updates to ar9300_hal / driver, please test

[Raphael Kubo da Costa]

Adrian Chadd <adrian at freebsd.org> writes:

> On 4 April 2013 21:44, Adrian Chadd <adrian at freebsd.org> wrote:
>
>> ar9300 support:
>>
>> * updated to the latest internal HAL;
>> * added ar9300 tx power configuration support, so you can configure
>> lower tx power if you'd like.
>
> I've added in the bluetooth coexistence code, the bluetooth MCI
> coexistence code and removed the SoC (ie, embedded inside SoCs, rather
> than standalone NIC) support. When it's time to build wifi for AR933x,
> AR934x, AR955x, I'll re-enable it for those builds.
>
> Now, if you have an AR9485 or AR946x, please test this latest driver.
> I haven't _enabled_ the bluetooth coexistence code so bluetooth either
> will run badly, or it won't run at all (on AR9462 and later.) But it
> shouldn't have broken anything.

AR9485 here. I updated qcamain_open_hal_public to commit 89885db and
sys/dev/ath is at r249255.

Everything still works fine in my very common and not-demanding workflow
(ie. connecting to a WPA2 AP and using Bluetooth with a BT-USB Broadcom
adapter).