[Bug 241774] FreeBSD 11.3 & 12.0 has broken SCSI & Networking on KVM/QEMU Q35 with OVMF
bugzilla-noreply at freebsd.org
bugzilla-noreply at freebsd.org
Sun Jan 12 23:40:06 UTC 2020
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=241774
--- Comment #39 from MattS <matt at snowtrek.org> ---
On my Host OS unRAID 6.8.0, i440fx with seabios or OVFM FreeBSD just hangs on
boot. One of the unRAID developers (jonp) spent a little time on it, and was
also unsuccessful. It's possible that it's an unRAID specific issue. Not sure
at this point.
https://forums.unraid.net/topic/84692-freebsd-113-no-network-interface-after-upgrade/page/2/?tab=comments#comment-809306
I was able to get virtio NIC working on 12.1 with TommyP's patch. (Thank you!)
***************************************
What is/are the CPU/s for your host OS?
cat /proc/cpuinfo (unRAID 6.8 running Linux 4.19.88 kernel)
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 158
model name : Intel(R) Core(TM) i7-8700 CPU @ 3.20GHz
stepping : 10
microcode : 0xca
cpu MHz : 4299.634
cache size : 12288 KB
physical id : 0
siblings : 12
core id : 0
cpu cores : 6
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 22
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb
rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology
nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl
vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe
popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch
cpuid_fault invpcid_single pti ssbd ibrs ibpb stibp tpr_shadow vnmi
flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms
invpcid rtm mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1
xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp md_clear
flush_l1d
bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds
swapgs taa itlb_multihit
bogomips : 6384.00
clflush size : 64
cache_alignment : 64
address sizes : 39 bits physical, 48 bits virtual
power management:
***************************************
Libvirt version:
5.8.0
QEMU version:
4.1.1
***************************************
Did you verify that the relevant virtual technology features are enabled on the
host: IOMMU for AMD and VT/D (?) for Intel?
I'm not sure how to show this on unRAID, but VT/D is enabled and PCIe ACS
Override is enabled for better IMMO grouping. I have a variety of VMs and
Dockers working. Ubuntu, Windows 10, FreeBSD 11.2, MacOS, Kali Linux. Multiple
GPU's, NIC, audio, and USB cards passed through to VMs.
****************************************
How are you creating/managing your VMs on the host?
VM configuration is done via GUI (see attached) with an option to edit XML if
needed. By default, the template network adapter type is "virtio", I then have
to switch to XML view and change to e1000.
XML below is just a default configuration with NIC changed to e1000 (FreeBSD
11.3, Q35-4.1
<?xml version='1.0' encoding='UTF-8'?>
<domain type='kvm' id='21'>
<name>cylon20</name>
<uuid>522c2643-079b-7464-7120-70fdc2f7ec57</uuid>
<description>FreeBSD 11.3</description>
<metadata>
<vmtemplate xmlns="unraid" name="FreeBSD" icon="freebsd.png" os="freebsd"/>
</metadata>
<memory unit='KiB'>4194304</memory>
<currentMemory unit='KiB'>4194304</currentMemory>
<memoryBacking>
<nosharepages/>
</memoryBacking>
<vcpu placement='static'>4</vcpu>
<cputune>
<vcpupin vcpu='0' cpuset='1'/>
<vcpupin vcpu='1' cpuset='7'/>
<vcpupin vcpu='2' cpuset='5'/>
<vcpupin vcpu='3' cpuset='11'/>
</cputune>
<resource>
<partition>/machine</partition>
</resource>
<os>
<type arch='x86_64' machine='pc-q35-4.1'>hvm</type>
<loader readonly='yes'
type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader>
