI
> vgapci0 at pci0:0:2:0: class=0x030000 card=0x25821043 chip=0x25828086
> rev=0x04 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82915G/GV/GL, 82910GL Integrated Graphics Device'
> class = display
> subclass = VGA
> vgapci1 at pci0:0:2:1: class=0x038000 card=0x25821043 chip=0x27828086
> rev=0x04 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82915G Graphics device: 82915G/GV/910GL Express
> Chipset Family'
> class = display
> pcm0 at pci0:0:27:0: class=0x040300 card=0x814e1043 chip=0x26688086
> rev=0x03 hdr=0x00
> vendor = 'Intel Corporation'
> device = '11583659 Realtek High Definition Audio Controllers'
> class = multimedia
> pcib1 at pci0:0:28:0: class=0x060400 card=0x00000000 chip=0x26608086
> rev=0x03 hdr=0x01
> vendor = 'Intel Corporation'
> device = '82801FB/FR/FW/FRW PCI Express Port 1'
> class = bridge
> subclass = PCI-PCI
> pcib2 at pci0:0:28:1: class=0x060400 card=0x00000000 chip=0x26628086
> rev=0x03 hdr=0x01
> vendor = 'Intel Corporation'
> device = '82801FB/FR/FW/FRW PCI Express Port 2'
> class = bridge
> subclass = PCI-PCI
> pcib3 at pci0:0:28:2: class=0x060400 card=0x00000000 chip=0x26648086
> rev=0x03 hdr=0x01
> vendor = 'Intel Corporation'
> device = '82801FB (ICH6) PCIe Root Port 3'
> class = bridge
> subclass = PCI-PCI
> pcib4 at pci0:0:28:3: class=0x060400 card=0x00000000 chip=0x26668086
> rev=0x03 hdr=0x01
> vendor = 'Intel Corporation'
> device = '82801FB/FR/FW/FRW PCI Express Port 4'
> class = bridge
> subclass = PCI-PCI
> uhci0 at pci0:0:29:0: class=0x0c0300 card=0x80a61043 chip=0x26588086
> rev=0x03 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801FB/FR/FW/FRW USB UHCI Controller'
> class = serial bus
> subclass = USB
> uhci1 at pci0:0:29:1: class=0x0c0300 card=0x80a61043 chip=0x26598086
> rev=0x03 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801FB/FR/FW/FRW USB UHCI Controller'
> class = serial bus
> subclass = USB
> uhci2 at pci0:0:29:2: class=0x0c0300 card=0x80a61043 chip=0x265a8086
> rev=0x03 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801FB/FR/FW/FRW USB UHCI Controller'
> class = serial bus
> subclass = USB
> uhci3 at pci0:0:29:3: class=0x0c0300 card=0x80a61043 chip=0x265b8086
> rev=0x03 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801FB/FR/FW/FRW USB UHCI Controller'
> class = serial bus
> subclass = USB
> ehci0 at pci0:0:29:7: class=0x0c0320 card=0x80a61043 chip=0x265c8086
> rev=0x03 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801FB/FR/FW/FRW USB 2.0 EHCI Controller'
> class = serial bus
> subclass = USB
> pcib5 at pci0:0:30:0: class=0x060401 card=0x00000000 chip=0x244e8086
> rev=0xd3 hdr=0x01
> vendor = 'Intel Corporation'
> device = '82801 Family (ICH2/3/4/4/5/5/6/7/8/9,63xxESB) Hub
> Interface to PCI Bridge'
> class = bridge
> subclass = PCI-PCI
