New hardware, old problem: stuck beacon when here is WiFi traffic

[Lev Serebryakov]

Hello, Adrian.
You wrote 28 апреля 2013 г., 23:15:23:

AC> Yeah, can you see why 11n wasn't negotiated and repeat the test?
  Ok, rebooted both AP and client.
  Client/Windows says (via connection properties) it is "240Mbit/s",
  AP/FreeBSD says (via ifconfig list sta):

ADDR               AID CHAN RATE RSSI IDLE  TXSEQ  RXSEQ CAPS FLAG
c4:85:08:3f:9e:c2    1    3 270M 22.0    0  14972   4880 EPS  AQEHTRM SSID<home.serebryakov.spb.ru> RATES<B2,B4,B11,B22,12,18,24,36> XRATES<48,72,96,108> RSN<v1 mc:AES-CCMP uc:AES-CCMP km:8021X-PSK, caps 0x3c> HTCAP<cap 0x976 param 0x17 mcsset[0-15,32] extcap 0x0 txbf 0x0 antenna 0x0> WME<version 0x1 info 0x0>

  But throughput is no more than 30Mbit again...  It is very strange...

AC> I'll go over what you gave me but what you did give me has 500 frames
AC> in the TX queue. That's a lot of frames to go over. :)
  When I stop "sending" iperf "receiving" part shows some traffic for
 about 5 seconds after it :)

-- 
// Black Lion AKA Lev Serebryakov <lev at FreeBSD.org>