kern/173636: [ath] ath1: bad series0 hwrate 0x0, tries 1 ts_status 0x0

[Johann Hugo]

On Sunday 18 November 2012 23:05:44 adrian at freebsd.org wrote:
> Synopsis: [ath] ath1: bad series0 hwrate 0x0, tries 1 ts_status 0x0
> 
> State-Changed-From-To: open->closed
> State-Changed-By: adrian
> State-Changed-When: Sun Nov 18 21:04:51 UTC 2012
> State-Changed-Why:
> This was fixed in r243047, tested by Rui and I.
> 
> 
> http://www.freebsd.org/cgi/query-pr.cgi?pr=173636
> _______________________________________________
> freebsd-wireless at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe at freebsd.org"

I'm still seeing it, right after switching from 11a to 11n.

11n:~ # ifconfig wlan1
ifconfig wlan1 channel 52:ht/20

wlan1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether 00:0c:42:6c:61:91
        inet 10.50.50.1 netmask 0xffffff00 broadcast 10.50.50.255 
        inet6 fe80::20c:42ff:fe6c:6191%wlan1 prefixlen 64 scopeid 0x7 
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: IEEE 802.11 Wireless Ethernet autoselect mode 11na <hostap>
        status: running
        ssid testAP channel 52 (5260 MHz 11a ht/20) bssid 00:0c:42:6c:61:91
        country US ecm authmode OPEN privacy OFF txpower 23 mcastrate 6
        mgmtrate 6 scanvalid 60 ampdulimit 64k ampdudensity 8 shortgi wme
        burst dtimperiod 1 -dfs

11n:~ # iperf -c 10.50.50.2
------------------------------------------------------------
Client connecting to 10.50.50.2, TCP port 5001
TCP window size: 40.5 KByte (default)
------------------------------------------------------------
[  3] local 10.50.50.1 port 35142 connected with 10.50.50.2 port 5001
ath1: ath_rate_tx_complete: ts_rate=0 ts_finaltsi=0
ath1: bad series0 hwrate 0x0, tries 1 ts_status 0x0
ath1: ath_rate_tx_complete: ts_rate=0 ts_finaltsi=0
ath1: bad series0 hwrate 0x0, tries 1 ts_status 0x0
ath1: ath_rate_tx_complete: ts_rate=0 ts_finaltsi=0
ath1: bad series0 hwrate 0x0, tries 1 ts_status 0x0
ath1: ath_rate_tx_complete: ts_rate=0 ts_finaltsi=0
ath1: bad series0 hwrate 0x0, tries 1 ts_status 0x0
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-10.0 sec  25.8 MBytes  21.5 Mbits/sec

The messages stops after transfering some data.

11n:~ # uname -a
FreeBSD 11n 10.0-CURRENT FreeBSD 10.0-CURRENT #8: Fri Nov 16 08:52:22 SAST 
2012     root at magrathea.meraka.csir.co.za:/var/scratch/10-
current/obj/arm.armeb/var/scratch/10-current/src/sys/SMALL-AVILA-ALTQ  arm

Johann