hostapd + freeradius can't connect
Adrian Chadd
adrian at freebsd.org
Sat May 16 06:03:36 UTC 2015
Hi,
Has this ever worked?
Someone had issues as well, and it turned out to be large UDP frames
(from freeradius) being dropped by an intermediary (in this instance,
openvpn.)
I wonder if you're seeing the same issue.
Unfortunately I don't have an 802.3x + wifi/EAP setup here to test
with. I'll try to set something up soon, but no promises.
What's the wpa_supplicant.conf look like on the client?
Thanks!
-adrian
On 13 May 2015 at 13:49, Marcin Michta <marcin.michta at gmail.com> wrote:
> When I set on Cisco AP my freeradius server all works fine.
> All devices can connect to network. So I guess that is not freeradius's fault
> My radius configs:
>
> radiusd.conf:
> prefix = /usr/local
> exec_prefix = ${prefix}
> sysconfdir = ${prefix}/etc
> localstatedir = /var
> sbindir = ${exec_prefix}/sbin
> logdir = /var/log
> raddbdir = ${sysconfdir}/raddb
> radacctdir = ${logdir}/radacct
> name = radiusd
> confdir = ${raddbdir}
> modconfdir = ${confdir}/mods-config
> certdir = ${confdir}/certs
> cadir = ${confdir}/certs
> run_dir = ${localstatedir}/run/${name}
> db_dir = ${raddbdir}
> libdir = /usr/local/lib/freeradius-3.0.8
> pidfile = ${run_dir}/${name}.pid
> correct_escapes = true
> max_request_time = 30
> cleanup_delay = 5
> max_requests = 1024
> hostname_lookups = no
> log {
> destination = files
> colourise = yes
> file = ${logdir}/radiusd
> syslog_facility = daemon
> stripped_names = no
> auth = yes
> msg_denied = "You are already logged in - access denied"
> }
> checkrad = ${sbindir}/checkrad
> security {
> user = freeradius
> group = freeradius
> allow_core_dumps = no
> max_attributes = 200
> reject_delay = 1
> status_server = yes
> allow_vulnerable_openssl = no
> }
> proxy_requests = yes
> $INCLUDE proxy.conf
> $INCLUDE clients.conf
> thread pool {
> start_servers = 5
> max_servers = 32
> min_spare_servers = 3
> max_spare_servers = 10
> max_requests_per_server = 0
> auto_limit_acct = no
> }
> modules {
> $INCLUDE mods-enabled/
> }
> instantiate {
> }
> policy {
> $INCLUDE policy.d/
> }
> $INCLUDE sites-enabled/
> ########################
> sites-enabled/default:
> server default {
> listen {
> type = auth
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> ipaddr = *
> port = 0
> type = acct
> limit {
> }
> }
> listen {
> type = auth
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> ipv6addr = ::
> port = 0
> type = acct
> limit {
> }
> }
> authorize {
> filter_username
> preprocess
> digest
> suffix
> eap {
> ok = return
> }
> expiration
> logintime
> }
> authenticate {
> digest
> eap
> }
> preacct {
> preprocess
> acct_unique
> suffix
> files
> }
> accounting {
> detail
> unix
> exec
> attr_filter.accounting_response
> }
> session {
> }
> post-auth {
> update {
> &reply: += &session-state:
> }
> exec
> remove_reply_message_if_eap
> Post-Auth-Type REJECT {
> attr_filter.access_reject
> eap
> remove_reply_message_if_eap
> }
> }
> pre-proxy {
> }
> post-proxy {
> eap
> }
> }
> ########################
> sites-enabled/inner-tunnel:
> server inner-tunnel {
> listen {
> ipaddr = 127.0.0.1
> port = 18120
> type = auth
> }
> authorize {
> chap
> mschap
> suffix
> update control {
> &Proxy-To-Realm := LOCAL
> }
> eap {
> ok = return
> }
> files
> ldap
> expiration
> logintime
> pap
> }
> authenticate {
> Auth-Type PAP {
> ldap
> }
> chap
> Auth-Type MS-CHAP {
> mschap
> }
> eap
> }
> session {
> radutmp
> }
> post-auth {
> reply_log
> ldap
> Post-Auth-Type REJECT {
> attr_filter.access_reject
> update outer.session-state {
> &Module-Failure-Message := &request:Module-Failure-Message
> }
> }
> }
> pre-proxy {
> }
> post-proxy {
> eap
> }
> ########################
> mods-enabled/eap:
> eap {
> default_eap_type = peap
> timer_expire = 60
> ignore_unknown_eap_types = no
> cisco_accounting_username_bug = no
> max_sessions = ${max_requests}
> gtc {
> auth_type = PAP
> }
> tls-config tls-common {
> private_key_password = whatever
> private_key_file = ${certdir}/server.pem
> certificate_file = ${certdir}/server.pem
> ca_file = ${cadir}/ca.pem
> dh_file = ${certdir}/dh
> ca_path = ${cadir}
> cipher_list = "DEFAULT"
> ecdh_curve = "prime256v1"
> cache {
> enable = yes
> max_entries = 255
> }
> verify {
> }
> ocsp {
> enable = no
> override_cert_url = yes
> url = "http://127.0.0.1/ocsp/"
> }
> }
> tls {
> tls = tls-common
> }
> ttls {
> tls = tls-common
> default_eap_type = mschapv2
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> virtual_server = "inner-tunnel"
> }
> peap {
> tls = tls-common
> default_eap_type = mschapv2
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> virtual_server = "inner-tunnel"
> }
> mschapv2 {
> }
> }
>
>
>
>> Hi!
>>
>> I haven't tested radius+wpa before; what's your radius config look like?
>>
>> (It'd be good to document how to do this in the wiki/handbook.)
>>
>>
>>
>> -a
>
>
> On 13 May 2015 at 05:11, Marcin Michta <marcin.michta at gmail.com> wrote:
>> Hi all,
>> So I'm trying configure hostapd to work (peap + mschapv2). I tried
>> connect by wpa_suplicant on FreeBSD, and Ubuntu with gui, but without success.