> isab0 at pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x26408086
> rev=0x03 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801FB/FR (ICH6/ICH6R) LPC Interface Bridge'
> class = bridge
> subclass = PCI-ISA
> atapci0 at pci0:0:31:1: class=0x01018a card=0x80a61043 chip=0x266f8086
> rev=0x03 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801FB/FBM Ultra ATA Storage Controllers - 266F'
> class = mass storage
> subclass = ATA
> atapci1 at pci0:0:31:2: class=0x01018f card=0x26011043 chip=0x26518086
> rev=0x03 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801FB (ICH6) SATA Controller'
> class = mass storage
> subclass = ATA
> ichsmb0 at pci0:0:31:3: class=0x0c0500 card=0x80a61043 chip=0x266a8086
> rev=0x03 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801FB (ICH6) SMBus Controller'
> class = serial bus
> subclass = SMBus
> fxp0 at pci0:1:8:0: class=0x020000 card=0x80f81043 chip=0x10648086
> rev=0x03 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82562EZ PRO/100 Ethernet Controller'
> class = network
> subclass = ethernet
> rl0 at pci0:1:10:0: class=0x020000 card=0x12111113 chip=0x12111113
> rev=0x10 hdr=0x00
> vendor = 'Accton Technology Corporation'
> device = 'EN-1207D Fast Ethernet Adapter'
> class = network
> subclass = ethernet
> xl0 at pci0:1:11:0: class=0x020000 card=0x100010b7 chip=0x920010b7
> rev=0x78 hdr=0x00
> vendor = '3COM Corp, Networking Division'
> device = '3C905 CX-TX-M Fast EtherLink for PC Management NIC'
> class = network
> subclass = ethernet
>
>
> #Section "Extensions"
> # Option "Composite" "Enable"
> # Option "RENDER" "Enable"
> #EndSection
>
>
> Section "ServerLayout"
> Identifier "Simple Layout"
> Screen "Screen 1" 0 0
> InputDevice "Mouse1" "CorePointer"
> InputDevice "Keyboard1" "CoreKeyboard"
>
> Option "AllowEmptyInput" "OFF"
Ok, lets try adding Option "AutoAddDevices" "off" here.
robert.
> EndSection
>
> Section "Files"
> # RgbPath "/usr/local/share/X11/rgb" # ***REMOVED*** via UPDATING entry 20090123:
> ModulePath "/usr/local/lib/xorg/modules"
>
> FontPath "/usr/local/lib/X11/fonts/local/"
> FontPath "/usr/local/lib/X11/fonts/misc/"
> FontPath "/usr/local/lib/X11/fonts/75dpi/:unscaled"
> FontPath "/usr/local/lib/X11/fonts/100dpi/:unscaled"
>
> FontPath "/usr/local/lib/X11/fonts/Type1/"
> FontPath "/usr/local/lib/X11/fonts/75dpi/"
> FontPath "/usr/local/lib/X11/fonts/100dpi/"
> FontPath "/usr/local/lib/X11/fonts/TTF/"
>
> FontPath "/usr/local/lib/X11/fonts/artwiz-fonts/"
> FontPath "/usr/local/lib/X11/fonts/webfonts/"
> FontPath "/usr/local/lib/X11/fonts/URW/"
> FontPath "/usr/local/lib/X11/fonts/jmk"
>
> FontPath "/usr/local/lib/X11/fonts/terminus-font"
> FontPath "/usr/local/lib/X11/fonts/artwiz-fonts"
> EndSection
>
> #Section "ServerFlags"
> #Option "AIGLX" "true"
>
> #EndSection
>
