Issues with urtwn

[Matthias Apitz]

El día Friday, December 19, 2014 a las 08:13:25AM -0800, Adrian Chadd escribió:

> Right, it's going into "stopped" mode, rather than "completed". It's
> expecting there to be something that'll take the VAP out of power save
> state, but nothing ever happens to do so.
> 
> ok. I think I have enough information to track down a fix. Thanks!

OK, let me know if I should do more tests or test some patches.

Btw: I have another USB Wifi dongle which attaches to the rsu(4) driver
as:

Dec 20 10:42:48 unixarea kernel: ugen4.3: <vendor 0x0bda> at usbus4
Dec 20 10:42:48 unixarea kernel: rsu0: <vendor 0x0bda product 0x8172, class 0/0, rev 2.00/2.00, addr 3> on usbus4
Dec 20 10:42:48 unixarea kernel: rsu0: MAC/BB RTL8712 cut 3
Dec 20 10:42:49 unixarea kernel: wlan0: Ethernet address: 00:0d:09:a1:2e:16
Dec 20 10:42:49 unixarea wpa_supplicant[2091]: Successfully initialized wpa_supplicant
Dec 20 10:42:53 unixarea wpa_supplicant[2092]: wlan0: Trying to associate with 00:13:f7:0d:08:48 (SSID='tarara' freq=2442 MHz)
Dec 20 10:42:54 unixarea wpa_supplicant[2092]: wlan0: Associated with 00:13:f7:0d:08:48
Dec 20 10:42:54 unixarea kernel: wlan0: link state changed to UP

and this does work smoothly at home, it does not run any bgscan. I was
expecting the same problem. Why is this running fine w/o bgscan?

Thanks

	matthias


-- 
Matthias Apitz, guru at unixarea.de, http://www.unixarea.de/ +49-170-4527211
1989-2014: The Wall was torn down so that we go to war together again.
El Muro ha sido derribado para que nos unimos en ir a la guerra otra vez.
Diese Grenze wurde aufgehoben damit wir gemeinsam wieder in den Krieg ziehen.