>> Freeradius allow to connect, but connections are failed - every time get:
>>
>> hostapd_wpa_auth_disconnect: WPA authenticator requests disconnect:
>> STA
>> 00:24:d7:6f:eb:c4 reason 2
>>
>>
>>
>> Where is mistake/bug? Or what is wrong?
>> log:
>>
>> 1431101834.596845: Configuration file: hostapd.conf
>>
>> 1431101834.596913: Line 10: DEPRECATED: 'debug' configuration variable
>> is not used anymore
>>
>> 1431101834.626788: ctrl_interface_group=0
>>
>> 1431101834.627088: BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits)
>>
>> 1431101834.627098: Completing interface initialization
>>
>> 1431101834.627101: Flushing old station entries
>>
>> 1431101834.627109: Deauthenticate all stations
>>
>> 1431101834.627113: bsd_set_privacy: enabled=0
>>
>> 1431101834.627117: bsd_set_key: alg=0 addr=0x0 key_idx=0 set_tx=1
>> seq_len=0
>> key_len=0
>>
>> 1431101834.627120: bsd_del_key: key_idx=0
>>
>> 1431101834.627124: bsd_set_key: alg=0 addr=0x0 key_idx=1 set_tx=0
>> seq_len=0
>> key_len=0
>>
>> 1431101834.627127: bsd_del_key: key_idx=1
>>
>> 1431101834.627130: bsd_set_key: alg=0 addr=0x0 key_idx=2 set_tx=0
>> seq_len=0
>> key_len=0
>>
>> 1431101834.627133: bsd_del_key: key_idx=2
>>
>> 1431101834.627136: bsd_set_key: alg=0 addr=0x0 key_idx=3 set_tx=0
>> seq_len=0
>> key_len=0
>>
>> 1431101834.627139: bsd_del_key: key_idx=3
>>
>> 1431101834.627143: Using interface wlan0 with hwaddr 00:0e:2e:c4:2f:e7
>> and ssid 'RADIUS'
>>
>> 1431101834.627155: wlan0: RADIUS Authentication server
>> 10.146.20.137:1812
>>
>> 1431101834.627257: RADIUS local address: 10.146.103.7:14137
>>
>> 1431101834.627270: wlan0: RADIUS Accounting server 10.146.20.137:1813
>>
>> 1431101834.627288: RADIUS local address: 10.146.103.7:14773
>>
>> 1431101834.627294: bsd_set_ieee8021x: enabled=1
>>
>> 1431101834.627296: bsd_configure_wpa: enable WPA= 0x1
>>
>> 1431101834.627514: WPA: group state machine entering state GTK_INIT
>> (VLAN-ID
>> 0)
>>
>> 1431101834.627527: GMK - hexdump(len=32): [REMOVED]
>>
>> 1431101834.627530: GTK - hexdump(len=32): [REMOVED]
>>
>> 1431101834.627532: WPA: group state machine entering state SETKEYSDONE
>> (VLAN-ID 0)
>>
>> 1431101834.627535: bsd_set_key: alg=2 addr=0x0 key_idx=1 set_tx=1
>> seq_len=0
>> key_len=32
>>
>> 1431101834.632173: ioctl[SIOCS80211, op=19, val=0, arg_len=64]: Device
>> not configured
>>
>> 1431101834.632194: bsd_set_privacy: enabled=1
>>
>> 1431101834.632200: bsd_set_opt_ie: set WPA+RSN ie (len 24)
>>
>> 1431101834.632229: wlan0: RADIUS Sending RADIUS message to accounting
>> server
>>
>> 1431101834.632259: wlan0: RADIUS Next RADIUS client retransmit in 3
>> seconds
>>
>>
>>
>> 1431101834.702842: wlan0: Setup of interface done.
>>
>> 1431101834.702886: Discard routing message to if#0 (not for us 8)
>>
>>
>>
>> 1431101834.702897: wlan0: RADIUS Received 20 bytes from RADIUS server
>>
>> 1431101834.702914: wlan0: RADIUS Received RADIUS message
>>
>> 1431101834.702925: wlan0: STA 00:00:00:00:00:00 RADIUS: Received
>> RADIUS packet matched with a pending request, round trip time 0.07 sec
>>
>> 1431101867.876189: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.11:
>> associated
>>
>> 1431101867.876215: STA included WPA IE in (Re)AssocReq
>>
>> 1431101867.876220: New STA
>>
>> 1431101867.876230: wlan0: STA 00:24:d7:6f:eb:c4 WPA: event 1
>> notification
>>
>> 1431101867.876243: bsd_set_key: alg=0 addr=0x8014908d0 key_idx=0
>> set_tx=1
>> seq_len=0 key_len=0
>>
>> 1431101867.876248: bsd_del_key: addr=00:24:d7:6f:eb:c4
>>
>> 1431101867.876258: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X: start
>> authentication
>>
>> 1431101867.876270: EAP: Server state machine created
>>
>> 1431101867.876275: IEEE 802.1X: 00:24:d7:6f:eb:c4 BE_AUTH entering
>> state IDLE
>>
>> 1431101867.876279: IEEE 802.1X: 00:24:d7:6f:eb:c4 CTRL_DIR entering
>> state FORCE_BOTH
>>
>> 1431101867.876291: wlan0: STA 00:24:d7:6f:eb:c4 WPA: start
>> authentication
>>
>> 1431101867.876302: WPA: 00:24:d7:6f:eb:c4 WPA_PTK entering state
>> INITIALIZE
>>
>> 1431101867.876307: bsd_set_key: alg=0 addr=0x8014908d0 key_idx=0
>> set_tx=1
>> seq_len=0 key_len=0
>>
>> 1431101867.876310: bsd_del_key: addr=00:24:d7:6f:eb:c4
>>
>> 1431101867.876316: WPA: 00:24:d7:6f:eb:c4 WPA_PTK_GROUP entering state
>> IDLE
>>
>> 1431101867.876319: WPA: 00:24:d7:6f:eb:c4 WPA_PTK entering state
>> AUTHENTICATION
>>
>> 1431101867.876322: WPA: 00:24:d7:6f:eb:c4 WPA_PTK entering state
>> AUTHENTICATION2
>>
>> 1431101867.876329: IEEE 802.1X: 00:24:d7:6f:eb:c4 AUTH_PAE entering
>> state DISCONNECTED
>>
>> 1431101867.876337: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X:
