How do I get the xf86-video-intel to work on a DELL D610 under
FreeBSD 6.4?
Robert Noland
rnoland at FreeBSD.org
Tue Jan 20 18:02:52 PST 2009
On Wed, 2009-01-21 at 12:53 +1100, Mark Andrews wrote:
> In message <1232502158.1750.1.camel at wombat.2hip.net>, Robert Noland writes:
> >
> > --=-Bak+5erfeAFYz+f3Pqyt
> > Content-Type: text/plain
> > Content-Transfer-Encoding: quoted-printable
> >
> > On Wed, 2009-01-21 at 10:28 +1100, Mark Andrews wrote:
> > > It's there or I missing something?
> > >=20
> > > drugs:marka 10:26 {125} % grep agp /usr/src/sys/i386/conf/DRUGS=20
> > > device agp # support several AGP chipsets
> > >=20
> >
> > Ok, looking at the code in 6, it should be attaching, but doesn't appear
> > to. Send me a verbose dmesg.
> >
> > robert.
> >
>
> Copyright (c) 1992-2008 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 6.4-STABLE #22: Wed Jan 21 00:35:47 EST 2009
> marka at drugs.dv.isc.org:/usr/obj/usr/src/sys/DRUGS
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0bfc000.
> Preloaded elf module "/boot/kernel/if_iwi.ko" at 0xc0bfc1d8.
> Preloaded elf module "/boot/kernel/firmware.ko" at 0xc0bfc284.
> Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc0bfc334.
> Preloaded elf module "/boot/kernel/sound.ko" at 0xc0bfc3e0.
> Preloaded elf module "/boot/kernel/acpi_video.ko" at 0xc0bfc48c.
Ok, I think maybe I see what is going on. Try not loading acpi_video.
6 doesn't appear to have vgapci which iirc, is needed for both acpi and
agp to attach to the device.
robert.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0bfc53c.
> Preloaded elf module "/boot/kernel/wlan_acl.ko" at 0xc0bfc5e8.
> Preloaded elf module "/boot/kernel/wlan_wep.ko" at 0xc0bfc698.
> Preloaded elf module "/boot/kernel/wlan_ccmp.ko" at 0xc0bfc748.
> Preloaded elf module "/boot/kernel/wlan_tkip.ko" at 0xc0bfc7f8.
> Preloaded elf module "/boot/kernel/aio.ko" at 0xc0bfc8a8.
> Preloaded elf module "/boot/modules/kqemu.ko" at 0xc0bfc950.
> Table 'FACP' at 0x3f7d2c00
> Table 'APIC' at 0x3f7d3400
> MADT: Found table at 0x3f7d3400
> APIC: Using the MADT enumerator.
> MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
> MADT: Found CPU APIC ID 1 ACPI ID 1: disabled
> ACPI APIC Table: <DELL CPi R >
> Calibrating clock(s) ... i8254 clock: 1193227 Hz
> CLK_USE_I8254_CALIBRATION not specified - using default frequency
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Calibrating TSC clock ... TSC clock: 798056199 Hz
> CPU: Intel(R) Pentium(R) M processor 1.73GHz (798.06-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8
> Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
> Features2=0x180<EST,TM2>
> AMD Features=0x100000<NX>
> real memory = 1065160704 (1015 MB)
> Physical memory chunk(s):
> 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
> 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
> 0x0000000000c25000 - 0x000000003e5adfff, 1033408512 bytes (252297 pages)
> avail memory = 1033314304 (985 MB)
> bios32: Found BIOS32 Service Directory header at 0xc00ffe80
> bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1
> pcibios: PCI BIOS entry at 0xf0000+0xb5be
> pnpbios: Found PnP BIOS data at 0xc00fe2d0
> pnpbios: Entry = f0000:e2f4 Rev = 1.0
> pnpbios: Event flag at 4b4
> Other BIOS signatures found:
> APIC: CPU 0 has ACPI ID 0
> MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
> ioapic0: Changing APIC ID to 1
> ioapic0: Routing external 8259A's -> intpin 0
> MADT: Interrupt override: source 0, irq 2
> ioapic0: Routing IRQ 0 -> intpin 2
> MADT: Interrupt override: source 9, irq 9
> ioapic0: intpin 9 trigger: level
> lapic0: Routing NMI -> LINT1
> lapic0: LINT1 trigger: edge
> lapic0: LINT1 polarity: high
> MADT: Ignoring local NMI routed to ACPI CPU 1
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> cpu0 BSP:
> ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
> timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
> wlan: <802.11 Link Layer>
> wlan: <802.11 MAC ACL support>
> wlan: mac acl policy registered
> random: <entropy source, Software, Yarrow>
> nfslock: pseudo-device
> io: <I/O>
> kbd: new array size 4
> kbd1 at kbdmux0
> mem: <memory>
> Pentium Pro MTRR support enabled
> null: <null device, zero device>
> kqemu version 0x00010300
> kqemu: KQEMU installed, max_locked_mem=515732kB.
