Can't system_powerdown in qemu-system-aarch64 monitor
KIRIYAMA Kazuhiko
kiri at truefc.org
Tue Jun 30 02:47:07 UTC 2020
On Fri, 19 Jun 2020 09:23:20 +0900,
KIRIYAMA Kazuhiko wrote:
>
> Hi, all
>
> I'm wondering why system_powerdown can not be worked but
> system_reset can work on qemu-system-aarch64. I set up
> FreeBSD 13.0-CURRENT-arm64-aarch66 as follows:
>
> root at vm:~ # uname -a
> FreeBSD vm.truefc.org 13.0-CURRENT FreeBSD 13.0-CURRENT #0 r353025: Thu Oct 3 19:38:47 JST 2019 admin at vm.truefc.org:/ds/obj/current/13.0/r353025/ds/src/current/13.0/r353025/amd64.amd64/sys/GENERIC amd64
> root at vm:~ # qemu-system-aarch64 -version
> QEMU emulator version 4.1.0
> Copyright (c) 2003-2019 Fabrice Bellard and the QEMU Project developers
> root at vm:~ # ifconfig
> igb0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 9000
> options=4a520b9<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,NOMAP>
> ether 0c:c4:7a:b3:cf:d4
> inet 36.52.212.2 netmask 0xfffffff8 broadcast 36.52.212.7
> media: Ethernet autoselect (1000baseT <full-duplex>)
> status: active
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> igb1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 9000
> options=4e523bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6,NOMAP>
> ether 0c:c4:7a:b3:cf:d5
> inet 192.168.1.17 netmask 0xffffff00 broadcast 192.168.1.255
> media: Ethernet autoselect (1000baseT <full-duplex>)
> status: active
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
> options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
> inet6 ::1 prefixlen 128
> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
> inet 127.0.0.1 netmask 0xff000000
> groups: lo
> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
> vm-public: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 9000
> ether 9e:58:86:f8:e7:11
> id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
> maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
> root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
> member: tap0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
> ifmaxaddr 0 port 6 priority 128 path cost 2000000
> member: igb0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
> ifmaxaddr 0 port 1 priority 128 path cost 20000
> groups: bridge vm-switch viid-4c918@
> nd6 options=1<PERFORMNUD>
> vm-local: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 9000
> ether d6:e6:99:60:b6:a5
> id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
> maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
> root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
> member: igb1 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
> ifmaxaddr 0 port 2 priority 128 path cost 20000
> groups: bridge vm-switch viid-f5dda@
> nd6 options=1<PERFORMNUD>
> tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 9000
> description: vmnet-mftpkx-0-public
> options=80000<LINKSTATE>
> ether 58:9c:fc:10:ff:df
> groups: tap vm-port
> media: Ethernet autoselect
> status: active
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> Opened by PID 1427
> root at vm:~ # ifconfig tap create
> tap1
> root at vm:~ # ifconfig tap1 mtu 9000
> root at vm:~ # ifconfig vm-local addm tap1
> root at vm:~ # ifconfig tap1 up
> root at vm:~ # ifconfig
> igb0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 9000
> options=4a520b9<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,NOMAP>
> ether 0c:c4:7a:b3:cf:d4
> inet 36.52.212.2 netmask 0xfffffff8 broadcast 36.52.212.7
> media: Ethernet autoselect (1000baseT <full-duplex>)
> status: active
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> igb1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 9000
> options=4a520b9<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,NOMAP>
> ether 0c:c4:7a:b3:cf:d5
> inet 192.168.1.17 netmask 0xffffff00 broadcast 192.168.1.255
> media: Ethernet autoselect (1000baseT <full-duplex>)
> status: active
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
> options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
> inet6 ::1 prefixlen 128
> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
> inet 127.0.0.1 netmask 0xff000000
> groups: lo
> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
> vm-public: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 9000
> ether 9e:58:86:f8:e7:11
> id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
> maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
> root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
> member: tap0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
> ifmaxaddr 0 port 6 priority 128 path cost 2000000
> member: igb0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
> ifmaxaddr 0 port 1 priority 128 path cost 20000
> groups: bridge vm-switch viid-4c918@
> nd6 options=1<PERFORMNUD>
> vm-local: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 9000
> ether d6:e6:99:60:b6:a5
> id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
> maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
> root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
> member: tap1 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
> ifmaxaddr 0 port 7 priority 128 path cost 2000000
> member: igb1 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
> ifmaxaddr 0 port 2 priority 128 path cost 20000
> groups: bridge vm-switch viid-f5dda@
> nd6 options=1<PERFORMNUD>
> tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 9000
> description: vmnet-mftpkx-0-public
> options=80000<LINKSTATE>
> ether 58:9c:fc:10:ff:df
> groups: tap vm-port
> media: Ethernet autoselect
> status: active
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> Opened by PID 1427
> tap1: flags=8903<UP,BROADCAST,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 9000
> options=80000<LINKSTATE>
> ether 58:9c:fc:10:86:31
> groups: tap
> media: Ethernet autoselect
> status: no carrier
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> root at vm:~ # qemu-system-aarch64 -machine virt -cpu cortex-a57 -m 8G -name tbedafc -uuid d83448d8-a537-11ea-b7ba-0cc47ab3cfd4 -device virtio-blk-device,drive=hd0 -drive if=none,format=raw,file=/vm/tbedafc/disk0.img,id=hd0 -hdc /vm/.iso/FreeBSD-13.0-CURRENT-arm64-aarch64-20200514-r361019-memstick.img -nographic -netdev tap,id=net0,ifname=tap1 -device virtio-net-device,netdev=net0,mac=58:9c:fc:0a:be:3a -serial telnet::4444,server,nowait,nodelay -monitor telnet::4445,server,nowait,nodelay -watchdog i6300esb -watchdog-action poweroff -bios /vm/.config/QEMU_EFI.fd
> WARNING: Image format was not specified for '/vm/.iso/FreeBSD-13.0-CURRENT-arm64-aarch64-20200514-r361019-memstick.img' and probing guessed raw.
> Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
> Specify the 'raw' format explicitly to remove the restrictions.
>
> And then connected FreeBSD guest and confirmed PCI
> connection of 6300ESB Watchdog Timer as follows:
>
> root at vm:~ # telnet localhost 4444
> Trying 127.0.0.1...
> Connected to localhost.
> Escape character is '^]'.
>
>
> FreeBSD/arm64 (Amnesiac) (ttyu0)
>
> login: root
> Last login: Thu Jun 18 16:55:02 on ttyu0
> FreeBSD 13.0-CURRENT (GENERIC) #0 r361019: Thu May 14 03:59:37 UTC 2020
>
> Welcome to FreeBSD!
>
> Release Notes, Errata: https://www.FreeBSD.org/releases/
> Security Advisories: https://www.FreeBSD.org/security/
> FreeBSD Handbook: https://www.FreeBSD.org/handbook/
> FreeBSD FAQ: https://www.FreeBSD.org/faq/
> Questions List: https://lists.FreeBSD.org/mailman/listinfo/freebsd-questions/
> FreeBSD Forums: https://forums.FreeBSD.org/
>
> Documents installed with the system are in the /usr/local/share/doc/freebsd/
> directory, or can be installed later with: pkg install en-freebsd-doc
> For other languages, replace "en" with a language code like de or fr.
>
> Show the version of FreeBSD installed: freebsd-version ; uname -a
> Please include that output and any error messages when posting questions.
> Introduction to manual pages: man man
> FreeBSD directory layout: man hier
>
> Edit /etc/motd.template to change this login announcement.
> root@:~ # uname -a
> FreeBSD 13.0-CURRENT FreeBSD 13.0-CURRENT #0 r361019: Thu May 14 03:59:37 UTC 2020 root at releng1.nyi.freebsd.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
> root@:~ # pciconf -lv
> hostb0 at pci0:0:0:0: class=0x060000 rev=0x00 hdr=0x00 vendor=0x1b36 device=0x0008 subvendor=0x1af4 subdevice=0x1100
> vendor = 'Red Hat, Inc.'
> device = 'QEMU PCIe Host bridge'
> class = bridge
> subclass = HOST-PCI
> virtio_pci0 at pci0:0:1:0: class=0x010000 rev=0x00 hdr=0x00 vendor=0x1af4 device=0x1001 subvendor=0x1af4 subdevice=0x0002
> vendor = 'Red Hat, Inc.'
> device = 'Virtio block device'
> class = mass storage
> subclass = SCSI
> none0 at pci0:0:2:0: class=0x088000 rev=0x00 hdr=0x00 vendor=0x8086 device=0x25ab subvendor=0x1af4 subdevice=0x1100
> vendor = 'Intel Corporation'
> device = '6300ESB Watchdog Timer'
> class = base peripheral
> root@:~ #
hw.acpi.power_button_state does not set S5 but NONE:
root@:~ # sysctl -a|grep power
kern.shutdown.poweroff_delay: 5000
kern.powercycle_on_panic: 0
kern.poweroff_on_panic: 0
kern.vt.kbd_poweroff: 1
hw.acpi.power_button_state: NONE
hw.usb.disable_port_power: 0
hw.usb.power_timeout: 30
hw.usb.timings.extra_power_up_time: 20
hw.usb.timings.port_powerup_delay: 300
hw.pci.do_power_suspend: 1
hw.pci.do_power_resume: 1
hw.pci.do_power_nodriver: 0
hw.efi.poweroff: 1
root@:~ #
And try to set S5, but could not:
root@:~ # sysctl hw.acpi.power_button_state=S5
hw.acpi.power_button_state: NONE
sysctl: hw.acpi.power_button_state=S5: value is not available
root@:~ #
Power button seems set to acpi0:
root@:~ # grep Power /var/run/dmesg.boot
acpi0: Power Button (fixed)
psci0: <ARM Power State Co-ordination Interface Driver> on acpi0
acpi_button0: <Power Button> on acpi0
root@:~ #
Is there any suggetions how to set power management at
starting qemu ?
>
>
> Then connected to monitor and test system_powerdown but
> nothing happened but system_reset guest immediately
> rebooted:
>
> root at vm:~ # telnet localhost 4445
> Trying 127.0.0.1...
> Connected to localhost.
> Escape character is '^]'.
> QEMU 4.1.0 monitor - type 'help' for more information
> (qemu) system_powerdown
> (qemu) watchdog_action poweroff
> (qemu) system_powerdown
> (qemu) watchdog_action shutdown
> (qemu) system_powerdown
> (qemu) system_reset
> (qemu)
>
>
> What's wrong ?
>
> With Regards
> ---
> Kazuhiko Kiriyama <kiri at truefc.org>
> _______________________________________________
> freebsd-virtualization at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization
> To unsubscribe, send any mail to "freebsd-virtualization-unsubscribe at freebsd.org"
>
More information about the freebsd-virtualization
mailing list