>> unauthorizing port
>>
>> 1431101867.876348: IEEE 802.1X: 00:24:d7:6f:eb:c4 AUTH_PAE entering
>> state RESTART
>>
>> 1431101867.876354: EAP: EAP entering state INITIALIZE
>>
>> 1431101867.876358: CTRL-EVENT-EAP-STARTED 00:24:d7:6f:eb:c4
>>
>> 1431101867.876360: EAP: EAP entering state SELECT_ACTION
>>
>> 1431101867.876362: EAP: getDecision: no identity known yet -> CONTINUE
>>
>> 1431101867.876364: EAP: EAP entering state PROPOSE_METHOD
>>
>> 1431101867.876366: EAP: getNextMethod: vendor 0 type 1
>>
>> 1431101867.876369: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1
>>
>> 1431101867.876371: EAP: EAP entering state METHOD_REQUEST
>>
>> 1431101867.876374: EAP: building EAP-Request: Identifier 77
>>
>> 1431101867.876377: EAP: EAP entering state SEND_REQUEST
>>
>> 1431101867.876379: EAP: EAP entering state IDLE
>>
>> 1431101867.876381: EAP: retransmit timeout 3 seconds (from dynamic
>> back off;
>> retransCount=0)
>>
>> 1431101867.876383: IEEE 802.1X: 00:24:d7:6f:eb:c4 AUTH_PAE entering
>> state CONNECTING
>>
>> 1431101867.876386: IEEE 802.1X: 00:24:d7:6f:eb:c4 AUTH_PAE entering
>> state AUTHENTICATING
>>
>> 1431101867.876389: IEEE 802.1X: 00:24:d7:6f:eb:c4 BE_AUTH entering
>> state REQUEST
>>
>> 1431101867.876394: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X: Sending
>> EAP Packet (identifier 77)
>>
>> 1431101867.880287: IEEE 802.1X: 14 bytes from 00:24:d7:6f:eb:c4
>>
>> 1431101867.880294: IEEE 802.1X: version=1 type=0 length=10
>>
>> 1431101867.880298: EAP: code=2 identifier=77 length=10
>>
>> 1431101867.880300: (response)
>>
>> 1431101867.880305: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X: received
>> EAP packet (code=2 id=77 len=10) from STA: EAP Response-Identity (1)
>>
>> 1431101867.880322: IEEE 802.1X: 00:24:d7:6f:eb:c4 BE_AUTH entering
>> state RESPONSE
>>
>> 1431101867.880326: EAP: EAP entering state RECEIVED
>>
>> 1431101867.880328: EAP: parseEapResp: rxResp=1 respId=77 respMethod=1
>> respVendor=0 respVendorMethod=0
>>
>> 1431101867.880331: EAP: EAP entering state INTEGRITY_CHECK
>>
>> 1431101867.880333: EAP: EAP entering state METHOD_RESPONSE
>>
>> 1431101867.880335: EAP-Identity: Peer identity - hexdump_ascii(len=5):
>>
>> 7a 65 6e 6f 6e zenon
>>
>> 1431101867.880341: EAP: EAP entering state SELECT_ACTION
>>
>> 1431101867.880343: EAP: getDecision: -> PASSTHROUGH
>>
>> 1431101867.880345: EAP: EAP entering state INITIALIZE_PASSTHROUGH
>>
>> 1431101867.880347: EAP: EAP entering state AAA_REQUEST
>>
>> 1431101867.880348: EAP: EAP entering state AAA_IDLE
>>
>> 1431101867.880353: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X: STA
>> identity 'zenon'
>>
>> 1431101867.880363: Encapsulating EAP message into a RADIUS packet
>>
>> 1431101867.880379: wlan0: RADIUS Sending RADIUS message to
>> authentication server
>>
>> 1431101867.880399: wlan0: RADIUS Next RADIUS client retransmit in 3
>> seconds
>>
>>
>>
>> 1431101867.882189: wlan0: RADIUS Received 64 bytes from RADIUS server
>>
>> 1431101867.882237: wlan0: RADIUS Received RADIUS message
>>
>> 1431101867.882254: wlan0: STA 00:24:d7:6f:eb:c4 RADIUS: Received
>> RADIUS packet matched with a pending request, round trip time 0.00 sec
>>
>> 1431101867.882272: RADIUS packet matching with station
>> 00:24:d7:6f:eb:c4
>>
>> 1431101867.882284: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X:
>> decapsulated EAP packet (code=1 id=78 len=6) from RADIUS server:
>> EAP-Request-PEAP (25)
>>
>> 1431101867.882305: EAP: EAP entering state AAA_RESPONSE
>>
>> 1431101867.882308: EAP: getId: id=78
>>
>> 1431101867.882311: EAP: EAP entering state SEND_REQUEST2
>>
>> 1431101867.882313: EAP: EAP entering state IDLE2
>>
>> 1431101867.882314: EAP: retransmit timeout 3 seconds (from dynamic
>> back off;
>> retransCount=0)
>>
>> 1431101867.882317: IEEE 802.1X: 00:24:d7:6f:eb:c4 BE_AUTH entering
>> state REQUEST
>>
>> 1431101867.882322: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X: Sending
>> EAP Packet (identifier 78)
>>
>> 1431101867.883893: IEEE 802.1X: 122 bytes from 00:24:d7:6f:eb:c4
>>
>> 1431101867.883907: IEEE 802.1X: version=1 type=0 length=118
>>
>> 1431101867.883923: EAP: code=2 identifier=78 length=118
>>
>> 1431101867.883925: (response)
>>
>> 1431101867.883930: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X: received
>> EAP packet (code=2 id=78 len=118) from STA: EAP Response-PEAP (25)
>>
>> 1431101867.883947: IEEE 802.1X: 00:24:d7:6f:eb:c4 BE_AUTH entering
>> state RESPONSE
>>
>> 1431101867.883952: EAP: EAP entering state RECEIVED2
>>
