xf86-video-intel-2.6.3 resolution issues [fixed?]
Robert Noland
rnoland at FreeBSD.org
Mon Apr 6 23:28:45 UTC 2009
On Mon, 2009-04-06 at 18:59 -0400, Jimmie James wrote:
> After removing HorizSync and VertRefresh from xorg.conf xrandr happily
> shows
> #xrandr
> Screen 0: minimum 320 x 200, current 1600 x 1200, maximum 1600 x 1600
> VGA connected 1600x1200+0+0 (normal left inverted right x axis y axis)
> 306mm x 230mm
> 1600x1200 65.0*
> 1280x1024 75.0
> 1280x960 60.0
> 1152x864 75.0
> 1024x768 85.0 75.0 70.1 60.0 43.5
> 832x624 74.6
> 800x600 85.1 72.2 75.0 60.3 56.2
> 640x480 85.0 75.0 72.8 66.7 59.9
> 720x400 87.8 70.1
>
> Though, using the default of 1600x1200 redraw is slow, jittery.
> and seeing this in the Xorg.log
> exaCopyDirty: Pending damage region empty!
All indications are that this is harmless...
robert.
>
> (--) PCI: (0 at 0:2:1) Intel Corporation 82915G Integrated Graphics
> Controller rev 4, Mem @ 0xcfe00000/524288
>
> (this seems to be repeated after first run of mplayer, or vlc:
> (II) intel(0): Printing DDC gathered Modelines:
> (II) intel(0): Modeline "1600x1200"x0.0 175.50 1600 1664 1856 2160
> 1200 1201 1204 1250 +hsync +vsync (81.2 kHz)
> (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601
> 605 628 +hsync +vsync (37.9 kHz)
> (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601
> 603 625 +hsync +vsync (35.2 kHz)
> (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481
> 484 500 -hsync -vsync (37.5 kHz)
> (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489
> 492 520 -hsync -vsync (37.9 kHz)
> (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483
> 486 525 -hsync -vsync (35.0 kHz)
> (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490
> 492 525 -hsync -vsync (31.5 kHz)
> (II) intel(0): Modeline "720x400"x0.0 35.50 720 738 846 900 400 421
> 423 449 -hsync -vsync (39.4 kHz)
> (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412
> 414 449 -hsync +vsync (31.5 kHz)
> (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688
> 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
> (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768
> 769 772 800 +hsync +vsync (60.0 kHz)
> (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768
> 771 777 806 -hsync -vsync (56.5 kHz)
> (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768
> 771 777 806 -hsync -vsync (48.4 kHz)
> (II) intel(0): Modeline "1024x768"x0.0 44.90 1024 1032 1208 1264 768
> 768 772 817 interlace +hsync +vsync (35.5 kHz)
> (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625
> 628 667 -hsync -vsync (49.7 kHz)
> (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601
> 604 625 +hsync +vsync (46.9 kHz)
> (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637
> 643 666 +hsync +vsync (48.1 kHz)
> (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864
> 865 868 900 +hsync +vsync (67.5 kHz)
> (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481
> 484 509 -hsync -vsync (43.3 kHz)
> (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601
> 604 631 +hsync +vsync (53.7 kHz)
> (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768
> 769 772 808 +hsync +vsync (68.7 kHz)
> (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960
> 961 964 1000 +hsync +vsync (60.0 kHz)
> (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688
> 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
> (II) intel(0): Modeline "1600x1200"x0.0 175.50 1600 1664 1856 2160
> 1200 1201 1204 1250 +hsync +vsync (81.2 kHz)
> (II) intel(0): EDID vendor "NEC", prod id 17450
>
> (II) intel(0): direct rendering: XF86DRI Enabled
> (--) RandR disabled
>
> (II) AIGLX: Screen 0 is not DRI2 capable
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 10, (OK)
> drmOpenByBusid: Searching for BusID pci:0000:00:02.0
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 10, (OK)
> drmOpenByBusid: drmOpenMinor returns 10
> drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
> (II) AIGLX: enabled GLX_SGI_make_current_read
> (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
> (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
> (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
> (II) AIGLX: Loaded and initialized /usr/local/lib/dri/i915_dri.so
> (II) GLX: Initialized DRI GL provider for screen 0
> (II) intel(0): Setting screen physical size to 306 x 230
>
>
>
> vgapci0 at pci0:0:2:1: class=0x030000 card=0x25821043 chip=0x25828086
> rev=0x04 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82915G/GV/GL, 82910GL Integrated Graphics Device'
> class = display
> subclass = VGA
> vgapci0: child drm0 requested pci_enable_busmaster
> info: [drm] AGP at 0xd0000000 256MB
> info: [drm] Initialized i915 1.6.0 20080730
> vgapci1: <VGA-compatible display> mem 0xcfe00000-0xcfe7ffff at device
> 2.1 on pci0
>
--
Robert Noland <rnoland at FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090406/ac15f047/attachment.pgp
More information about the freebsd-x11
mailing list