www/125559: Mainboard specific option for eLOM and Sun Fire X2100 M2

Sun Jul 13 11:50:02 UTC 2008

>Number:         125559
>Category:       www
>Synopsis:       Mainboard specific option for eLOM and Sun Fire X2100 M2
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    freebsd-www
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          doc-bug
>Submitter-Id:   current-users
>Arrival-Date:   Sun Jul 13 11:50:01 UTC 2008
>Closed-Date:
>Last-Modified:
>Originator:     Markus Fröhlich
>Release:        7.0-RELEASE
>Organization:
>Environment:
FreeBSD hostname 7.0-RELEASE FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008     root at driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  amd64
>Description:
FreeBSD/amd64 Project -- motherboards Page
Sun Fire X2100 M2 Server

To get a connection to the Remote Management (eLOM) interface after the bge(4) driver has been loaded, "hw.bge.allow_asf=1" has to be added in loader.conf or at the bootpromt (for a new installation via eLOM).

Maybe this option is also necessary for the X2200 M2 because these 2 models difffer only in the number of CPUs.

Without this setting the last lines that can be seen in the remote console are:

pcib5: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib6

and then ther's no connection to the eLOM service Processor

dmesg on 7.0-RELEASE:
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008
    root at driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Dual-Core AMD Opteron(tm) Processor 1218 (2613.41-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40f33  Stepping = 3
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
  Cores per package: 2
usable memory = 2133385216 (2034 MB)
avail memory  = 2058674176 (1963 MB)
ACPI APIC Table: <A M I  OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 10:34:18)
acpi0: <A M I OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x2008-0x200b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
device_attach: powernow0 attach returned 6
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
device_attach: powernow1 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfcffb000-0xfcffbfff irq 21 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 8 ports with 8 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfcffac00-0xfcffacff irq 22 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 8 ports with 8 removable, self powered
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 4.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 controller> port 0xd480-0xd487,0xd400-0xd403,0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc0f mem 0xfcff9000-0xfcff9fff irq 23 at device 5.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xec00-0xec7f mem 0xfd000000-0xfd7fffff,0xfdee0000-0xfdefffff irq 16 at device 5.0 on pci1
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xc880-0xc887 mem 0xfcff8000-0xfcff8fff,0xfcffa800-0xfcffa8ff,0xfcffa400-0xfcffa40f irq 20 at device 8.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 2 on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nfe0: Ethernet address: 00:1e:68:04:87:dd
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xc800-0xc807 mem 0xfcff7000-0xfcff7fff,0xfcffa000-0xfcffa0ff,0xfcff6c00-0xfcff6c0f irq 21 at device 9.0 on pci0
miibus1: <MII bus> on nfe1
e1000phy1: <Marvell 88E1149 Gigabit PHY> PHY 3 on miibus1
e1000phy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nfe1: Ethernet address: 00:1e:68:04:87:de
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib6
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x9003> mem 0xfdff0000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 17 at device 4.0 on pci6
miibus2: <MII bus> on bge0
brgphy0: <BCM5714 10/100/1000baseTX PHY> PHY 1 on miibus2
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:1e:68:04:87:db
bge0: [ITHREAD]
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x9003> mem 0xfdfc0000-0xfdfcffff,0xfdfb0000-0xfdfbffff irq 18 at device 4.1 on pci6
miibus3: <MII bus> on bge1
brgphy1: <BCM5714 10/100/1000baseTX PHY> PHY 1 on miibus3
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1: Ethernet address: 00:1e:68:04:87:dc
bge1: [ITHREAD]
pcib7: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci8: <ACPI PCI bus> on pcib8
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xca7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: <Virtual USB MULTIMEDIA KEYBOARD, class 0/0, rev 1.10/0.01, addr 2> on uhub0
kbd2 at ukbd0
ums0: <Virtual USB MULTIMEDIA KEYBOARD, class 0/0, rev 1.10/0.01, addr 2> on uhub0
ums0: 3 buttons and Z dir.
ukbd1: <vendor 0x13ba Generic USB K/B, class 0/0, rev 1.10/0.01, addr 3> on uhub0
kbd3 at ukbd1
ums1: <vendor 0x13ba Generic USB K/B, class 0/0, rev 1.10/0.01, addr 3> on uhub0
ums1: 3 buttons and Z dir.
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
Timecounters tick every 1.000 msec
hptrr: no controller detected.
ZFS filesystem version 6
ZFS storage pool version 6
acd0: DVDROM <DV-28E-V/1.AC> at ata0-master UDMA33
ad4: 476940MB <SAMSUNG HD501LJ CR100-12> at ata2-master SATA300
ad6: 476940MB <SAMSUNG HD501LJ CR100-12> at ata3-master SATA300
SMP: AP CPU #1 Launched!
Trying to mount root from zfs:tank/root

>How-To-Repeat:
booting freebsd and watching via eLOM Console
>Fix:
Add "hw.bge.allow_asf=1" to /boot/loader.conf

>Release-Note:
>Audit-Trail:
>Unformatted: