FreeBSD current RT3071 can't connect to 5G network
Miguel Clara
miguelmclara at gmail.com
Tue Aug 12 12:03:24 UTC 2014
Sorry for the delay in replying, I was out of the office for the last week,
I'm recompiling now to try this and will give feedback ASAP.
Melhores Cumprimentos // Best Regards
-----------------------------------------------
*Miguel Clara*
*IT - Sys Admin & Developer*
*E-mail: *miguelmclara at gmail.com
www.linkedin.com/in/miguelmclara/
On Tue, Aug 5, 2014 at 10:26 AM, Kevin Lo <kevlo at freebsd.org> wrote:
> On Sun, Aug 03, 2014 at 11:05:54PM +0800, Kevin Lo wrote:
> >
> > On Tue, Jul 29, 2014 at 11:35:00PM +0100, Miguel Clara wrote:
> > > Hi,
> >
> > Hi Miguel,
> >
> > >
> > > I just brought a TP-Link N600 Wireless Dual Band USB Adpater (model
> > > TL-WDN3200) and its correctly recognized in FreeBSD as a ranlink.
> > >
> > > Dmesg shows:
> > > wlan0: Ethernet address: e8:94:f6:12:98:9d
> > > run0: firmware RT3071 ver. 0.33 loaded
> > >
> > >
> > > So the module and firmware seem to be loaded fine and I'm able to
> connect
> > > to my 2.4g wireless fine.
> > >
> > > However I'm having no luck connecting to the 5G network, I've pasted
> the
> > > scans and wpa_supplicant log, and I see:
> > > "wlan0: Authentication with 60:a4:4c:28:13:c4 timed out.
> > > Added BSSID 60:a4:4c:28:13:c4 into blacklist"
> > > which I'm guessing means that for some reason the auth time-out, but I
> > > don't really know why, all other 5G devices connect fine!
> > >
> > > (Also if its important the router is a RT-N66U running the latest
> > > Asus-Merlin firmware)
> > >
> > >
> > > First Scan:
> > >
> > > ~% ifconfig wlan0 scan
> > > SSID/MESH ID BSSID CHAN RATE S:N INT CAPS
> > > ****** a4:b1:e9:ef:1c:68 1 54M -36:-68 100 EP RSN
> HTCAP
> > > WPS WPA WME
> > > ****** 9c:97:26:34:b7:cd 11 54M -41:-78 100 EP RSN
> HTCAP
> > > WPS WPA WME
> > > ****** 24:ec:99:39:4a:12 11 54M -33:-62 100 EP RSN
> HTCAP
> > > WPS WPA WME
> > > ****** 26:ec:99:39:4a:13 11 54M -31:-60 100 ES HTCAP
> WME
> > > ****** 10:fe:ed:c3:77:51 7 54M -40:-76 100 EPS RSN
> HTCAP
> > > WPA WME ATH WPS
> > > Mynetwork5G 60:a4:4c:28:13:c4 44 54M -12:-20 100 EP RSN
> HTCAP WME
> > >
> > > Second Scan
> > >
> > > % ifconfig wlan0 scan
> > > SSID/MESH ID BSSID CHAN RATE S:N INT CAPS
> > > ****** a4:b1:e9:ef:1c:68 1 54M -36:-68 100 EP RSN
> HTCAP
> > > WPS WPA WME
> > > ****** 9c:97:26:34:b7:cd 11 54M -41:-78 100 EP RSN
> HTCAP
> > > WPS WPA WME
> > > ****** 24:ec:99:39:4a:12 11 54M -33:-62 100 EP RSN
> HTCAP
> > > WPS WPA WME
> > > ****** 26:ec:99:39:4a:13 11 54M -31:-60 100 ES HTCAP
> WME
> > > ****** 10:fe:ed:c3:77:51 7 54M -40:-76 100 EPS RSN
> HTCAP
> > > WPA WME ATH WPS
> > > Mynetwork5G 60:a4:4c:28:13:c4 44 54M -12:-20 100 EP RSN
> HTCAP WME
> > > Mynetwork 60:a4:4c:28:13:c0 3 54M -18:-32 100 EP RSN
> HTCAP WME
> > >
> > >
> > > log from --> wpa_supplicant -i wlano -c /etc/wpa_supplicant.conf -d
> > > NOTE: while doing this in wpa_supplicant.conf I only have my 5g
> network!
