iwn0/wlan0 scan WPA2-PSK/AES as WEP on freebsd9

[Adrian Chadd]

And this is an example of it working? What's ifconfig wlan0 list sta show?


Adrian


On 8 August 2012 10:03, 乔楚 <honestqiao at gmail.com> wrote:
> 2012/8/8 Adrian Chadd <adrian at freebsd.org>:
>> Thanks, that will be very helpful.
>>
>> Adrian
>>
>> On Aug 7, 2012 8:32 PM, "乔楚/HonestQiao" <honestqiao at gmail.com> wrote:
>>>
>>> 2012-08-08 02:39, Adrian Chadd<adrian at freebsd.org> wrote:
>>> >So I've been digging into this a bit. I'm confused; the scan parameter
>>> >shouldn't HAVE the meshid/meshconf fields populated. The elemids
>>> >(0x71, 0x72) shouldn't even be there.
>>> >
>>> >Oh, but wait. You're running 9, right? The mesh elements are different.
>>> >
>>> >Would you mind taking another pcap, this time with the AP in non-11n
>>> >mode, where it works? I'd like to compare the beacon frame contents.
>>> >
>>> >Thanks,
>>> >
>>> >
>>> >Adrian
>>>
>>> I'm running 9.1-PRERELEASE.
>>> I'll take an new pcap with non-11n mode today night(My localtime).
>>>
>>
>
> tty0:
> ifconfig wlan0 down
>
> tty1:
> tcpdump -ni wlan0 -y IEEE802_11_RADIO -s0 -l -v -w pcap.out
>
> tty0:
> ifconfig wlan0 up list scan
> ifconfig wlan0 up list scan
> wpa_supplicant -s -i wlan0 -c /etc/wpa_supplicant.conf
>
> # ifconfig -v wlan0 up list scan | grep ef:d4
> 0x0b001300000000000000           8c:21:0a:43:ef:d4   11   54M -63:-95
> 100 EPS  SSID<OpenBSD> RATES<B2,B4,B11,B22,12,18,24,36> DSPARMS<11>
> ERP<0x0> RSN<v1 mc:AES-CCMP uc:AES-CCMP km:8021X-PSK>
> XRATES<48,72,96,108> HTCAP<cap 0x18d param 0x3 mcsset[0-15] extcap
> 0x400 txbf 0xde7e606 antenna 0x0> MESHCONF<PATH:UNKNOWN LINK:UNKNOWN
> CONGESTION:UNKNOWN SYNC:UNKNOWN AUTH:UNKNOWN FORM:0x0 CAPS:0x0>
> HTINFO<ctl 11, 0,13,0,0 basicmcs[]> MESHID<0x0b00130000000000000.>
> ???<4a0e14000a002c01c800140005001900> ???<7f0101> ATH<0x7fff>
> WPS<v:1.0 st:C uuid-e:00-01-02-03-04-05-06-07-08-09-0a-0b-0c-0d-0e-0f>