> Section "Module"
>
> # Load "pex5"
> # Load "dbe" # Double buffer extension
> # Load "extmod"
> # Option "omit xfree86-dga" # don't initialise the DGA extension
>
> # Load "type1"
> # Load "freetype"
> Load "GLcore"
> # Load "xie"
> Load "glx"
> Load "dri"
> Load "drm"
> Load "vbe"
>
> Load "int10"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard1"
> Driver "kbd"
> Option "pc101"
> EndSection
>
> Section "InputDevice"
>
> # Identifier "Mouse1"
> # Driver "mouse"
> # Option "Protocol" "AUTO"
> # Option "Device" "/dev/sysmouse"
> ## Option "ZAxisMapping" "4 5 6 7"
>
> ## Option "Buttons" "5"
> ## Option "Emulate3Buttons" "no"
> # Option "Buttons" "7"
>
> Identifier "Mouse1"
> Driver "mouse"
>
> Option "Protocol" "AUTO"
> Option "Device" "/dev/sysmouse"
> Option "Buttons" "10"
> Option "ZAxisMapping" "4 5"
> Option "ButtonMapping" "1 2 3 6 7 8 9 10 4 5"
>
> Option "Emulate3Buttons" "no"
> EndSection
>
> Section "Monitor"
>
> HorizSync 31-65
> VertRefresh 55-100
> Identifier "monitor0"
> EndSection
>
> Section "Device"
>
>
> Identifier "i810"
> Driver "intel"
> VendorName "Intel"
> BoardName "82915G/GV/910GL Express Chipset Family Graphics Controller"
> # Option "XaaNoSolidFillRect" #NEW
>
> # Option "XaaNoScreenToScreenCopy" #NEW
> # Option "XaaNoScanlineCPUToScreenColorExpandFill" #NEW
> BusID "PCI:0:2:0"
> # Option "DPMS"
> Option "NoAccel"
>
> EndSection
>
> Section "Screen"
> Identifier "Screen 1"
> Device "i810"
> Monitor "monitor0"
> DefaultDepth 16
> Subsection "Display"
> # Viewport 1152 768
>
> Modes "1280x1024" "1024x768"
> Depth 16
> EndSubSection
> EndSection
>
> Section "DRI"
> Mode 0666
> EndSection
>
>
> X.Org X Server 1.5.3
>
> Release Date: 5 November 2008
> X Protocol Version 11, Revision 0
> Build Operating System: FreeBSD 7.1-STABLE i386
> Current Operating System: FreeBSD fortytwo.zapto.org 7.1-STABLE FreeBSD 7.1-STABLE #0: Tue Jan 6 03:43:02 EST 2009 jimmie at fortytwo.zapto.org:/usr/obj/usr/src/sys/FORTYTWO i386
>
> Build Date: 25 January 2009 02:55:41PM
>
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> Markers: (--) probed, (**) from config file, (==) default setting,
>
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 25 16:32:42 2009
> (==) Using config file: "/etc/X11/xorg.conf"
>
> (==) ServerLayout "Simple Layout"
> (**) |-->Screen "Screen 1" (0)
> (**) | |-->Monitor "monitor0"
> (**) | |-->Device "i810"
> (**) |-->Input Device "Mouse1"
>
> (**) |-->Input Device "Keyboard1"
> (**) Option "AllowEmptyInput" "OFF"
> (==) Automatically adding devices
> (==) Automatically enabling devices
> (==) Including the default font path /usr/local/lib/X11/fonts/misc/,/usr/local/lib/X11/fonts/TTF/,/usr/local/lib/X11/fonts/OTF,/usr/local/lib/X11/fonts/Type1/,/usr/local/lib/X11/fonts/100dpi/,/usr/local/lib/X11/fonts/75dpi/.
>
> (**) FontPath set to:
> /usr/local/lib/X11/fonts/local/,
> /usr/local/lib/X11/fonts/misc/,
> /usr/local/lib/X11/fonts/75dpi/:unscaled,
> /usr/local/lib/X11/fonts/100dpi/:unscaled,
> /usr/local/lib/X11/fonts/Type1/,
>
> /usr/local/lib/X11/fonts/75dpi/,
> /usr/local/lib/X11/fonts/100dpi/,
> /usr/local/lib/X11/fonts/TTF/,
> /usr/local/lib/X11/fonts/artwiz-fonts/,
> /usr/local/lib/X11/fonts/webfonts/,
> /usr/local/lib/X11/fonts/URW/,
>
> /usr/local/lib/X11/fonts/jmk,
> /usr/local/lib/X11/fonts/terminus-font,
> /usr/local/lib/X11/fonts/artwiz-fonts,
> /usr/local/lib/X11/fonts/misc/,
> /usr/local/lib/X11/fonts/TTF/,
> /usr/local/lib/X11/fonts/OTF,
>
> /usr/local/lib/X11/fonts/Type1/,
> /usr/local/lib/X11/fonts/100dpi/,
> /usr/local/lib/X11/fonts/75dpi/
> (**) ModulePath set to "/usr/local/lib/xorg/modules"
> (II) Loader magic: 0x81b2de0
> (II) Module ABI versions:
>
> X.Org ANSI C Emulation: 0.4
> X.Org Video Driver: 4.1
> X.Org XInput driver : 2.1
> X.Org Server Extension : 1.1
> X.Org Font Renderer : 0.6
> (II) Loader running on freebsd
> (--) Using syscons driver with X support (version 2.0)
>
> (--) using VT number 9
>
> (--) PCI:*(0 at 0:2:0) Intel Corporation 82915G/GV/910GL Integrated Graphics Controller rev 0, Mem @ 0xcfd80000/0, 0xd0000000/0, 0xcfe80000/0, I/O @ 0x00006800/0, BIOS @ 0x????????/65536
> (--) PCI: (0 at 0:2:1) Intel Corporation 82915G Integrated Graphics Controller rev 0, Mem @ 0xcfe00000/0
>
> (II) System resource ranges:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
>
> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) "extmod" will be loaded by default.
> (II) "dbe" will be loaded by default.
> (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
>
> (II) "freetype" will be loaded by default.
> (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
> (II) LoadModule: "glx"
>
> (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
>
> (II) Module glx: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> ABI class: X.Org Server Extension, version 1.1
> (==) AIGLX disabled
> (==) Exporting typical set of GLX visuals
>
> (II) Loading extension GLX
> (II) LoadModule: "dri"
>
> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
> (II) Module dri: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
>
> ABI class: X.Org Server Extension, version 1.1
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "vbe"
>
> (II) Loading /usr/local/lib/xorg/modules//libvbe.so
> (II) Module vbe: vendor="X.Org Foundation"
>
> compiled for 1.5.3, module version = 1.1.0
> ABI class: X.Org Video Driver, version 4.1
> (II) LoadModule: "int10"
>
> (II) Loading /usr/local/lib/xorg/modules//libint10.so
> (II) Module int10: vendor="X.Org Foundation"
>
> compiled for 1.5.3, module version = 1.0.0
> ABI class: X.Org Video Driver, version 4.1
> (II) LoadModule: "extmod"
>
> (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
> (II) Module extmod: vendor="X.Org Foundation"
>
> compiled for 1.5.3, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 1.1
> (II) Loading extension SHAPE
> (II) Loading extension MIT-SUNDRY-NONSTANDARD
> (II) Loading extension BIG-REQUESTS
>
> (II) Loading extension SYNC
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XC-MISC
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-Misc
> (II) Loading extension XFree86-DGA
>
> (II) Loading extension DPMS
> (II) Loading extension TOG-CUP
> (II) Loading extension Extended-Visual-Information
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) Loading extension X-Resource
>
> (II) LoadModule: "dbe"
>
> (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
> (II) Module dbe: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> Module class: X.Org Server Extension
>
> ABI class: X.Org Server Extension, version 1.1
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "freetype"
>
> (II) Loading /usr/local/lib/xorg/modules/fonts//libfreetype.so
> (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
>
> compiled for 1.5.3, module version = 2.1.0
> Module class: X.Org Font Renderer
> ABI class: X.Org Font Renderer, version 0.6
> (II) Loading font FreeType
> (II) LoadModule: "intel"
>
> (II) Loading /usr/local/lib/xorg/modules/drivers//intel_drv.so
>
> (II) Module intel: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 2.5.1
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 4.1
> (II) LoadModule: "mouse"
>
>
> (II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so
> (II) Module mouse: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.4.0
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 2.1
>
> (II) LoadModule: "kbd"
>
> (II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so
> (II) Module kbd: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.3.2
> Module class: X.Org XInput Driver
>
> ABI class: X.Org XInput driver, version 2.1
> (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
> i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
> E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
>
> 965GM, 965GME/GLE, G33, Q35, Q33,
> Mobile Intel® GM45 Express Chipset,
> Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
> (II) Primary Device is: PCI 00 at 00:02:0
> (II) resource ranges after xf86ClaimFixedResources() call:
>
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
>
> [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) resource ranges after probing:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
>
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
>
> [8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
> (II) Loading sub module "vgahw"
> (II) LoadModule: "vgahw"
>
>
> (II) Loading /usr/local/lib/xorg/modules//libvgahw.so
> (II) Module vgahw: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 0.1.0
> ABI class: X.Org Video Driver, version 4.1
> (**) intel(0): Depth 16, (--) framebuffer bpp 16
>
> (==) intel(0): RGB weight 565
> (==) intel(0): Default visual is TrueColor
> (**) intel(0): Option "NoAccel"
> (II) intel(0): Integrated Graphics Chipset: Intel(R) 915G
> (--) intel(0): Chipset: "915G"
>
> (--) intel(0): Linear framebuffer at 0xD0000000
> (--) intel(0): IO registers at addr 0xCFD80000
> (**) intel(0): DRI is disabled because it needs HW cursor and 2D acceleration.
