"run" card (RT3071) very slow connection

[Kevin Lo]

On Thu, Nov 27, 2014 at 05:08:15PM +0000, Miguel Clara wrote:
> 
> I've mailing the list before about and issue with 5Ghtz which I then found
> was actually the fact that 11n is not supported on USB cards!
> 
> Still I have a 100/10 fibre connection, and I've been testing some FreeBSD
> 11-current stuff on the laptop with this card (the on-board card is not
> supported by freebsd)
> 
> I'm very close to the router and can't get a better connection than 7-8M
> download and on local speeds its not better than that (tested with iperf).
> 
> The on-board card is a Broadcom 4333 and I got better performance with this
> one (using ndis) but it crashes a lot so its not really a better option.
> 
> To be clear the card is connected to the 2.4Ghtz network which accepts
> N/G/B, I have the 5Ghtz set to N only as this is currently the only device
> at home using 2.4Ghtz.
> 
> I don't expect getting the full 54M limit but this is really poor!
> 
> What info can I post to better investigate?

We answered your question, no?
https://lists.freebsd.org/pipermail/freebsd-wireless/2014-August/004912.html

> 
> Melhores Cumprimentos // Best Regards
> -----------------------------------------------
> *Miguel Clara*

	Kevin