<nvram>/etc/libvirt/qemu/nvram/522c2643-079b-7464-7120-70fdc2f7ec57_VARS-pure-efi.fd</nvram>
</os>
<features>
<acpi/>
<apic/>
</features>
<cpu mode='host-passthrough' check='none'>
<topology sockets='1' cores='2' threads='2'/>
</cpu>
<clock offset='utc'>
<timer name='rtc' tickpolicy='catchup'/>
<timer name='pit' tickpolicy='delay'/>
<timer name='hpet' present='no'/>
</clock>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<devices>
<emulator>/usr/local/sbin/qemu</emulator>
<disk type='file' device='cdrom'>
<driver name='qemu' type='raw'/>
<source file='/mnt/user/isos/FreeBSD-11.3-RELEASE-amd64-dvd1.iso'/>
<backingStore/>
<target dev='hda' bus='sata'/>
<readonly/>
<boot order='2'/>
<alias name='sata0-0-0'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw' cache='writeback'/>
<source file='/mnt/user/domains/cylon20/vdisk1.img'/>
<backingStore/>
<target dev='hdc' bus='sata'/>
<boot order='1'/>
<alias name='sata0-0-2'/>
<address type='drive' controller='0' bus='0' target='0' unit='2'/>
</disk>
<controller type='pci' index='0' model='pcie-root'>
<alias name='pcie.0'/>
</controller>
<controller type='pci' index='1' model='pcie-root-port'>
<model name='pcie-root-port'/>
<target chassis='1' port='0x10'/>
<alias name='pci.1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'
multifunction='on'/>
</controller>
<controller type='pci' index='2' model='pcie-root-port'>
<model name='pcie-root-port'/>
<target chassis='2' port='0x11'/>
<alias name='pci.2'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02'
function='0x1'/>
</controller>
<controller type='pci' index='3' model='pcie-root-port'>
<model name='pcie-root-port'/>
<target chassis='3' port='0x12'/>
<alias name='pci.3'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02'
function='0x2'/>
</controller>
<controller type='pci' index='4' model='pcie-root-port'>
<model name='pcie-root-port'/>
<target chassis='4' port='0x13'/>
<alias name='pci.4'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02'
function='0x3'/>
</controller>
<controller type='virtio-serial' index='0'>
<alias name='virtio-serial0'/>
<address type='pci' domain='0x0000' bus='0x02' slot='0x00'
function='0x0'/>
</controller>
<controller type='sata' index='0'>
<alias name='ide'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x1f'
function='0x2'/>
</controller>
<controller type='usb' index='0' model='ich9-ehci1'>
<alias name='usb'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07'
function='0x7'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci1'>
<alias name='usb'/>
<master startport='0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'
multifunction='on'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci2'>
<alias name='usb'/>
<master startport='2'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07'
function='0x1'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci3'>
<alias name='usb'/>
<master startport='4'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07'
function='0x2'/>
</controller>
<interface type='bridge'>
<mac address='52:54:00:bc:6a:0e'/>
<source bridge='br0'/>
<target dev='vnet1'/>
<model type='e1000'/>
<alias name='net0'/>
<address type='pci' domain='0x0000' bus='0x01' slot='0x00'
function='0x0'/>
</interface>
<serial type='pty'>
<source path='/dev/pts/1'/>
<target type='isa-serial' port='0'>
<model name='isa-serial'/>
</target>
<alias name='serial0'/>
</serial>
<console type='pty' tty='/dev/pts/1'>
<source path='/dev/pts/1'/>
<target type='serial' port='0'/>
<alias name='serial0'/>
</console>
<channel type='unix'>
<source mode='bind'
path='/var/lib/libvirt/qemu/channel/target/domain-21-cylon20/org.qemu.guest_agent.0'/>
<target type='virtio' name='org.qemu.guest_agent.0'
