AR9280: ar5416PerCalibrationN: NF calibration didn't finish; delaying CCA

[Lev Serebryakov]

Hello, Adrian.
You wrote 27 октября 2011 г., 6:42:01:

>> ar5416PerCalibrationN: NF calibration didn't finish; delaying CCA
> Ignore that. It's fine.
  and under load:

ath0: stuck beacon; resetting (bmiss count 4)
ath0: stuck beacon; resetting (bmiss count 4)
ar5212StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
ath0: stuck beacon; resetting (bmiss count 4)
ath0: stuck beacon; resetting (bmiss count 4)
ath0: stuck beacon; resetting (bmiss count 4)
ath0: stuck beacon; resetting (bmiss count 4)
ath0: stuck beacon; resetting (bmiss count 4)
ath0: stuck beacon; resetting (bmiss count 4)
ath0: stuck beacon; resetting (bmiss count 4)
ath0: stuck beacon; resetting (bmiss count 4)
ath0: stuck beacon; resetting (bmiss count 4)
ath0: stuck beacon; resetting (bmiss count 4)
ath0: stuck beacon; resetting (bmiss count 4)
ar5212StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
ath0: stuck beacon; resetting (bmiss count 4)
ath0: stuck beacon; resetting (bmiss count 4)
ar5212StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
ath0: stuck beacon; resetting (bmiss count 4)
ath0: stuck beacon; resetting (bmiss count 4)


 It is AR9280, HostAP, 802.11ng mode, ht/20 channel, 802.11g client
(only one).

  9-STABLE (RC2), updated yesterday.


-- 
// Black Lion AKA Lev Serebryakov <lev at FreeBSD.org>