KDE 4.2 & desktop effects on Intel
Adam K Kirchhoff
adamk at voicenet.com
Mon Feb 9 14:06:13 PST 2009
On Mon, 09 Feb 2009 22:49:58 +0100
Ivan Voras <ivoras at freebsd.org> wrote:
> Hi,
>
> I've successfully (or so it seems) installed KDE 4.2 on my Acer Aspire
> One "netbook". The things I tried work ok, except one thing: I can't
> turn on "desktop effects" in KDE. AFAIK this relies on compositing and
> OpenGL, which I know work on this hardware since before this there was
> Ubuntu Linux on it (with desktop-cube, etc). KDE doesn't want to enable
> both OpenGL and XRender modes.
According to the output below, it looks like AIGLX is getting disabled
by default:
(==) AIGLX disabled
Try creating a new xorg.conf file and enabling AIGLX in the
ServerLayout section.
Adam
> I don't have xorg.conf, everything is autodetected.
>
> Here's Xorg.log:
>
> X.Org X Server 1.5.3
> Release Date: 5 November 2008
> X Protocol Version 11, Revision 0
> Build Operating System: FreeBSD 7.1-RELEASE i386
> Current Operating System: FreeBSD bellatrix.cosmos 7.1-STABLE FreeBSD
> 7.1-STABLE #0: Sun Feb 8 05:52:55 CET 2009
> ivoras at bellatrix.cosmos:/usr/obj/usr/src/sys/GENERIC i386
> Build Date: 07 February 2009 11:10:38PM
>
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 9 21:33:59 2009
> (EE) Unable to locate/open config file
> (II) Loader magic: 0x81bcde0
> (II) Module ABI versions:
> X.Org ANSI C Emulation: 0.4
> X.Org Video Driver: 4.1
> X.Org XInput driver : 2.1
> X.Org Server Extension : 1.1
> X.Org Font Renderer : 0.6
> (II) Loader running on freebsd
> (--) Using syscons driver with X support (version 2.0)
> (--) using VT number 9
>
> (--) PCI:*(0 at 0:2:0) Intel Corporation Mobile 945GME Express Integrated
> Graphics Controller rev 3, Mem @ 0x58480000/0, 0x40000000/0,
> 0x58500000/0, I/O @ 0x000060c0/0, BIOS @ 0x????????/65536
> (--) PCI: (0 at 0:2:1) Intel Corporation Mobile 945GM/GMS/GME, 943/940GML
> Express Integrated Graphics Controller rev 3, Mem @ 0x58400000/0
> (==) Matched intel for the autoconfigured driver
> New driver is "intel"
> (==) Using default built-in configuration (30 lines)
> (==) --- Start of built-in configuration ---
> Section "Device"
> Identifier "Builtin Default intel Device 0"
> Driver "intel"
> EndSection
> Section "Screen"
> Identifier "Builtin Default intel Screen 0"
> Device "Builtin Default intel Device 0"
> EndSection
> Section "Device"
> Identifier "Builtin Default fbdev Device 0"
> Driver "fbdev"
> EndSection
> Section "Screen"
> Identifier "Builtin Default fbdev Screen 0"
> Device "Builtin Default fbdev Device 0"
> EndSection
> Section "Device"
> Identifier "Builtin Default vesa Device 0"
> Driver "vesa"
> EndSection
> Section "Screen"
> Identifier "Builtin Default vesa Screen 0"
> Device "Builtin Default vesa Device 0"
> EndSection
> Section "ServerLayout"
> Identifier "Builtin Default Layout"
> Screen "Builtin Default intel Screen 0"
> Screen "Builtin Default fbdev Screen 0"
> Screen "Builtin Default vesa Screen 0"
> EndSection
> (==) --- End of built-in configuration ---
> (==) ServerLayout "Builtin Default Layout"
> (**) |-->Screen "Builtin Default intel Screen 0" (0)
> (**) | |-->Monitor "<default monitor>"
> (**) | |-->Device "Builtin Default intel Device 0"
> (==) No monitor specified for screen "Builtin Default intel Screen 0".
> Using a default monitor configuration.
> (**) |-->Screen "Builtin Default fbdev Screen 0" (1)
> (**) | |-->Monitor "<default monitor>"
> (**) | |-->Device "Builtin Default fbdev Device 0"
> (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
> Using a default monitor configuration.
