ar9580 failures (typo correction)
Adrian Chadd
adrian at freebsd.org
Tue Jan 14 16:28:26 UTC 2014
Hi
You need ATH_ENABLE_11N in your kernel config.
-a
On 14 January 2014 05:50, Christophe Prevotaux
<c.prevotaux at rural-networks.com> wrote:
> Hi Everyone,
>
> I am running a FreeBSD/amd64 30/12/2013 CURRENT Snapshot on a Soekris 6501 with :
>
> options ATH_ENABLED_11N
> options mptable # (soekris 6501 requires it)
>
> and I get the following messages and failures :
>
> ath0: stuck beacon; resetting (bmiss count 0)
> ath0: stuck beacon; resetting (bmiss count 0)
> ath1: ath_edma_rxbuf_alloc: nothing on rxbuf?!
> ath0: stuck beacon; resetting (bmiss count 0)
> ath1: ath_edma_rxfifo_alloc: Q1: alloc failed: i=1, nbufs=128?
> ath1: ath_edma_rxbuf_alloc: nothing on rxbuf?!
> ath1: ath_edma_rxfifo_alloc: Q1: alloc failed: i=0, nbufs=128?
> ath1: ath_edma_rxbuf_alloc: nothing on rxbuf?!
> ath1: ath_edma_rxfifo_alloc: Q1: alloc failed: i=0, nbufs=128?
> ath1: ath_edma_rxbuf_alloc: nothing on rxbuf?!
> ath1: ath_edma_rxfifo_alloc: Q1: alloc failed: i=0, nbufs=128?
> ath0: stuck beacon; resetting (bmiss count 4)
> ath0: stuck beacon; resetting (bmiss count 0)
>
> The machine I am using has 2 AR9580 MiniPCIe Cards
>
> ath0
> ath1
>
>
> But traffic using iperf was generated on ath0 and ath1
>
> Here is the pciconf -lv
>
> hostb0 at pci0:0:0:0: class=0x060000 card=0x00000000 chip=0x41158086 rev=0x05 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Atom Processor E6xx PCI Host Bridge'
> class = bridge
> subclass = HOST-PCI
> hostb1 at pci0:0:1:0: class=0x060000 card=0x00000000 chip=0x81838086 rev=0x00 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Atom Processor E6xx Configuration Unit'
> class = bridge
> subclass = HOST-PCI
> pcib1 at pci0:0:23:0: class=0x060400 card=0x00000000 chip=0x81848086 rev=0x00 hdr=0x01
> vendor = 'Intel Corporation'
> device = 'Atom Processor E6xx PCI Express Port 1'
> class = bridge
> subclass = PCI-PCI
> pcib3 at pci0:0:24:0: class=0x060400 card=0x00000000 chip=0x81858086 rev=0x00 hdr=0x01
> vendor = 'Intel Corporation'
> device = 'Atom Processor E6xx PCI Express Port 2'
> class = bridge
> subclass = PCI-PCI
> pcib8 at pci0:0:25:0: class=0x060400 card=0x00000000 chip=0x81808086 rev=0x00 hdr=0x01
> vendor = 'Intel Corporation'
> device = 'Atom Processor E6xx PCI Express Port 3'
> class = bridge
> subclass = PCI-PCI
> pcib13 at pci0:0:26:0: class=0x060400 card=0x00000000 chip=0x81818086 rev=0x00 hdr=0x01
> vendor = 'Intel Corporation'
> device = 'Atom Processor E6xx PCI Express Port 4'
> class = bridge
> subclass = PCI-PCI
> isab0 at pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x81868086 rev=0x00 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Atom Processor E6xx LPC Bridge'
> class = bridge
> subclass = PCI-ISA
> pcib2 at pci0:1:0:0: class=0x060400 card=0x00000000 chip=0x88008086 rev=0x01 hdr=0x01
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T PCI Express Port'
> class = bridge
> subclass = PCI-PCI
> none0 at pci0:2:0:0: class=0xff0000 card=0x00000000 chip=0x88018086 rev=0x01 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T Packet Hub'
> none1 at pci0:2:0:1: class=0x020000 card=0x00000000 chip=0x88028086 rev=0x01 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T Gigabit Ethernet Controller'
> class = network
> subclass = ethernet
> none2 at pci0:2:0:2: class=0xff0000 card=0x00000000 chip=0x88038086 rev=0x00 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T General Purpose IO Controller'
> ohci0 at pci0:2:2:0: class=0x0c0310 card=0x00000000 chip=0x88048086 rev=0x01 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T USB OHCI Controller'
> class = serial bus
> subclass = USB
> ohci1 at pci0:2:2:1: class=0x0c0310 card=0x00000000 chip=0x88058086 rev=0x01 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T USB OHCI Controller'
> class = serial bus
> subclass = USB
