FreeBSD current RT3071 can't connect to 5G network

[Miguel Clara]

Duh, I figured it out... by default the Asus Guest netwroks are created in
"auto" mode, so both N and legacy, while my 5G network was set to N only
(2.4 is set to auto too).

This also explain the poor performance now... for some reason 11n is not
working only 11g/a.

ifconfig wlan0 mode 11na or 11ng gives me device is not configured (This
works fine for the ath card tough)!


Melhores Cumprimentos // Best Regards
-----------------------------------------------
*Miguel Clara*
*IT - Sys Admin & Developer*
*E-mail:    *miguelmclara at gmail.com
         www.linkedin.com/in/miguelmclara/


On Thu, Aug 14, 2014 at 2:13 PM, Miguel Clara <miguelmclara at gmail.com>
wrote:

>
>
> On Wed, Aug 13, 2014 at 7:10 PM, Miguel Clara <miguelmclara at gmail.com>
> wrote:
>
>> Hi, just wanted to report that the patch made no difference.
>>
>> However I created a guest network in my router with the same password and
>> also using WPA2, and it connects to it.
>>
>> the only difference is the BSSID, so I wonder if this is a issue with wpa
>> and nothing to to with the driver?
>>
>
> NOTE: it works well if using ath driivers so the problem is probably in
> the driver indeed!
>
>
>> But the performance is still horrible!
>>
>>
>>
>>
>