Atheros AR5B22 WLAN+Bluetooth support on FreeBSD

[Adrian Chadd]

hi,

On Thu, 18 Apr 2019 at 10:02, Matthias Apitz <guru at unixarea.de> wrote:

> El día Thursday, April 18, 2019 a las 08:05:53AM -0700, Adrian Chadd
> escribió:
>
> > that means it SHOULD be ready for normal HCI operation. bcdDevice=1 is
> what
> > the driver uses to determine if it's only in the boot ROM. Yours either
> got
> > it in a previous boot, or it has a ROM with the full firmware.
>
> btw: I switched from ChromeOS in developer mode to boot FreeBSD from USB by
> 'reboot' and not by power-cycle. Maybe that's the reason why the
> firmware is still loaded.
>
> > Try starting bluetooth now and do an inquiry.
>
> # grep ubt0 /var/log/messages
>
> Apr 18 14:29:46 c720-r342378-usb kernel: ubt0 on uhub1
>
>
> Apr 18 14:29:46 c720-r342378-usb kernel: ubt0: <vendor 0x0489 product
> 0xe056, class 224/1, rev 1.10/0.02, addr 3> on usbus0
>
> # service bluetooth start ubt0
>
> /etc/rc.d/bluetooth: ERROR: Unable to setup Bluetooth stack for device
> ubt0
>
> # /etc/rc.d/hcsecd onestart
>
> Starting hcsecd.
>
>
> # service bluetooth start ubt0
>
> ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command
> OGF=0x3, OCF=0x3. Timeout
>
> /etc/rc.d/bluetooth: ERROR: Unable to setup Bluetooth stack for device ubt0
>
> anything else to test?
>

not for now. I'll try testing it on an older device where it's connected
via USB 2.0 and see what happens.

Thanks,


-a


>         matthias
> --
> Matthias Apitz, ✉ guru at unixarea.de, http://www.unixarea.de/
> +49-176-38902045
> Public GnuPG key: http://www.unixarea.de/key.pub
> 70 years of NATO - 70 years of wars (Jugoslavia, Afghanistan, Syria, ...)
> and 70 years
> of war preparation against Russia.  -- PEACE instead of NATO !
>