>> 1431101867.883954: EAP: parseEapResp: rxResp=1 respId=78 respMethod=25
>> respVendor=0 respVendorMethod=0
>>
>> 1431101867.883956: EAP: EAP entering state AAA_REQUEST
>>
>> 1431101867.883959: EAP: EAP entering state AAA_IDLE
>>
>> 1431101867.883961: Encapsulating EAP message into a RADIUS packet
>>
>> 1431101867.883969: Copied RADIUS State Attribute
>>
>> 1431101867.883975: wlan0: RADIUS Sending RADIUS message to
>> authentication server
>>
>> 1431101867.883995: wlan0: RADIUS Next RADIUS client retransmit in 3
>> seconds
>>
>>
>>
>> 1431101867.890371: wlan0: RADIUS Received 1068 bytes from RADIUS
>> server
>>
>> 1431101867.890413: wlan0: RADIUS Received RADIUS message
>>
>> 1431101867.890427: wlan0: STA 00:24:d7:6f:eb:c4 RADIUS: Received
>> RADIUS packet matched with a pending request, round trip time 0.00 sec
>>
>> 1431101867.890450: RADIUS packet matching with station
>> 00:24:d7:6f:eb:c4
>>
>> 1431101867.890461: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X:
>> decapsulated EAP packet (code=1 id=79 len=1004) from RADIUS server:
>> EAP-Request-PEAP (25)
>>
>> 1431101867.890483: EAP: EAP entering state AAA_RESPONSE
>>
>> 1431101867.890486: EAP: getId: id=79
>>
>> 1431101867.890489: EAP: EAP entering state SEND_REQUEST2
>>
>> 1431101867.890491: EAP: EAP entering state IDLE2
>>
>> 1431101867.890493: EAP: retransmit timeout 3 seconds (from dynamic
>> back off;
>> retransCount=0)
>>
>> 1431101867.890495: IEEE 802.1X: 00:24:d7:6f:eb:c4 BE_AUTH entering
>> state REQUEST
>>
>> 1431101867.890500: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X: Sending
>> EAP Packet (identifier 79)
>>
>> 1431101867.892393: IEEE 802.1X: 10 bytes from 00:24:d7:6f:eb:c4
>>
>> 1431101867.892408: IEEE 802.1X: version=1 type=0 length=6
>>
>> 1431101867.892423: EAP: code=2 identifier=79 length=6
>>
>> 1431101867.892426: (response)
>>
>> 1431101867.892430: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X: received
>> EAP packet (code=2 id=79 len=6) from STA: EAP Response-PEAP (25)
>>
>> 1431101867.892450: IEEE 802.1X: 00:24:d7:6f:eb:c4 BE_AUTH entering
>> state RESPONSE
>>
>> 1431101867.892454: EAP: EAP entering state RECEIVED2
>>
>> 1431101867.892456: EAP: parseEapResp: rxResp=1 respId=79 respMethod=25
>> respVendor=0 respVendorMethod=0
>>
>> 1431101867.892459: EAP: EAP entering state AAA_REQUEST
>>
>> 1431101867.892461: EAP: EAP entering state AAA_IDLE
>>
>> 1431101867.892463: Encapsulating EAP message into a RADIUS packet
>>
>> 1431101867.892471: Copied RADIUS State Attribute
>>
>> 1431101867.892477: wlan0: RADIUS Sending RADIUS message to
>> authentication server
>>
>> 1431101867.892496: wlan0: RADIUS Next RADIUS client retransmit in 3
>> seconds
>>
>>
>>
>> 1431101867.893138: wlan0: RADIUS Received 1064 bytes from RADIUS
>> server
>>
>> 1431101867.893185: wlan0: RADIUS Received RADIUS message
>>
>> 1431101867.893204: wlan0: STA 00:24:d7:6f:eb:c4 RADIUS: Received
>> RADIUS packet matched with a pending request, round trip time 0.00 sec
>>
>> 1431101867.893222: RADIUS packet matching with station
>> 00:24:d7:6f:eb:c4
>>
>> 1431101867.893229: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X:
>> decapsulated EAP packet (code=1 id=80 len=1000) from RADIUS server:
>> EAP-Request-PEAP (25)
>>
>> 1431101867.893245: EAP: EAP entering state AAA_RESPONSE
>>
>> 1431101867.893249: EAP: getId: id=80
>>
>> 1431101867.893251: EAP: EAP entering state SEND_REQUEST2
>>
>> 1431101867.893253: EAP: EAP entering state IDLE2
>>
>> 1431101867.893255: EAP: retransmit timeout 3 seconds (from dynamic
>> back off;
>> retransCount=0)
>>
>> 1431101867.893257: IEEE 802.1X: 00:24:d7:6f:eb:c4 BE_AUTH entering
>> state REQUEST
>>
>> 1431101867.893262: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X: Sending
>> EAP Packet (identifier 80)
>>
>> 1431101867.894019: IEEE 802.1X: 10 bytes from 00:24:d7:6f:eb:c4
>>
>> 1431101867.894043: IEEE 802.1X: version=1 type=0 length=6
>>
>> 1431101867.894047: EAP: code=2 identifier=80 length=6
>>
>> 1431101867.894049: (response)
>>
>> 1431101867.894054: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X: received
>> EAP packet (code=2 id=80 len=6) from STA: EAP Response-PEAP (25)
>>
>> 1431101867.894074: IEEE 802.1X: 00:24:d7:6f:eb:c4 BE_AUTH entering
>> state RESPONSE
>>
>> 1431101867.894078: EAP: EAP entering state RECEIVED2
>>
>> 1431101867.894080: EAP: parseEapResp: rxResp=1 respId=80 respMethod=25
>> respVendor=0 respVendorMethod=0
>>
>> 1431101867.894083: EAP: EAP entering state AAA_REQUEST
>>
>> 1431101867.894085: EAP: EAP entering state AAA_IDLE
>>
>> 1431101867.894087: Encapsulating EAP message into a RADIUS packet