> (II) intel(0): 2 display pipes available.
>
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Module "ddc" already built-in
> (II) Loading sub module "i2c"
> (II) LoadModule: "i2c"
> (II) Module "i2c" already built-in
>
> (II) intel(0): Output VGA using monitor section monitor0
> (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
> (II) intel(0): I2C bus "CRTDDC_A" initialized.
> (II) intel(0): I2C bus "CRTDDC_A" removed.
>
> (II) intel(0): I2C bus "CRTDDC_A" initialized.
> (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
> (II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
> (II) intel(0): I2C bus "CRTDDC_A" removed.
>
> (II) intel(0): EDID vendor "NEC", prod id 17450
> (II) intel(0): Using hsync ranges from config file
> (II) intel(0): Using vrefresh ranges from config file
> (II) intel(0): Printing DDC gathered Modelines:
>
> (II) intel(0): Modeline "1600x1200"x0.0 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (81.2 kHz)
> (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
>
> (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
> (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
>
> (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
> (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
>
> (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
> (II) intel(0): Modeline "720x400"x0.0 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz)
>
> (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
> (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
>
> (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
> (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
>
> (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
> (II) intel(0): Modeline "1024x768"x0.0 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz)
>
> (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
> (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
>
> (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
> (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
>
> (II) intel(0): Modeline "640x480"x85.0 35.71 640 672 736 832 480 481 484 505 -hsync +vsync (42.9 kHz)
> (II) intel(0): Modeline "800x600"x85.0 56.55 800 840 928 1056 600 601 604 630 -hsync +vsync (53.5 kHz)
>
> (II) intel(0): Modeline "1024x768"x85.0 94.39 1024 1088 1200 1376 768 769 772 807 -hsync +vsync (68.6 kHz)
> (II) intel(0): Modeline "1152x864"x85.0 119.65 1152 1224 1352 1552 864 865 868 907 -hsync +vsync (77.1 kHz)
>
> (II) intel(0): Modeline "1280x960"x60.0 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync (59.6 kHz)
> (II) intel(0): Modeline "1280x1024"x75.0 138.54 1280 1368 1504 1728 1024 1025 1028 1069 -hsync +vsync (80.2 kHz)
>
> (II) intel(0): Modeline "1600x1200"x65.0 176.23 1600 1712 1888 2176 1200 1201 1204 1246 -hsync +vsync (81.0 kHz)
> (II) intel(0): EDID vendor "NEC", prod id 17450
> (II) intel(0): Output VGA connected
>
> (II) intel(0): Using user preference for initial modes
> (II) intel(0): Output VGA using initial mode 1280x1024
> (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
> (II) intel(0): detected 256 kB GTT.
>
> (II) intel(0): detected 7932 kB stolen memory.
