Fwd: FreeBSD 10.0: hostapd crash with Ralink 3070

[Pedro Flynn]

(sorry - this reply was sent only to Hiren. Here is it for the list)


Hi Hiren,

this is what I get immediately after starting hostapd - via "service
hostapd onestart", since I need to do it manually as the system will reboot
in loop if I enable
hostapd in rc.conf):

KDB: stack backtrace
#0 0xffffffff808e7dd0 at kbd_backtrace+0x60
#1 0xffffffff808af8b5 at panic+0x115
#2 0xffffffff80c8e692 at trap_fatal+0x3a2
#3 0xffffffff80c8e969 at trap_pfault+0x2c9
#4 0xffffffff80c8e0f6 at trap+0x5e6
#5 0xffffffff80c75392 at calltrap+0x8
#6 0xffffffff81a158bc at run_update_beacon+0x16c
#7 0xffffffff809b42bd at ieee80211_wme_update_params_locked+0x32d
#8 0xffffffff809b437a at ieee80211_wme_update_params+0x5a
#9 0xffffffff809bb3f43 at ieee80211_wme_init_params+0x2a3
#10 0xffffffff809a9aec at ieee80211_sta_join1+0xdc
#11 0xffffffff8099047b at hostap_newstate+0x2eb
#12 0xffffffff81a1636a at run_newstate+0x83a
#13 0xffffffff809b2edf at ieee80211_newstate_cb+0x14f
#14 0xffffffff808f5b66 at taskqueue_run_locked+0xe6
#15 0xffffffff808f63e8 at taskqueue_thread_loop+0xa8
#16 0xffffffff8088198a at fork_exit+0x9a
#17 0xffffffff80c758ce at fork_trampoline+0xe
Uptime: 45 s
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the station now.

Thanks for any help or suggestion.

pflynn


On Mon, Jan 27, 2014 at 8:43 PM, hiren panchasara <
hiren.panchasara at gmail.com> wrote:

> On Mon, Jan 27, 2014 at 2:16 PM, Pedro Flynn <pedro.flynn at gmail.com>
> wrote:
>
> > I can provide information as needed.
>
> Sharing lots of kernel debug messages that you are seeing might be a
> good start :-)
>
> cheers,
> Hiren
>