>>
>> 1431101867.894095: Copied RADIUS State Attribute
>>
>> 1431101867.894101: wlan0: RADIUS Sending RADIUS message to
>> authentication server
>>
>> 1431101867.894121: wlan0: RADIUS Next RADIUS client retransmit in 3
>> seconds
>>
>>
>>
>> 1431101867.894735: wlan0: RADIUS Received 968 bytes from RADIUS server
>>
>> 1431101867.894777: wlan0: RADIUS Received RADIUS message
>>
>> 1431101867.894792: wlan0: STA 00:24:d7:6f:eb:c4 RADIUS: Received
>> RADIUS packet matched with a pending request, round trip time 0.00 sec
>>
>> 1431101867.894814: RADIUS packet matching with station
>> 00:24:d7:6f:eb:c4
>>
>> 1431101867.894828: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X:
>> decapsulated EAP packet (code=1 id=81 len=904) from RADIUS server:
>> EAP-Request-PEAP (25)
>>
>> 1431101867.894847: EAP: EAP entering state AAA_RESPONSE
>>
>> 1431101867.894851: EAP: getId: id=81
>>
>> 1431101867.894853: EAP: EAP entering state SEND_REQUEST2
>>
>> 1431101867.894855: EAP: EAP entering state IDLE2
>>
>> 1431101867.894857: EAP: retransmit timeout 3 seconds (from dynamic
>> back off;
>> retransCount=0)
>>
>> 1431101867.894859: IEEE 802.1X: 00:24:d7:6f:eb:c4 BE_AUTH entering
>> state REQUEST
>>
>> 1431101867.894864: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X: Sending
>> EAP Packet (identifier 81)
>>
>> 1431101867.902143: IEEE 802.1X: 212 bytes from 00:24:d7:6f:eb:c4
>>
>> 1431101867.902157: IEEE 802.1X: version=1 type=0 length=208
>>
>> 1431101867.902173: EAP: code=2 identifier=81 length=208
>>
>> 1431101867.902175: (response)
>>
>> 1431101867.902180: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X: received
>> EAP packet (code=2 id=81 len=208) from STA: EAP Response-PEAP (25)
>>
>> 1431101867.902198: IEEE 802.1X: 00:24:d7:6f:eb:c4 BE_AUTH entering
>> state RESPONSE
>>
>> 1431101867.902203: EAP: EAP entering state RECEIVED2
>>
>> 1431101867.902205: EAP: parseEapResp: rxResp=1 respId=81 respMethod=25
>> respVendor=0 respVendorMethod=0
>>
>> 1431101867.902207: EAP: EAP entering state AAA_REQUEST
>>
>> 1431101867.902209: EAP: EAP entering state AAA_IDLE
>>
>> 1431101867.902211: Encapsulating EAP message into a RADIUS packet
>>
>> 1431101867.902219: Copied RADIUS State Attribute
>>
>> 1431101867.902225: wlan0: RADIUS Sending RADIUS message to
>> authentication server
>>
>> 1431101867.902244: wlan0: RADIUS Next RADIUS client retransmit in 3
>> seconds
>>
>>
>>
>> 1431101867.905030: wlan0: RADIUS Received 123 bytes from RADIUS server
>>
>> 1431101867.905067: wlan0: RADIUS Received RADIUS message
>>
>> 1431101867.905078: wlan0: STA 00:24:d7:6f:eb:c4 RADIUS: Received
>> RADIUS packet matched with a pending request, round trip time 0.00 sec
>>
>> 1431101867.905090: RADIUS packet matching with station
>> 00:24:d7:6f:eb:c4
>>
>> 1431101867.905097: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X:
>> decapsulated EAP packet (code=1 id=82 len=65) from RADIUS server:
>> EAP-Request-PEAP (25)
>>
>> 1431101867.905114: EAP: EAP entering state AAA_RESPONSE
>>
>> 1431101867.905118: EAP: getId: id=82
>>
>> 1431101867.905120: EAP: EAP entering state SEND_REQUEST2
>>
>> 1431101867.905122: EAP: EAP entering state IDLE2
>>
>> 1431101867.905124: EAP: retransmit timeout 3 seconds (from dynamic
>> back off;
>> retransCount=0)
>>
>> 1431101867.905126: IEEE 802.1X: 00:24:d7:6f:eb:c4 BE_AUTH entering
>> state REQUEST
>>
>> 1431101867.905131: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X: Sending
>> EAP Packet (identifier 82)
>>
>> 1431101867.905787: IEEE 802.1X: 10 bytes from 00:24:d7:6f:eb:c4
>>
>> 1431101867.905794: IEEE 802.1X: version=1 type=0 length=6
>>
>> 1431101867.905797: EAP: code=2 identifier=82 length=6
>>
>> 1431101867.905799: (response)
>>
>> 1431101867.905804: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X: received
>> EAP packet (code=2 id=82 len=6) from STA: EAP Response-PEAP (25)
>>
>> 1431101867.905822: IEEE 802.1X: 00:24:d7:6f:eb:c4 BE_AUTH entering
>> state RESPONSE
>>
>> 1431101867.905826: EAP: EAP entering state RECEIVED2
>>
>> 1431101867.905828: EAP: parseEapResp: rxResp=1 respId=82 respMethod=25
>> respVendor=0 respVendorMethod=0
>>
>> 1431101867.905831: EAP: EAP entering state AAA_REQUEST
>>
>> 1431101867.905833: EAP: EAP entering state AAA_IDLE
>>
>> 1431101867.905835: Encapsulating EAP message into a RADIUS packet
>>
>> 1431101867.905843: Copied RADIUS State Attribute
>>
>> 1431101867.905848: wlan0: RADIUS Sending RADIUS message to
>> authentication server
>>
>> 1431101867.905867: wlan0: RADIUS Next RADIUS client retransmit in 3
>> seconds
>>
>>