> >
> > I have the same wlan dongle as yours but I have no problems connecting to
> > the TL-WDR4300 on the 5 GHz band. This email is sent over the 5 GHz.
> > I'll investigate further, thanks.
> >
> > # dmesg | grep run0
> > run0: <1.0> on usbus0
> > run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R), address
> > f8:1a:67:2a:df:3f
> > run0: firmware RT3071 ver. 0.33 loaded
> >
> > # ifconfig wlan0
> > wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
> 1500
> > ether f8:1a:67:2a:df:3f
> > inet 192.168.0.101 netmask 0xffffff00 broadcast 192.168.0.255
> > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> > media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11a
> > status: associated
> > ssid wng_5g channel 149 (5745 MHz 11a) bssid 64:66:b3:c2:3b:d4
> > country US authmode WPA2/802.11i privacy ON deftxkey UNDEF
> > TKIP 2:128-bit txpower 0 bmiss 7 mcastrate 6 mgmtrate 6
> > scanvalid 60
> > wme roaming MANUAL
>
> Please try Akinori Furukoshi's patch, thanks.
>
> Index: sys/dev/usb/wlan/if_run.c
> ===================================================================
> --- sys/dev/usb/wlan/if_run.c (revision 269566)
> +++ sys/dev/usb/wlan/if_run.c (working copy)
> @@ -3255,13 +3255,13 @@ run_set_tx_desc(struct run_softc *sc, struct run_t
> txwi = (struct rt2860_txwi *)(txd + 1);
> txwi->len = htole16(m->m_pkthdr.len - pad);
> if (rt2860_rates[ridx].phy == IEEE80211_T_DS) {
> - txwi->phy = htole16(RT2860_PHY_CCK);
> + mcs |= RT2860_PHY_CCK;
> if (ridx != RT2860_RIDX_CCK1 &&
> (ic->ic_flags & IEEE80211_F_SHPREAMBLE))
> mcs |= RT2860_PHY_SHPRE;
> } else
> - txwi->phy = htole16(RT2860_PHY_OFDM);
> - txwi->phy |= htole16(mcs);
> + mcs |= RT2860_PHY_OFDM;
> + txwi->phy = htole16(mcs);
>
> /* check if RTS/CTS or CTS-to-self protection is required */
> if (!IEEE80211_IS_MULTICAST(wh->i_addr1) &&
> @@ -3338,7 +3338,7 @@ run_tx(struct run_softc *sc, struct mbuf *m, struc
>
> /* pickup a rate index */
> if (IEEE80211_IS_MULTICAST(wh->i_addr1) ||
> - type != IEEE80211_FC0_TYPE_DATA) {
> + type != IEEE80211_FC0_TYPE_DATA || m->m_flags & M_EAPOL) {
> ridx = (ic->ic_curmode == IEEE80211_MODE_11A) ?
> RT2860_RIDX_OFDM6 : RT2860_RIDX_CCK1;
> ctl_ridx = rt2860_rates[ridx].ctl_ridx;
> @@ -4998,7 +4998,7 @@ run_updateprot_cb(void *arg)
> tmp = RT2860_RTSTH_EN | RT2860_PROT_NAV_SHORT |
> RT2860_TXOP_ALLOW_ALL;
> /* setup protection frame rate (MCS code) */
> tmp |= (ic->ic_curmode == IEEE80211_MODE_11A) ?
> - rt2860_rates[RT2860_RIDX_OFDM6].mcs :
> + rt2860_rates[RT2860_RIDX_OFDM6].mcs | RT2860_PHY_OFDM :
> rt2860_rates[RT2860_RIDX_CCK11].mcs;
>
> /* CCK frames don't require protection */
>
More information about the freebsd-wireless
mailing list