> (**) |-->Screen "Builtin Default vesa Screen 0" (2)
> (**) | |-->Monitor "<default monitor>"
> (**) | |-->Device "Builtin Default vesa Device 0"
> (==) No monitor specified for screen "Builtin Default vesa Screen 0".
> Using a default monitor configuration.
> (==) Automatically adding devices
> (==) Automatically enabling devices
> (==) No FontPath specified. Using compiled-in default.
> (==) FontPath set to:
> /usr/local/lib/X11/fonts/misc/,
> /usr/local/lib/X11/fonts/TTF/,
> /usr/local/lib/X11/fonts/OTF,
> /usr/local/lib/X11/fonts/Type1/,
> /usr/local/lib/X11/fonts/100dpi/,
> /usr/local/lib/X11/fonts/75dpi/
> (==) ModulePath set to "/usr/local/lib/xorg/modules"
> (II) Cannot locate a core pointer device.
> (II) Cannot locate a core keyboard device.
> (II) The server relies on HAL to provide the list of input devices.
> If no devices become available, reconfigure HAL or disable
> AllowEmptyInput.
> (II) System resource ranges:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) LoadModule: "extmod"
>
> (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
> (II) Module extmod: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 1.1
> (II) Loading extension SHAPE
> (II) Loading extension MIT-SUNDRY-NONSTANDARD
> (II) Loading extension BIG-REQUESTS
> (II) Loading extension SYNC
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XC-MISC
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-Misc
> (II) Loading extension XFree86-DGA
> (II) Loading extension DPMS
> (II) Loading extension TOG-CUP
> (II) Loading extension Extended-Visual-Information
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) Loading extension X-Resource
> (II) LoadModule: "dbe"
>
> (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
> (II) Module dbe: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 1.1
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "glx"
>
> (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
> (II) Module glx: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> ABI class: X.Org Server Extension, version 1.1
> (==) AIGLX disabled
> (==) Exporting typical set of GLX visuals
> (II) Loading extension GLX
> (II) LoadModule: "freetype"
>
> (II) Loading /usr/local/lib/xorg/modules/fonts//libfreetype.so
> (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
> compiled for 1.5.3, module version = 2.1.0
> Module class: X.Org Font Renderer
> ABI class: X.Org Font Renderer, version 0.6
> (II) Loading font FreeType
> (II) LoadModule: "record"
>
> (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
> (II) Module record: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.13.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 1.1
> (II) Loading extension RECORD
> (II) LoadModule: "dri"
>
> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
> (II) Module dri: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> ABI class: X.Org Server Extension, version 1.1
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "intel"
>
> (II) Loading /usr/local/lib/xorg/modules/drivers//intel_drv.so
> (II) Module intel: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 2.5.1
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 4.1
> (II) LoadModule: "fbdev"
>
> (WW) Warning, couldn't open module fbdev
> (II) UnloadModule: "fbdev"
> (EE) Failed to load module "fbdev" (module does not exist, 0)
> (II) LoadModule: "vesa"
>
> (II) Loading /usr/local/lib/xorg/modules/drivers//vesa_drv.so
> (II) Module vesa: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 2.1.0
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 4.1
> (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
> i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
> E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
> 965GM, 965GME/GLE, G33, Q35, Q33,
> Mobile Intel® GM45 Express Chipset,
> Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
> (II) VESA: driver for VESA chipsets: vesa
> (II) Primary Device is: PCI 00 at 00:02:0
> (II) resource ranges after xf86ClaimFixedResources() call:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (WW) Falling back to old probe method for vesa
> (II) resource ranges after probing:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
> (II) Loading sub module "vgahw"
> (II) LoadModule: "vgahw"
>
> (II) Loading /usr/local/lib/xorg/modules//libvgahw.so
> (II) Module vgahw: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 0.1.0
> ABI class: X.Org Video Driver, version 4.1
> (II) intel(0): Creating default Display subsection in Screen section
> "Builtin Default intel Screen 0" for depth/fbbpp 24/32
> (==) intel(0): Depth 24, (==) framebuffer bpp 32
> (==) intel(0): RGB weight 888
> (==) intel(0): Default visual is TrueColor
> (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
> (--) intel(0): Chipset: "945GME"
> (--) intel(0): Linear framebuffer at 0x40000000
> (--) intel(0): IO registers at addr 0x58480000
> (==) intel(0): Using EXA for acceleration
> (II) intel(0): 2 display pipes available.