> ohci2 at pci0:2:2:2: class=0x0c0310 card=0x00000000 chip=0x88068086 rev=0x01 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T USB OHCI Controller'
> class = serial bus
> subclass = USB
> ehci0 at pci0:2:2:3: class=0x0c0320 card=0x00000000 chip=0x88078086 rev=0x01 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T USB2 EHCI Controller'
> class = serial bus
> subclass = USB
> none3 at pci0:2:2:4: class=0x0c03fe card=0x00000000 chip=0x88088086 rev=0x01 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T USB Client Controller'
> class = serial bus
> subclass = USB
> sdhci_pci0 at pci0:2:4:0: class=0x080501 card=0x00000000 chip=0x88098086 rev=0x01 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T SDIO Controller'
> class = base peripheral
> subclass = SD host controller
> sdhci_pci1 at pci0:2:4:1: class=0x080501 card=0x00000000 chip=0x880a8086 rev=0x01 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T SDIO Controller'
> class = base peripheral
> subclass = SD host controller
> ahci0 at pci0:2:6:0: class=0x010601 card=0x00000000 chip=0x880b8086 rev=0x01 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T SATA AHCI Controller'
> class = mass storage
> subclass = SATA
> ohci3 at pci0:2:8:0: class=0x0c0310 card=0x00000000 chip=0x880c8086 rev=0x01 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T USB OHCI Controller'
> class = serial bus
> subclass = USB
> ohci4 at pci0:2:8:1: class=0x0c0310 card=0x00000000 chip=0x880d8086 rev=0x01 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T USB OHCI Controller'
> class = serial bus
> subclass = USB
> ohci5 at pci0:2:8:2: class=0x0c0310 card=0x00000000 chip=0x880e8086 rev=0x01 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T USB OHCI Controller'
> class = serial bus
> subclass = USB
> ehci1 at pci0:2:8:3: class=0x0c0320 card=0x00000000 chip=0x880f8086 rev=0x01 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T USB2 EHCI Controller'
> class = serial bus
> subclass = USB
> none4 at pci0:2:10:0: class=0xff0000 card=0x00000000 chip=0x88108086 rev=0x00 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T DMA Controller'
> uart2 at pci0:2:10:1: class=0x070002 card=0x00000000 chip=0x88118086 rev=0x00 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T UART Controller 0'
> class = simple comms
> subclass = UART
> uart3 at pci0:2:10:2: class=0x070002 card=0x00000000 chip=0x88128086 rev=0x00 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T UART Controller 1'
> class = simple comms
> subclass = UART
> uart4 at pci0:2:10:3: class=0x070002 card=0x00000000 chip=0x88138086 rev=0x00 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T UART Controller 2'
> class = simple comms
> subclass = UART
> uart5 at pci0:2:10:4: class=0x070002 card=0x00000000 chip=0x88148086 rev=0x00 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T UART Controller 3'
> class = simple comms
> subclass = UART
> none5 at pci0:2:12:0: class=0xff0000 card=0x00000000 chip=0x88158086 rev=0x00 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T DMA Controller'
> none6 at pci0:2:12:1: class=0x0c8000 card=0x00000000 chip=0x88168086 rev=0x00 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T Serial Peripheral Interface Bus'
> class = serial bus
> none7 at pci0:2:12:2: class=0x0c8000 card=0x00000000 chip=0x88178086 rev=0x00 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T I2C Controller'
> class = serial bus
> none8 at pci0:2:12:3: class=0x0c0900 card=0x00000000 chip=0x88188086 rev=0x00 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T Controller Area Network (CAN) Controller'
> class = serial bus
> none9 at pci0:2:12:4: class=0xff0000 card=0x00000000 chip=0x88198086 rev=0x01 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Platform Controller Hub EG20T IEEE 1588 Hardware Assist'
> pcib4 at pci0:3:0:0: class=0x060400 card=0x00000000 chip=0x803a111d rev=0x0e hdr=0x01
> vendor = 'Integrated Device Technology, Inc.'
