Atheros 5413 + half/quarter width

[Johann Hugo]

Hi

Is half/quarter width working for Atheros 5413 (looks like it) ?
https://wiki.freebsd.org/dev/ath_hal(4)/HalfQuarterRate


Will the output of "ifconfig -v wlan2" show if it is supported ?


Is it supported in FreeBSD 9.0 or do I need to upgrade to CURRENT ?


Do I need compile time flags/options to enable half/quarter width support ?


Is this the correct way to configure it ?
ifconfig wlan2 channel 6:g/10
ifconfig: unknown/undefined channel number 6 flags 0x40a0



Other info

Wifi Adapter = http://www.doodlelabs.com/products/radio-transceivers/sub-ghz-
range/470-790-mhz-tvws-100/

tvws1:~ # uname -a
FreeBSD tvws1 9.0-STABLE FreeBSD 9.0-STABLE

ath2: <Atheros 5413> irq 26 at device 3.0 on pci0
ath2: AR5413 mac 10.5 RF5413 phy 6.1

wlan2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether 00:30:1a:46:0a:5f
        inet6 fe80::230:1aff:fe46:a5f%wlan2 prefixlen 64 scopeid 0xa 
        inet 10.10.165.1 netmask 0xffffff00 broadcast 10.10.165.255
        inet6 fd9c:6829:597c:aa5:230:1aff:fe46:a5f prefixlen 64 
        inet6 fd9c:6829:597c:aa5:: prefixlen 64 anycast 
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        media: IEEE 802.11 Wireless Ethernet autoselect mode 11b <adhoc>
        status: running
        ssid tvws channel 14 (2484 MHz 11b) bssid 00:00:00:00:00:01
        regdomain JAPAN country JP ecm authmode OPEN privacy OFF txpower 30
        scanvalid 60 wme burst


Johann