> rr232x: RocketRAID 232x controller driver v1.02 (Jan 21 2009 00:35:30)
> npx0: INT 16 interface
> acpi0: <DELL CPi R > on motherboard
> ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
> acpi0: [MPSAFE]
> pci_open(1): mode 1 addr port (0x0cf8) is 0x80000054
> pci_open(1a): mode1res=0x80000000 (0x80000000)
> pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25908086)
> pcibios: BIOS version 2.10
> acpi_bus_number: root bus has no _BBN, assuming 0
> AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIR1 -> bus 0 dev 31 func 0
> acpi_bus_number: root bus has no _BBN, assuming 0
> AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIR2 -> bus 0 dev 31 func 0
> acpi0: wakeup code va 0xd8a44000 pa 0x9e000
> ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> pci_link0: Index IRQ Rtd Ref IRQs
> Initial Probe 0 11 N 0 9 10 11
> Validation 0 11 N 0 9 10 11
> After Disable 0 255 N 0 9 10 11
> pci_link1: Index IRQ Rtd Ref IRQs
> Initial Probe 0 10 N 0 5 7
> Validation 0 255 N 0 5 7
> After Disable 0 255 N 0 5 7
> pci_link2: Index IRQ Rtd Ref IRQs
> Initial Probe 0 9 N 0 9 10 11
> Validation 0 9 N 0 9 10 11
> After Disable 0 255 N 0 9 10 11
> pci_link3: Index IRQ Rtd Ref IRQs
> Initial Probe 0 5 N 0 5 7 9 10 11
> Validation 0 5 N 0 5 7 9 10 11
> After Disable 0 255 N 0 5 7 9 10 11
> pci_link4: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
> pci_link5: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
> pci_link6: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
> Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
> After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
> cpu0: <ACPI CPU> on acpi0
> acpi_perf0: <ACPI CPU Frequency Control> on cpu0
> acpi_perf0: failed in PERF_STATUS attach
> device_attach: acpi_perf0 attach returned 6
> acpi_perf0: <ACPI CPU Frequency Control> on cpu0
> acpi_perf0: failed in PERF_STATUS attach
> device_attach: acpi_perf0 attach returned 6
> acpi_throttle0: <ACPI CPU Throttling> on cpu0
> acpi_throttle0: P_CNT from P_BLK 0x10e0
> acpi_acad0: <AC Adapter> on acpi0
> battery0: <ACPI Control Method Battery> on acpi0
> battery1: <ACPI Control Method Battery> on acpi0
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_button0: <Power Button> on acpi0
> acpi_button1: <Sleep Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci0: physical bus=0
> found-> vendor=0x8086, dev=0x2590, revid=0x03
> bus=0, slot=0, func=0
> class=06-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x2592, revid=0x03
> bus=0, slot=2, func=0
> class=03-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=11
> powerspec 2 supports D0 D3 current D0
> map[10]: type 1, range 32, base dff00000, size 19, enabled
> map[14]: type 4, range 32, base 0000ec38, size 3, enabled
> map[18]: type 3, range 32, base c0000000, size 28, enabled
> map[1c]: type 1, range 32, base dfec0000, size 18, enabled
> pcib0: matched entry for 0.2.INTA
> pcib0: slot 2 INTA hardwired to IRQ 16
> found-> vendor=0x8086, dev=0x2792, revid=0x03
> bus=0, slot=2, func=1
> class=03-80-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> powerspec 2 supports D0 D3 current D0
> map[10]: type 1, range 32, base dff80000, size 19, enabled
> found-> vendor=0x8086, dev=0x2660, revid=0x03
> bus=0, slot=28, func=0
> class=06-04-00, hdrtype=0x01, mfdev=1
> cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=255