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Module "ddc" already built-in
> (II) Loading sub module "i2c"
> (II) LoadModule: "i2c"
> (II) Module "i2c" already built-in
> (II) intel(0): Output VGA has no monitor section
> (II) intel(0): Output LVDS has no monitor section
> (II) intel(0): I2C bus "LVDSDDC_C" initialized.
> (II) intel(0): Attempting to determine panel fixed mode.
> (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
> (II) intel(0): EDID vendor "AUO", prod id 4546
> (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
> (II) intel(0): EDID vendor "AUO", prod id 4546
> (II) intel(0): Output VGA disconnected
> (II) intel(0): Output LVDS connected
> (II) intel(0): Using exact sizes for initial modes
> (II) intel(0): Output LVDS using initial mode 1024x600
> (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
> (II) intel(0): Monitoring connected displays enabled
> (II) intel(0): detected 256 kB GTT.
> (II) intel(0): detected 7932 kB stolen memory.
> (==) intel(0): video overlay key set to 0x101fe
> (==) intel(0): Intel XvMC decoder disabled
> (==) intel(0): Will not try to enable page flipping
> (==) intel(0): Triple buffering disabled
> (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
> (==) intel(0): DPI set to (96, 96)
> (II) Loading sub module "fb"
> (II) LoadModule: "fb"
>
> (II) Loading /usr/local/lib/xorg/modules//libfb.so
> (II) Module fb: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> ABI class: X.Org ANSI C Emulation, version 0.4
> (II) Loading sub module "exa"
> (II) LoadModule: "exa"
>
> (II) Loading /usr/local/lib/xorg/modules//libexa.so
> (II) Module exa: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 2.4.0
> ABI class: X.Org Video Driver, version 4.1
> (II) Loading sub module "ramdac"
> (II) LoadModule: "ramdac"
> (II) Module "ramdac" already built-in
> (II) intel(0): Comparing regs from server start up to After PreInit
> (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to
> 0xd000000a
> (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
> (WW) intel(0): PP_STATUS after: on, ready, sequencing on
> (WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000202 to
> 0x80000202
> (WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS
> (WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS
> VBLANK_INT_STATUS
> (II) UnloadModule: "vesa"
> (II) Unloading /usr/local/lib/xorg/modules/drivers//vesa_drv.so
> (==) Depth 24 pixmap format is 32 bpp
> (II) do I need RAC? No, I don't.
> (II) resource ranges after preInit:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
> [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
> [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
> [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
> [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
> (II) intel(0): Kernel reported 241152 total, 0 used
> (II) intel(0): I830CheckAvailableMemory: 964608 kB available
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmOpenByBusid: Searching for BusID pci:0000:00:02.0
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmOpenByBusid: drmOpenMinor returns 11
> drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
> (II) [drm] DRM interface version 1.2
> (II) [drm] DRM open master succeeded.
> (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
> (II) intel(0): [drm] framebuffer mapped by ddx driver
> (II) intel(0): [drm] added 1 reserved context for kernel
> (II) intel(0): X context handle = 0x1
> (II) intel(0): [drm] installed DRM signal handler
> (**) intel(0): Framebuffer compression enabled
> (**) intel(0): Tiling enabled
> (==) intel(0): VideoRam: 262144 KB
> (II) intel(0): Attempting memory allocation with tiled buffers.
> (II) intel(0): Tiled allocation successful.
