Intel Centrino Wireless-N 2230 status

[Adrian Chadd]

Also, do you run this with -bgscan ?


-a


On 5 September 2014 12:26, Adrian Chadd <adrian at freebsd.org> wrote:
> Hi!
>
> This is just an iwn panic. Did your actual -HEAD kernel panic?
>
> Try doing this with sysctl dev.iwn.0.debug=0xff; let's see what
> happens just before the firmware loses its mind.
>
> Thanks!
>
>
> -a
>
>
> On 5 September 2014 12:22, Oliver Pinter <oliver.pntr at gmail.com> wrote:
>> I got the attached iwn panic, even if running in -ht mode. In between
>> I have a working connection.
>> I set up now a serial console and try to enable the ht mode with debugging.
>>
>> On 9/3/14, Oliver Pinter <oliver.pntr at gmail.com> wrote:
>>> Or not, I forgot  the -ht option in rc.conf.
>>>
>>> G STA + G AP = ok
>>> G STA + N AP = ok
>>> N STA + N AP = fail
>>>
>>> On 9/3/14, Oliver Pinter <oliver.pntr at gmail.com> wrote:
>>>> Hi!
>>>>
>>>> Small status update:
>>>> The mode N works too, I mistyped the other AP's passwork.
>>>> So both mode G and mode N working after the backports.
>>>>
>>>> BTW, can you MFC the same changes to 10.1?
>>>>
>>>> On 9/2/14, Adrian Chadd <adrian at freebsd.org> wrote:
>>>>> Hi,
>>>>>
>>>>> Compile it with IWN_DEBUG, then
>>>>>
>>>>> sysctl dev.iwn.0.debug=0x1
>>>>>
>>>>>
>>>>> -a
>>>>>
>>>>>
>>>>> On 2 September 2014 12:41, Oliver Pinter <oliver.pntr at gmail.com> wrote:
>>>>>> I not tried freebsd-head yet, but I'm able today. In mode N seems like
>>>>>> the NIC sends only one frame, and no more.
>>>>>>
>>>>>> With tcpdump and/or wlandebug I see only rx packets and no tx.
>>>>>>
>>>>>> If you add some pointer what changes must I create to easier debug, or
>>>>>> what concrete information required, feel free to ping me or send the
>>>>>> details.
>>>>>>
>>>>>> On 9/2/14, Adrian Chadd <adrian at freebsd.org> wrote:
>>>>>>> Cool! Have you tried freebsd-head? Does it work there?
>>>>>>>
>>>>>>> How's it failing in association state? What's it saying?
>>>>>>>
>>>>>>>
>>>>>>> -a
>>>>>>>
>>>>>>>
>>>>>>> On 2 September 2014 12:30, Oliver Pinter <oliver.pntr at gmail.com>
>>>>>>> wrote:
>>>>>>>> Hi All!
>>>>>>>>
>>>>>>>> After I backported all of the net80211 and iwn changes from
>>>>>>>> 11-CURRENT
>>>>>>>> to 10-STABLE the wireless NIC in subject working on mode G. If I try
>>>>>>>> to use with mode N (ht20, ht40) it failed in association state.
>>>>>>>>
>>>>>>>> All of the backports are in this github repo:
>>>>>>>>
>>>>>>>> https://github.com/opntr/opBSD/commits/op/stable/10-iwn-backport
>>>>>>>>
>>>>>>>> Oliver
>>>>>>>
>>>>>
>>>>
>>>