> (==) intel(0): video overlay key set to 0x83e
> (==) intel(0): Intel XvMC decoder disabled
> (==) intel(0): Will not try to enable page flipping
> (==) intel(0): Triple buffering disabled
>
> (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
> (**) intel(0): Display dimensions: (320, 240) mm
> (**) intel(0): DPI set to (111, 148)
> (II) Loading sub module "fb"
> (II) LoadModule: "fb"
>
>
> (II) Loading /usr/local/lib/xorg/modules//libfb.so
> (II) Module fb: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> ABI class: X.Org ANSI C Emulation, version 0.4
> (II) Loading sub module "ramdac"
>
> (II) LoadModule: "ramdac"
> (II) Module "ramdac" already built-in
> (II) intel(0): Comparing regs from server start up to After PreInit
> (II) do I need RAC? No, I don't.
> (II) resource ranges after preInit:
>
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
>
> [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
> [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
> [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
>
> [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
> (II) intel(0): Kernel reported 241152 total, 0 used
> (II) intel(0): I830CheckAvailableMemory: 964608 kB available
> (**) intel(0): Framebuffer compression disabled
>
> (**) intel(0): Tiling enabled
> (==) intel(0): VideoRam: 262144 KB
> (II) intel(0): Attempting memory allocation with tiled buffers.
> (II) intel(0): Tiled allocation successful.
> (--) intel(0): Xv is disabled because it needs 2D accel and AGPGART.
>
> (II) intel(0): Page Flipping disabled
> (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
> (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
> (EE) intel(0): Failed to init memory manager
>
> (==) intel(0): Backing store disabled
> (==) intel(0): Silken mouse enabled
> (II) intel(0): Initializing HW Cursor
> (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x00800000 (pgoffset 2048)
> (II) intel(0): Fixed memory allocation layout:
>
> (II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x000000003f800000 physical
> )
> (II) intel(0): 0x0000a000-0x00011fff: logical 3D context (32 kB)
> (II) intel(0): 0x00012000-0x00111fff: fake bufmgr (1024 kB)
>
> (II) intel(0): 0x00112000-0x00112fff: overlay registers (4 kB, 0x000000003f912000 physical
> )
> (II) intel(0): 0x007bf000: end of stolen memory
> (II) intel(0): 0x00800000-0x00ffffff: front buffer (5600 kB) X tiled
>
> (II) intel(0): 0x10000000: end of aperture
> (II) intel(0): Output configuration:
> (II) intel(0): Pipe A is on
> (II) intel(0): Display plane A is now enabled and connected to pipe A.
> (II) intel(0): Pipe B is off
>
> (II) intel(0): Display plane B is now disabled and connected to pipe B.
> (II) intel(0): Output VGA is connected to pipe A
> (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
> (II) intel(0): DPMS enabled
>
> (II) intel(0): direct rendering: Disabled
> (--) RandR disabled
> (II) Initializing built-in extension MIT-SHM
> (II) Initializing built-in extension XInputExtension
> (II) Initializing built-in extension XTEST
> (II) Initializing built-in extension XKEYBOARD
>
> (II) Initializing built-in extension XINERAMA
> (II) Initializing built-in extension XFIXES
> (II) Initializing built-in extension RENDER
> (II) Initializing built-in extension RANDR
> (II) Initializing built-in extension COMPOSITE
>
> (II) Initializing built-in extension DAMAGE
> (II) Initializing built-in extension XEVIE