> device = 'PES4T4 PCI Express Switch'
> class = bridge
> subclass = PCI-PCI
> pcib5 at pci0:4:2:0: class=0x060400 card=0x00000000 chip=0x803a111d rev=0x0e hdr=0x01
> vendor = 'Integrated Device Technology, Inc.'
> device = 'PES4T4 PCI Express Switch'
> class = bridge
> subclass = PCI-PCI
> pcib6 at pci0:4:3:0: class=0x060400 card=0x00000000 chip=0x803a111d rev=0x0e hdr=0x01
> vendor = 'Integrated Device Technology, Inc.'
> device = 'PES4T4 PCI Express Switch'
> class = bridge
> subclass = PCI-PCI
> pcib7 at pci0:4:4:0: class=0x060400 card=0x00000000 chip=0x803a111d rev=0x0e hdr=0x01
> vendor = 'Integrated Device Technology, Inc.'
> device = 'PES4T4 PCI Express Switch'
> class = bridge
> subclass = PCI-PCI
> em0 at pci0:5:0:0: class=0x020000 card=0x00008086 chip=0x10d38086 rev=0x00 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82574L Gigabit Network Connection'
> class = network
> subclass = ethernet
> em1 at pci0:6:0:0: class=0x020000 card=0x00008086 chip=0x10d38086 rev=0x00 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82574L Gigabit Network Connection'
> class = network
> subclass = ethernet
> pcib9 at pci0:8:0:0: class=0x060400 card=0x00000000 chip=0x803a111d rev=0x0e hdr=0x01
> vendor = 'Integrated Device Technology, Inc.'
> device = 'PES4T4 PCI Express Switch'
> class = bridge
> subclass = PCI-PCI
> pcib10 at pci0:9:2:0: class=0x060400 card=0x00000000 chip=0x803a111d rev=0x0e hdr=0x01
> vendor = 'Integrated Device Technology, Inc.'
> device = 'PES4T4 PCI Express Switch'
> class = bridge
> subclass = PCI-PCI
> pcib11 at pci0:9:3:0: class=0x060400 card=0x00000000 chip=0x803a111d rev=0x0e hdr=0x01
> vendor = 'Integrated Device Technology, Inc.'
> device = 'PES4T4 PCI Express Switch'
> class = bridge
> subclass = PCI-PCI
> pcib12 at pci0:9:4:0: class=0x060400 card=0x00000000 chip=0x803a111d rev=0x0e hdr=0x01
> vendor = 'Integrated Device Technology, Inc.'
> device = 'PES4T4 PCI Express Switch'
> class = bridge
> subclass = PCI-PCI
> em2 at pci0:10:0:0: class=0x020000 card=0x00008086 chip=0x10d38086 rev=0x00 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82574L Gigabit Network Connection'
> class = network
> subclass = ethernet
> em3 at pci0:11:0:0: class=0x020000 card=0x00008086 chip=0x10d38086 rev=0x00 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82574L Gigabit Network Connection'
> class = network
> subclass = ethernet
> pcib14 at pci0:13:0:0: class=0x060400 card=0x860510b5 chip=0x860510b5 rev=0xaa hdr=0x01
> vendor = 'PLX Technology, Inc.'
> device = 'PEX 8605 PCI Express 4-port Gen2 Switch'
> class = bridge
> subclass = PCI-PCI
> pcib15 at pci0:14:1:0: class=0x060400 card=0x860510b5 chip=0x860510b5 rev=0xaa hdr=0x01
> vendor = 'PLX Technology, Inc.'
> device = 'PEX 8605 PCI Express 4-port Gen2 Switch'
> class = bridge
> subclass = PCI-PCI
> pcib16 at pci0:14:2:0: class=0x060400 card=0x860510b5 chip=0x860510b5 rev=0xaa hdr=0x01
> vendor = 'PLX Technology, Inc.'