>>
>> 1431101867.906465: wlan0: RADIUS Received 101 bytes from RADIUS server
>>
>> 1431101867.906501: wlan0: RADIUS Received RADIUS message
>>
>> 1431101867.906512: wlan0: STA 00:24:d7:6f:eb:c4 RADIUS: Received
>> RADIUS packet matched with a pending request, round trip time 0.00 sec
>>
>> 1431101867.906523: RADIUS packet matching with station
>> 00:24:d7:6f:eb:c4
>>
>> 1431101867.906529: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X:
>> decapsulated EAP packet (code=1 id=83 len=43) from RADIUS server:
>> EAP-Request-PEAP (25)
>>
>> 1431101867.906541: EAP: EAP entering state AAA_RESPONSE
>>
>> 1431101867.906544: EAP: getId: id=83
>>
>> 1431101867.906546: EAP: EAP entering state SEND_REQUEST2
>>
>> 1431101867.906548: EAP: EAP entering state IDLE2
>>
>> 1431101867.906550: EAP: retransmit timeout 3 seconds (from dynamic
>> back off;
>> retransCount=0)
>>
>> 1431101867.906552: IEEE 802.1X: 00:24:d7:6f:eb:c4 BE_AUTH entering
>> state REQUEST
>>
>> 1431101867.906556: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X: Sending
>> EAP Packet (identifier 83)
>>
>> 1431101867.907142: IEEE 802.1X: 84 bytes from 00:24:d7:6f:eb:c4
>>
>> 1431101867.907155: IEEE 802.1X: version=1 type=0 length=80
>>
>> 1431101867.907172: EAP: code=2 identifier=83 length=80
>>
>> 1431101867.907174: (response)
>>
>> 1431101867.907179: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X: received
>> EAP packet (code=2 id=83 len=80) from STA: EAP Response-PEAP (25)
>>
>> 1431101867.907196: IEEE 802.1X: 00:24:d7:6f:eb:c4 BE_AUTH entering
>> state RESPONSE
>>
>> 1431101867.907200: EAP: EAP entering state RECEIVED2
>>
>> 1431101867.907202: EAP: parseEapResp: rxResp=1 respId=83 respMethod=25
>> respVendor=0 respVendorMethod=0
>>
>> 1431101867.907204: EAP: EAP entering state AAA_REQUEST
>>
>> 1431101867.907206: EAP: EAP entering state AAA_IDLE
>>
>> 1431101867.907208: Encapsulating EAP message into a RADIUS packet
>>
>> 1431101867.907216: Copied RADIUS State Attribute
>>
>> 1431101867.907221: wlan0: RADIUS Sending RADIUS message to
>> authentication server
>>
>> 1431101867.907240: wlan0: RADIUS Next RADIUS client retransmit in 3
>> seconds
>>
>>
>>
>> 1431101867.907972: wlan0: RADIUS Received 133 bytes from RADIUS server
>>
>> 1431101867.908012: wlan0: RADIUS Received RADIUS message
>>
>> 1431101867.908027: wlan0: STA 00:24:d7:6f:eb:c4 RADIUS: Received
>> RADIUS packet matched with a pending request, round trip time 0.00 sec
>>
>> 1431101867.908046: RADIUS packet matching with station
>> 00:24:d7:6f:eb:c4
>>
>> 1431101867.908057: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X:
>> decapsulated EAP packet (code=1 id=84 len=75) from RADIUS server:
>> EAP-Request-PEAP (25)
>>
>> 1431101867.908077: EAP: EAP entering state AAA_RESPONSE
>>
>> 1431101867.908080: EAP: getId: id=84
>>
>> 1431101867.908082: EAP: EAP entering state SEND_REQUEST2
>>
>> 1431101867.908085: EAP: EAP entering state IDLE2
>>
>> 1431101867.908086: EAP: retransmit timeout 3 seconds (from dynamic
>> back off;
>> retransCount=0)
>>
>> 1431101867.908089: IEEE 802.1X: 00:24:d7:6f:eb:c4 BE_AUTH entering
>> state REQUEST
>>
>> 1431101867.908094: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X: Sending
>> EAP Packet (identifier 84)
>>
>> 1431101867.909646: IEEE 802.1X: 148 bytes from 00:24:d7:6f:eb:c4
>>
>> 1431101867.909670: IEEE 802.1X: version=1 type=0 length=144
>>
>> 1431101867.909674: EAP: code=2 identifier=84 length=144
>>
>> 1431101867.909677: (response)
>>
>> 1431101867.909684: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X: received
>> EAP packet (code=2 id=84 len=144) from STA: EAP Response-PEAP (25)
>>
>> 1431101867.909709: IEEE 802.1X: 00:24:d7:6f:eb:c4 BE_AUTH entering
>> state RESPONSE
>>
>> 1431101867.909716: EAP: EAP entering state RECEIVED2
>>
>> 1431101867.909719: EAP: parseEapResp: rxResp=1 respId=84 respMethod=25
>> respVendor=0 respVendorMethod=0
>>
>> 1431101867.909724: EAP: EAP entering state AAA_REQUEST
>>
>> 1431101867.909728: EAP: EAP entering state AAA_IDLE
>>
>> 1431101867.909732: Encapsulating EAP message into a RADIUS packet
>>
>> 1431101867.909743: Copied RADIUS State Attribute
>>
>> 1431101867.909753: wlan0: RADIUS Sending RADIUS message to
>> authentication server
>>
>> 1431101867.909781: wlan0: RADIUS Next RADIUS client retransmit in 3
>> seconds
>>
>>
>>
>> 1431101867.920871: wlan0: RADIUS Received 149 bytes from RADIUS server
>>
>> 1431101867.920907: wlan0: RADIUS Received RADIUS message
>>
>> 1431101867.920923: wlan0: STA 00:24:d7:6f:eb:c4 RADIUS: Received
>> RADIUS packet matched with a pending request, round trip time 0.01 sec
