Atheros 9220 don't return from S3 state
Slawa Olhovchenkov
slw at zxy.spb.ru
Sun Jan 13 21:40:13 UTC 2013
On Sun, Jan 13, 2013 at 04:32:16PM -0500, Adrian Chadd wrote:
> Ok. So don't use that :)
>
> I'll dig up the pci hostif registers and see what I can find. But, hm. We should dump and compare the pci conf registers for the bridge that device is on.
>
If it is
pcib3 at pci0:0:30:0: class=0x060401 card=0x12e310cf chip=0x24488086 rev=0xd4 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Mobile PCI Bridge'
class = bridge
subclass = PCI-PCI
(other bridge is PCI Express) -- I don't find difference between
'boot' and 'resume'.
> Adrian
>
> Adrian
>
>
>
> Sent from my Palm Pre on AT&T
> On Jan 13, 2013 4:25 PM, Slawa Olhovchenkov <slw at zxy.spb.ru> wrote:
>
> On Sun, Jan 13, 2013 at 12:19:22PM -0800, Adrian Chadd wrote:
>
>
>
> > On 13 January 2013 12:07, Slawa Olhovchenkov <slw at zxy.spb.ru> wrote:
>
> > > On Sun, Jan 13, 2013 at 11:43:55AM -0800, Adrian Chadd wrote:
>
> > >
>
> > >> Right. That should be a good indication.
>
> > >
>
> > > After 10 min card still hot.
>
> >
>
> > Ok, so that means the basic power lines are up and working.
>
> >
>
> > Ah, I did add in the force-wakeup hack code; it's just not enabled by default.
>
> >
>
> > Try editing sys/dev/ath/if_ath_pci.c ; look for:
>
> >
>
> > #ifdef ATH_PCI_WAKEUP_WAR
>
> >
>
> > .. and change that to
>
> >
>
> > #if 1
>
> >
>
> > Then recompile if_ath_pci and try that.
>
>
>
> After reboot not working:
>
>
>
> [228] ath0: device timeout
>
> [236] ath0: device timeout
>
> [245] ath0: device timeout
>
>
>
> PS: card more hot.
>
>
More information about the freebsd-wireless
mailing list