> device = 'PEX 8605 PCI Express 4-port Gen2 Switch'
> class = bridge
> subclass = PCI-PCI
> pcib17 at pci0:14:3:0: class=0x060400 card=0x860510b5 chip=0x860510b5 rev=0xaa hdr=0x01
> vendor = 'PLX Technology, Inc.'
> device = 'PEX 8605 PCI Express 4-port Gen2 Switch'
> class = bridge
> subclass = PCI-PCI
> ath0 at pci0:16:0:0: class=0x028000 card=0x3123168c chip=0x0033168c rev=0x01 hdr=0x00
> vendor = 'Atheros Communications Inc.'
> device = 'AR9580 Wireless Network Adapter'
> class = network
> ath1 at pci0:17:0:0: class=0x028000 card=0x3123168c chip=0x0033168c rev=0x01 hdr=0x00
> vendor = 'Atheros Communications Inc.'
> device = 'AR9580 Wireless Network Adapter'
> class = network
>
> ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
> ether 04:f0:21:04:5d:7a
> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
> media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap>
> status: running
>
> ath1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
> ether 04:f0:21:04:5d:65
> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
> media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap>
> status: running
>
>
> wlan0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
> ether 04:f0:21:04:5d:7a
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap>
> status: running
> ssid R2 channel 11 (2462 MHz 11g ht/20) bssid 04:f0:21:04:5d:7a
> regdomain FCC country CA anywhere ecm authmode WPA2/802.11i -wps -tsn
> privacy MIXED deftxkey 2
> AES-CCM 2:128-bit
> AES-CCM 3:128-bit powersavemode OFF powersavesleep 100 txpower 30
> txpowmax 50.0 -dotd rtsthreshold 2346 fragthreshold 2346 bmiss 7
> 11a ucast NONE mgmt 6 Mb/s mcast 6 Mb/s maxretry 6
> 11b ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6
> 11g ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6
> turboA ucast NONE mgmt 6 Mb/s mcast 6 Mb/s maxretry 6
> turboG ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6
> sturbo ucast NONE mgmt 6 Mb/s mcast 6 Mb/s maxretry 6
> 11na ucast NONE mgmt 12 MCS mcast 12 MCS maxretry 6
> 11ng ucast NONE mgmt 2 MCS mcast 2 MCS maxretry 6
> half ucast NONE mgmt 3 Mb/s mcast 3 Mb/s maxretry 6
> quarter ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6
> scanvalid 60 -bgscan bgscanintvl 300 bgscanidle 250
> roam:11a rssi 7dBm rate 12 Mb/s
> roam:11b rssi 7dBm rate 1 Mb/s
> roam:11g rssi 7dBm rate 5 Mb/s
> roam:turboA rssi 7dBm rate 12 Mb/s
> roam:turboG rssi 7dBm rate 12 Mb/s
> roam:sturbo rssi 7dBm rate 12 Mb/s
> roam:11na rssi 7dBm MCS 1
> roam:11ng rssi 7dBm MCS 1
> roam:half rssi 7dBm rate 6 Mb/s
> roam:quarter rssi 7dBm rate 3 Mb/s
> -pureg protmode CTS ht htcompat ampdu ampdulimit 64k ampdudensity 8
> amsdu shortgi htprotmode RTSCTS -puren -smps -rifs wme burst -dwds
> -hidessid apbridge dtimperiod 1 doth -dfs inact bintval 100
> AC_BE cwmin 4 cwmax 6 aifs 3 txopLimit 0 -acm ack
> cwmin 4 cwmax 10 aifs 3 txopLimit 0 -acm
> AC_BK cwmin 4 cwmax 10 aifs 7 txopLimit 0 -acm ack
> cwmin 4 cwmax 10 aifs 7 txopLimit 0 -acm
> AC_VI cwmin 3 cwmax 4 aifs 1 txopLimit 94 -acm ack
> cwmin 3 cwmax 4 aifs 2 txopLimit 94 -acm
> AC_VO cwmin 2 cwmax 3 aifs 1 txopLimit 47 -acm ack
> cwmin 2 cwmax 3 aifs 2 txopLimit 47 -acm
> groups: wlan
>
> wlan1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