>>
>> 1431101867.920942: RADIUS packet matching with station
>> 00:24:d7:6f:eb:c4
>>
>> 1431101867.920952: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X:
>> decapsulated EAP packet (code=1 id=85 len=91) from RADIUS server:
>> EAP-Request-PEAP (25)
>>
>> 1431101867.920972: EAP: EAP entering state AAA_RESPONSE
>>
>> 1431101867.920976: EAP: getId: id=85
>>
>> 1431101867.920977: EAP: EAP entering state SEND_REQUEST2
>>
>> 1431101867.920979: EAP: EAP entering state IDLE2
>>
>> 1431101867.920981: EAP: retransmit timeout 3 seconds (from dynamic
>> back off;
>> retransCount=0)
>>
>> 1431101867.920984: IEEE 802.1X: 00:24:d7:6f:eb:c4 BE_AUTH entering
>> state REQUEST
>>
>> 1431101867.920988: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X: Sending
>> EAP Packet (identifier 85)
>>
>> 1431101867.922767: IEEE 802.1X: 84 bytes from 00:24:d7:6f:eb:c4
>>
>> 1431101867.922782: IEEE 802.1X: version=1 type=0 length=80
>>
>> 1431101867.922798: EAP: code=2 identifier=85 length=80
>>
>> 1431101867.922800: (response)
>>
>> 1431101867.922804: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X: received
>> EAP packet (code=2 id=85 len=80) from STA: EAP Response-PEAP (25)
>>
>> 1431101867.922823: IEEE 802.1X: 00:24:d7:6f:eb:c4 BE_AUTH entering
>> state RESPONSE
>>
>> 1431101867.922827: EAP: EAP entering state RECEIVED2
>>
>> 1431101867.922829: EAP: parseEapResp: rxResp=1 respId=85 respMethod=25
>> respVendor=0 respVendorMethod=0
>>
>> 1431101867.922832: EAP: EAP entering state AAA_REQUEST
>>
>> 1431101867.922834: EAP: EAP entering state AAA_IDLE
>>
>> 1431101867.922837: Encapsulating EAP message into a RADIUS packet
>>
>> 1431101867.922844: Copied RADIUS State Attribute
>>
>> 1431101867.922850: wlan0: RADIUS Sending RADIUS message to
>> authentication server
>>
>> 1431101867.922869: wlan0: RADIUS Next RADIUS client retransmit in 3
>> seconds
>>
>>
>>
>> 1431101867.962095: wlan0: RADIUS Received 101 bytes from RADIUS server
>>
>> 1431101867.962130: wlan0: RADIUS Received RADIUS message
>>
>> 1431101867.962140: wlan0: STA 00:24:d7:6f:eb:c4 RADIUS: Received
>> RADIUS packet matched with a pending request, round trip time 0.03 sec
>>
>> 1431101867.962152: RADIUS packet matching with station
>> 00:24:d7:6f:eb:c4
>>
>> 1431101867.962158: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X:
>> decapsulated EAP packet (code=1 id=86 len=43) from RADIUS server:
>> EAP-Request-PEAP (25)
>>
>> 1431101867.962171: EAP: EAP entering state AAA_RESPONSE
>>
>> 1431101867.962174: EAP: getId: id=86
>>
>> 1431101867.962176: EAP: EAP entering state SEND_REQUEST2
>>
>> 1431101867.962178: EAP: EAP entering state IDLE2
>>
>> 1431101867.962179: EAP: retransmit timeout 3 seconds (from dynamic
>> back off;
>> retransCount=0)
>>
>> 1431101867.962182: IEEE 802.1X: 00:24:d7:6f:eb:c4 BE_AUTH entering
>> state REQUEST
>>
>> 1431101867.962186: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X: Sending
>> EAP Packet (identifier 86)
>>
>> 1431101867.970388: IEEE 802.1X: 84 bytes from 00:24:d7:6f:eb:c4
>>
>> 1431101867.970403: IEEE 802.1X: version=1 type=0 length=80
>>
>> 1431101867.970419: EAP: code=2 identifier=86 length=80
>>
>> 1431101867.970421: (response)
>>
>> 1431101867.970426: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X: received
>> EAP packet (code=2 id=86 len=80) from STA: EAP Response-PEAP (25)
>>
>> 1431101867.970446: IEEE 802.1X: 00:24:d7:6f:eb:c4 BE_AUTH entering
>> state RESPONSE
>>
>> 1431101867.970450: EAP: EAP entering state RECEIVED2
>>
>> 1431101867.970452: EAP: parseEapResp: rxResp=1 respId=86 respMethod=25
>> respVendor=0 respVendorMethod=0
>>
>> 1431101867.970455: EAP: EAP entering state AAA_REQUEST
>>
>> 1431101867.970457: EAP: EAP entering state AAA_IDLE
>>
>> 1431101867.970459: Encapsulating EAP message into a RADIUS packet
>>
>> 1431101867.970467: Copied RADIUS State Attribute
>>
>> 1431101867.970473: wlan0: RADIUS Sending RADIUS message to
>> authentication server
>>
>> 1431101867.970492: wlan0: RADIUS Next RADIUS client retransmit in 3
>> seconds
>>
>>
>>
>> 1431101867.971435: wlan0: RADIUS Received 167 bytes from RADIUS server
>>
>> 1431101867.971473: wlan0: RADIUS Received RADIUS message
>>
>> 1431101867.971489: wlan0: STA 00:24:d7:6f:eb:c4 RADIUS: Received
>> RADIUS packet matched with a pending request, round trip time 0.00 sec
>>
>> 1431101867.971507: RADIUS packet matching with station
>> 00:24:d7:6f:eb:c4
>>
>> 1431101867.971520: MS-MPPE-Send-Key - hexdump(len=32): [REMOVED]
>>
>> 1431101867.971524: MS-MPPE-Recv-Key - hexdump(len=32): [REMOVED]
>>
