Upgrading to Xorg 7.2.0

Fri May 25 10:19:15 UTC 2007

On Thursday 24 of May 2007, Christopher Prance wrote:
> > -----Original Message-----
> > From: Dejan Lesjak [mailto:dejan.lesjak at ijs.si]
> > Sent: Thursday, May 24, 2007 8:29 PM
> > To: freebsd-x11 at freebsd.org
> > Cc: Christopher Prance; 'Florent Thoumie'
> > Subject: Re: Upgrading to Xorg 7.2.0
> >
> > On Thursday 24 May 2007 14:25:08 Christopher Prance wrote:
> > > > -----Original Message-----
> > > > From: Florent Thoumie [mailto:flz at FreeBSD.org]
> > > > Sent: Thursday, May 24, 2007 2:21 PM
> > > > To: Christopher Prance
> > > > Cc: 'Tom Evans'; freebsd-x11 at FreeBSD.org
> > > > Subject: Re: Upgrading to Xorg 7.2.0
> > > >
> > > > Christopher Prance wrote:
> > > > >> -----Original Message-----
> > > > >> From: Tom Evans [mailto:tevans.uk at googlemail.com]
> > > > >> Sent: Thursday, May 24, 2007 1:07 PM
> > > > >> To: Christopher Prance
> > > > >> Cc: freebsd-x11 at FreeBSD.org
> > > > >> Subject: Re: Upgrading to Xorg 7.2.0
> > > > >>
> > > > >> On Thu, 2007-05-24 at 11:49 +0200, Christopher Prance wrote:
> > > > >>> Hello all,
> > > > >>>
> > > > >>> I've been having some problems while trying to upgrade to Xorg
> > > > >>> 7.2.0, it seems that when I'm doing a pkgdb -F and I run into
> >
> > stale
> >
> > > > >>> dependency for anything -> xdriinfo, it fails with this as it
> > > >
> > > > builds:
> > > > >>> ===>   xdriinfo-1.0.1_1 depends on file:
> > > > >>> /usr/local/libdata/pkgconfig/glproto.pc - found
> > > > >>> ===>   xdriinfo-1.0.1_1 depends on file:
> > > > >>
> > > > >> /usr/local/libdata/pkgconfig/x11.pc
> > > > >>
> > > > >>> - found
> > > > >>> ===>   xdriinfo-1.0.1_1 depends on executable in : pkg-config -
> > > >
> > > > found
> > > >
> > > > >>> ===>   xdriinfo-1.0.1_1 depends on shared library: glut.4 -
> >
> > found
> >
> > > > >>> ===>  Configuring for xdriinfo-1.0.1_1
> > > > >>> configure: WARNING: you should use --build, --host, --target
> > > > >>> checking for a BSD-compatible install... /usr/bin/install -c -o
> > > >
> > > > root
> > > >
> > > > >>> -g wheel checking whether build environment is sane... yes
> >
> > checking
> >
> > > > >>> for
> > > > >>
> > > > >> gawk...
> > > > >>
> > > > >>> gawk checking whether make sets $(MAKE)... yes checking whether
> >
> > to
> >
> > > > >>> enable maintainer-specific portions of Makefiles... no checking
> >
> > for
> >
> > > > >>> i386-portbld-freebsd6.2-gcc... cc checking for C compiler
> >
> > default
> >
> > > > >>> output file name... a.out checking whether the C compiler
> >
> > works...
> >
> > > > >> yes
> > > > >>
> > > > >>> checking whether we are cross compiling... no checking for
> >
> > suffix
> >
> > > > of
> > > >
> > > > >>> executables...
> > > > >>> checking for suffix of object files... o checking whether we
> >
> > are
> >
> > > > >> using
> > > > >>
> > > > >>> the GNU C compiler... yes checking whether cc accepts -g... yes
> > > > >>> checking for cc option to accept ANSI C... none needed checking
> >
> > for
> >
> > > > >>> style of include used by make... GNU checking dependency style
> >
> > of
> >
> > > > >>> cc... gcc3 checking for a BSD-compatible install...
> > > >
> > > > /usr/bin/install
> > > >
> > > > >>> -c -o root -g wheel checking return type of signal handlers...
> >
> > void
> >
> > > > >>> checking for i386-portbld-freebsd6.2-pkg-config... no checking
> >
> > for
> >
> > > > >>> pkg-config... /usr/local/bin/pkg-config checking pkg-config is
> >
> > at
> >
> > > > >>> least version 0.9.0... yes checking for XDRIINFO... yes
> >
> > checking
> >
> > > > for
> > > >
> > > > >>> library containing glXGetProcAddressARB... no
> > > > >>> configure: error: cannot find GL library - make sure Mesa or
> >
> > other
> >
> > > > >>> OpenGL package is installed See `config.log' for more details.
> > > > >>> ===>  Script "configure" failed unexpectedly.
