[Bug 236922] Virtio fails as QEMU-KVM guest with Q35 chipset on Ubuntu 18.04.2 LTS
bugzilla-noreply at freebsd.org
bugzilla-noreply at freebsd.org
Mon Jan 13 19:00:06 UTC 2020
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=236922
--- Comment #36 from John Hartley <drum at graphica.com.au> ---
(In reply to Tommy P from comment #24)
Hi Tommy,
now I have networking workaround (disable netmap), I finally did update of my
12.0 VM to 12.1 and applied the VirtIO patch.
I successfully getting Virto devices in my PCI-e config:
# pciconf -lcve
hostb0 at pci0:0:0:0: class=0x060000 card=0x11001af4 chip=0x29c08086 rev=0x00
hdr=0x00
vendor = 'Intel Corporation'
device = '82G33/G31/P35/P31 Express DRAM Controller'
class = bridge
subclass = HOST-PCI
vgapci0 at pci0:0:1:0: class=0x030000 card=0x11001af4 chip=0x01001b36 rev=0x04
hdr=0x00
vendor = 'Red Hat, Inc.'
device = 'QXL paravirtual graphic card'
class = display
subclass = VGA
pcib1 at pci0:0:2:0: class=0x060400 card=0x00001b36 chip=0x000c1b36 rev=0x00
hdr=0x01
vendor = 'Red Hat, Inc.'
device = 'QEMU PCIe Root port'
class = bridge
subclass = PCI-PCI
cap 10[54] = PCI-Express 2 root port max data 128(128) ARI disabled
link x1(x1) speed 2.5(2.5) ASPM disabled(L0s)
slot 0 power limit 0 mW HotPlug(present) surprise Attn Button
PC(on) EI(disengaged)
cap 11[48] = MSI-X supports 1 message
Table in map 0x10[0x0], PBA in map 0x10[0x800]
cap 0d[40] = PCI Bridge card=0x00001b36
ecap 0001[100] = AER 2 0 fatal 0 non-fatal 0 corrected
ecap 000d[148] = ACS 1
pcib3 at pci0:0:2:1: class=0x060400 card=0x00001b36 chip=0x000c1b36 rev=0x00
hdr=0x01
vendor = 'Red Hat, Inc.'
device = 'QEMU PCIe Root port'
class = bridge
subclass = PCI-PCI
cap 10[54] = PCI-Express 2 root port max data 128(128) ARI disabled
link x1(x1) speed 2.5(2.5) ASPM disabled(L0s)
slot 0 power limit 0 mW HotPlug(present) surprise Attn Button
PC(on) EI(disengaged)
cap 11[48] = MSI-X supports 1 message
Table in map 0x10[0x0], PBA in map 0x10[0x800]
cap 0d[40] = PCI Bridge card=0x00001b36
ecap 0001[100] = AER 2 0 fatal 0 non-fatal 0 corrected
ecap 000d[148] = ACS 1
pcib4 at pci0:0:2:2: class=0x060400 card=0x00001b36 chip=0x000c1b36 rev=0x00
hdr=0x01
vendor = 'Red Hat, Inc.'
device = 'QEMU PCIe Root port'
class = bridge
subclass = PCI-PCI
cap 10[54] = PCI-Express 2 root port max data 128(128) ARI disabled
link x1(x1) speed 2.5(2.5) ASPM disabled(L0s)
slot 0 power limit 0 mW HotPlug(present) surprise Attn Button
PC(on) EI(disengaged)
cap 11[48] = MSI-X supports 1 message
Table in map 0x10[0x0], PBA in map 0x10[0x800]
cap 0d[40] = PCI Bridge card=0x00001b36
ecap 0001[100] = AER 2 0 fatal 0 non-fatal 0 corrected
ecap 000d[148] = ACS 1
pcib5 at pci0:0:2:3: class=0x060400 card=0x00001b36 chip=0x000c1b36 rev=0x00
hdr=0x01
vendor = 'Red Hat, Inc.'