> (II) intel(0): [drm] Registers = 0x58480000
> (II) intel(0): [drm] ring buffer = 0x40000000
> (II) intel(0): [drm] mapped front buffer at 0x40800000, handle = 0x40800000
> (II) intel(0): [drm] mapped back buffer at 0x41800000, handle = 0x41800000
> (II) intel(0): [drm] mapped depth buffer at 0x41c00000, handle = 0x41c00000
> (II) intel(0): [drm] mapped classic textures at 0x42000000, handle =
> 0x42000000
> (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
> (II) intel(0): [dri] visual configs initialized
> (II) intel(0): Page Flipping disabled
> (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
> 0x0000
> (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
> (II) EXA(0): Offscreen pixmap area of 12582912 bytes
> (II) EXA(0): Driver registered support for the following operations:
> (II) Solid
> (II) Copy
> (II) Composite (RENDER acceleration)
> (==) intel(0): Backing store disabled
> (==) intel(0): Silken mouse enabled
> (II) intel(0): Initializing HW Cursor
> (II) intel(0): [DRI] installation complete
> (II) intel(0): xf86BindGARTMemory: bind key 22 at 0x00800000 (pgoffset 2048)
> (II) intel(0): xf86BindGARTMemory: bind key 23 at 0x00c00000 (pgoffset 3072)
> (II) intel(0): xf86BindGARTMemory: bind key 24 at 0x01800000 (pgoffset 6144)
> (II) intel(0): xf86BindGARTMemory: bind key 25 at 0x01c00000 (pgoffset 7168)
> (II) intel(0): xf86BindGARTMemory: bind key 26 at 0x02000000 (pgoffset 8192)
> (II) intel(0): Fixed memory allocation layout:
> (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
> (II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB,
> 0x000000003f820000 physical
> )
> (II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB,
> 0x000000003fe20000 physical
> )
> (II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB,
> 0x000000003fe21000 physical
> )
> (II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
> (II) intel(0): 0x00633000-0x00732fff: fake bufmgr (1024 kB)
> (II) intel(0): 0x00733000-0x00733fff: overlay registers (4 kB,
> 0x000000003ff33000 physical
> )
> (II) intel(0): 0x007bf000: end of stolen memory
> (II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
> (II) intel(0): 0x00c00000-0x017fffff: exa offscreen (12288 kB)
> (II) intel(0): 0x01800000-0x01bfffff: back buffer (4096 kB) X tiled
> (II) intel(0): 0x01c00000-0x01ffffff: depth buffer (4096 kB) X tiled
> (II) intel(0): 0x02000000-0x03ffffff: classic textures (32768 kB)
> (II) intel(0): 0x10000000: end of aperture
> (WW) intel(0): ESR is 0x00000001, instruction error
> (WW) intel(0): Existing errors found in hardware state.
> (II) intel(0): using SSC reference clock of 96 MHz
> (II) intel(0): Selecting standard 18 bit TMDS pixel format.
> (II) intel(0): Output configuration:
> (II) intel(0): Pipe A is off
> (II) intel(0): Display plane A is now disabled and connected to pipe A.
> (II) intel(0): Pipe B is on
> (II) intel(0): Display plane B is now enabled and connected to pipe B.
> (II) intel(0): Output VGA is connected to pipe none
> (II) intel(0): Output LVDS is connected to pipe B
> (II) intel(0): [drm] dma control initialized, using IRQ 16
> (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled
> message.
> (II) intel(0): DPMS enabled
> (II) intel(0): Set up textured video
> (II) intel(0): Set up overlay video
> (II) intel(0): direct rendering: Enabled
> (--) RandR disabled
> (II) Initializing built-in extension MIT-SHM
> (II) Initializing built-in extension XInputExtension
> (II) Initializing built-in extension XTEST
> (II) Initializing built-in extension XKEYBOARD
> (II) Initializing built-in extension XINERAMA
> (II) Initializing built-in extension XFIXES
> (II) Initializing built-in extension RENDER
> (II) Initializing built-in extension RANDR
> (II) Initializing built-in extension COMPOSITE
> (II) Initializing built-in extension DAMAGE
> (II) Initializing built-in extension XEVIE
> (II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so
> (II) GLX: Initialized DRISWRAST GL provider for screen 0
> (II) intel(0): Setting screen physical size to 195 x 113
> (II) config/hal: Adding input device AT Keyboard
> (II) LoadModule: "kbd"
>
> (II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so
> (II) Module kbd: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.3.2
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 2.1
> (**) AT Keyboard: always reports core events
> (**) Option "Protocol" "standard"
> (**) AT Keyboard: Protocol: standard
> (**) Option "AutoRepeat" "500 30"
> (**) Option "XkbRules" "xorg"
> (**) AT Keyboard: XkbRules: "xorg"
> (**) Option "XkbModel" "pc105"
> (**) AT Keyboard: XkbModel: "pc105"
> (**) Option "XkbLayout" "us"
> (**) AT Keyboard: XkbLayout: "us"
> (**) Option "CustomKeycodes" "off"
> (**) AT Keyboard: CustomKeycodes disabled
> (II) XINPUT: Adding extended input device "AT Keyboard" (type: KEYBOARD)
> (II) config/hal: Adding input device PS/2 Mouse
> (II) LoadModule: "mouse"
>
> (II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so
> (II) Module mouse: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.4.0
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 2.1
> (**) PS/2 Mouse: Device: "/dev/sysmouse"
> (==) PS/2 Mouse: Protocol: "Auto"
> (**) PS/2 Mouse: always reports core events
> (**) Option "Device" "/dev/sysmouse"
> (==) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 50
> (**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5
> (**) PS/2 Mouse: Buttons: 9
> (**) PS/2 Mouse: Sensitivity: 1