> powerspec 2 supports D0 D3 current D0
> MSI supports 1 message
> found-> vendor=0x8086, dev=0x2658, revid=0x03
> bus=0, slot=29, func=0
> class=0c-03-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=11
> map[20]: type 4, range 32, base 0000bf80, size 5, enabled
> pcib0: matched entry for 0.29.INTA
> pcib0: slot 29 INTA hardwired to IRQ 16
> found-> vendor=0x8086, dev=0x2659, revid=0x03
> bus=0, slot=29, func=1
> class=0c-03-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=b, irq=10
> map[20]: type 4, range 32, base 0000bf60, size 5, enabled
> pcib0: matched entry for 0.29.INTB
> pcib0: slot 29 INTB hardwired to IRQ 17
> found-> vendor=0x8086, dev=0x265a, revid=0x03
> bus=0, slot=29, func=2
> class=0c-03-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=c, irq=9
> map[20]: type 4, range 32, base 0000bf40, size 5, enabled
> pcib0: matched entry for 0.29.INTC
> pcib0: slot 29 INTC hardwired to IRQ 18
> found-> vendor=0x8086, dev=0x265b, revid=0x03
> bus=0, slot=29, func=3
> class=0c-03-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=d, irq=5
> map[20]: type 4, range 32, base 0000bf20, size 5, enabled
> pcib0: matched entry for 0.29.INTD
> pcib0: slot 29 INTD hardwired to IRQ 19
> found-> vendor=0x8086, dev=0x265c, revid=0x03
> bus=0, slot=29, func=7
> class=0c-03-20, hdrtype=0x00, mfdev=0
> cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=11
> powerspec 2 supports D0 D3 current D0
> map[10]: type 1, range 32, base ffa80800, size 10, enabled
> pcib0: matched entry for 0.29.INTA
> pcib0: slot 29 INTA hardwired to IRQ 16
> found-> vendor=0x8086, dev=0x2448, revid=0xd3
> bus=0, slot=30, func=0
> class=06-04-01, hdrtype=0x01, mfdev=1
> cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x266e, revid=0x03
> bus=0, slot=30, func=2
> class=04-01-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=11
> powerspec 2 supports D0 D3 current D0
> map[10]: type 4, range 32, base 0000ed00, size 8, enabled
> map[14]: type 4, range 32, base 0000ec40, size 6, enabled
> map[18]: type 1, range 32, base dfebfe00, size 9, enabled
> map[1c]: type 1, range 32, base dfebfd00, size 8, enabled
> pcib0: matched entry for 0.30.INTA
> pcib0: slot 30 INTA hardwired to IRQ 16
> found-> vendor=0x8086, dev=0x266d, revid=0x03
> bus=0, slot=30, func=3
> class=07-03-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=b, irq=10
> powerspec 2 supports D0 D3 current D0
> map[10]: type 4, range 32, base 0000ee00, size 8, enabled
> map[14]: type 4, range 32, base 0000ec80, size 7, enabled
> pcib0: matched entry for 0.30.INTB
> pcib0: slot 30 INTB hardwired to IRQ 17
> found-> vendor=0x8086, dev=0x2641, revid=0x03
> bus=0, slot=31, func=0
> class=06-01-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x2653, revid=0x03
> bus=0, slot=31, func=2
> class=01-01-80, hdrtype=0x00, mfdev=0
> cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=b, irq=10
> powerspec 2 supports D0 D3 current D0
> map[20]: type 4, range 32, base 0000bfa0, size 4, enabled
> pcib0: matched entry for 0.31.INTB
> pcib0: slot 31 INTB hardwired to IRQ 17
> acpi_video0: <ACPI video extension> port 0xec38-0xec3f mem 0xdff00000-0xdff7ffff,0xc0000000-0xcfffffff,0xdfec0000-0xdfefffff irq 16 at device 2.0 on pci0
> found TV/HDTV or Analog-Video Monitor(200), idx#0, port#0, detectable by BIOS, head #0