> (II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so
> (II) GLX: Initialized DRISWRAST GL provider for screen 0
>
> (II) intel(0): Setting screen physical size to 306 x 230
> (**) Option "Protocol" "AUTO"
> (**) Mouse1: Device: "/dev/sysmouse"
> (**) Mouse1: Protocol: "AUTO"
> (**) Option "CorePointer"
>
> (**) Mouse1: always reports core events
> (**) Option "Device" "/dev/sysmouse"
> (**) Option "Buttons" "10"
> (**) Option "Emulate3Buttons" "no"
> (**) Option "ZAxisMapping" "4 5"
>
> (**) Mouse1: ZAxisMapping: buttons 4 and 5
> (**) Option "ButtonMapping" "1 2 3 6 7 8 9 10 4 5"
> (**) Mouse1: Buttons: 10
> (**) Mouse1: Sensitivity: 1
> (**) Option "CoreKeyboard"
> (**) Keyboard1: always reports core events
>
> (**) Option "Protocol" "standard"
> (**) Keyboard1: Protocol: standard
> (**) Option "AutoRepeat" "500 30"
> (**) Option "XkbRules" "xorg"
> (**) Keyboard1: XkbRules: "xorg"
>
> (**) Option "XkbModel" "pc105"
> (**) Keyboard1: XkbModel: "pc105"
> (**) Option "XkbLayout" "us"
> (**) Keyboard1: XkbLayout: "us"
> (**) Option "CustomKeycodes" "off"
>
> (**) Keyboard1: CustomKeycodes disabled
> (II) evaluating device (Mouse1)
> (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
> (II) evaluating device (Keyboard1)
> (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
>
> (II) Mouse1: SetupAuto: hw.iftype is 4, hw.model is 0
> (II) Mouse1: SetupAuto: protocol is SysMouse
> (II) config/hal: Adding input device USB-PS/2 Optical Mouse
> (**) USB-PS/2 Optical Mouse: Device: "/dev/sysmouse"
>
> (==) USB-PS/2 Optical Mouse: Protocol: "Auto"
> (**) USB-PS/2 Optical Mouse: always reports core events
> (**) Option "Device" "/dev/sysmouse"
> (==) USB-PS/2 Optical Mouse: Emulate3Buttons, Emulate3Timeout: 50
>
> (**) USB-PS/2 Optical Mouse: ZAxisMapping: buttons 4 and 5
> (**) USB-PS/2 Optical Mouse: Buttons: 9
> (**) USB-PS/2 Optical Mouse: Sensitivity: 1
> (II) XINPUT: Adding extended input device "USB-PS/2 Optical Mouse" (type: MOUSE)
>
> (II) USB-PS/2 Optical Mouse: SetupAuto: hw.iftype is 4, hw.model is 0
> (II) USB-PS/2 Optical Mouse: SetupAuto: protocol is SysMouse
> (II) config/hal: Adding input device Natural? Ergonomic Keyboard 4000
> (**) Natural? Ergonomic Keyboard 4000: always reports core events
>
> (**) Option "Protocol" "standard"
> (**) Natural? Ergonomic Keyboard 4000: Protocol: standard
> (**) Option "Device" "/dev/ukbd0"
> (EE) Natural? Ergonomic Keyboard 4000: cannot open "/dev/ukbd0"
>
> (EE) PreInit failed for input device "Natural? Ergonomic Keyboard 4000"
> (II) UnloadModule: "kbd"
> (EE) config/hal: NewInputDeviceRequest failed
> (II) config/hal: Adding input device AT Keyboard
>
> (**) AT Keyboard: always reports core events
> (**) Option "Protocol" "standard"
> (**) AT Keyboard: Protocol: standard
> (**) Option "AutoRepeat" "500 30"
> (**) Option "XkbRules" "xorg"
>
> (**) AT Keyboard: XkbRules: "xorg"
> (**) Option "XkbModel" "pc105"
> (**) AT Keyboard: XkbModel: "pc105"
> (**) Option "XkbLayout" "us"
> (**) AT Keyboard: XkbLayout: "us"
>
> (**) Option "CustomKeycodes" "off"
> (**) AT Keyboard: CustomKeycodes disabled
> (II) XINPUT: Adding extended input device "AT Keyboard" (type: KEYBOARD)
> (II) UnloadModule: "mouse"
>
> (II) UnloadModule: "kbd"
> (II) UnloadModule: "mouse"
> (II) UnloadModule: "kbd"
> (II) intel(0): xf86UnbindGARTMemory: unbind key 3
>
>
>
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090125/d9270e15/attachment.pgp
More information about the freebsd-x11
mailing list