> > > > >>> Please report the problem to x11 at FreeBSD.org [maintainer] and
> > > >
> > > > attach
> > > >
> > > > >>> the "/usr/ports/x11/xdriinfo/work/xdriinfo-1.0.1/config.log"
> > > > >>
> > > > >> including
> > > > >>
> > > > >>> the output of the failure of your make command. Also, it might
> >
> > be a
> >
> > > > >>> good idea to provide an overview of all packages installed on
> >
> > your
> >
> > > > >>> system (e.g. an `ls /var/db/pkg`).
> > > > >>> *** Error code 1
> > > > >>>
> > > > >>> Stop in /usr/ports/x11/xdriinfo.
> > > > >>>
> > > > >>> I have actually just deleted the dependency which I hope did
> >
> > not
> >
> > > > >>> mess anything up.  I'm still learning as I go so any help would
> >
> > be
> >
> > > > >> appreciated.
> > > > >>
> > > > >>> All of my LibGL, libGLU, and libglut, are installed and still
> >
> > no
> >
> > > > >> luck.
> > > > >>
> > > > >>> Thanks,
> > > > >>> Christopher Prance
> > > > >>
> > > > >> Can you attach the
> > > > >> "/usr/ports/x11/xdriinfo/work/xdriinfo-1.0.1/config.log"
> >
> > including
> >
> > > > >> the output of the failure of your make command. Also, it might
> >
> > be a
> >
> > > > >> good idea to provide an overview of all packages installed on
> >
> > your
> >
> > > > >> system (e.g. an `ls /var/db/pkg`).
> > > > >
> > > > > Here is the list of pkgs and the config.log file....
> > > > >
> > > > > Thanks in advance!
> > > >
> > > > Can you give me the output of ldd /usr/local/lib/libGL.so.1?
> > > >
> > > > --
> > > > Florent Thoumie
> > > > flz at FreeBSD.org
> > > > FreeBSD Committer
> > >
> > > /usr/local/lib/libGL.so.1:
> > >         libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x281cd000)
> > >         libXext.so.6 => /usr/X11R6/lib/libXext.so.6 (0x2828e000)
> > >         libXxf86vm.so.1 => /usr/X11R6/lib/libXxf86vm.so.1
> >
> > (0x2829b000)
> >
> > >         libXdamage.so.1 => /usr/X11R6/lib/libXdamage.so.1
> >
> > (0x282a0000)
> >
> > >         libXfixes.so.3 => /usr/X11R6/lib/libXfixes.so.3 (0x282a3000)
> > >         libm.so.4 => /lib/libm.so.4 (0x282a8000)
> > >         libpthread.so.2 => /lib/libpthread.so.2 (0x282be000)
> > >         libdrm.so.2 => /usr/local/lib/libdrm.so.2 (0x282e3000)
> >
> > I'm sorry if you mentioned that before, but you don't
> > have /usr/X11R6 -> /usr/local symlink yet? Assuming you don't
> > and /usr/X11R6/lib/libXdamage.so.1 is still there from xorg-libraries-
> > 6.9 [1]
> > then you should remove it (or move it somewhere out of the way) and
> > rebuild
> > libGL so it relinks with the one in /usr/local (that should be there
> > from
> > libXdamage port). Unfortunately they don't seem compatible... Then
> > (assuming
> > it goes well) try xdriinfo again.
> >
> > Dejan
> >
> > [1] it should get removed with xorg-libraries-6.9 port which you
> > apparently
> > don't have installed any more from the output posted before. It's
> > strange
> > that it got left somehow. Output
> > of "pkg_which /usr/X11R6/lib/libXdamage.so.1" (and for the other
> > libraries in
> > above ldd output might be useful if nonempty. Note that you also have a
> > couple of xorg-server ports installed, which also isn't usual
> > situation.
> > Does "pkgdb -F" not mention those?
>
> Ok, I made a link, well first I moved the X11R6 directory to
> /usr/X11R6.old, then created the link.  They port built just fine now. Go
> figure.... but when I get all of this done and I start to do a portupgrade
> -a will everything work out ok? Or have I royally screwed every thing up? 
> Again your help and everyone elses is MUCH appreciated.

Erm, no. Undo that for now - ie. remove /usr/X11R6 -> /usr/local link and put 
X11R6.old back. The link should come in place when portupgrade is done with 
mergebase.sh script as said in UPDATING.
Now, check and tell us the output 
of "pkg_which /usr/X11R6/lib/libXdamage.so.1".

Dejan