> ether 04:f0:21:04:5d:65
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap>
> status: running
> ssid R1 channel 6 (2437 MHz 11g ht/20) bssid 04:f0:21:04:5d:65
> regdomain FCC country CA anywhere ecm authmode WPA2/802.11i -wps -tsn
> privacy MIXED deftxkey 2
> AES-CCM 2:128-bit
> AES-CCM 3:128-bit powersavemode OFF powersavesleep 100 txpower 30
> txpowmax 50.0 -dotd rtsthreshold 2346 fragthreshold 2346 bmiss 7
> 11a ucast NONE mgmt 6 Mb/s mcast 6 Mb/s maxretry 6
> 11b ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6
> 11g ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6
> turboA ucast NONE mgmt 6 Mb/s mcast 6 Mb/s maxretry 6
> turboG ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6
> sturbo ucast NONE mgmt 6 Mb/s mcast 6 Mb/s maxretry 6
> 11na ucast NONE mgmt 12 MCS mcast 12 MCS maxretry 6
> 11ng ucast NONE mgmt 2 MCS mcast 2 MCS maxretry 6
> half ucast NONE mgmt 3 Mb/s mcast 3 Mb/s maxretry 6
> quarter ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6
> scanvalid 60 -bgscan bgscanintvl 300 bgscanidle 250
> roam:11a rssi 7dBm rate 12 Mb/s
> roam:11b rssi 7dBm rate 1 Mb/s
> roam:11g rssi 7dBm rate 5 Mb/s
> roam:turboA rssi 7dBm rate 12 Mb/s
> roam:turboG rssi 7dBm rate 12 Mb/s
> roam:sturbo rssi 7dBm rate 12 Mb/s
> roam:11na rssi 7dBm MCS 1
> roam:11ng rssi 7dBm MCS 1
> roam:half rssi 7dBm rate 6 Mb/s
> roam:quarter rssi 7dBm rate 3 Mb/s
> -pureg protmode CTS ht htcompat ampdu ampdulimit 64k ampdudensity 8
> amsdu shortgi htprotmode RTSCTS -puren -smps -rifs wme burst -dwds
> -hidessid apbridge dtimperiod 1 doth -dfs inact bintval 100
> AC_BE cwmin 4 cwmax 6 aifs 3 txopLimit 0 -acm ack
> cwmin 4 cwmax 10 aifs 3 txopLimit 0 -acm
> AC_BK cwmin 4 cwmax 10 aifs 7 txopLimit 0 -acm ack
> cwmin 4 cwmax 10 aifs 7 txopLimit 0 -acm
> AC_VI cwmin 3 cwmax 4 aifs 1 txopLimit 94 -acm ack
> cwmin 3 cwmax 4 aifs 2 txopLimit 94 -acm
> AC_VO cwmin 2 cwmax 3 aifs 1 txopLimit 47 -acm ack
> cwmin 2 cwmax 3 aifs 2 txopLimit 47 -acm
> groups: wlan
>
> ACPI BIOS Error (bug): A valid RSDP was not found (20130823/tbxfroot-223)
> Copyright (c) 1992-2013 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 11.0-CURRENT #1: Wed Jan 8 20:42:57 EST 2014
> root at ap01:/usr/obj/usr/src/sys/NET6501 amd64
> FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
> CPU: Genuine Intel(R) CPU @ 600MHz (600.01-MHz K8-class CPU)
> Origin = "GenuineIntel" Id = 0x20661 Family = 0x6 Model = 0x26 Stepping = 1
> Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Features2=0x40e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
> AMD Features=0x20100800<SYSCALL,NX,LM>
> AMD Features2=0x1<LAHF>
> TSC: P-state invariant, performance statistics
> real memory = 536739840 (511 MB)
> avail memory = 496316416 (473 MB)
> MPTable: <Soekris net6501 >
> Event timer "LAPIC" quality 400
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP/HT): APIC ID: 1
> ioapic0: Assuming intbase of 0
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> random: <Software, Yarrow> initialized
> kbd0 at kbdmux0
> module_register_init: MOD_LOAD (vesa, 0xffffffff80ab3c10, 0) error 19
> ACPI BIOS Error (bug): A valid RSDP was not found (20130823/tbxfroot-223)
> ACPI: Table initialisation failed: AE_NOT_FOUND
> ACPI: Try disabling either ACPI or apic support.
> pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
> pci0: <PCI bus> on pcib0
> pcib1: <PCI-PCI bridge> irq 16 at device 23.0 on pci0
> pci1: <PCI bus> on pcib1
> pcib2: <PCI-PCI bridge> irq 16 at device 0.0 on pci1
> pci2: <PCI bus> on pcib2
> pci2: <unknown> at device 0.0 (no driver attached)
> pci2: <network, ethernet> at device 0.1 (no driver attached)
> pci2: <unknown> at device 0.2 (no driver attached)
> ohci0: <OHCI (generic) USB controller> mem 0xa0000b00-0xa0000bff irq 19 at device 2.0 on pci2
> usbus0 on ohci0
> ohci1: <OHCI (generic) USB controller> mem 0xa0000c00-0xa0000cff irq 19 at device 2.1 on pci2
> usbus1 on ohci1
> ohci2: <OHCI (generic) USB controller> mem 0xa0000d00-0xa0000dff irq 19 at device 2.2 on pci2
> usbus2 on ohci2
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xa0000e00-0xa0000eff irq 19 at device 2.3 on pci2
> usbus3: EHCI version 1.0
> usbus3 on ehci0
> pci2: <serial bus, USB> at device 2.4 (no driver attached)
> sdhci_pci0: <Generic SD HCI> mem 0xa0004000-0xa00041ff irq 18 at device 4.0 on pci2
> sdhci_pci0: 1 slot(s) allocated
> sdhci_pci1: <Generic SD HCI> mem 0xa0004200-0xa00043ff irq 18 at device 4.1 on pci2
> sdhci_pci1: 1 slot(s) allocated
> ahci0: <AHCI SATA controller> port 0x1020-0x103f mem 0xa0004400-0xa00047ff irq 17 at device 6.0 on pci2
> ahci0: AHCI v1.10 with 2 3Gbps ports, Port Multiplier supported
> ahcich0: <AHCI channel> at channel 0 on ahci0
> ahcich1: <AHCI channel> at channel 1 on ahci0
> ohci3: <OHCI (generic) USB controller> mem 0xa0004800-0xa00048ff irq 16 at device 8.0 on pci2
> usbus4 on ohci3
> ohci4: <OHCI (generic) USB controller> mem 0xa0004900-0xa00049ff irq 16 at device 8.1 on pci2
> usbus5 on ohci4
> ohci5: <OHCI (generic) USB controller> mem 0xa0004a00-0xa0004aff irq 16 at device 8.2 on pci2
> usbus6 on ohci5
> ehci1: <EHCI (generic) USB 2.0 controller> mem 0xa0004b00-0xa0004bff irq 16 at device 8.3 on pci2
> usbus7: EHCI version 1.0
> usbus7 on ehci1
> pci2: <unknown> at device 10.0 (no driver attached)
> uart2: <Intel EG20T Serial Port 0> port 0x1040-0x1047 mem 0xa0004d00-0xa0004d0f irq 19 at device 10.1 on pci2
> uart3: <Intel EG20T Serial Port 1> port 0x1048-0x104f mem 0xa0004d10-0xa0004d1f irq 19 at device 10.2 on pci2
> uart4: <Intel EG20T Serial Port 2> port 0x1050-0x1057 mem 0xa0004d20-0xa0004d2f irq 19 at device 10.3 on pci2
> uart5: <Intel EG20T Serial Port 3> port 0x1058-0x105f mem 0xa0004d30-0xa0004d3f irq 19 at device 10.4 on pci2
> pci2: <unknown> at device 12.0 (no driver attached)
> pci2: <serial bus> at device 12.1 (no driver attached)
> pci2: <serial bus> at device 12.2 (no driver attached)
> pci2: <serial bus> at device 12.3 (no driver attached)
> pci2: <unknown> at device 12.4 (no driver attached)
> pcib3: <PCI-PCI bridge> irq 17 at device 24.0 on pci0
> pci3: <PCI bus> on pcib3
> pcib4: <PCI-PCI bridge> at device 0.0 on pci3
> pci4: <PCI bus> on pcib4
> pcib5: <PCI-PCI bridge> at device 2.0 on pci4
> pci5: <PCI bus> on pcib5
> em0: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0x2000-0x201f mem 0xa1000000-0xa101ffff,0xa1020000-0xa1023fff irq 19 at device 0.0 on pci5
> em0: Using MSIX interrupts with 3 vectors
> em0: Ethernet address: 00:00:24:cf:05:30
> pcib6: <PCI-PCI bridge> at device 3.0 on pci4
> pci6: <PCI bus> on pcib6
> em1: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0x3000-0x301f mem 0xa2000000-0xa201ffff,0xa2020000-0xa2023fff irq 16 at device 0.0 on pci6
> em1: Using MSIX interrupts with 3 vectors
> em1: Ethernet address: 00:00:24:cf:05:31
> pcib7: <PCI-PCI bridge> at device 4.0 on pci4