> found VGA CRT or VESA Compatible Analog Monitor(100), idx#0, port#0, detectable by BIOS, head #0
> found Internal/Integrated Digital Flat Panel(400), idx#0, port#0, detectable by BIOS, head #0
> found External Digital Monitor(300), idx#0, port#0, detectable by BIOS, head #0
> acpi_video1: <ACPI video extension> mem 0xdff80000-0xdfffffff at device 2.1 on pci0
> evaluation of \\_SB_.PCI0.VID2._DOD makes no sense
> pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
> pcib1: secondary bus 2
> pcib1: subordinate bus 2
> pcib1: I/O decode 0xf000-0xfff
> pcib1: memory decode 0xdfd00000-0xdfdfffff
> pcib1: prefetched decode 0xfff00000-0xfffff
> pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.PXP0 - AE_NOT_FOUND
> pci2: <ACPI PCI bus> on pcib1
> pci2: physical bus=2
> found-> vendor=0x14e4, dev=0x1677, revid=0x01
> bus=2, slot=0, func=0
> class=02-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=11
> powerspec 2 supports D0 D3 current D0
> MSI supports 8 messages, 64 bit
> map[10]: type 1, range 64, base dfdf0000, size 16, enabled
> pcib1: requested memory range 0xdfdf0000-0xdfdfffff: good
> pcib0: matched entry for 0.28.INTA
> pcib0: slot 28 INTA hardwired to IRQ 16
> pcib1: slot 0 INTA is routed to irq 16
> bge0: <Broadcom BCM5750 A1, ASIC rev. 0x4001> mem 0xdfdf0000-0xdfdfffff irq 16 at device 0.0 on pci2
> bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xdfdf0000
> miibus0: <MII bus> on bge0
> brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
> brgphy0: OUI 0x000818, model 0x0018, rev. 0
> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
> bge0: bpf attached
> bge0: Ethernet address: 00:14:22:d9:fb:dc
> ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
> bge0: [MPSAFE]
> uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0xbf80-0xbf9f irq 16 at device 29.0 on pci0
> uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80
> uhci0: [GIANT-LOCKED]
> usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0xbf60-0xbf7f irq 17 at device 29.1 on pci0
> uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf60
> ioapic0: routing intpin 17 (PCI IRQ 17) to vector 50
> uhci1: [GIANT-LOCKED]
> usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xbf40-0xbf5f irq 18 at device 29.2 on pci0
> uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf40
> ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51
> uhci2: [GIANT-LOCKED]
> usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0xbf20-0xbf3f irq 19 at device 29.3 on pci0
> uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf20
> ioapic0: routing intpin 19 (PCI IRQ 19) to vector 52
> uhci3: [GIANT-LOCKED]
> usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
> usb3: USB revision 1.0
> uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xffa80800-0xffa80bff irq 16 at device 29.7 on pci0
> ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xffa80800
> ehci0: [GIANT-LOCKED]
> usb4: EHCI version 1.0
> usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
> usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
> usb4: USB revision 2.0
> uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pcib2: secondary bus 3
> pcib2: subordinate bus 4
> pcib2: I/O decode 0xf000-0xfff
> pcib2: memory decode 0xdfc00000-0xdfcfffff
> pcib2: prefetched decode 0xfff00000-0xfffff
> pcib2: Subtractively decoded bridge.