state='disconnected'/>
<alias name='channel0'/>
<address type='virtio-serial' controller='0' bus='0' port='1'/>
</channel>
<input type='tablet' bus='usb'>
<alias name='input0'/>
<address type='usb' bus='0' port='1'/>
</input>
<input type='mouse' bus='ps2'>
<alias name='input1'/>
</input>
<input type='keyboard' bus='ps2'>
<alias name='input2'/>
</input>
<graphics type='vnc' port='5901' autoport='yes' websocket='5701'
listen='0.0.0.0' keymap='en-us'>
<listen type='address' address='0.0.0.0'/>
</graphics>
<video>
<model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1'
primary='yes'/>
<alias name='video0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01'
function='0x0'/>
</video>
<memballoon model='virtio'>
<alias name='balloon0'/>
<address type='pci' domain='0x0000' bus='0x03' slot='0x00'
function='0x0'/>
</memballoon>
</devices>
<seclabel type='dynamic' model='dac' relabel='yes'>
<label>+0:+100</label>
<imagelabel>+0:+100</imagelabel>
</seclabel>
</domain>
+++++++++++++++++++++++++++++++++++++++
-uuid 522c2643-079b-7464-7120-70fdc2f7ec57 \
-no-user-config \
-nodefaults \
-chardev socket,id=charmonitor,fd=37,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc,driftfix=slew \
-global kvm-pit.lost_tick_policy=delay \
-no-hpet \
-no-shutdown \
-boot strict=on \
-device
pcie-root-port,port=0x10,chassis=1,id=pci.1,bus=pcie.0,multifunction=on,addr=0x2
\
-device pcie-root-port,port=0x11,chassis=2,id=pci.2,bus=pcie.0,addr=0x2.0x1 \
-device pcie-root-port,port=0x12,chassis=3,id=pci.3,bus=pcie.0,addr=0x2.0x2 \
-device pcie-root-port,port=0x13,chassis=4,id=pci.4,bus=pcie.0,addr=0x2.0x3 \
-device ich9-usb-ehci1,id=usb,bus=pcie.0,addr=0x7.0x7 \
-device
ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pcie.0,multifunction=on,addr=0x7
\
-device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pcie.0,addr=0x7.0x1 \
-device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pcie.0,addr=0x7.0x2 \
-device virtio-serial-pci,id=virtio-serial0,bus=pci.2,addr=0x0 \
-drive
file=/mnt/user/isos/FreeBSD-11.3-RELEASE-amd64-dvd1.iso,format=raw,if=none,id=drive-sata0-0-0,readonly=on
\
-device ide-cd,bus=ide.0,drive=drive-sata0-0-0,id=sata0-0-0,bootindex=2 \
-drive
file=/mnt/user/domains/cylon20/vdisk1.img,format=raw,if=none,id=drive-sata0-0-2,cache=writeback
\
-device
ide-hd,bus=ide.2,drive=drive-sata0-0-2,id=sata0-0-2,bootindex=1,write-cache=on
\
-netdev tap,fd=41,id=hostnet0 \
-device e1000,netdev=hostnet0,id=net0,mac=52:54:00:bc:6a:0e,bus=pci.1,addr=0x0
\
-chardev pty,id=charserial0 \
-device isa-serial,chardev=charserial0,id=serial0 \
-chardev socket,id=charchannel0,fd=42,server,nowait \
-device
virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.qemu.guest_agent.0
\
-device usb-tablet,id=input0,bus=usb.0,port=1 \
-vnc 0.0.0.0:1,websocket=5701 \
-k en-us \
-device
qxl-vga,id=video0,ram_size=67108864,vram_size=67108864,vram64_size_mb=0,vgamem_mb=16,max_outputs=1,bus=pcie.0,addr=0x1
\
-device virtio-balloon-pci,id=balloon0,bus=pci.3,addr=0x0 \
-sandbox
on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \
-msg timestamp=o
+++++++++++++++++++++++++++++++++++++++
pciconf does not show any intel NIC device detected. (same with passed through
Intel NIC).
When I compile 11.3 kernel without NETMAP, I see NIC interface detected as
"none2 at pci0:1:0:0", but still does not work. (see attached)
See DMESG output screenshots. "em0: Unable to allocate bus resource: interrupt"
***************************************
Okay, I fail at adding attachments...
--
You are receiving this mail because:
You are the assignee for the bug.
More information about the freebsd-virtualization
mailing list