> (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
> (II) PS/2 Mouse: SetupAuto: hw.iftype is 4, hw.model is 0
> (II) PS/2 Mouse: SetupAuto: protocol is SysMouse
>
>
> Here's what glxinfo says:
>
> name of display: :0.0
> display: :0 screen: 0
> direct rendering: Yes
> server glx vendor string: SGI
> server glx version string: 1.2
> server glx extensions:
> GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
> GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
> GLX_OML_swap_method,
> GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
> GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
> client glx vendor string: SGI
> client glx version string: 1.4
> client glx extensions:
> GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
> GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
> GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
> GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
> GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
> GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
> GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
> GLX version: 1.2
> GLX extensions:
> GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
> GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
> GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
> GLX_SGI_make_current_read, GLX_SGI_video_sync, GLX_SGIS_multisample,
> GLX_SGIX_fbconfig
> OpenGL vendor string: Tungsten Graphics, Inc
> OpenGL renderer string: Mesa DRI Intel(R) 945GME 20090114 x86/MMX/SSE2
> OpenGL version string: 1.4 Mesa 7.3
> OpenGL extensions:
> GL_ARB_depth_texture, GL_ARB_fragment_program, GL_ARB_multisample,
> GL_ARB_multitexture, GL_ARB_point_parameters, GL_ARB_shadow,
> GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
> GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
> GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
> GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
> GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle,
> GL_ARB_transpose_matrix, GL_ARB_vertex_buffer_object,
> GL_ARB_vertex_program, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra,
> GL_EXT_blend_color, GL_EXT_blend_equation_separate,
> GL_EXT_blend_func_separate, GL_EXT_blend_logic_op, GL_EXT_blend_minmax,
> GL_EXT_blend_subtract, GL_EXT_clip_volume_hint, GL_EXT_cull_vertex,
> GL_EXT_compiled_vertex_array, GL_EXT_copy_texture,
> GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_multi_draw_arrays,
> GL_EXT_packed_depth_stencil, GL_EXT_packed_pixels,
> GL_EXT_point_parameters, GL_EXT_polygon_offset, GL_EXT_rescale_normal,
> GL_EXT_secondary_color, GL_EXT_separate_specular_color,
> GL_EXT_shadow_funcs, GL_EXT_stencil_wrap, GL_EXT_subtexture,
> GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
> GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
> GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
> GL_EXT_texture_lod_bias, GL_EXT_texture_object,
> GL_EXT_texture_rectangle,
> GL_EXT_vertex_array, GL_3DFX_texture_compression_FXT1,
> GL_APPLE_client_storage, GL_APPLE_packed_pixels,
> GL_ATI_blend_equation_separate, GL_ATI_texture_env_combine3,
> GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
> GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
> GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
> GL_NV_point_sprite, GL_NV_texture_rectangle, GL_NV_texgen_reflection,
> GL_NV_vertex_program, GL_NV_vertex_program1_1, GL_OES_read_format,
> GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
> GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_depth_texture,
> GL_SUN_multi_draw_arrays
>
> 3 GLX Visuals
> visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
> id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
> ----------------------------------------------------------------------
> 0x21 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
> 0x22 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
> 0x52 32 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
>
> 16 GLXFBConfigs:
> visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
> id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
> ----------------------------------------------------------------------
> 0x53 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
> 0x54 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
> 0x55 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
> 0x56 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
> 0x5f 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
> 0x60 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
> 0x61 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
> 0x62 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
> 0x63 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
> 0x64 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
> 0x65 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
> 0x66 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
> 0x6f 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
> 0x70 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
> 0x71 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
> 0x72 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
>
> glxgears runs at 61-62 FPS, which looks suspiciously similar to the
> refresh rate.
>
> If more information is needed, please ask. It might be a KDE error but I
> can't find KDE logs (if there are any) and the GUI message is generic.
>
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
More information about the freebsd-x11
mailing list