Please Test: Updated Ral Driver Patch for rt2860/rt3090

[matt]

On 03/10/12 18:23, Sevan / Venture37 wrote:
> On 10/03/2012 03:17, matt wrote:
>> Hi Folks! Thanks for the patience :)
>
> Hi Matt,
>
>> Here's the patch for HEAD:
>>
>> https://docs.google.com/open?id=0B6YlMzJxarGbR1lSZ0hnTEFSREt6MU1MbGFKeURhUQ 
>>
>
> The patch you linked to above had several errors which prevented it 
> from being built, I've cleaned things up & added them to a mercurial 
> repo https://bitbucket.org/sevan/ral/overview (you're welcome to have 
> write access Matt if you don't plan on hosting the files elsewhere)
>
> both directories just need to be copied to /usr/src/sys
>
>> You will see an invalid eeprom low-noise amplifier gain for low-noise
>> amplifiers you don't have. If it doesn't attach at all, send me your PCI
>> ids and we can add them to the attach code and see if they work.
>>
>> My expectation is everything from rt2860-rt3090 at least will work.
>
> The driver attaches but ifconfig wlan0 scan doesn't show any access 
> points
>
> ral0: <Ralink Technology RT2790> mem 0xf7f00000-0xf7f0ffff irq 17 at 
> device 0.0 on pci3
> ral0: invalid EEPROM LNA gain #2: 0x00
> ral0: invalid EEPROM LNA gain #3: 0x00
> ral0: invalid EEPROM powersave level
> ral0: MAC/BBP RT2860 (rev 0x28720200), RF RT3022 2.4G 2T2R
> ral0: skip channel 10, could not find extension channel
> ral0: skip channel 11, could not find extension channel
> ral0: skip channel 12, could not find extension channel
> ral0: skip channel 13, could not find extension channel
> ral0: skip channel 14, could not find extension channel
> ral0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> ral0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 
> 24Mbps 36Mbps 48Mbps 54Mbps
> ral0: 2T2R
> ral0: 11ng MCS 20MHz
> ral0: MCS 0-7: 6.5Mbps - 65Mbps
> ral0: MCS 8-15: 13Mbps - 130Mbps
> ral0: 11ng MCS 20MHz SGI
> ral0: MCS 0-7: 7Mbps - 72Mbps
> ral0: MCS 8-15: 14.5Mbps - 144.5Mbps
> ral0: 11ng MCS 40MHz:
> ral0: MCS 0-7: 13.5Mbps - 135Mbps
> ral0: MCS 8-15: 27Mbps - 270Mbps
> ral0: 11ng MCS 40MHz SGI:
> ral0: MCS 0-7: 15Mbps - 150Mbps
> ral0: MCS 8-15: 30Mbps - 300Mbps
>
> Sevan / Venture37
>
> _______________________________________________
> freebsd-wireless at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> To unsubscribe, send any mail to 
> "freebsd-wireless-unsubscribe at freebsd.org"
>
Re access points...try "ifconfig wlan0 create wlandev ral0"
ifconfig ral0 up (just in case...)
ifconfig wlan0 up
sleep 1
ifconfig wlan0 scan

I have seen it take a second for results to be available, i.e. "up scan" 
returns no list.

Re: errors:
Did you by chance build the module along with kernel or separately?

Matt