device = 'QEMU PCIe Root port'
class = bridge
subclass = PCI-PCI
cap 10[54] = PCI-Express 2 root port max data 128(128) ARI disabled
link x1(x1) speed 2.5(2.5) ASPM disabled(L0s)
slot 0 power limit 0 mW HotPlug(present) surprise Attn Button
PC(on) EI(disengaged)
cap 11[48] = MSI-X supports 1 message
Table in map 0x10[0x0], PBA in map 0x10[0x800]
cap 0d[40] = PCI Bridge card=0x00001b36
ecap 0001[100] = AER 2 0 fatal 0 non-fatal 0 corrected
ecap 000d[148] = ACS 1
pcib6 at pci0:0:2:4: class=0x060400 card=0x00001b36 chip=0x000c1b36 rev=0x00
hdr=0x01
vendor = 'Red Hat, Inc.'
device = 'QEMU PCIe Root port'
class = bridge
subclass = PCI-PCI
cap 10[54] = PCI-Express 2 root port max data 128(128) ARI disabled
link x1(x1) speed 2.5(2.5) ASPM disabled(L0s)
slot 0 power limit 0 mW HotPlug(present) surprise Attn Button
PC(on) EI(disengaged)
cap 11[48] = MSI-X supports 1 message
Table in map 0x10[0x0], PBA in map 0x10[0x800]
cap 0d[40] = PCI Bridge card=0x00001b36
ecap 0001[100] = AER 2 0 fatal 0 non-fatal 0 corrected
ecap 000d[148] = ACS 1
uhci0 at pci0:0:29:0: class=0x0c0300 card=0x11001af4 chip=0x29348086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) USB UHCI Controller'
class = serial bus
subclass = USB
uhci1 at pci0:0:29:1: class=0x0c0300 card=0x11001af4 chip=0x29358086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) USB UHCI Controller'
class = serial bus
subclass = USB
uhci2 at pci0:0:29:2: class=0x0c0300 card=0x11001af4 chip=0x29368086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) USB UHCI Controller'
class = serial bus
subclass = USB
ehci0 at pci0:0:29:7: class=0x0c0320 card=0x11001af4 chip=0x293a8086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) USB2 EHCI Controller'
class = serial bus
subclass = USB
isab0 at pci0:0:31:0: class=0x060100 card=0x11001af4 chip=0x29188086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB (ICH9) LPC Interface Controller'
class = bridge
subclass = PCI-ISA
ahci0 at pci0:0:31:2: class=0x010601 card=0x11001af4 chip=0x29228086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI
mode]'
class = mass storage
subclass = SATA
cap 05[80] = MSI supports 1 message, 64 bit enabled with 1 message
cap 12[a8] = SATA Index-Data Pair
none0 at pci0:0:31:3: class=0x0c0500 card=0x11001af4 chip=0x29308086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801I (ICH9 Family) SMBus Controller'
class = serial bus
subclass = SMBus
pcib2 at pci0:1:0:0: class=0x060400 card=0x00000000 chip=0x000e1b36 rev=0x00
hdr=0x01
vendor = 'Red Hat, Inc.'
class = bridge
subclass = PCI-PCI
cap 05[8c] = MSI supports 1 message, 64 bit, vector masks
cap 01[84] = powerspec 3 supports D0 D3 current D0
cap 10[48] = PCI-Express 2 PCI bridge max data 128(128) ARI disabled
link x1(x1) speed 2.5(2.5) ASPM disabled(L0s)
cap 0c[40] = unknown
ecap 0001[100] = AER 2 0 fatal 0 non-fatal 0 corrected
vmx0 at pci0:2:1:0: class=0x020000 card=0x07b015ad chip=0x07b015ad rev=0x01
hdr=0x00
vendor = 'VMware'
device = 'VMXNET3 Ethernet Controller'
class = network
subclass = ethernet
cap 11[9c] = MSI-X supports 25 messages, enabled
Table in map 0x18[0x0], PBA in map 0x18[0x1000]
cap 05[84] = MSI supports 1 message, 64 bit
em0 at pci0:2:2:0: class=0x020000 card=0x11001af4 chip=0x100e8086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82540EM Gigabit Ethernet Controller'
class = network
subclass = ethernet
re0 at pci0:2:3:0: class=0x020000 card=0x11001af4 chip=0x813910ec rev=0x20
hdr=0x00
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL-8100/8101L/8139 PCI Fast Ethernet Adapter'
class = network
subclass = ethernet
vtpcim0 at pci0:3:0:0: class=0x010000 card=0x11001af4 chip=0x10421af4 rev=0x01
hdr=0x00
vendor = 'Red Hat, Inc.'
