[Bug 241253] if_rtwn_usb module leaves device loaded on system shutdown

[bugzilla-noreply at freebsd.org]

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=241253

Cristian Ciobanu <cioby.service at gmail.com> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |cioby.service at gmail.com

--- Comment #4 from Cristian Ciobanu <cioby.service at gmail.com> ---
I have the same error as the one shown in comment #3

rtwn0: rtwn_tx_beacon_check: cannot push beacon into chip, error 60!            
rtwn0: unable to push beacon into the chip, error 60                            
rtwn0: rtwn_newstate: could not move to RUN state

I'm using an D-link DWA 131 Rev. E USB wifi adapter in hostap mode. The chipset
is Realtek RTL8192EU.

I have tested this on 3 different systems, FreeBSD 12, FreeBSD 13 and OPNsense
20.7.3.

On the CLI the WLAN interface is shown as up and running but the status is no
carrier. All drivers and firmware were loaded successfully. On the rtwn man
page I see the device is on the supported list.
https://www.freebsd.org/cgi/man.cgi?query=rtwn_usb&sektion=4&apropos=0&manpath=FreeBSD+12.1-RELEASE+and+Ports

-- 
You are receiving this mail because:
You are the assignee for the bug.