ath0: device timeout with 802.11n client

[Lev Serebryakov]

Hello, Adrian.
You wrote 22 июля 2012 г., 2:10:42:

>> AC> Hm. With debuggimg it works, but turning it off causes timeouts?
>>   I'll turn it off tomorrow and will see
AC> Thanks. If that's the case, it's quite likely a timing / race
AC> condition bug and even your debugging logs as they are will be very
AC> helpful.
 Again (without debug):

ath0: ath_tx_tid_bar_unsuspend: bar_tx=0, bar_wait=0: ?
ath0: device timeout
ath0: device timeout
ath0: device timeout
ath0: device timeout
ath0: device timeout
ath0: device timeout
ath0: device timeout
ath0: device timeout
ath0: device timeout
ath0: ath_tx_tid_drain: node 0xc404b000: bf=0xc34fda60: addbaw=0, dobaw=0, seqno=3113, retry=0
ath0: ath_tx_tid_drain: node 0xc404b000: bf=0xc34fda60: tid txq_depth=503 hwq_depth=0, bar_wait=0
ath0: ath_tx_tid_drain: node 0xc404b000: tid 0: txq_depth=1, txq_aggr_depth=0, sched=0, paused=-1, hwq_depth=0, incomp=0, baw_head=111, baw_tail=111 txa_start=3113, ni_txseqs=5107
FRDS 00:0c:42:64:69:92->70:d4:f2:ad:6a:26(00:0c:42:64:69:92) data QoS [TID 0] WEP [IV 29 0c 00 00 00 00 KID 0] 0M
 8862 0000 70d4 f2ad 6a26 000c 4264 6992 000c 4264 6992 90c2 0000 0101 290c 0020 0000 0000 aaaa 0300 0000 0800
ath0: stuck beacon; resetting (bmiss count 4)
ath0: stuck beacon; resetting (bmiss count 4)
ath0: stuck beacon; resetting (bmiss count 4)
ath0: stuck beacon; resetting (bmiss count 4)
ath0: stuck beacon; resetting (bmiss count 4)


-- 
// Black Lion AKA Lev Serebryakov <lev at FreeBSD.org>