Wireless Ralink Adapter is detected but doesn't work

[Lars Engels]

Am 23.11.2012 15:21, schrieb Nikolay Tychina:
> Hi!
>
> I got TP-LINK TL-W727N adapter with a Ralink chipset, added
>
>     product RALINK RT5370           0x5370  RT5370 // to usbdevs
>     RUN_DEV(RALINK,             RT5370), // to if_run.c
> Re-built module, run0 interface then appeared in ifconfig. But if I 
> do
> "ifconfig wlan0 up", the command just hangs,
> there appear lines in dmesg:
> run0: firmware RT3071 ver. 0.236 loaded
> run0: at uhub3, port 5, addr 4 (disconnected)
> usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_STALLED,
> ignored)
> usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_STALLED,
> ignored)
> ugen1.4: <TPlink> at usbus1 (disconnected)
>
> Any way to get it working?


Is it connected to a hub or directly to a mainboard port?