>> 1431101867.971529: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X: old
>> identity 'zenon' updated with User-Name from Access-Accept 'zenon'
>>
>> 1431101867.971545: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X:
>> decapsulated EAP packet (code=3 id=86 len=4) from RADIUS server: EAP
>> Success
>>
>> 1431101867.971558: EAP: EAP entering state SUCCESS2
>>
>> 1431101867.971561: IEEE 802.1X: 00:24:d7:6f:eb:c4 BE_AUTH entering
>> state SUCCESS
>>
>> 1431101867.971566: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.1X: Sending
>> EAP Packet (identifier 86)
>>
>> 1431101867.971586: IEEE 802.1X: 00:24:d7:6f:eb:c4 BE_AUTH entering
>> state IDLE
>>
>> 1431101867.971597: WPA: 00:24:d7:6f:eb:c4 WPA_PTK entering state
>> INITPMK
>>
>> 1431101867.971600: WPA: PMK from EAPOL state machine (len=64)
>>
>> 1431101867.971603: WPA: 00:24:d7:6f:eb:c4 WPA_PTK entering state
>> PTKSTART
>>
>> 1431101867.971607: wlan0: STA 00:24:d7:6f:eb:c4 WPA: sending 1/4 msg
>> of 4-Way Handshake
>>
>> 1431101867.971618: WPA: Send EAPOL(version=1 secure=0 mic=0 ack=1
>> install=0
>> pairwise=8 kde_len=0 keyidx=0 encr=0)
>>
>> 1431101867.986144: IEEE 802.1X: 123 bytes from 00:24:d7:6f:eb:c4
>>
>> 1431101867.986164: IEEE 802.1X: version=1 type=3 length=119
>>
>> 1431101867.986174: wlan0: STA 00:24:d7:6f:eb:c4 WPA: received
>> EAPOL-Key frame (2/4 Pairwise)
>>
>> 1431101867.986192: WPA: 00:24:d7:6f:eb:c4 WPA_PTK entering state
>> PTKCALCNEGOTIATING
>>
>> 1431101867.986213: WPA: PTK derivation - A1=00:0e:2e:c4:2f:e7
>> A2=00:24:d7:6f:eb:c4
>>
>> 1431101867.986220: WPA: PMK - hexdump(len=32): [REMOVED]
>>
>> 1431101867.986224: WPA: PTK - hexdump(len=64): [REMOVED]
>>
>> 1431101867.986232: WPA: 00:24:d7:6f:eb:c4 WPA_PTK entering state
>> PTKCALCNEGOTIATING2
>>
>> 1431101867.986237: WPA: 00:24:d7:6f:eb:c4 WPA_PTK entering state
>> PTKINITNEGOTIATING
>>
>> 1431101867.986243: bsd_get_seqnum: addr=00:00:00:00:00:00 idx=1
>>
>> 1431101867.986255: wlan0: STA 00:24:d7:6f:eb:c4 WPA: sending 3/4 msg
>> of 4-Way Handshake
>>
>> 1431101867.986272: WPA: Send EAPOL(version=1 secure=0 mic=1 ack=1
>> install=1
>> pairwise=8 kde_len=24 keyidx=0 encr=0)
>>
>> 1431101867.986765: IEEE 802.1X: 99 bytes from 00:24:d7:6f:eb:c4
>>
>> 1431101867.986779: IEEE 802.1X: version=1 type=3 length=95
>>
>> 1431101867.986797: wlan0: STA 00:24:d7:6f:eb:c4 WPA: received
>> EAPOL-Key frame (4/4 Pairwise)
>>
>> 1431101867.986814: WPA: 00:24:d7:6f:eb:c4 WPA_PTK entering state
>> PTKINITDONE
>>
>> 1431101867.986818: bsd_set_key: alg=2 addr=0x8014908d0 key_idx=0
>> set_tx=1
>> seq_len=0 key_len=32
>>
>> 1431101867.986868: ioctl[SIOCS80211, op=19, val=0, arg_len=64]: Device
>> not configured
>>
>> 1431101867.986874: hostapd_wpa_auth_disconnect: WPA authenticator
>> requests
>> disconnect: STA 00:24:d7:6f:eb:c4 reason 2
>>
>> 1431101867.986901: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.11:
>> deauthenticated due to local deauth request
>>
>> 1431101867.986919: EAP: Server state machine removed
>>
>> 1431101867.986928: wlan0: STA 00:24:d7:6f:eb:c4 IEEE 802.11:
>> disassociated
>>
>> 1431101867.986936: Disassociation notification for unknown STA
>> 00:24:d7:6f:eb:c4
>>
>> ^C1431101872.085020: Signal 2 received - terminating
>>
>> 1431101872.085031: Flushing old station entries
>>
>> 1431101872.085040: Deauthenticate all stations
>>
>> 1431101872.085121: wlan0: RADIUS Sending RADIUS message to accounting
>> server
>>
>> 1431101872.085149: bsd_set_privacy: enabled=0
>>
>> 1431101872.085156: bsd_set_opt_ie: set WPA+RSN ie (len 0)
>>
>> 1431101872.085166: bsd_set_ieee8021x: enabled=0
>>
>>
>>
>> hostapd.conf:
>>
>> interface=wlan0
>>
>> driver=bsd
>>
>> logger_syslog=-1
>>
>> logger_syslog_level=0
>>
>> debug=2
>>
>> dump_file=/tmp/hostapd.dump
>>
>> ctrl_interface=/var/run/hostapd
>>
>> ctrl_interface_group=0
>>
>> ssid=RADIUS
>>
>> hw_mode=g
>>
>> own_ip_addr=127.0.0.1
>>
>> ieee8021x=1
>>
>> nas_identifier=app-k7
>>
>> auth_server_addr=10.146.20.137
>>
>> auth_server_port=1812
>>
>> auth_server_shared_secret=azxswqtgbnhyt
>>
>> acct_server_addr=10.146.20.137
>>
>> acct_server_port=1813
>>
>> acct_server_shared_secret=azxswqtgbnhyt
>>
>> radius_retry_primary_interval=600
>>
>> radius_acct_interim_interval=900
>>
>> wpa=1
>>
>> wpa_key_mgmt=WPA-EAP
>>
>>
>>
>> Best regards
>>
>> Marcin Michta
>>
>> _______________________________________________
>> freebsd-wireless at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
>> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe at freebsd.org"
>
More information about the freebsd-wireless
mailing list