ath0: device timeout on 9.0-STABLE

[Maciej Milewski]

Dnia środa, 25 stycznia 2012 09:13:26 Michal Vančo pisze:
> Hi,
> 
> thanks for your response.
> 
> Though there is one more thing. Is my adapter supposed to work in 5GHz band?
> I'm sure it works in windows and linux. Trying to switch to a different
> SSID (5GHz one) on the same AP, wlan0 stay unassociated (status: no
> carrier):
> 
> # ifconfig wlan0
> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
> 	ether 00:19:7e:52:1c:c4
> 	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> 	media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
> 	status: no carrier
> 	ssid "XXX (5 GHz)" channel 36 (5180 MHz 11a)
> 	regdomain ETSI2 country SK indoor ecm authmode WPA2/802.11i
> 	privacy ON deftxkey UNDEF txpower 17 bmiss 7 mcastrate 6 mgmtrate 6
> 	scanvalid 450 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7
> 	roam:rate 12 wme burst roaming MANUAL
> 
It allowed you to set the 5GHz channel so it supports that if it wasn't be 
supporting it would complain:

#ifconfig wlan0 mode 11a
ifconfig: SIOCSIFMEDIA (media): Device not configured

try if ifconfig wlan0 scan or ifconfig wlan0 list scan shows you some 
networks.

-- 
Pozdrawiam,
Maciej Milewski