> pci3: <ACPI PCI bus> on pcib2
> pci3: physical bus=3
> found-> vendor=0x104c, dev=0x8036, revid=0x00
> bus=3, slot=1, func=0
> class=06-07-00, hdrtype=0x02, mfdev=1
> cmdreg=0x0000, statreg=0x0210, cachelnsz=16 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns)
> intpin=a, irq=255
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[10]: type 1, range 32, base 00000000, size 12, memory disabled
> found-> vendor=0x104c, dev=0x8038, revid=0x00
> bus=3, slot=1, func=5
> class=07-80-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0102, statreg=0x0210, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=5
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[10]: type 1, range 32, base dfcfd000, size 12, enabled
> pcib2: requested memory range 0xdfcfd000-0xdfcfdfff: good
> map[14]: type 1, range 32, base dfcfe000, size 12, enabled
> pcib2: requested memory range 0xdfcfe000-0xdfcfefff: good
> pcib2: matched entry for 3.1.INTA
> pcib2: slot 1 INTA hardwired to IRQ 19
> found-> vendor=0x8086, dev=0x4220, revid=0x05
> bus=3, slot=3, func=0
> class=02-80-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0116, statreg=0x0290, cachelnsz=16 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x18 (6000 ns)
> intpin=a, irq=10
> powerspec 2 supports D0 D3 current D0
> map[10]: type 1, range 32, base dfcff000, size 12, enabled
> pcib2: requested memory range 0xdfcff000-0xdfcfffff: good
> pcib2: matched entry for 3.3.INTA
> pcib2: slot 3 INTA hardwired to IRQ 17
> cbb0: <PCI-CardBus Bridge> at device 1.0 on pci3
> pcib2: cbb0 requested memory range 0xdfc00000-0xdfcfffff: good
> cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xdfc00000
> cardbus0: <CardBus bus> on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> pcib2: matched entry for 3.1.INTA
> pcib2: slot 1 INTA hardwired to IRQ 19
> cbb0: [MPSAFE]
> cbb0: PCI Configuration space:
> 0x00: 0x8036104c 0x02100007 0x06070000 0x00824010
> 0x10: 0xdfc00000 0x020000a0 0x20040403 0xfffff000
> 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
> 0x30: 0x00000000 0xfffffffc 0x00000000 0x07400113
> 0x40: 0x01821028 0x00000001 0x00000000 0x00000000
> 0x50: 0x00000000 0x00000000 0x00000000 0x00000000
> 0x60: 0x00000000 0x00000000 0x00000000 0x00000000
> 0x70: 0x00000000 0x00000000 0x00000000 0x00000000
> 0x80: 0x0840d061 0x047f0019 0x00030000 0x01111122
> 0x90: 0x606482c0 0x00000000 0x00000000 0x00000000
> 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000
> 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
> 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
> 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
> 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
> 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
> pci3: <simple comms> at device 1.5 (no driver attached)
> iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xdfcff000-0xdfcfffff irq 17 at device 3.0 on pci3
> iwi0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdfcff000
> iwi0: bpf attached
> iwi0: Ethernet address: 00:16:6f:46:b7:5d
> iwi0: bpf attached
> iwi0: bpf attached
> iwi0: [MPSAFE]
> iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> pcm0: <Intel ICH6 (82801FB)> port 0xed00-0xedff,0xec40-0xec7f mem 0xdfebfe00-0xdfebffff,0xdfebfd00-0xdfebfdff irq 16 at device 30.2 on pci0
> pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xdfebfe00
> pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xdfebfd00
> pcm0: [MPSAFE]
> pcm0: <SigmaTel STAC9750/51 AC97 Codec (id = 0x83847650)>
> pcm0: Codec features headphone, 20 bit DAC, 20 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement
> pcm0: Primary codec extended features variable rate PCM, reserved 1, AMAP, reserved 4
> pcm0: ac97 codec dac ready count: 0
> pcm0: Mixer "vol":
> pcm0: Mixer "pcm":
> pcm0: Mixer "speaker":
> pcm0: Mixer "line":
> pcm0: Mixer "mic":
> pcm0: Mixer "cd":
> pcm0: Mixer "rec":
> pcm0: Mixer "igain":
> pcm0: Mixer "ogain":
> pcm0: Mixer "line1":
> pcm0: Mixer "phin":
> pcm0: Mixer "phout":
> pcm0: Mixer "video":
> pcm0: sndbuf_setmap 3e224000, 4000; 0xe4f80000 -> 3e224000
> pcm0: sndbuf_setmap 3e220000, 4000; 0xe4f84000 -> 3e220000
> pci0: <simple comms, generic modem> at device 30.3 (no driver attached)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH6M SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf irq 17 at device 31.2 on pci0
> atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0
> ata0: <ATA channel 0> on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
> atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
> ata0: reset tp1 mask=03 ostat0=50 ostat1=00
> ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
> ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
> ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
> ioapic0: routing intpin 14 (ISA IRQ 14) to vector 53
> ata0: [MPSAFE]
> ata1: <ATA channel 1> on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
> atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
> ata1: reset tp1 mask=03 ostat0=50 ostat1=00
> ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
> ata1: stat1=0x00 err=0x04 lsb=0x00 msb=0x00
> ata1: reset tp2 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
> ioapic0: routing intpin 15 (ISA IRQ 15) to vector 54
> ata1: [MPSAFE]
> acpi_tz0: <Thermal Zone> on acpi0
> psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0065
> atkbd: keyboard ID 0x41ab (2)
> kbd0 at atkbd0
> kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
> ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55
> atkbd0: [GIANT-LOCKED]
> psm0: current command byte:0065
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> ioapic0: routing intpin 12 (ISA IRQ 12) to vector 56
> psm0: [GIANT-LOCKED]
> psm0: model GlidePoint, device ID 0-00, 2 buttons
> psm0: config:00000000, flags:00000008, packet size:3
> psm0: syncmask:c0, syncbits:00
> sio0: irq maps: 0x8e21 0x8e31 0x8e21 0x8e21
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> sio0: type 16550A
> ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57
> sio1: irq maps: 0x8e21 0x8e29 0x8e21 0x8e21
> sio1 port 0x2f8-0x2ff,0x280-0x287 irq 3 drq 3 on acpi0
> sio1: type 16550A
> ioapic0: routing intpin 3 (ISA IRQ 3) to vector 58
> ppc0: using extended I/O port range
> ppc0: ECP SPP ECP+EPP SPP
> ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 1 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/8 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> plip0: <PLIP network interface> on ppbus0
> plip0: bpf attached
> ioapic0: routing intpin 7 (ISA IRQ 7) to vector 59
> ex_isa_identify()
> unknown: status reg test failed ff
> unknown: status reg test failed ff
> unknown: status reg test failed ff
> unknown: status reg test failed ff
> unknown: status reg test failed ff
> unknown: status reg test failed ff
> ata: ata0 already exists; skipping it
> ata: ata1 already exists; skipping it
> atkbdc: atkbdc0 already exists; skipping it
> ppc: ppc0 already exists; skipping it
> sio: sio0 already exists; skipping it
> sio: sio1 already exists; skipping it
> pnp_identify: Trying Read_Port at 203
> pnp_identify: Trying Read_Port at 243
> pnp_identify: Trying Read_Port at 283