device = 'Virtio block device'
class = mass storage
subclass = SCSI
cap 11[dc] = MSI-X supports 2 messages, enabled
Table in map 0x14[0x0], PBA in map 0x14[0x800]
cap 09[c8] = vendor (length 20)
cap 09[b4] = vendor (length 20)
cap 09[a4] = vendor (length 16)
cap 09[94] = vendor (length 16)
cap 09[84] = vendor (length 16)
cap 01[7c] = powerspec 3 supports D0 D3 current D0
cap 10[40] = PCI-Express 2 endpoint max data 128(128)
link x1(x1) speed 2.5(2.5) ASPM disabled(L0s)
vtpcim1 at pci0:4:0:0: class=0x010000 card=0x11001af4 chip=0x10481af4 rev=0x01
hdr=0x00
vendor = 'Red Hat, Inc.'
device = 'Virtio SCSI'
class = mass storage
subclass = SCSI
cap 11[dc] = MSI-X supports 4 messages, enabled
Table in map 0x14[0x0], PBA in map 0x14[0x800]
cap 09[c8] = vendor (length 20)
cap 09[b4] = vendor (length 20)
cap 09[a4] = vendor (length 16)
cap 09[94] = vendor (length 16)
cap 09[84] = vendor (length 16)
cap 01[7c] = powerspec 3 supports D0 D3 current D0
cap 10[40] = PCI-Express 2 endpoint max data 128(128)
link x1(x1) speed 2.5(2.5) ASPM disabled(L0s)
vtpcim2 at pci0:5:0:0: class=0x00ff00 card=0x11001af4 chip=0x10451af4 rev=0x01
hdr=0x00
vendor = 'Red Hat, Inc.'
device = 'Virtio memory balloon'
class = old
cap 09[c8] = vendor (length 20)
cap 09[b4] = vendor (length 20)
cap 09[a4] = vendor (length 16)
cap 09[94] = vendor (length 16)
cap 09[84] = vendor (length 16)
cap 01[7c] = powerspec 3 supports D0 D3 current D0
cap 10[40] = PCI-Express 2 endpoint max data 128(128)
link x1(x1) speed 2.5(2.5) ASPM disabled(L0s)
vtpcim3 at pci0:6:0:0: class=0x010000 card=0x11001af4 chip=0x10421af4 rev=0x01
hdr=0x00
vendor = 'Red Hat, Inc.'
device = 'Virtio block device'
class = mass storage
subclass = SCSI
cap 11[dc] = MSI-X supports 2 messages, enabled
Table in map 0x14[0x0], PBA in map 0x14[0x800]
cap 09[c8] = vendor (length 20)
cap 09[b4] = vendor (length 20)
cap 09[a4] = vendor (length 16)
cap 09[94] = vendor (length 16)
cap 09[84] = vendor (length 16)
cap 01[7c] = powerspec 3 supports D0 D3 current D0
cap 10[40] = PCI-Express 2 endpoint max data 128(128)
link x1(x1) speed 2.5(2.5) ASPM disabled(L0s)
I was able to easily flip my Q35 SATA based 12.1 to VirtIO SCSI by editing
/etc/fstab and change SATA ada0p2, atap3 ... to SCSI da0p2, da01p3 ...
Simillary if I wanted to flip to direct VirtIO (rather than via VirtIO SCSI)
you need to edit your /etc/fstab mounts to use vtbd0p2, vtbd0p3 etc
So happy to report that VirtIO patch worked for me with 12.1 rebuilt kernel.
NOTE: the partition numbering here is due to using OVMF which results in FAT32
EFI partition always being on p1 hence root is on p2 in my case.
Thanks again for hard work.
Cheers,
John Hartley.
--
You are receiving this mail because:
You are the assignee for the bug.
More information about the freebsd-virtualization
mailing list