> pci7: <PCI bus> on pcib7
> pcib8: <PCI-PCI bridge> irq 18 at device 25.0 on pci0
> pci8: <PCI bus> on pcib8
> pcib9: <PCI-PCI bridge> at device 0.0 on pci8
> pci9: <PCI bus> on pcib9
> pcib10: <PCI-PCI bridge> at device 2.0 on pci9
> pci10: <PCI bus> on pcib10
> em2: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0x4000-0x401f mem 0xa3000000-0xa301ffff,0xa3020000-0xa3023fff irq 16 at device 0.0 on pci10
> em2: Using MSIX interrupts with 3 vectors
> em2: Ethernet address: 00:00:24:cf:05:32
> pcib11: <PCI-PCI bridge> at device 3.0 on pci9
> pci11: <PCI bus> on pcib11
> em3: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0x5000-0x501f mem 0xa4000000-0xa401ffff,0xa4020000-0xa4023fff irq 17 at device 0.0 on pci11
> em3: Using MSIX interrupts with 3 vectors
> em3: Ethernet address: 00:00:24:cf:05:33
> pcib12: <PCI-PCI bridge> at device 4.0 on pci9
> pci12: <PCI bus> on pcib12
> pcib13: <PCI-PCI bridge> irq 19 at device 26.0 on pci0
> pci13: <PCI bus> on pcib13
> pcib14: <PCI-PCI bridge> mem 0xa5000000-0xa5003fff irq 19 at device 0.0 on pci13
> pci14: <PCI bus> on pcib14
> pcib15: <PCI-PCI bridge> irq 16 at device 1.0 on pci14
> pci15: <PCI bus> on pcib15
> pcib16: <PCI-PCI bridge> irq 17 at device 2.0 on pci14
> pci16: <PCI bus> on pcib16
> ath0: <Atheros AR9580> mem 0xa6000000-0xa601ffff irq 17 at device 0.0 on pci16
> ar9300_set_stub_functions: setting stub functions
> ar9300_set_stub_functions: setting stub functions
> ar9300_attach: calling ar9300_hw_attach
> ar9300_hw_attach: calling ar9300_eeprom_attach
> ar9300_flash_map: unimplemented for now
> Restoring Cal data from DRAM
> Restoring Cal data from EEPROM
> ar9300_hw_attach: ar9300_eeprom_attach returned 0
> ath0: RX status length: 48
> ath0: RX buffer size: 4096
> ath0: TX descriptor length: 128
> ath0: TX status length: 36
> ath0: TX buffers per descriptor: 4
> ar9300_freebsd_setup_x_tx_desc: called, 0x0/0, 0x0/0, 0x0/0
> ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries
> ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries
> ath0: [HT] enabling HT modes
> ath0: [HT] enabling short-GI in 20MHz mode
> ath0: [HT] 1 stream STBC receive enabled
> ath0: [HT] 1 stream STBC transmit enabled
> ath0: [HT] 3 RX streams; 3 TX streams
> ath0: AR9580 mac 448.4 RF5110 phy 3661.5
> ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
> pcib17: <PCI-PCI bridge> irq 18 at device 3.0 on pci14
> pci17: <PCI bus> on pcib17
> ath1: <Atheros AR9580> mem 0xa7000000-0xa701ffff irq 18 at device 0.0 on pci17
> ar9300_set_stub_functions: setting stub functions
> ar9300_set_stub_functions: setting stub functions
> ar9300_attach: calling ar9300_hw_attach
> ar9300_hw_attach: calling ar9300_eeprom_attach
> ar9300_flash_map: unimplemented for now
> Restoring Cal data from DRAM
> Restoring Cal data from EEPROM
> ar9300_hw_attach: ar9300_eeprom_attach returned 0
> ath1: RX status length: 48
> ath1: RX buffer size: 4096
> ath1: TX descriptor length: 128
> ath1: TX status length: 36
> ath1: TX buffers per descriptor: 4
> ar9300_freebsd_setup_x_tx_desc: called, 0x0/0, 0x0/0, 0x0/0
> ath1: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries
> ath1: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries
> ath1: [HT] enabling HT modes
> ath1: [HT] enabling short-GI in 20MHz mode
> ath1: [HT] 1 stream STBC receive enabled
> ath1: [HT] 1 stream STBC transmit enabled
> ath1: [HT] 3 RX streams; 3 TX streams
> ath1: AR9580 mac 448.4 RF5110 phy 1083.4
> ath1: 2GHz radio: 0x0000; 5GHz radio: 0x0000
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> cpu0 on motherboard
