Atheros 9565 wifi problems

[Adrian Chadd]

Huh? 10.0 works fine on the 9565? Ive not changed anything in the ath
driver since then.

Adrian
On Dec 7, 2013 2:14 PM, "Peter Edson" <pete.edson at gmail.com> wrote:

> when I do the destroy, it says it wasn't already configured.
>
>  when I get to the supplicant part it says wpa_supplicant 1046 ioctl
> something something operation not supported.
>
> then it tried to associate for awhile and says ctrl-event-disconnected
> reason=3 local=1
>
> and authentication timed out
>
> I get ath0_edma_recv_tasklet: sc_interest_cnt > 0; skipping on the screen
> printed out alot.
>
>
> Anyway thanks for the help I guess I should just reinstall 10 beta 4 again
> since it was working?
>
> If this pops up again I guess i'll have to use windows for awhile :-( till
> this gets hammered out as my NIC and my wifi aren't working on freebsd at
> the moment, I guess this laptop is too new
>
>
> On Sat, Dec 7, 2013 at 12:47 PM, Adrian Chadd <adrian at freebsd.org> wrote:
>
>> It should be working. :(
>>
>> Try doing it all manually:
>>
>> * comment out wpa / ifconfig lines for wifi in /etc/rc.conf
>>
>> # ifconfig wlan0 destroy
>> # ifconfig wlan0 create wlandev ath0
>> # wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf &
>>
>> .. see if that works.
>>
>>
>>
>> -a
>>
>> On 7 December 2013 02:10, Peter Edson <pete.edson at gmail.com> wrote:
>> > here is my rc.conf /boot/loader.conf /etc/wpa_supplicant.conf and all
>> kernel
>> > output
>> >
>> >
>> >
>> >
>> > On Sat, Dec 7, 2013 at 1:22 AM, Adrian Chadd <adrian at freebsd.org>
>> wrote:
>> >>
>> >> What's logged in dmesg?
>> >>
>> >>
>> >> -a
>> >>
>> >> On 6 December 2013 20:56, Peter Edson <pete.edson at gmail.com> wrote:
>> >> > Hi, I installed freebsd 10 beta 4 today and it autodetected the
>> atheros
>> >> > 9565 chip and I got it setup no problem with wpa_supplicant. I
>> installed
>> >> > some stuff like xorg and i3 wm and then took a nap. I woke up and
>> >> > rebooted
>> >> > the machine and it will not work on any wifi settings now.
>> >> >
>> >> > It keeps throwing errors about /var/run/wpa_supplicant failed to
>> >> > initialize
>> >> > control interface and remove the file, this is when I run service
>> netif
>> >> > restart, start etc. I have tried removing it and it doesn't help.
>> >> >
>> >> > my pci conf for atheros looks like this:
>> >> >
>> >> > ath0 at pci0:3:0:0:
>> >> >
>> >> > class = 0x028000 card=0x063211ad chip=0x0036168c rev=0x01 hdr=0x00
>> >> >
>> >> > vendor= atheros communications
>> >> > device= ar9565 wireless network adapter
>> >> > class = network
>> >> > _______________________________________________
>> >> > freebsd-stable at freebsd.org mailing list
>> >> > http://lists.freebsd.org/mailman/listinfo/freebsd-stable
>> >> > To unsubscribe, send any mail to
>> >> > "freebsd-stable-unsubscribe at freebsd.org"
>> >
>> >
>>
>
>