> pnp_identify: Trying Read_Port at 2c3
> pnp_identify: Trying Read_Port at 303
> pnp_identify: Trying Read_Port at 343
> pnp_identify: Trying Read_Port at 383
> pnp_identify: Trying Read_Port at 3c3
> PNP Identify complete
> ahc_isa_probe 0: ioport 0xc00 alloc failed
> ahc_isa_probe 1: ioport 0x1c00 alloc failed
> ahc_isa_probe 2: ioport 0x2c00 alloc failed
> ahc_isa_probe 3: ioport 0x3c00 alloc failed
> ahc_isa_probe 4: ioport 0x4c00 alloc failed
> ahc_isa_probe 5: ioport 0x5c00 alloc failed
> ahc_isa_probe 6: ioport 0x6c00 alloc failed
> ahc_isa_probe 7: ioport 0x7c00 alloc failed
> ahc_isa_probe 8: ioport 0x8c00 alloc failed
> ahc_isa_probe 9: ioport 0x9c00 alloc failed
> ahc_isa_probe 10: ioport 0xac00 alloc failed
> ahc_isa_probe 11: ioport 0xbc00 alloc failed
> ahc_isa_probe 12: ioport 0xcc00 alloc failed
> ahc_isa_probe 13: ioport 0xdc00 alloc failed
> ahc_isa_probe 14: ioport 0xec00 alloc failed
> sc: sc0 already exists; skipping it
> vga: vga0 already exists; skipping it
> isa_probe_children: disabling PnP devices
> isa_probe_children: probing non-PnP devices
> pmtimer0 on isa0
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xcffff on isa0
> adv0: not probed (disabled)
> aha0: not probed (disabled)
> aic0: not probed (disabled)
> bt0: not probed (disabled)
> cs0: not probed (disabled)
> ed0: not probed (disabled)
> fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> fe0: not probed (disabled)
> ie0: not probed (disabled)
> lnc0: not probed (disabled)
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
> sio2: not probed (disabled)
> sio3: not probed (disabled)
> sn0: not probed (disabled)
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> vt0: not probed (disabled)
> isa_probe_children: probing PnP devices
> Device configuration finished.
> procfs registered
> lapic: Divisor 2, Frequency 66504694 hz
> Timecounter "TSC" frequency 798056199 Hz quality 800
> Timecounters tick every 1.000 msec
> ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to deny, logging disabled
> lo0: bpf attached
> rr232x: no controller detected.
> acpi_acad0: acline initialization start
> battery0: battery initialization start
> battery1: battery initialization start
> acpi_acad0: On Line
> acpi_acad0: acline initialization done, tried 1 times
> battery0: battery initialization done, tried 1 times
> ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
> ad0: 95396MB <Hitachi HTS721010G9AT00 MCZOA53A> at ata0-master UDMA100
> ad0: 195371568 sectors [193821C/16H/63S] 16 sectors/interrupt 1 depth queue
> GEOM: new disk ad0
> ad0: Intel check1 failed
> ad0: Adaptec check1 failed
> ad0: LSI (v3) check1 failed
> ad0: LSI (v2) check1 failed
> ad0: FreeBSD check1 failed
> ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
> acd0: <TSSTcorpCD-RW/DVD-ROM TSL462C/DE01> CDRW drive at ata1 as master
> acd0: read 1722KB/s (4134KB/s) write 172KB/s (4134KB/s), 1536KB buffer, UDMA33
> acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
> acd0: Writes: CDR, CDRW, test write, burnproof
> acd0: Audio: play, 256 volume levels
> acd0: Mechanism: ejectable tray, unlocked
> acd0: Medium: no/blank disc
> pcm0: measured ac97 link rate at 48006 Hz, will use 48000 Hz
> ATA PseudoRAID loaded
> Trying to mount root from ufs:/dev/ad0s4a
> start_init: trying /sbin/init
> Linux ELF exec handler installed
> linprocfs registered
> bge0: link UP
> firmware: 'iwi_bss' version 300: 191142 bytes loaded at 0xc5059000
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090121/19d7965f/attachment.pgp
More information about the freebsd-x11
mailing list