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 60706070600060a
> device_attach: est0 attach returned 6
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> cpu1 on motherboard
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 60706070600060a
> device_attach: est1 attach returned 6
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
> Event timer "RTC" frequency 32768 Hz quality 0
> attimer0: <AT timer> at port 0x40 on isa0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> ppc0: cannot reserve I/O port range
> uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> uart0: console (9600,n,8,1)
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 60706070600060a
> device_attach: est0 attach returned 6
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 60706070600060a
> device_attach: est1 attach returned 6
> Timecounters tick every 1.000 msec
> random: unblocking device.
> usbus0: 12Mbps Full Speed USB v1.0
> usbus1: 12Mbps Full Speed USB v1.0
> ugen0.1: <0x8086> at usbus0
> uhub0: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> ugen1.1: <0x8086> at usbus1
> uhub1: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> usbus2: 12Mbps Full Speed USB v1.0
> usbus3: 480Mbps High Speed USB v2.0
> ugen2.1: <0x8086> at usbus2
> uhub2: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
> ugen3.1: <Intel> at usbus3
> uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
> usbus4: 12Mbps Full Speed USB v1.0
> uhub0: 1 port with 1 removable, self powered
> ugen4.1: <0x8086> at usbus4
> uhub4: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
> uhub1: 1 port with 1 removable, self powered
> usbus5: 12Mbps Full Speed USB v1.0
> uhub2: 1 port with 1 removable, self powered
> ugen5.1: <0x8086> at usbus5
> uhub5: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
> usbus6: 12Mbps Full Speed USB v1.0
> usbus7: 480Mbps High Speed USB v2.0
> ugen6.1: <0x8086> at usbus6
> uhub6: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
> uhub4: 1 port with 1 removable, self powered
> ugen7.1: <Intel> at usbus7
> uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
> ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
> uhub5: 1 port with 1 removable, self powered
> ada0: uhub6: 1 port with 1 removable, self powered
> <ADATA XM13 30GB 332ABBF0> ATA-8 SATA 2.x device
> ada0: Serial Number 02512013500300001076
> ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada0: Command Queueing enabled
> ada0: 28626MB (58626288 512 byte sectors: 16H 63S/T 16383C)
> ada0: Previously was known as ad4
> SMP: AP CPU #1 Launched!
> Timecounter "TSC" frequency 600012906 Hz quality 1000
> Root mount waiting for: usbus7 usbus3
> uhub3: 3 ports with 3 removable, self powered
> uhub7: 3 ports with 3 removable, self powered
> Trying to mount root from ufs:/dev/ada0p2 [rw]...
> bridge0: Ethernet address: 02:b1:ae:74:0b:00
> wlan0: Ethernet address: 04:f0:21:04:5d:7a
> ath0: stuck beacon; resetting (bmiss count 4)
> ath0: stuck beacon; resetting (bmiss count 0)
> wlan1: Ethernet address: 04:f0:21:04:5d:65
>
> If anyone has an idea on what is wrong or what needs to be
> reported/tested to find out and fix this please let me know.
>
> --
> --
> =====================================================
> Christophe Prevotaux
> Email: c.prevotaux at rural-networks.com
> Tel : +33 06 79 11 86 58
> =====================================================
>
> _______________________________________________
> freebsd-wireless at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe at freebsd.org"
More information about the freebsd-wireless
mailing list